77 results on '"Várez, A."'
Search Results
2. Environmental assessment and conductivity performance of calcium-based polymer electrolytes for the next generation of solid-state batteries
3. Optimisation of powder extrusion moulding process for thick ceramic electrodes of LiCoO2 for enhanced energy-density lithium-ion batteries
4. In situ cross-linking strategy for the synthesis of three-dimensional interconnected polymer/ceramic composite electrolyte
5. Life cycle assessment of lab-scale solid sodium-ion batteries: A sustainable alternative to liquid lithium-ion batteries
6. High-capacity Li4Ti5O12-C thick ceramic electrodes manufactured by powder injection moulding
7. All-solid-state sodium-ion batteries operating at room temperature based on NASICON-type NaTi2(PO4)3 cathode and ceramic NASICON solid electrolyte: A complete in situ synchrotron X-ray study
8. High performance NASICON ceramic electrolytes produced by tape-casting and low temperature hot-pressing: Towards sustainable all-solid-state sodium batteries operating at room temperature
9. 3D-printing of easily recyclable all-ceramic thick LiCoO2 electrodes with enhanced areal capacity for Li-ion batteries using a highly filled thermoplastic filament
10. Proton conducting sulfonated polysulfone and polyphenylsulfone multiblock copolymers with improved performances for fuel cell applications
11. Development of sodium hybrid quasi-solid electrolytes based on porous NASICON and ionic liquids
12. Non-woven polyaramid porous membranes as separators for Li-ion batteries?
13. New amphiphilic semi-interpenetrating networks based on polysulfone for anion-exchange membrane fuel cells with improved alkaline and mechanical stabilities
14. Trade-off analysis of C12A7:e− deposition techniques applied to Low Work Function Tethers
15. Engineering the electrical and optical properties of graphene oxide via simultaneous alkali metal doping and thermal annealing
16. Opening the door to liquid-free polymer electrolytes for calcium batteries
17. Multiblock copolymers of sulfonated PSU/PPSU Poly(ether sulfone)s as solid electrolytes for proton exchange membrane fuel cells
18. Structural, morphology and luminescence study of Er+3-doped garnet-type Li5La3Nb2O12 electrolytes as a potential new phosphor
19. Spectroscopy and Judd-Ofelt analysis of Er3+ ions in Li5La3Nb2O12 garnet-type ceramic powder
20. Study of the La1/2+1/2xLi1/2-1/2xTi1-xAlxO3 (0 ≤ x ≤ 1) solid solution. A new example of percolative system in fast ion conductors
21. Sodium polymer electrolytes composed of sulfonated polysulfone and macromolecular/molecular solvents for Na-batteries
22. Synthesis and characterization of sulfonated PEEK-WC-PES copolymers for fuel cell proton exchange membrane application
23. Aqueous and non-aqueous Li+/H+ ion exchange in Li0.44La0.52TiO3 perovskite
24. Evaluation of polyolefin-based macroporous separators for high temperature Li-ion batteries
25. Development of sodium-conducting polymer electrolytes: comparison between film-casting and films obtained via green processes
26. Electrochemical and structural characterization of sulfonated polysulfone
27. Study of the densification, mechanical and magnetic properties of Ni–Zn ferrites sintered in a solar furnace
28. Thermal and mechanical characterization of injection moulded high density polyethylene/paraffin wax blends as phase change materials
29. Microstructural study of duplex stainless steels obtained by powder injection molding
30. Characterization of 430L porous supports obtained by powder extrusion moulding for their application in solid oxide fuel cells
31. Structural characterisation and Li conductivity of Li1/2−xSr2xLa1/2−xTiO3 (0
32. The log(σ) vs. log(ω) derivative plot used to analyze the ac conductivity. Application to fast Li+ ion conductors with perovskite structure
33. The role of Ce reduction in the segregation of metastable phases in the ZrO2–CeO2 system
34. Powder injection moulding of premixed ferritic and austenitic stainless steel powders
35. Microstructure, magnetic and mechanical properties of Ni–Zn ferrites prepared by powder injection moulding
36. Corrigendum to “High-capacity Li4Ti5O12-C thick ceramic electrodes manufactured by powder injection moulding” [J. Eur. Ceram. Soc. 44 (2024) 978–985]
37. Influence of powder particle size distribution on rheological properties of 316 L powder injection moulding feedstocks
38. Fabrication of 8-YSZ thin-wall tubes by powder extrusion moulding for SOFC electrolytes
39. Li mobility in Li 0.5 − xNa xLa 0.5TiO 3 perovskites (0 ≤ x ≤ 0.5) : Influence of structural and compositional parameters
40. Tape casting manufacturing of thick Li4Ti5O12 ceramic electrodes with high areal capacity for lithium-ion batteries
41. Production of alumina parts by powder injection molding with a binder system based on high density polyethylene
42. Influence of octahedral tilting and composition on electrical properties of the Li 0.2 − xNa xLa 0.6TiO 3 (0 ≤ x ≤ 0.2) series
43. Structural characterization of Ce 1− xZr xO 2 (0 ≤ x ≤ 1) samples prepared at 1650 °C by solid state reaction : A combined TEM and XRD study
44. Metal injection moulding of HS12-1-5-5 high-speed steel using a PW-HDPE based binder
45. Comparison of structure and properties of the HS12-1-5-5 type high-speed steel fabricated using the pressureless forming and PIM methods
46. Effect of quenching on structure and antiferroelectric instability of La (2− x)/3 Li xTiO 3 compounds: a Raman study
47. Structure and mechanical properties of HSS HS6-5-2- and HS12-1-5-5-type steel produced by modified powder injection moulding process
48. Fabrication methods and heat treatment conditions effect on tribological properties of high speed steels
49. Sintering in different atmospheres of T15 and M2 high speed steels produced by a modified metal injection moulding process
50. Rhombohedral-cubic transition in Li 0.2Na 0.3La 0.5TiO 3 perovskite
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.