Search

To evaluate the performance of a prototype flexible transbronchial cryoprobe compared with that of percutaneous transthoracic cryoablation and to define cone-beam computed tomography (CT) imaging and pathology cryolesion features in an in vivo swine model. Transbronchial cryoablation was performed with a prototype flexible cryoprobe (3 central and 3 peripheral lung ablations in 3 swine) and compared with transthoracic cryoablation performed with a commercially available rigid cryoprobe (2 peripheral lung ablations in 1 swine). Procedural time and cryoablation success rates for endobronchial navigation and cryoneedle deployment were measured. Intraoperative cone-beam CT imaging features of cryolesions were characterized and correlated with gross pathology and hematoxylin and eosin–stained sections of the explanted cryolesions. The flexible cryoprobe was successfully navigated and delivered to each target through a steerable guiding sheath (6/6). At 4 minutes after ablation, 5 of 6 transbronchial and 2 of 2 transthoracic cryolesions were visible on cone-beam CT. The volumes on cone-beam CT images were 55.5 cm3 (SE ± 8.0) for central transbronchial ablations (n = 2), 72.5 cm3 (SE ± 8.1) for peripheral transbronchial ablations (n = 3), and 79.5 cm3 (SE ±11.6) for peripheral transthoracic ablations (n = 2). Pneumothorax developed in 1 animal after transbronchial ablation and during ablation in the transthoracic cryoablation. Images of cryoablation zones on cone-beam CT correlated well with the matched gross pathology and histopathology sections of the cryolesions. Transbronchial cryoablation with a flexible cryoprobe, delivered through a steerable guiding sheath, is feasible. Transbronchial cryoablation zones are imageable with cone-beam CT, with gross pathology and histopathology similar to those of transthoracic cryoablation. [Display omitted] [ABSTRACT FROM AUTHOR]

Purpose: To determine the true distribution of radiopaque beads (ROBs) after hepatic embolization in swine as imaged by micro-computed tomography (microCT) compared with in vivo cone-beam computerized tomography (CT) imaged at different kVp settings.Materials and Methods: Swine (n = 3) underwent hepatic transarterial embolization (n = 6) with the use of 70-150-μm ROBs under fluoroscopic guidance. After stasis, in vivo cone-beam CT was performed at 120, 100, and 80 kVp. The animal was euthanized, the liver resected, and microCT with 17 μm resolution performed on embolized tissue samples. The resulting cone-beam CT and microCT data were segmented and registered. Total vessel length, minimum volume-enclosing ellipsoid (MVEE), and number of independent volumes were measured. Maximum-intensity projections (MIPs) were generated for each cone-beam CT.Results: Metrics for all cone-beam CT segmentations differed significantly from microCT segmentations. Segmentations at 80 kVp presented significantly greater vessel length, MVEE, and number of independent volumes compared with 100 kVp and 120 kVp. In addition, 100 kVp segmentations presented significantly greater vessel length than 120 kVp. MIPs presented greater visualization than cone-beam CT segmentations and improved as kVp decreased.Conclusions: The full ROB distribution was more extensive than was apparent on cone-beam CT. Quantitative measures of embolic distribution demonstrated significantly better correlation with microCT with decreasing kVp. Similarly, qualitative analysis of MIPs showed improved visualization of beads with decreasing kVp. These findings demonstrate the clinical value of 80 kVp and 100 kVp protocols in the imaging of radiopaque embolizations compared with 120 kVp. However, considerations on X-ray penetration and dose may favor use of 100 kVp imaging over 80 kVp. [ABSTRACT FROM AUTHOR]

The purpose of this study was to evaluate LC Bead LUMI™ (40–90 µm and 70–150 µm) in order to determine if their increased resistance to compression influences microsphere penetration and distribution compared to more compressible commercial microspheres. LC Bead LUMI™ 40–90 µm and 70–150 µm, LC Bead M1 ® 70–150 µm, Embozene™ 40 µm and Embozene™ 100 µm size and distributions were measured using optical microscopy. Penetration in vitro was evaluated using an established ‘plate model’, consisting of a calibrated tapered gap between a glass plate and plastic housing to allow visual observation of microsphere penetration depth. Behaviour in vivo was assessed using a rabbit renal embolization model with histopathologic confirmation of vessel penetration depth. Penetration behaviour in vitro was reproducible and commensurate with the measured microsphere size, the smaller the microsphere the deeper the penetration. Comparison of the microsphere diameter measured on the 2D plate model versus the corresponding average microsphere size measured by histopathology in the kidney showed no significant differences ( p = > 0.05 Mann-Whitney, demonstrating good in vitro - in vivo predictive capabilities of the plate model) confirming predictable performance for LC Bead LUMI™ (40–90 µm and 70–150 µm) based on microsphere size, their increased rigidity having no bearing on their depth of penetration and distribution. An assessment of a LC Bead LUMI™ (40–90 µm and 70–150 µm) has shown that despite having greater resistance to compression, these microspheres behave in a predictable manner within in vitro and in vivo models comparable with more compressible microspheres of similar sizes. [ABSTRACT FROM AUTHOR]

Hydrogel microspheres with the capability to interact with charged species such as various drugs by ion-exchange processes are useful in a variety of biomedical applications. Such systems have been developed to allow active loading of the microsphere with chemotherapeutic agents in the hospital pharmacy for subsequent locoregional therapy of tumours in the liver by drug-eluting bead chemoembolization (DEB-TACE). A variety of microspherical embolisation systems have been described, all based upon hydrogels bearing anionic functionalities to allow interaction with cationically charged drugs. We have recently prepared a series of microspheres bearing cationic functionality and have observed some unusual behaviour induced by phase-separation that occurs during the synthesis of the microspheres. The phase-separation results in the core of the microsphere being enriched in cationic polymer component compared to the outer polyvinyl alcohol (PVA)-based phase. For certain formulations, subsequent swelling in water results in the PVA-rich skins separating from the charged cores. Ion-exchange interactions with model compounds bearing multi-anionic groups create differential contraction of the charged core relative to the skin, resulting in an unusual “golf-ball” appearance to the surface of the microspheres. Statement of Significance The authors believe that the unusual behaviour of the microspheres reported in this paper is the first observation of its kind resulting from phase-separation during synthesis. This could have novel applications in drug delivery for systems that can respond by shedding their skin or altering the surface area to volume ratio upon loading a drug. [ABSTRACT FROM AUTHOR]

Purpose: To evaluate the effect of embolic diameter on achievement of hypoxia after embolization in an animal model of liver tumors.Materials and Methods: Inoculation of VX2 tumors in the left liver lobe was performed successfully in 12 New Zealand white rabbits weighing 3.7 kg ± 0.5 (mean ± SD). Tumors were deemed eligible for oxygen measurements when the maximum transverse diameter measured 15 mm or more by ultrasound examination. Direct monitoring of oxygenation of implanted rabbit hepatic VX2 tumors was performed with a fiberoptic electrode during and after transarterial embolization of the proper hepatic artery to angiographic flow stasis with microspheres measuring 70-150 μm, 100-300 μm, or 300-500 μm in diameter.Results: Failure to achieve tumor hypoxia as defined despite angiographic flow stasis was observed in 10 of 11 animals. Embolization microsphere size effect failed to demonstrate a significant trend on hypoxia outcome among the diameters tested, and pair-wise comparisons of different embolic diameter treatment groups showed no difference in hypoxia outcome. All microsphere diameters tested resulted in similar absolute reduction (24.3 mm Hg ± 18.3, 29.1 mm Hg ± 1.8, and 19.9 mm Hg ± 9.3, P = .66) and percentage decrease in oxygen (56.0 mm Hg ± 23.9, 56.0 mm Hg ± 6.4, and 35.8 mm Hg ± 20.6, P = .65). Pair-wise comparisons for percent tumor area occupied by embolic agents showed a significantly reduced fraction for 300-500 μm diameters compared with 70-150 μm diameters (P < .05).Conclusions: In the rabbit VX2 liver tumor model, three tested microsphere diameters failed to cause tumor hypoxia as measured by a fiberoptic probe sensor according to the adopted hypoxia definitions. [ABSTRACT FROM AUTHOR]

Purpose: To develop and characterize radiopaque embolization microspheres capable of in vivo detection with intraprocedural fluoroscopy and computed tomography (CT) imaging and to evaluate their spatial distribution inside target tissues during and after transcatheter embolization. Materials and Methods: Polyvinyl alcohol hydrogel microspheres were loaded with Lipiodol and examined for iodine content, stability of loading, and conspicuity with fluoroscopy and CT in vitro. Transcatheter embolization of swine liver and kidney was performed with the radiopaque microspheres and spatial distribution was evaluated with intraprocedural fluoroscopy and CT. Ex vivo evaluation was performed with light microscopy and micro-CT. Results: In vitro analyses demonstrated that radiopaque microspheres could be loaded with sufficient iodine content to be detected with routine fluoroscopy and CT imaging and that such loading was relatively stable. Radiopaque microspheres were visible in vivo with fluoroscopy and CT during transcatheter embolization. CT imaging during embolization procedures demonstrated a dose-dependent relationship in the number and size of visualized embolized arteries. Imaging features of radiopaque microsphere distribution inside target tissues correlated well with ex vivo light microscopic and micro-CT evaluation of microsphere distribution. Conclusions: Radiopaque embolization microspheres are visualized during transcatheter embolization with routine intraprocedural fluoroscopy and CT. These radiopaque microspheres provided the three-dimensional spatial distribution of embolic material inside target organs during the procedure, and therefore can provide real-time intraprocedural feedback for the interventional radiologist. These microspheres may be useful for demonstrating the influence of material and technical variability in transcatheter embolization in addition to providing intraprocedural identification of tissue at risk of undertreatment. [Copyright &y& Elsevier]

Purpose: To evaluate the local tissue concentrations of the antineoplastic agent doxorubicin and the amount of drug still present inside drug delivery embolization beads at different time points after embolization and to compare doxorubicin levels with histologic modifications around the beads in a pig liver model. It was hypothesized that doxorubicin-eluting beads maintain cytotoxic concentrations of drug locally over a period of several weeks, as suggested by in vitro elution tests. Materials and Methods: Left lobe hepatic artery embolization was performed in 10 pigs with 100–300-μm or 700–900-μm beads loaded with 37.5 mg doxorubicin/mL. Control unloaded 100–300-μm beads were injected in five pigs. Livers were sampled 28 days or 90 days after embolization. The amount of drug retained inside the beads was assessed with infrared microspectroscopy. Doxorubicin concentration and distribution in the tissue around the beads were determined with microspectrofluorimetry and compared with tissue modifications on hematein eosin saffron–stained sections. Results: Doxorubicin-eluting beads eluted 43% of their initial drug load after 28 days and 89% after 90 days. Doxorubicin was present in tissues around the beads at both time points, with a significant decrease over time (P = .0004). The drug was detected at distances as far as 600 μm from the bead edge. Doxorubicin tissue concentrations ranged from 0.55 M to 6.80 M, which are cytotoxic levels in hepatocyte cell cultures. High concentrations of drug were associated with coagulative necrosis of liver parenchyma. Doxorubicin-eluting beads 100–300 μm in size induced more necrosis than 700–900-μm beads (P = .0036). Conclusions: Doxorubicin-eluting beads deliver high concentrations of the drug over a period of at least 3 months at several hundred micrometers from the bead, leading to significant cytotoxic effects. [Copyright &y& Elsevier]

Purpose: To compare standard embolization microspheres (SMS) with microspheres of very narrow size distribution in terms of physical properties and relative distribution within sheep kidney and uterine artery models of embolization. Materials and Methods: Standard microspheres (SMS; 500–700 μm and 700–900 μm) were compared with narrow microspheres (NMS) of the same material made with a microfluidic method that produced a much narrower size distribution (600 μm and 800 μm). Characterization of both microspheres was performed in vitro (ie, bead size, water content, and compressive modulus). In the sheep model of kidney and uterus embolization, histopathologic analysis was performed to determine the average vessel size occluded, the number of microspheres per vessel, and the deformation in vivo, with a focus on the localization of the products within the different vascular zones of the organ tissues. Results: In vitro testing showed the physical properties of NMS to be similar to those of SMS. SMS and NMS also possessed the same degree of deformation in vivo. In both embolization models, there were no major differences in the localization of SMS compared with NMS of equivalent mean bead diameters. Conclusions: Compared with SMS with a normal distribution in size range, NMS with a narrow size distribution did not exhibit a very different distribution within the vasculature of the sheep kidney or uterus. [Copyright &y& Elsevier]

PURPOSE: To present the pathologic and pharmacokinetic findings from hepatic embolization in a porcine model comparing doxorubicin-eluting beads with bland embolization and to correlate these findings with in vitro release kinetics. MATERIALS AND METHODS: Drug-eluting beads (DEB; 100–300 μm and 700–900 μm) loaded with 37.5 mg doxorubicin per milliliter hydrated beads were used to embolize the hepatic artery feeding the left lobe of the liver in young adult Yucatan pigs (n = 5 per group). Control animals underwent embolization with bland beads (100–300 m; n = 5). Systemic plasma levels of doxorubicin were measured and correlated to in vitro drug release. Blood sampling and histopathologic examination were performed during the 90-day follow-up. RESULTS: All animals underwent successful embolization, and the treatment was well tolerated. Mean volumes of beads administered were 2.0–3.4 mL, with mean doses of 127.5 mg and 78.7 mg of doxorubicin for the 100- to 300-μm and 700- to 900-μm DEB groups, respectively. Gross pathologic examination revealed no effects on organs other than the liver. There was a transient increase in liver enzyme levels, particularly in the groups of animals who underwent embolization with 100- to 300-μm DEB. Histopathologic study showed mostly nonnecrotic changes with bland beads, whereas the effects of DEB were more severe, with large areas of pannecrosis evident with the 100- to 300-μm DEB. Maximum plasma concentrations were 651 ng/mL and 42.8 ng/mL for the 100- to 300-μm and 700- to 900-μm DEB groups, respectively, observed at 1 minute for both groups. Correlation with in vitro data showed a strong linear relationship. CONCLUSIONS: Hepatic arterial embolization with DEB was shown to be safe and well tolerated. The locoregional delivery of doxorubicin from DEB caused targeted tissue damage with minimal systemic impact and could be a promising new approach to transarterial chemoembolization of solid tumors. [Copyright &y& Elsevier]

PURPOSE: The purpose of this investigation is to present the in vitro characterization and detailed drug-loading procedure for DC Bead, a microsphere product that can be loaded with chemotherapeutic agents for embolization. MATERIALS AND METHODS: DC Bead is an embolic microsphere product that is capable of being loaded with anthracycline drugs such as doxorubicin just before administration in a transarterial chemoembolization (TACE) procedure. Beads can be loaded from solutions prepared from doxorubicin powder or the doxorubicin HCl formulation. In this evaluation, bead sizes were measured by optical microscopy with video imaging. Gravimetric analysis demonstrated the effect of drug loading on bead water content, and its consequent impact on bead compressibility was determined. The subsequent deliverability of the beads was assessed by mixing the beads with contrast medium and saline solution and passing the beads through an appropriately sized microcatheter. A T-cell apparatus was used to monitor the in vitro elution of the drug from the beads over a period of 24 hours in various elution media. RESULTS: DC Bead spheres could be easily loaded with doxorubicin to a recommended level of 25 mg/mL of hydrated beads by immersion of the beads in the drug solution for 10–120 minutes depending on microsphere size. Other commercial embolic microspheres were shown not to load doxorubicin to the same extent or release it in the same fashion and were considered unsuitable for local drug delivery. Maximum theoretic capacity for DC Bead was approximately 45 mg/mL. Increase in doxorubicin loading resulted in a concomitant decrease in water content and consequential increase in bead resistance to compression force. Drug loading also resulted in a decrease in the average size of the beads, which was dependent on bead size and drug dose. This did not impact bead delivery at any drug loading level to a maximum of 37.5 mg/mL. Beads 100–700 μm in size could be delivered through 2.7-F microcatheters, whereas the 700–900-μm range required 3-F catheters. Modeling of the kinetics of drug elution from the beads in vitro at a loading dose of 25 mg/mL yielded calculated half-lives of 150 hours for the 100–300-μm range to a maximum of 1,730 hours for the 700–900-μm size range, which was dependent on the ionic strength of the elution medium. For comparison, there was a rapid loss of drug from an unstable Lipiodol emulsion with a half-life of approximately 1 hour. CONCLUSIONS: DC Bead can be loaded with doxorubicin to provide an accurate dosage of drug per unit volume of beads. Drug elution is dependent on ion exchange with the surrounding environment and is controlled and sustained, unlike the rapid separation of the drug from Lipiodol. Drug loading has no impact on the handling and deliverability of the beads, making them suitable for superselective TACE. [Copyright &y& Elsevier]

Describes in detail the evaluation of a phosphorylcholine-based stent coating, in vitro, through preclinical and early clinical data. Features of the BiodivYsio coronary stent family; Discussion on early mobilization after protamine reversal of heparin; Conclusion.

Purpose: To investigate material density, flow, and viscosity effects on microsphere distribution within an in vitro model designed to simulate hepatic arteries.Materials and Methods: A vascular flow model was used to compare distribution of glass and resin surrogates in a clinically derived flow range (60-120 mL/min). Blood-mimicking fluid (BMF) composed of glycerol and water (20%-50% vol/vol) was used to simulate a range of blood viscosities. Microsphere distribution was quantified gravimetrically, and injectate solution was dyed to enable quantification by UV spectrophotometry. Microsphere injection rate (5-30 mL/min) and the influence of contrast agent dilution of injection solution (0%-60% vol/vol) were also investigated.Results: No significant differences in behavior were observed between the glass and resin surrogate materials under any tested flow conditions (P = .182; n = 144 injections). Microspheres tend to align more consistently with the saline injection solution (r2 = 0.5712; n = 144) compared with total BMF flow distribution (r2 = 0.0104; n = 144). The most predictable injectate distribution (ie, greatest alignment with BMF flow, < 5% variation) was demonstrated with > 10-mL/min injection rates of pure saline solution, although < 20% variation with glass microsphere distribution was observed with injection solution containing as much as 30% contrast medium when injected at > 20 mL/min.Conclusions: Glass and resin yttrium-90 surrogates demonstrated similar distribution in a range of clinically relevant flow conditions, suggesting that microsphere density does not have a significant influence on microsphere distribution. Injection parameters that enhanced the mixing of the spheres with the BMF resulted in the most predictable distribution. [ABSTRACT FROM AUTHOR]

Purpose: To quantify changes in tumor microvascular (< 1 mm) perfusion relative to commonly used angiographic endpoints.Materials and Methods: Rabbit Vx2 liver tumors were embolized with 100-300-μm LC Bead particles to endpoints of substasis or complete stasis (controls were not embolized). Microvascular perfusion was evaluated by delivering two different fluorophore-conjugated perfusion markers (ie, lectins) through the catheter before embolization and 5 min after reaching the desired angiographic endpoint. Tumor microvasculature was labeled with an anti-CD31 antibody and analyzed with fluorescence microscopy for perfusion marker overlap/mismatch. Data were analyzed by analysis of variance and post hoc test (n = 3-5 per group; 18 total).Results: Mean microvascular density was 70 vessels/mm(2) ± 17 (standard error of the mean), and 81% ± 1 of microvasculature (ie, CD31(+) structures) was functionally perfused within viable Vx2 tumor regions. Embolization to the extent of substasis eliminated perfusion in 37% ± 9 of perfused microvessels (P > .05 vs baseline), whereas embolization to the extent of angiographic stasis eliminated perfusion in 56% ± 8 of perfused microvessels. Persistent microvascular perfusion following embolization was predominantly found in the tumor periphery, adjacent to normal tissue. Newly perfused microvasculature was evident following embolization to substasis but not when embolization was performed to complete angiographic stasis.Conclusions: Nearly half of tumor microvasculature remained patent despite embolization to complete angiographic stasis. The observed preservation of tumor microvasculature perfusion with angiographic endpoints of substasis and stasis may have implications for tumor response to embolotherapy. [ABSTRACT FROM AUTHOR]

Purpose: To develop a simple method to produce radiopaque drug-eluting microspheres (drug-eluting beads [DEBs]) that could be incorporated into the current clinical transcatheter arterial chemoembolization workflow and evaluate their performance in vitro and in vivo.Materials and Methods: An ethiodized oil (Lipiodol; Guerbet, Villepinte, France) and ethanol solution was added to a lyophilized 100-300 µm bead before loading with doxorubicin. These radiopaque drug-eluting beads (DEBs; Biocompatibles UK Ltd, Farnham, United Kingdom) were evaluated in vitro for x-ray attenuation, composition, size, drug loading and elution, and correlation between attenuation and doxorubicin concentration. In vivo conspicuity was evaluated in a VX2 tumor model.Results: Lipiodol was loaded into lyophilized beads using two glass syringes and a three-way stopcock. Maximum bead attenuation was achieved within 30 minutes. X-ray attenuation of radiopaque beads increased linearly (21-867 HU) with the amount of beads (0.4-12.5 vol%; R(2) = 0.9989). Doxorubicin loading efficiency and total amount eluted were similar to DC Bead (Biocompatibles UK Ltd); however, the elution rate was slower for radiopaque DEBs (P < .05). Doxorubicin concentration linearly correlated with x-ray attenuation of radiopaque DEBs (R(2) = 0. 99). Radiopaque DEBs were seen in tumor feeding arteries after administration by fluoroscopy, computed tomography, and micro-computed tomography, and their location was confirmed by histology.Conclusions: A simple, rapid method to produce radiopaque DEBs was developed. These radiopaque DEBs provided sufficient conspicuity to be visualized with x-ray imaging techniques. [ABSTRACT FROM AUTHOR]

Abstract: Purpose: To determine local doxorubicin levels surrounding radiopaque drug-eluting beads (DEBs) in normal swine liver and kidney following transcatheter arterial chemoembolization. The influence of bead size (70–150 μm or 100–300 μm) was compared with regard to tissue penetration and spatial distribution of the bead, as well as eventual drug coverage (ie, amount of tissue exposed to drug). Materials and Methods: Radiopaque DEBs were synthesized by suspension polymerization followed by incorporation of iodized oil and doxorubicin. Chemoembolization of swine liver and kidney was performed under fluoroscopic guidance. Three-dimensional tissue penetration of “imageable” DEBs was investigated ex vivo with micro–computed tomography (microCT). Drug penetration from the bead surface and drug coverage was evaluated with epifluorescence microscopy, and cellular localization of doxorubicin was evaluated with confocal microscopy. Necrosis was evaluated with hematoxylin and eosin staining. Results: MicroCT demonstrated that 70–150-μm DEBs were present in more distal arteries and located in a more frequent and homogeneous spatial distribution. Tissue penetration of doxorubicin from the bead appeared similar (∼300 μm) for both DEBs, with a maximum tissue drug concentration at 1 hour coinciding with nuclear localization of doxorubicin. The greater spatial frequency of the 70–150-μm DEBs resulted in approximately twofold improved drug coverage in kidney. Cellular death is predominantly observed around the DEBs beginning at 8 hours, but increased at 24 and 168 hours. Conclusions: Smaller DEBs penetrated further into targeted tissue (ie, macroscopic) with a higher spatial density, resulting in greater and more uniform drug coverage (ie, microscopic) in swine. [Copyright &y& Elsevier]