Search

The problem of the dynamic behavior of masonry arches and vaults has gained increasing interest in recent years, since the key role of these structural elements in the masonry constructions, especially of historic interest. Despite this, the literature still lacks a sufficiently large number of contributions on this important subject, and this deficiency is even more marked for the case of reinforced masonry. In this context, the present paper shows and discusses some preliminary experimental results on full-scale dynamic tests on unreinforced and GFRCM-reinforced Apulian tuff masonry arches. The experiments have been performed by using a test bench appositely designed and built; the dynamic excitation consisted of a harmonic base motion with fixed amplitude and increasing frequency. The acceleration in suitable points of the arches, the base shear and the base motion have been continuously monitored during the tests.

This work focuses on an experimental and numerical study of a tuff barrel vault first damaged by differential vertical settlements of the abutments without rotations, then reinforced with a FRCM system composed by a fiber-reinforced mortar embedding a basalt fiber net, and finally subjected to a concentrated load on a generatrix (still ongoing). The geometry of the vault (polycentric near parabolic shape) and the masonry material (Apulian tuff) have been chosen in order to be representative of some masonry vaults common in rural constructions of Apulia region; also, a load representative of the infill weight has been applied during all the experimental tests. In parallel to the experiments, numerical simulations by a heterogeneous FE Abaqus model calibrated on the experimentally determined mechanical properties of materials have been performed. This model aims at reproducing the settlement phase and to accurately predict the load bearing capacity of the reinforced structure. To this aim, Concrete Damage Plasticity model has been used for modeling mortar joints and cementitious matrix, whereas tuff bricks have been assumed linearly elastic; finally, the basalt fiber net used in the FRCM reinforced has been described by suitable equivalent elasto-damaging trusses.

We study the implementation of Stable Unbonded Fiber-Reinforced Elastomeric Isolators (SU-FREI) for the seismic protection of a typical historical masonry construction from Puglia. The effectiveness of this innovative isolation technique is analyzed by means of a non-linear dynamic analysis, which shows substantial improvements of the seismic response with respect to the corresponding fixed base construction.

We characterize the elastic response of Apricena marble by using advanced ultrasonic nondestructive techniques. An innovative experimental device for ultrasonic immersion tests is employed for the determination of ultrasonic velocities of waves travelling into the sample for any angle of propagation. The interpretation of the experimental results within the theoretical framework of wave propagation in elastic materials allows for both the classification of the anisotropy and the determination of the elastic moduli.

When stress in concrete exceeds certain threshold value, microcracks are nucleated, these microcracks can propagate and coalesce forming macrocracks, resulting in the gradual decay of the mechanical properties of concrete and eventual failure of the concrete structures. For safety concerns, one needs to develop suitable nondestructive testing methods capable of detecting past overloads of concrete structures during its service life. In this work, the stress-induced damage in concrete is monitored using ultrasonic techniques, exploiting the coupling between the stress level experienced by concrete and its wave propagation parameters. Cyclic compression tests with increasing maximum load level have been performed on specimens made of concrete with coarse-grained (CG) aggregates. Experimental results have been analyzed by two different ultrasonic methods—the linear and the nonlinear ultrasonic techniques. In linear ultrasonic technique, the stress level experienced by the specimens is related to the variations in signal amplitude and velocity of ultrasonic waves. In nonlinear ultrasonic method, the sideband peak count (SPC) technique is used for revealing the stress-induced damage corresponding to each load step. In comparison to linear ultrasonic parameters, the nonlinear ultrasonic parameter SPC-I appears to be more sensitive to the variations of the internal material structures during both loading and unloading phases. Moreover, the SPC technique has shown to be capable of identifying both the initial damage due to the evolution and nucleation of microcracks at the microscopic scale, and the subsequent damages induced by high overload, resulting in an irreversible degradation of the mechanical properties.