3,711 results
Search Results
2. Sensitivity Study Using Synthetic 3D Image Datasets to Investigate the Effect of Noise Artefacts on Digital Volume Correlation
3. Microstructural and Mechanical Investigations in the Solution Annealing Heat Treatment of AlMo0.5NbTa0.5TiZr Refractory High-Entropy Alloy
4. Preparation and Room Temperature Phosphorescent Properties of Cd(II) Homo- and Zn(II)Cd(II) Heterometallic Coordination Polymers Microstructures
5. Analysis of Microstructural Transformations Induced by Thermal Aging of Co-Cr-Ni-W-C Alloy Deposits and Their Impact on Corrosion Behavior in a 3.5% NaCl Medium
6. Effect of Friction Time on Temperature Distribution, Plastic Flow, Microstructure, and Properties in Friction Welding of 1045 Carbon Steel and AISI 430 Ferritic Stainless Steel
7. Microstructure and Properties of AlCoCrFeNi2.1 Eutectic High-Entropy Alloy Coatings Fabricated by Extreme High-Speed and Conventional Laser Cladding
8. Synergetic Effects of Macro- and Microscopic Residual Stresses Induced by High-Frequency Mechanical Impact Post-weld Treatment on Fatigue Strength Enhancement of S335 Steel T-Weld
9. Microstructures and Properties of WC-10 wt.%CoCrFeNiAlx Composite Cemented Carbides
10. A Mechanics-Based Phase-Field Model and Finite Element Simulations for Microstructure Evolution during Solidification of Ti-6Al-4V
11. Fabrication of Titanium Aluminide Alloys by Twin-Wire Tungsten Inert Gas Welding Applied with High-Frequency Induction Heating Wire Technology: Processing, Microstructure, and Properties
12. Erosion of a Titanium Plate Heat Exchanger Due to Hydrogenation
13. The Effect of Post-Weld Aging Treatments on the Microstructure, Texture, and Mechanical Properties of Grade 250 Maraging Steel Laser Weldments
14. Microstructure and Hardness Analysis of Aluminum Alloy Gradient Plate Prepared by Friction Stirring After Heat Treatment
15. Microstructural Evaluation of Tungsten Carbide Cobalt (WC-17Co) Alloy Deposited by High-Velocity Oxygen Fuel, High-Velocity Air Fuel, and Cold Spraying Technologies
16. Effects of Heat Treatment on Microstructure, Mechanical Properties, and Residual Stress of Oscillation Laser–Tungsten Inert Gas Hybrid Welded Joints for SA-738Gr.B Steel
17. Application of Ultrasonic Power in Forming Sn58Bi/Cu Solder Joints with Trace Si3N4 Nanowire Doping
18. Role of Stable Keyhole Mode in the Formability, Microstructure, and Mechanical Properties of High Layer Thickness in Laser Powder Bed Fusion of Ti-6Al-4V Alloy
19. Numerical Optimization and Performance Study of Ni-Based Coatings on Gray Cast Iron Surface by High-Speed Laser Cladding Based on Orthogonal Test
20. Microstructure Evolution and Enhanced Wear Resistance of Al2CrFeNiMo High Entropy Alloy Coating Fabricated by Laser Cladding
21. Temperature Dependent Dynamic Response of Open-Cell Polyurethane Foams
22. Microstructural and Mechanical Characterization of Selective Laser Melted 17-4 PH Stainless Steel: Effect of Laser Scan Strategy and Heat Treatment
23. Synthesis and Characterization of Mg-Al-Zn Alloy-Based Bimodal Hybrid Composites with SiC and TiO2
24. Effect of Initial 〈0001〉||RD Orientation on the Rolling Texture of AZ91 Alloy
25. Impact of Various Drying Technologies on the Drying Characteristics, Physico-chemical Properties, and Antioxidant Capacity of Walnut Green Husk
26. Effects of V Element and Heat Treatment Process on Microstructure and Mechanical Properties of Additive Manufacturing of Titanium Aluminum Alloy Using Flux-Core Arc Welding Wire with TiH2 Powder
27. Effect of Rare Earth Lanthanum Addition on Microstructure and Properties of Pure Titanium
28. Effect of Surface Nano Structuring on Corrosion and Tribocorrosion Behavior of Ti6Al4V Alloy in Simulated Body Fluid
29. Comparative Analysis of Microstructure Evolution and Mechanical Properties of Dissimilar Welded Joints of AA7075/AA6061 via Friction Stir Welding, Tungsten Inert Gas Welding, and Tungsten Inert Gas + Friction Stir Processing
30. Effects of Three Emerging Non-thermal Pretreatments on Drying Kinetics, Physicochemical Quality, and Microstructure of Garlic Slices
31. Magnetic Properties, Phase Evolution, and Microstructure of Fe90Nb10 Powder Mixtures
32. Improving energy storage performance of sol-gel-derived PbZrO3 thin films by adjusting the water/acetic acid solvent ratio
33. Effect of Cu Particles on the Properties of Sn-Bi-Pb Low-Melting-Point Alloys
34. Doping effects on mechanical properties of nanoporous gold systems
35. Developing Fittingly Comprehensive Performance Carbon Nanotube/Mg-6Zn Sheets with Substantial Enhancement in Formability
36. Microstructure-Based Creep Life Assessment of 1CrMoV Turbine Rotor Steels After Long-Term Service
37. Experimental Investigation and Thermodynamic Assessment of Phase Equilibria in the Al-Ta-V Ternary System
38. Laser additive manufacturing of Cu–Cr–Nb alloys by using elemental powder
39. Effect of Fe Concentration on the High Temperature Oxidation Behavior of Fex(CrAlNi)100−x Medium Entropy Alloys
40. Failure Analysis of the Various Sides of a Second-Stage Gas Turbine Nozzle Made of FSX-414 Cobalt-Based Alloy
41. Understanding the Mechanism of Stress Corrosion Cracking Resistance in Stainless Steel Welds Subjected to Laser Shock Peening without Coating for Nuclear Canister Applications
42. Optimization of Residual Stresses, Tool Wear, and Material Removal Rate of Tempered EN-36C Alloy Steel in CNC Turning Using Response Surface Methodology
43. Recent Developments in Cladding and Coating Using Cold Metal Transfer Technology
44. Effect of TiC and Magnetic Field on Microstructure and Mechanical Properties of IN738 Superalloy Processed by Selective Laser Melting
45. Effect of Build Orientation on Metallurgical and Mechanical Properties of Additively Manufactured Ti-6Al-4V Alloy
46. Effect of Ce and Y on Microstructures and Properties of Al-11.0Zn-3.1Mg-1.22Cu-0.1Sr-0.2Zr-0.1Ti Alloy
47. Influence of N2 Flow Rate on the Microstructure, Mechanical, and Tribological Properties of Ti-Al-Cr-N Coating: Dry Milling Investigation on 6061 Aluminum Alloy
48. Microstructure, Mechanical, and Corrosion Properties of Mg-Zn-Ga Alloy after Hot Rolling
49. Investigation of the Effect of Process Parameters and Geometry-Related Variations on Residual Stress for Aluminum 7050 Alloy Produced via Laser Powder Bed Fusion
50. Study on Machinability of SiCp/Al Composites by Laser-Induced Oxidation-Assisted Turning
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.