49 results on '"Jiang, Fulin"'
Search Results
2. An enhanced water-lubrication method: Friction-reducing and diffusion properties of secondary lubricants
3. Deformation mechanisms and microstructural characteristics of AZ61 magnesium alloys processed by a continuous expansion extrusion approach
4. Signal interference between drugs and metabolites in LC-ESI-MS quantitative analysis and its evaluation strategy
5. Microstructure, mechanical properties, and strengthening mechanisms of ultra-high strength Al-Zn-Mg-Cu alloy prepared by continuous extrusion forming process
6. Reinforcement learning-based energy efficiency optimization for RIS-Assisted UAV hybrid uplink and downlink system
7. Deformation mechanisms and mechanical properties of the high-strength and ductile Al-Zn-Mg-Cu alloys processed by repetitive continuous extrusion forming process with different heat treatments
8. Evaluation of automated detection of head position on lateral cephalometric radiographs based on deep learning techniques
9. Influence of pre-precipitation on the multi-stage hot deformation behavior of an Al-Cu-Mg-Zr alloy: Experiments and integrated modeling
10. Additive manufacturing of fine-grained high-strength titanium alloy via multi-eutectoid elements alloying
11. Microstructural characteristics and deformation behaviors of an Al–Mg–Si alloy with improved strength and conductivity processed by continuous casting and expansion extrusion
12. Effect of quenching residual stress on precipitation behaviour of 7085 aluminium alloy
13. Microstructural characteristics and tribological behavior of an additively manufactured Ti-6Al-4V alloy under direct aging and solution-aging treatments
14. Phase transformation mechanisms, microstructural characteristics and mechanical performances of an additively manufactured Ti-6Al-4V alloy under dual-stage heat treatment
15. Revealing the cryogenic-temperature toughness and deformation mechanisms in high manganese austenitic steels
16. Unraveling precipitation evolution and strengthening function of the Al-Zn-Mg-Cu alloys with various Zn contents: Multiple experiments and integrated internal-state-variable modeling
17. Constitutive and microstructural characteristics of Ti-5Al-2.5Sn alloy during isothermal and non-isothermal multi-stage hot deformation across different phase regions
18. Diagnostic validity of different gonial angle segmentation for the assessment of mandibular growth direction: A retrospective study
19. Experimental and modeling investigations of the non-isothermal and isothermal precipitations in an Al-Cu-Mg-Zr alloy with various pre-precipitation microstructures
20. Revealing the decomposition mechanisms of dislocations and metastable α' phase and their effects on mechanical properties in a Ti-6Al-4V alloy
21. Influence of sea wave shock on transient start-up performance of water-lubricated bearing
22. Microstructure evolution and corrosion resistance improvement of Mg–Gd–Y–Zn–Zr alloys via surface hydrogen treatment
23. Microstructure, mechanical properties and deformation characteristics of Al-Mg-Si alloys processed by a continuous expansion extrusion approach
24. Unravelling the precipitation evolutions of AZ80 magnesium alloy during non-isothermal and isothermal processes
25. Microstructure and mechanical behaviors of 6061 Al matrix hybrid composites reinforced with SiC and stainless steel particles
26. Integrated physically based modeling for the multiple static softening mechanisms following multi-stage hot deformation in Al-Zn-Mg-Cu alloys
27. Reduced residual stress and retained properties in Al-Zn-Mg-Cu alloys using a novel cladding quenching process
28. Nonadditive strengthening functions for cold-worked cubic metals: Experiments and constitutive modeling
29. Static softening behavior and modeling of an Al–Cu–Mg–Zr alloy with various pre-precipitation microstructures during multistage hot deformation
30. Post-dynamic α to β phase transformation and reverse transformation of Ti-5Al-3V alloy after hot deformation in two phase region
31. Effect of Zn content on the static softening behavior and kinetics of Al–Zn–Mg–Cu alloys during double-stage hot deformation
32. Strain path dependent evolutions of microstructure and texture in AZ80 magnesium alloy during hot deformation
33. Simultaneous determination of curcumin, tetrahydrocurcumin, quercetin, and paeoniflorin by UHPLC-MS/MS in rat plasma and its application to a pharmacokinetic study
34. The role of various Zr additions in static softening behavior of Al-Zn-Mg-Cu alloys during interval holding of double-stage hot deformation
35. Revealing the influence of pre-precipitation microstructure on hot workability in an Al-Cu-Mg-Zr alloy
36. A new diffraction line profile breadth analysis approach for evaluating plastic lattice strain anisotropy in cold-worked nickel under various strain paths
37. Schisandrol B promotes liver regeneration after partial hepatectomy in mice
38. A rapid and sensitive UHPLC–MS/MS method for quantification of 83b1 in plasma and its application to bioavailability study in rats
39. Characterizing precipitate evolution of an Al–Zn–Mg–Cu-based commercial alloy during artificial aging and non-isothermal heat treatments by in situ electrical resistivity monitoring
40. Determination of a novel Aurora-A (AurA) kinase AKI603 by UPLC-MS/MS and its application to a bioavailability study in rat
41. Microstructures and properties of Al–Mg–SI alloy overhead conductor by horizontal continuous casting and continuous extrusion forming process
42. Static softening following multistage hot deformation of 7150 aluminum alloy: Experiment and modeling
43. Constitutive characteristics and microstructure evolution of 7150 aluminum alloy during isothermal and non-isothermal multistage hot compression
44. Novel laser cladding FeCoNiCrNb0.5Mox high-entropy alloy coatings with excellent corrosion resistance
45. Comparative hot deformation characters of Al–Mn–Mg–RE alloy and Al–Mn–Mg–RE–Ti alloy
46. Analytical modeling and experimental investigation of tool and workpiece temperatures for interrupted cutting 1045 steel by inverse heat conduction method
47. Flow stress and microstructural evolution of the horizontal continuous casting Al–0.96Mn–0.38Si–0.18Fe alloy during hot compression
48. A novel repetitive continuous welding extrusion for refining grain size and evading strength-ductility trade-off in AZ31 magnesium alloy
49. Effects of Ti addition on the microstructures and mechanical properties of the Al–Mn–Mg–RE alloy
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.