Search

This paper describes the so-called Kiss Bridge. This structure resembles a kiss, a subtle touch of structures. The beams have been structurally designed to adapt the Japanese art of paper folding called "origami." The material used for constructing the floating beams is white reinforced concrete in the form of folded shells. The two geometrically different parts have distinct structural behaviors. The length of the main pathway of both structures is over 60 m. The pedestrian bridge crosses an artificial rainwater channel with a skew of 45° with respect to the referred channel. The joint between the cantilever structure and the Y-shaped one is located over the middle of the channel. Each stretch has different transversal sections. The pedestrian bridge is made with prestressed self-compacting reinforced concrete of 60 MPa. The foundation is shallow, comprising footings and footing beams made of 25 MPa conventional concrete. The cantilever structure with its foundations is designed as a semi-integral bridge whereas the Y-shaped one is an integral structure. The dynamic behavior of the structure was carefully studied to ensure that the dynamic loads generated by pedestrians do not cause excessive vibrations, especially to the cantilever structure, which could present dynamic interactions with the pedestrians walking. The bridge was recognized, in the 2014 edition of the fib Awards for Outstanding Concrete Structures, for having made a valuable contribution to the imageand promotion of concrete structures. [ABSTRACT FROM AUTHOR]

Ultra-high-performance fibre-reinforced concrete (UHPFRC) is defined as a cement-based composite material that combines three technical advances in concrete: high compressive strength, presence of steel fibres and flowability. Since UHPFRC is a very expensive material, in order that UHPFRC can be considered as a competitive alternative in structural applications, it is necessary to optimise the design of structural systems. This process leads to UHPFRC lightweight structures that minimise the concrete needs and give solutions more similar to steel than concrete. The innovative design of the 43,5 m span footbridge, constructed only with UHPFRC and placed over the Ovejas ravine in Alicante, Spain, is presented in this paper. The new UHPFRC footbridge has replaced the former design devised in steel due to many factors such as lower construction and maintenance costs, high durability in aggressive environment close to the sea leading to an increase in service life and its aesthetic enhancement. This paper covers several issues about the design and construction of this singular footbridge, such as design justification, structural evaluation, UHPFRC mix design, quality control and construction process at all stages. The static and dynamic load tests performed are also presented. The footbridge over the Ovejas ravine has become the first structure constructed with UHPFRC in Spain, and as far as we know, it is the first truss pedestrian footbridge made only of UHPFRC in the world. [ABSTRACT FROM AUTHOR]

This paper describes the evolution over five months of the dynamic parameters of a long-span metal arch bridge with an upper deck opened to road traffic. The experimental dynamic behaviour of the structure was analysed, comparing the experimental results with those of the computational model, the previous studies and other technical references. As the bridge did not undergo any damage during the monitoring period, studies were also conducted on the possible causes of the variations in time of both the natural vibration frequencies and the modal damping ratios of the structure. The experimental values of the natural vibration frequencies are steadier than those of the registered damping ratios, and the small variations produced in frequencies seem to be strongly influenced by ambient temperature. [ABSTRACT FROM AUTHOR]