Search

The formation of galaxies by gradual hierarchical co-assembly of baryons and cold dark matter halos is a fundamental paradigm underpinning modern astrophysics1,2and predicts a strong decline in the number of massive galaxies at early cosmic times3–5. Extremely massive quiescent galaxies (stellar masses of more than 1011M⊙) have now been observed as early as 1–2 billion years after the Big Bang6–13. These galaxies are extremely constraining on theoretical models, as they had formed 300–500 Myr earlier, and only some models can form massive galaxies this early12,14. Here we report on the spectroscopic observations with the JWST of a massive quiescent galaxy ZF-UDS-7329 at redshift 3.205 ± 0.005. It has eluded deep ground-based spectroscopy8, it is significantly redder than is typical and its spectrum reveals features typical of much older stellar populations. Detailed modelling shows that its stellar population formed around 1.5 billion years earlier in time (z≈ 11) at an epoch when dark matter halos of sufficient hosting mass had not yet assembled in the standard scenario4,5. This observation may indicate the presence of undetected populations of early galaxies and the possibility of significant gaps in our understanding of early stellar populations, galaxy formation and the nature of dark matter.

AbstractThis study examines the effectiveness of transactional analysis (TA) as a recovery support for substance users with mild to moderate substance use disorders (SUD). A modified version of a 12-session TA program was implemented for 3 months. There were 25 participants who took part during the sessions. The findings revealed a significant treatment impact in reducing psychological distress and drug craving across all sub-elements, including intensity of craving, frequency of craving, duration of craving, and number of times of craving (p< .05). Over the course of the sessions, the frequency of lapses decreased. The findings indicate that TA is helpful in the recovery of those with SUD, especially by strengthening the Adult ego state and changing the stroking pattern and life position of individuals. Further research directions might include a follow-up study after the program, more attention to stress management, and the role of the Parent ego state. One implication of this study might be that providing a framework for a TA psychotherapy in the treatment interventions for individuals with SUD is useful.

Background: The deep peroneal nerve (DPN) plays a role in afferent nociceptive dorsal midfoot joint pain perception. DPN neurectomy for treatment of symptomatic dorsal midfoot osteoarthritis allows early mobilization and weightbearing. The purpose of our study was to evaluate the patient satisfaction and pain relief after DPN neurectomy for treatment of chronic dorsal midfoot pain due to osteoarthritis.Methods: In this retrospective, IRB-approved, questionnaire-based study, we evaluated 48 patients (55 feet) with an average follow-up of 35.1 (range, 16-51) months who underwent DPN neurectomy at our institution between September 2017 and February 2021. There were 38 women and 10 men, 41 unilateral (22 right, 19 left) and 7 bilateral procedures, with an average age of 67.8 (range, 35-88) years at the time of surgery. A questionnaire that included questions regarding postsurgical dorsal midfoot pain relief, surgical result satisfaction, and current functional limitations was administered via telephone. Demographic information, patient responses, and complications were recorded.Results: Of the 48 patients, 80.8% were satisfied with the result of the surgery in relieving their dorsal midfoot pain, 84.6% would repeat the surgery under the same circumstances, 83.8% would recommend the surgery to a friend, 10.4% reported they wish they had undergone arthrodesis, 91.7% reported pain relief in the first 6 months, and 55.6% reported current activity limitations. Six feet (10.9%) underwent a second procedure with an average postoperative time of 20.5 (range, 1-36) months. Complications included 1 hematoma and deep wound infection, 1 DPN neuroma and superficial peroneal nerve entrapment, and 4 patients with inadequate pain relief.Conclusion: In this cohort, DPN neurectomy appeared to be a reasonable surgical alternative to arthrodesis for the management of chronic dorsal midfoot pain due to midfoot osteoarthritis after failed nonoperative management.Level of Evidence: Level IV, retrospective case series.

The proliferation of personal artificial intelligence (AI) -assistant technologies with speech-based conversational AI interfaces is driving the exponential growth in the consumer Internet of Things (IoT) market. As these technologies are being applied to keyword spotting (KWS), automatic speech recognition (ASR), natural language processing (NLP), and text-to-speech (TTS) applications, it is of paramount importance that they provide uncompromising performance for context learning in long sequences, which is a key benefit of the attention mechanism, and that they work seamlessly in polyphonic environments. In this work, we present a 25-mm2 system-on-chip (SoC) in 16-nm FinFET technology, codenamed SM6, which executes end-to-end speech-enhancing attention-based ASR and NLP workloads. The SoC includes: 1) FlexASR, a highly reconfigurable NLP inference processor optimized for whole-model acceleration of bidirectional attention-based sequence-to-sequence (seq2seq) deep neural networks (DNNs); 2) a Markov random field source separation engine (MSSE), a probabilistic graphical model accelerator for unsupervised inference via Gibbs sampling, used for sound source separation; 3) a dual-core Arm Cortex A53 CPU cluster, which provides on-demand single Instruction/multiple data (SIMD) fast fourier transform (FFT) processing and performs various application logic (e.g., expectation–maximization (EM) algorithm and 8-bit floating-point (FP8) quantization); and 4) an always-ON M0 subsystem for audio detection and power management. Measurement results demonstrate the efficiency ranges of 2.6–7.8 TFLOPs/W and 4.33–17.6 Gsamples/s/W for FlexASR and MSSE, respectively; MSSE denoising performance allowing 6 $\times $ smaller ASR model to be stored on-chip with negligible accuracy loss; and 2.24-mJ energy consumption while achieving real-time throughput, end-to-end, and per-frame ASR latencies of 18 ms.

Background: Stress-view radiographs are frequently obtained to evaluate supination-external rotation (SER) variant ankle fractures. Measurement of the ankle medial clear space (MCS) is a surrogate of medial structure integrity as part of overall ankle stability. Measurement of the lateral talus displacement with respect to the incisura may be a sensitive and specific method to assess joint subluxation.Methods: Retrospective review of acute SER-variant isolated lateral malleolar fractures with gravity stress views (GSVs) were performed for 103 patients. GSV analysis was performed with standardized measurements of the MCS, superior clear space (SCS), and 2 new novel measurements of lateral talus subluxation (LTS). Decision for surgery was obtained by surgeons who reviewed masked injury radiographs for predictive performance analysis of the LTS vs MCS.Results: MCS, SCS, and LTS measurements were performed on 103 patients. Mean MCS, SCS, and LTS within the operative group was increased. MCS ≥5 mm and LTS >4 mm had equal sensitivity (95%), with higher specificity for LTS (75% vs 60%). Receiver operating characteristic analysis demonstrates an area under the curve of 0.786 for MCS ≥5 mm vs 0.918 for LTS >4 mm.Conclusion: We found LTS to be superior to MCS for medial ankle structure stability on gravity stress views of SER-variant ankle fractures. We propose this as a useful tool for clinicians to consider when evaluating SER-variant ankle fractures.Level of Evidence: Level II, prospective comparative study of radiographs.

Metal fluorides, promising lithium-ion battery cathode materials, have been classified as conversion materials due to the reconstructive phase transitions widely presumed to occur upon lithiation. We challenge this view by studying FeF3using X-ray total scattering and electron diffraction techniques that measure structure over multiple length scales coupled with density functional theory calculations, and by revisiting prior experimental studies of FeF2and CuF2. Metal fluoride lithiation is instead dominated by diffusion-controlled displacement mechanisms, and a clear topological relationship between the metal fluoride F−sublattices and that of LiF is established. Initial lithiation of FeF3forms FeF2on the particle’s surface, along with a cation-ordered and stacking-disordered phase, A-LixFeyF3, which is structurally related to α-/β-LiMn2+Fe3+F6and which topotactically transforms to B- and then C-LixFeyF3, before forming LiF and Fe. Lithiation of FeF2and CuF2results in a buffer phase between FeF2/CuF2and LiF. The resulting principles will aid future developments of a wider range of isomorphic metal fluorides.

X-ray and ultraviolet photoelectron spectroscopy are performed on transition metal dichalcogenides (TMDs) MoS2, MoSe2, and MoTe2monolayers on Au surfaces, to identify charge transfer processes and changes in structural phase upon annealing up to 500 °C. Although charge transfer does appear to occur as the spacing between the TMD monolayer and the Au surface decreases, we do not find spectroscopic evidence for the 2H to 1T phase change in exfoliated TMDs. However, we find the defect density of the TMDs influences the evolution of the X-ray photoelectron spectra during thermal treatment on Au. Both metal–organic chemical vapor deposition grown and helium-ion irradiated exfoliated-TMDs annealed on Au surfaces show shifts in their spectra that could be interpreted as a phase change, but are the result of TMD/Au hybridization, grain boundaries and defects interacting with the Au surface.

We studied the elastic profile of monocytic THP-1 leukemia cells using a microfluidic-assisted optical trap. A 2-µm fused silica bead was optically trapped to mechanically dent an immobilized single THP-1 monocyte sieved on a 15-µm microfluidic capture chamber. Cells treated with Zeocin and untreated cells underwent RT-qPCR analysis to determine cell apoptosis through gene expression in relation to each cell’s deformation profile. Results showed that untreated cells with 43.05 ± 6.68 Pa are more elastic compared to the treated cells with 15.81 ± 2.94 Pa. THP-1 monocyte’s elastic modulus is indicative of cell apoptosis shown by upregulated genes after Zeocin treatment. This study clearly showed that the developed technique can be used to distinguish between cells undergoing apoptosis and cells not undergoing apoptosis and which may apply to the study of other cells and other cell states as well.

Side reactions involving surface reduction play a critical role in the failure of LiNi0.8Co0.15Al0.05O2to reach its theoretical capacity as a cathode material for Li-ion batteries. While macroscopic consequences are known, the underlying nanoscopic mechanisms are not fully elucidated. By coupling X-ray spectroscopy with several X-ray microscopy modalities, we have spatially resolved the extent of Ni oxidation at several states of charge and uncovered heterogeneity that is hidden when considering ensemble measurements alone. The use of morphologically controlled particles enabled high-resolution imaging of these materials, uncovering gradients of Ni oxidation states within individual primary particles. At high states of charge, these gradients revealed regions of possible oxygen deficiency extending deeper into the particle than previously observed. Surface-sensitive X-ray coupled scanning tunneling microscopy allows oxidation states to be measured at the material’s surface, showing predominantly NiIIin the first atomic layer and mixtures of NiIIwith NiIII/NiIValready appearing 1.5 nm into the particle. These results reveal the subtle interplay between irreversible surface transformations and the bulk reactions that ultimately define function, which will refine strategies of surface passivation that are key to overcoming current performance limitations.

We report room-temperature negative magnetoresistance in ferromagnet–graphene–ferromagnet (FM|Gr|FM) junctions with minority spin polarization exceeding 80%, consistent with predictions of strong minority spin filtering. We fabricated arrays of such junctions viachemical vapor deposition of multilayer graphene on lattice-matched single-crystal NiFe(111) films and standard photolithographic patterning and etching techniques. The junctions exhibit metallic transport behavior, low resistance, and the negative magnetoresistance characteristic of a minority spin filter interface throughout the temperature range 10 to 300 K. We develop a device model to incorporate the predicted spin filtering by explicitly treating a metallic minority spin channel with spin current conversion and a tunnel barrier majority spin channel and extract spin polarization of at least 80% in the graphene layer in our structures. The junctions also show antiferromagnetic coupling, consistent with several recent predictions. The methods and findings are relevant to fast-readout low-power magnetic random access memory technology, spin logic devices, and low-power magnetic field sensors.

Background: Dorsal pain from osteoarthritic midfoot joints is thought to be relayed by branches of the medial and lateral plantar, sural, saphenous, and deep peroneal nerves (DPN). However, there is no consensus on the actual number or pathways of the nervous branches for midfoot joint capsular innervation. This study examined the DPN’s terminal branches at the midfoot joint capsules through anatomic dissection and confirmation of their significance in a clinical case series of patients with midfoot pain relief after DPN block.Methods: Eleven cadaveric lower leg specimens, 6 left and 5 right, were dissected using operative loupe magnification. We preserved the terminal branches and recorded their paths and branching patterns. Joint capsular innervations were individually noted. To confirm our hypothesis of significant dorsal midfoot joint capsular innervation by the DPN, we also performed an institutional review board–approved retrospective chart review of 37 patients with painful dorsal midfoot osteoarthritis who underwent diagnostic local anesthetic injection block of the DPN. The percentage of temporary pain relief after the injection was recorded.Results: Terminal innervation of the DPN branches showed distribution of the second and third tarsometatarsal joints in all specimens. Inconsistent innervation of the naviculocuneiform (9/11), fourth (7/11), first (6/11), and fifth (4/11) tarsometatarsal and calcaneocuboid joints (1/11) were observed. The retrospective review of pain relief in patients with dorsal midfoot pain due to arthritis after diagnostic injection demonstrated a mean of 92.1% improvement.Conclusion: Innervation of the dorsal midfoot joint capsule appears to follow a consistent distribution across 3 joints: second and third tarsometatarsal joints and the naviculocuneiform joint. Acute relief of dorsal midfoot arthritic pain after diagnostic injection suggests that dorsal midfoot nociceptive pain is at least partly transmitted by the DPN.Level of Evidence: Level IV, case series.

When an ultrashort laser pulse is tightly focused to a size approaching its central wavelength, the properties of the focused spot diverge from the diffraction-limited case. Here, we report on this change in behavior of a tightly focused petawatt-class laser beam by an f/1 off-axis parabolic mirror (OAPM). Considering the effects of residual aberration, the spatial profile of the near-field, and pointing error, we estimate the deviation in peak intensities of the focused spot from the ideal case. We verify that the estimated peak intensity values are within an acceptable error range of the measured values. With the added uncertainties in target alignment, we extend the estimation to infer on-target peak intensities of ≥10^22  W/cm^2 for a target at the focal plane of this f/1 OAPM.

Resonant inelastic X-ray scattering (RIXS) at the O K-edge is considered a prime technique to identify bulk oxidized oxygen formation, but its fundamental interpretation is not straightforward. In this study, we intentionally induce RIXS signatures of oxidized oxygen upon beam exposure in LiAlO2polymorphs that are easily distinguished because of their wide band gaps. After careful consideration of beam exposure effects on Li[Li0.144Ni0.136Mn0.544Co0.136]O2(LR-NMC), we conclude that oxidized oxygen features are inherent at high states of charge and are lost upon aggressive beam exposure. The extracted oxidized oxygen line shapes from our X-ray irradiation studies for both LiAlO2(induced) and LR-NMC (inherent) are found to have an additional oxidized oxygen RIXS feature not observed in O2gas studies. This study highlights the unique insight of O K-edge RIXS into determining the nature and stability of oxidized oxygen states.

Monolayers of transition-metal dichalcogenides (TMDs) are promising components for flexible optoelectronic devices because of their direct band gap and atomically thin nature. The photoluminescence (PL) from these materials is often strongly suppressed by nonradiative recombination mediated by midgap defect states. Here, we demonstrate up to a 200-fold increase in PL intensity from monolayer MoS2synthesized by chemical vapor deposition (CVD) by controlled exposure to laser light in the ambient. This spatially resolved passivation treatment is stable in air and vacuum. Regions unexposed to laser light remain dark in fluorescence despite continuous impingement of ambient gas molecules. A wavelength-dependent study confirms that PL brightening is concomitant with exciton generation in the MoS2; laser light below the optical band gap fails to produce any enhancement in the PL. We highlight the photosensitive nature of the process by successfully brightening with a low-power broadband white light source. We decouple changes in absorption from defect passivation by examining the degree of circularly polarized PL. This measurement, which is independent of exciton generation, confirms that laser brightening reduces the rate of nonradiative recombination in the MoS2. A series of gas exposure studies demonstrate a clear correlation between PL brightening and the presence of water. We propose that H2O molecules passivate sulfur vacancies in the CVD-grown MoS2but require photogenerated excitons to overcome a large adsorption barrier. This work represents an important step in understanding the passivation of CVD-synthesized TMDs and demonstrates the interplay between adsorption and exciton generation.

Oxygen participation, arising from increased transition metal–oxygen covalency during delithiation, is considered essential for the description of charge compensation in conventional layered oxides. The advent of high-resolution mapping of the O K-edge resonant inelastic X-ray scattering (RIXS) provides an opportunity to revisit the onset and extent of oxygen participation. Combining RIXS with an array of structural and electronic probes for the family of Ni-rich LiNi0.8Co0.2−yAlyO2cathodes, we identify common charge compensation regimes that are assigned to formal transition metal redox (<4.25 V) and oxygen participation through covalency (>4.25 V). From O K-edge RIXS maps, we find the emergence of a sharp RIXS feature in these systems when approaching full delithiation, which has previously been associated with lattice oxidized oxygen in alkali-rich systems. The lack of transition metal redox signatures and strong covalency at these high degrees of delithiation suggest this RIXS feature is similarly attributed to lattice oxygen charge compensation as in the alkali-rich systems. The RIXS feature's evolution with state of charge in conventional layered oxides is evidence that this feature reflects the depopulation of occupied O 2p states associated with oxygen participation.

This paper reports new insights into structural and chemical evolution of surface phases of LiNi0.8Co0.15Al0.05O2(NCA) held at constant high voltages (up to 4.75 V) as well as high temperatures (60 °C) by correlating crystal structure using high angle annular dark field scanning transmission electron microscopy (HAADF-STEM) imaging with chemistry using electron energy loss spectroscopy (EELS). We also followed the Al distribution within individual NCA particles by X-ray energy dispersive spectroscopy (EDS). The progression of these phases as a function of distance from the edge shows simultaneous evolution of crystal structures and chemistry from rocksalt to layered, forming a complete solid solution. We have also observed an extended disordered phase with rocksalt (Fm3̅m) symmetry in which quantitative electron energy loss spectroscopy reveals it to be an oxygen deficient cation disordered phase with chemical characteristics, as determined by EELS, similar to spinel. The formation of these disordered phases with cation and oxygen vacancies has been driven by surface oxygen loss caused by reactions with the electrolyte followed by cation migration from the octahedral 3a M (M = Ni, Co, Al) layer to the octahedral 3b Li layer. These surface rocksalt phases are not fully dense as they contain Al and Li as well as a high concentration of cation and oxygen vacancies. After discharge, Li is detected within these phases indicative that Li transport has occurred through these rocksalt phases. At 60 °C and 4.75 V a very large impedance rise is observed leading to complete cell irreversibility which is caused by significant metal dissolution from the cathode and formation of surface porosity. In the near surface region of some particles, a phase transformation from R3̅m (O3) to P3̅m1 (O1) is also observed which has become thermodynamically stable from complete delithiation as well as from local Al surface depletion.

Practical utilization of energy densities near the theoretical limit for R3̅mlayered oxide positive electrode materials is dependent on the stability of the electrochemical performance of these materials at or near full delithiation. To develop new chemistries and novel approaches toward the improvement of the electrochemical performance of these materials at such high states of charge, a robust understanding of the failure mechanisms limiting current materials is necessary. Thorough analysis of LixCo1–yAlyO2and LixNi1–yAlyO2as well as LixNi0.8Co0.2O2and LixNi0.8Co0.15Al0.05O2(1 ≥ x≥ 0 and 0.2 ≥ y≥ 0) enabled the identification of key relationships between the transition metal chemistry of the electrode, its structural stability, and cycling characteristics at or near complete delithiation (4.75 V). Extensive characterization of these materials was achieved by a multitude of physical and electrochemical techniques to investigate the relative importance of surface vs bulk phenomena. The resulting insights derived from these analyses highlight the importance of the intrinsic structural and mechanical stability of the electrode when highly delithiated and establish guidelines for identifying positive electrode materials with improved high state of charge performance. Particularly important is the contrasting electrochemical impact of Al substitution into LiCoO2- and LiNiO2-based materials, which is shown to likely arise from the enhanced propensity for Al ions to migrate to the tetrahedral site in Co-rich compounds at high states of delithiation.

The field of microbial biotechnology has revolutionized the utilization of microorganisms to overcome the problems of environmental pollutions. The present study aimed to identify silver-tolerant isolates and screen their ability to synthesize silver nanoparticles for possible use as bioremediation agents. Seventeen bacterial isolates from soil collected from the Smokey Mountain landfill in Manila, Philippines, were found to tolerate 0.01 M AgNO3in the culture medium. Molecular and phylogenetic analyses using the 16S rRNA gene sequence identified the isolates as Bacillus cereus, Bacillus subtilis, Bacillus flexus, Bacillus thuringiensis, Alcaligenes faecalis, Achromobactersp. and Ochrobactrumsp. The formation of silver nanoparticles was evident in the change in color of the reaction mixtures, and was detected through UV-VIS spectroscopy with absorbance peaks at 250-300 nm and 400-450 nm. Scanning electron microscopy revealed the aggregation of diverse shapes of silver nanoparticles with sizes ranging from 70 to 200 nm. The best silver nanoparticle-synthesizing isolates were Alcaligenes faecalisand Bacillus cereus. The results denote the promising microbial technology application of the 17 silver-tolerant isolates in combating the adverse effects of metals and other pollutants in the environment.