52 results on '"Uchida, Makoto"'
Search Results
2. Pt nanorods supported on Nb-doped ceria: A promising anode catalyst for polymer electrolyte fuel cells
3. Mechanical modeling of polyamide 6 obtained from different thermal histories
4. Analysis of performance stability under conditions of high & low humidity of polymer electrolyte fuel cells with interdigitated gas flow channels formed on a gas diffusion layer: An X-ray imaging and modeling study
5. Evaluation of the relationships in the tensile plastic deformations and the nano-micro structures of PA6 and PAMXD10 with different thermal histories
6. Viscoelastic-viscoplastic modeling of epoxy based on transient network theory
7. Mechanical modeling and testing of different polyamides considering molecular chain structure, crystallinity, and large strains
8. Effect of water management in membrane and cathode catalyst layers on suppressing the performance hysteresis phenomenon in anion-exchange membrane fuel cells
9. Characterization of size-affected non-uniform deformation of polycrystalline copper
10. Enhanced oxygen reduction electrocatalysis on PtCoSn alloy nanocatalyst mediated by Ta-doped SnO2 support for polymer electrolyte fuel cells
11. Performance hysteresis phenomena of anion exchange membrane fuel cells using an Fe–N–C cathode catalyst and an in-house-developed polymer electrolyte
12. Visualization of the oxygen partial pressure in a proton exchange membrane fuel cell during cell operation with low oxygen concentrations
13. PEFC catalyst layers: Effect of support microstructure on both distributions of Pt and ionomer and cell performance and durability
14. Evaluation and modeling of mechanical behaviors of thermosetting polymer under monotonic and cyclic tensile tests
15. Effects of two scaling exponents on biaxial deformation and mass transport of swollen elastomers
16. Experimental modeling of nonuniform deformation in finite volume evaluation region of heterogeneous material
17. Durability and degradation analysis of hydrocarbon ionomer membranes in polymer electrolyte fuel cells accelerated stress evaluation
18. Simultaneous visualization of oxygen partial pressure, current density, and water droplets in serpentine fuel cell during power generation for understanding reaction distributions
19. Use of a sub-gasket and soft gas diffusion layer to mitigate mechanical degradation of a hydrocarbon membrane for polymer electrolyte fuel cells in wet-dry cycling
20. Load cycle durability of a graphitized carbon black-supported platinum catalyst in polymer electrolyte fuel cell cathodes
21. Effects of carbon supports on Pt distribution, ionomer coverage and cathode performance for polymer electrolyte fuel cells
22. Novel strategy to mitigate cathode catalyst degradation during air/air startup cycling via the atmospheric resistive switching mechanism of a hydrogen anode with a platinum catalyst supported on tantalum-doped titanium dioxide
23. Evaluation of ship performance in international maritime transportation using an onboard measurement system - in case of a bulk carrier in international voyages
24. Performance of practical-sized membrane-electrode assemblies using titanium nitride-supported platinum catalysts mixed with acetylene black as the cathode catalyst layer
25. Effects of short-side-chain perfluorosulfonic acid ionomers as binders on the performance of low Pt loading fuel cell cathodes
26. Effects of Incorporation of SiO2 Nanoparticles into Sulfonated Polyimide Electrolyte Membranes on Fuel Cell Performance under Low Humidity Conditions
27. Deleterious effects of interim cyclic voltammetry on Pt/carbon black catalyst degradation during start-up/shutdown cycling evaluation
28. Investigation of the effect of a hydrophilic layer in the gas diffusion layer of a polymer electrolyte membrane fuel cell on the cell performance and cold start behaviour
29. Characterization of Pt catalysts on Nb-doped and Sb-doped SnO2–δ support materials with aggregated structure by rotating disk electrode and fuel cell measurements
30. Micro-, meso- to macroscopic modeling of deformation behavior of semi-crystalline polymer
31. Investigation of the effect of pore diameter of gas diffusion layers on cold start behavior and cell performance of polymer electrolyte membrane fuel cells
32. Investigation of the corrosion of carbon supports in polymer electrolyte fuel cells using simulated start-up/shutdown cycling
33. Experimental analyses of low humidity operation properties of SiO2-containing catalyst layers for polymer electrolyte fuel cells
34. Sequential evaluation of continuous deformation field of semi-crystalline polymers during tensile deformation accompanied by neck propagation
35. Corrosion of carbon supports at cathode during hydrogen/air replacement at anode studied by visualization of oxygen partial pressures in a PEFC—Start-up/shut-down simulation
36. Finite element simulation of deformation behavior of semi-crystalline polymers with multi-spherulitic mesostructure
37. New evaluation method for the effectiveness of platinum/carbon electrocatalysts under operating conditions
38. Gas diffusion electrodes containing sulfonated poly (arylene ether) ionomer for polymer electrolyte fuel cells: Part 2. Improvement of the cathode performance
39. Gas diffusion electrodes containing sulfonated poly (arylene ether) ionomer for PEFCs: Part 1. Effect of humidity on the cathode performance
40. Influence of a network structure on the network effect in the communication service market
41. Development of ion transportation, extraction and neutralization systems for atomic beam resonance method
42. Computational characterization of micro- to mesoscopic deformation behavior of semicrystalline polymers
43. Characterization of micro- to macroscopic deformation behavior of amorphous polymer with heterogeneous distribution of microstructures
44. Boosting Pt oxygen reduction reaction activity by tuning the tin oxide support
45. Effects of microstructure in catalyst layer on the performance of PEFC
46. Cathodic performance and high potential durability of Ta-SnO2 − δ-supported Pt catalysts for PEFC cathodes
47. Real-time visualization of oxygen partial pressures in straight channels of running polymer electrolyte fuel cell with water plugging
48. Durability of an aromatic block copolymer membrane in practical PEFC operation
49. SiO2-containing catalyst layers for PEFCs operating under low humidity
50. Applications of the gas diffusion electrode to a backward feed and exhaust (BFE) type methanol anode
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.