Search

A U-Pu co-crystallization reprocessing system is proposed for light water reactor fuels and its flowsheet study is carried out. This reprocessing system is based on experimental evidence indicating that Pu(VI) in a nitric acid solution is co-crystallized with uranyl nitrate, whereas it is not crystallized when uranyl nitrate is not present in the solution. The system consists of five steps: dissolution of spent fuel, Pu oxidation, U-Pu co-crystallization, re-dissolution of the crystals, and U re-crystallization. The proposed system does not require the use of organic solvents, resulting in a relative increase in safety and cost-effectiveness. The system requires recycling of the mother liquor from the U-Pu co-crystallization step to recover almost the entire amount of U and Pu at this step. The appropriate recycling ratio is determined, such that satisfactory decontamination is achieved. A consistent ratio of Pu to U in the mother liquor from the U re-crystallization is maintained by regulating the temperature, suggesting that the quality of the liquor, which can be a source of mixed oxide fuels, can be controlled despite differences in the composition of the spent fuel. The size of a plant utilizing the proposed system is estimated to be about 30% less than that of the PUREX system.

Perylenetetracarboxydiimide (PEDI) molecularly dispersed in polyamic acid (PAA) and polyimide (PI) films has unique fluorescence properties. An originally strong fluorescence of PEDI is efficiently quenched in the PAA films. The systematic variation of the chain structure of the PAA matrices revealed that the aromatic amide groups in the PAA chains function as a quencher. When a PAA derived from 3,4,3'4'-biphenyltetracarboxylic dianhydride (BPDA) and p-phenylenediamine (PDA), BPDA/PDA, was used as a matrix polymer, the fluorescence of the dye dispersed in the film increased abruptly as imidization of the matrix proceeds. But annealing at temperatures higher than 320°C in the step-heating process caused a gradual decrease in the fluorescence intensity. The decreased intensity results from the dye–PDA units interactions intensified by the denser molecular packing of the matrix polymer chains. PEDI shows significant dependence of the fluorescence intensity on the chain structure of the PI matrices. In the various PI films containing a fixed diamine component, the dye fluorescence intensity reduces linearly with an increase in the intramolecular charge transfer ability of the PI matrices. From the result, we propose a fluorescence quenching mechanism through multistep electron transfer processes. The BPDA/PDA polyimide matrix leads to a strong PEDI fluorescence whereas the pyromellitic dianhydride (PMDA)-based PI matrices do not. For the blends composed of these PIs, the fluorescence of PEDI bound into the main chains provides a valuable indicator of the miscibility on the molecular level. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 827–840, 1998

Without Abstract:

In the presence of 5–10 mol CpRuClcod, 1,6- and 1,7-diynes were allowed to react with an ethynylboronate at ambient temperature to give rise to bi- and tricyclic arylboronates in 64–93 isolated yields.

ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract, please click on HTML or PDF.

ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract, please click on HTML or PDF.

For Abstract see ChemInform Abstract in Full Text.

For Abstract see ChemInform Abstract in Full Text.

A new CMOS masterslice LSI has been developed. This LSI adopts silicon gate CMOS of 3.6 µm gate length and double layer metal interconnection process. It can take up to 3000 effective gates without any special cooling requirement. The average propagation delay time is 7 ns/gate and the power dissipation of an LSI is 50 mW at 10 MHz operation. By suitable DA support, it becomes possible to develop LSI's in quick turnaround time avoiding design changes or errors.

The application of synthetic aperture ultrasonic imaging technique to nondestructive testing of material is discussed. A prototype synthetic aperture ultrasonic imaging system has been developed to improve the lateral resolution. The diverging beam transducer is moved along the surface and a tomographic image is obtained within one minute. Experiments carried out on steel block specimens verified the capability to reconstruct tomographic images in high lateral resolution.