Search

International audience; Block copolymers synthesized via Atom Transfer Radical Polymerization from alkyl acrylate and t-butyl acrylate and the subsequent hydrolysis of the t-butyl acrylate to acrylic acid were systematically varied with respect to their hydrophobic part by the variation in the alkyl chain length and the degree of polymerisation in this block. Depending on the architecture of the hydrophobic part, they had a more or less pronounced tendency to form copolymer micelles in an aqueous solution. They were employed for the preparation of IPECs by mixing the copolymer aggregates with the polycations polydiallyldimethylammonium chloride (PDADMAC) or q-chit. The IPEC structure as a function of the composition was investigated by Static Light and Small Angle Neutron Scattering. For weakly-associated block copolymers (short alkyl chain), complexation with polycation led to the formation of globular complexes, while already existing micelles (long alkyl chain) grew further in mass. In general, aggregates became larger upon the addition of further polycation, but this growth was much more pronounced for PDADMAC compared to q-chit, thereby leading to the formation of clusters of aggregates. Accordingly, the structure of such IPECs with a hydrophobic block depended largely on the type of complexing polyelectrolyte, which allowed for controlling the structural organisation via the molecular architecture of the two oppositely charged polyelectrolytes.

Due to the presence of cationic units interpolyelectrolyte complexes (IPECs) can be used as a universal basis for preparation of biocidal coatings on different surfaces. Metallopolymer nanocomposites were successfully synthesized in irradiated solutions of polyacrylic acid (PAA) and polyethylenimine (PEI), and dispersions of non-stoichiometric IPECs of PAA–PEI containing silver ions. The data from turbidimetric titration and dynamic light scattering showed that pH 6 is the optimal value for obtaining IPECs. Metal polymer complexes based on IPEC with a PAA/PEI ratio equal to 3/1 and 1/3 were selected for synthesis of nanocomposites due to their aggregative stability. Studies using methods of UV–VIS spectroscopy and TEM have demonstrated that the size and spatial organization of silver nanoparticles depend on the composition of polymer systems. The average sizes of nanoparticles are 5 nm and 20 nm for complexes with a molar ratio of PAA/PEI units equal to 3/1 and 1/3, respectively. The synthesized nanocomposites were applied to the glass surface and exhibited high antibacterial activity against both gram-positive (Staphylococcus aureus) and gram-negative bacteria (Salmonella). It is shown that IPEC-Ag coatings demonstrate significantly more pronounced biocidal activity not only in comparison with macromolecular complexes of PAA–PEI, but also coatings of PEI and PEI based nanocomposites.

Introduction. There are a number of drugs, the absorption zone of which is the upper region of the gastrointestinal tract (GIT) – the stomach and duodenum. To increase bioavailability, gastroretentive (intragastric) systems for the controlled drug delivery are being developed. To date, there are various approaches to ensure intragastric drug delivery. One of the most promising approaches is the use of excipients with bioadhesive properties, both individually and in combination with other types of gastroretentive systems.Aim. Development and research of new carriers for gastroretentive bioadhesive drug delivery systems based on interpolyelectrolyte complexes (IPEC) with the participation of chemically complementary poly(meth)acrylates of the Eudragit®.Materials and methods. The study of swelling ability was carried out in a medium of 0.1 M hydrochloric acid solution (pH 1.2) at a temperature of 37 ± 0.5 °C for 6 hours. The study of the release of metronidazole (MZ) from matrices based on the corresponding IPEC was performed on a DFZ II instrument (ERWEKA, Germany) according to the Flow Trough Cell method in 0.1 M HCl medium, pH 1.2, flow rate 4 ml/min in a closed cycle within 6 hours. The amount of released MZ was estimated by UV spectrophotometry on a Lambda 25 instrument (PerkinElmer, USA) at a wavelength of 274 nm. IPEC adhesion was studied using a TA.XTplus texture analyzer (Stable Micro Systems, UK).Results and discussion. Matrices based on IPEC 1 were disintegrated after being in a medium with a pH of 1.2 for 4 hours, matrices based on IPEC 4 were dissolved in an acidic medium for 3 hours. At the same time, matrices based on IPEC 2 and IPEC 3 retain their shape throughout the experiment and are characterized by rather high values of the degree of swelling. IPEC samples are characterized by higher adhesion performance compared to individual copolymers. The release of metronidazole from matrices based on IPEC 1 occurs in accordance with Fick's law of diffusion; from the matrix based on IPEC 4, MZ is released according to the anomalous transport mechanism.Conclusion. IPEC 3 is promising for use as carrier for gastroretentive bioadhesive systems of controlled delivery of metronidazole.

Introduction. One of the well-known requirements for buccal drug delivery systems is the demonstration of mucoadhesive properties of the carrier, ensuring retention on the mucosa for a long time with the gradual release of the included drug. It should be noted that one of the advantages of buccal systems compared with oral ones is the absence of the «first pass effect» through the liver.Aim. To carry out a physicochemical and pharmaceutical research of the interpolyelectrolyte complex (IPEC), obtained on the basis of pharmaceutically acceptable polymers – Eudragit® EPO and Noveon® AA-1, in comparison with the physical mixture and individual polymers, as a mucoadhesive delivery system of metronidazole for the treatment of periodontal diseases.Materials and methods. Obtained on the basis of a pair of pharmaceutical polymers (Eudragit® EPO and Noveon® AA-1), two IPEC samples were characterized by elemental analysis, FTIR spectroscopy, and modulated temperature differential scanning calorimetry (mDSC) in comparison with individual polymers and their physical mixtures. The study of swelling ability, bioadhesion and release was carried out in a medium simulating artificial salivary fluid (pH 7.0) at a temperature of 37 ± 0.1 °C. Mucoadhesion of polymer samples and IPEC was studied using a TA.XTplus texture analyzer (Stable Micro Systems, UK). The release of metronidazole (MD) from matrices based on the developed IPEC was studied on a CE 7Smart USP 4 apparatus (Sotax, Switzerland) using the Flow Trough Cell method at a speed a flow of 20 ml/min in an open cycle within 5 hours. The amount of released MD was estimated by UV spectrophotometry on a Lambda 25 instrument (PerkinElmer, USA) at a wavelength of 319 nm.Results and discussion. As a result of studies on the physicochemical and pharmaceutical properties, there was selected the optimal composition of a polycomplex carrier (IPEC 2) based on Eudragit® EPO and Noveon® AA-1, which is characterized by the required bioadhesive properties and the ability of providing controlled release of drug from the tablet matrix (with weight ratio MD/IPEC-2 1:0.5) in conditions mimicking oral cavity environment, which provides the necessary mode of buccal delivery of metronidazole in accordance with Fick's law of diffusion.Conclusion. IPEC 2 is a perspective for use as carrier for buccal controlled delivery of metronidazole.

Stabilization of the enzymes under stress conditions is of special interest for modern biochemistry, bioengineering, as well as for formulation and target delivery of protein-based drugs. Aiming to achieve an efficient stabilization at elevated temperature with no influence on the enzyme under normal conditions, we studied chaperone-like activity of thermoresponsive polymers based on poly(dimethylaminoethyl methacrylate) (PDMAEMA) toward two different proteins, glyceraldehyde-3-phosphate dehydrogenase and chicken egg lysozyme. The polymers has been shown to do not interact with the folded protein at room temperature but form a complex upon heating to either protein unfolding or polymer phase transition temperature. A PDMAEMA-PEO block copolymer with a dodecyl end-group (d-PDMAEMA-PEO) as well as PDMAEMA-PEO without the dodecyl groups protected the denatured protein against aggregation in contrast to PDMAEMA homopolymer. No effect of the polymers on the enzymatic activity of the client protein was observed at room temperature. The polymers also partially protected the enzyme against inactivation at high temperature. The results provide a platform for creation of artificial chaperones with unfolded protein recognition which is a major feature of natural chaperones. (C) 2018 Elsevier B.V. All rights reserved.

At present, a large amount of research works from experimental and theoretical points of view have been done on interpolyelectrolyte complexes formed by electrostatic interactions and/or interpolymer complexes stabilized by hydrogen bonds. On the contrary, relatively less attention has been given to polymer-polymer complex formation with synthetic polyampholytes. In this review the complexation of polyampholytes with polyelectrolytes is considered from theoretical and application points of view. Formation of intra- and interpolyelectrolyte complexes of random, regular, block, dendritic polyampholytes are outlined. The separate subchapter is devoted to amphoteric behavior of interpolyelectrolyte complexes. The realization of so-called “isoelectric effect” for interpolyelectrolyte complexes of water-soluble polyampholytes, amphoteric hydrogels and cryogels with respect to surfactants, dye molecules, polyelectrolytes and proteins is demonstrated.

The structural organization and thermomechanical properties of nanocomposites prepared from interpolyelectrolyte–metal complex (IMC) involving anionic polyelectrolyte, pectin and AgNO3, and cationic polyelectrolyte, poly(4-vinylpyridine), have been investigated using the methods of wide- and small-angle X-ray scattering and thermomechanical analysis. It is established that chemical reduction of Ag+ ions in the IMC by sodium borohydride results in formation of the nanocomposite based on the “pectin–poly(4-vinylpyridine)” interpolyelectrolyte complex (IPEC) and Ag0 nanoparticles as well. At the same time, the level of nanocomposites’ structural heterogeneity is substantially enhancing, while effective size of the heterogeneity regions decreases. The nanocomposites IPEC–Ag0 prepared are shown much bigger T g value and enhanced ability for deformation than those for IMC.

© 2017 Elsevier B.V.Solutions of the series of polymers (sodium polystyrene sulfonate, polyethyleneimine, and poly-N-vinylpyrrolidone) and certain mixtures thereof were studied by NMR relaxation and ESR spectroscopy using manganese(II) and gadolinium(III) ions as paramagnetic probes. The growth of the NMR-relaxation efficiency (relaxivity, R1,2) is observed in solutions of the anionic polymer, as well as the decrease of R1,2 - in the case of the cationic polymer. For mixtures of polymers, the dependent on the solution composition non-monotonic changes of R1,2 are caused either by a formation of metal-interpolymer complexes or by a competitive cation/polymer substitution. For both ions, the changes in the ESR spectra of their polyelectrolyte solutions were analyzed. In case of sodium polystyrene sulfonate and blends thereof, the ESR spectra parameters are only slightly broadened compared to the pure metal aqua ion's, whereas for the polyethyleneimine solution the ESR spectra lines broaden greatly at pH > 7 up to their disappearance. All these effects were explained by the distinction of ion probes’ binding mode to polyelectrolytes of different nature. Addition of NaCl to manganese(II) solutions containing polystyrene sulfonate, or mixtures thereof with PVP or PEI, lead to recovery of R1,2 values, close to the probes’ aqua ions relaxivities due to the release of the latter from the polymer/medium interface into the bulk water, while no changes were detected for PEI solutions.

Title: Self-assembly of polymers with amphiphilic compounds (surfactants) in aqueous solutions Abstract: This PhD Thesis is devoted to the co-assembly in systems containing electrically charged polymers (polyelectrolytes and block copolymers containing polyelectrolyte sequences). I studied the interactions between block copolymers and oppositely charged surfactants in aqueous solutions, and the structure and properties of co-assembled nanoparticles by a combination of several experimental methods. I found that the spontaneous formation, solubility and stability of complex nanoparticles depend not only on the electrostatic attractive forces but also on the hydrophobic effects. In a major part of my Thesis, I studied the interaction of polyelectrolytes with oppositely charged gemini surfactants (containing two charged head-groups interconnected by a short linker and two hydrophobic tails) which is a relatively new topic - much less studied than the co-assembly with conventional single tail surfactants. Better understanding of the formation and properties of complexes containing gemini surfactants and polymers provides knowledge that should lead to novel tailor-made nanoparticles with desired properties for applications in medicine and new technologies (including nano-technologies). We have shown that the...

This article is part of the Supramolecular Chemistry at Interfaces special issue. The layer-by-layer (LbL) assembly of salt-containing nonstoichiometric polyelectrolyte complexes (PECs) with oppositely charged uncomplexed polyelectrolyte for the fabrication of dewetting-induced porous polymeric films has been systematically investigated. Salt-containing poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA) complexes (noted as PAH-PAA) with a molar excess of PAH were LbL assembled with polyanion poly(sodium 4-styrenesulfonate) (PSS) to produce PSS/PAH-PAA films. The structure of the PAH-PAA complexes is dependent on the concentration of NaCl added to their aqueous dispersions, which can be used to tailor the structure of the LbLassembled PSS/PAH-PAA films. Porous PSS/PAH-PAA films are fabricated when salt-containing PAH-PAA complexes with a large amount of added NaCl are used for LbL assembly with PSS. In-situ and ex-situ atomic force microscopy measurements disclose that the dewetting process composed of pore nucleation and pore growth steps leads to the formation of pores in the LbL-assembled PSS/PAH-PAA films. The present study provides a facile way to fabricate porous polymeric films by dewetting LbL-assembled polymeric films comprising salt-containing PECs. Refereed/Peer-reviewed

Aim of this paper was that to prepare biocompatible, polyaspartamide based copolymers containing spermine or spermine/hydrophobic side chains able to condense nucleic acids and to transfect mammalian cells. Copolymers were prepared starting from α,β-poly-(N-2-hydroxyethyl)- d , l -aspartamide (PHEA) and exploiting the reactive hydroxyl groups in the polymeric side chains by subsequent activation reactions to obtain PHEA-Spermine (PHEA-Spm) and PHEA-Spermine-Butyramide (PHEA-Spm-C4). Molecular, physico-chemical and biological characterization of copolymers and interpolyelectrolyte complexes with plasmid DNA was performed. Experimental results evidenced that these copolymers are able to form complexes with plasmid DNA already at low polycation/DNA weight ratio ranging from 0.75/1 to 2/1. Interpolyelectrolyte complexes with decreased size were obtained when increasing the polycation/DNA weight ratio, until nanosized dimensions were reached. Copolymers as well as complexes were not haemolytic and non toxic in vitro. In vitro cell transfection with PHEA derivatives showed good biocompatibility and high transfection efficiency (luciferase) in cancer cells in comparison with commercially available, but toxic transfection agents.

We have investigated the formation of complexes between negatively charged niosomal vesicles (hybrid niosomes), built up by dicethylphosphate [DCP], Tween 20 and Cholesterol, and three linear differently charged cationic polyions, such as alpha-polylysine, epsilon-polylysine, and polyethylvinylpyridinium bromide [PEVP], with two different substitution degrees. Our aim is to investigate the interaction mechanism between anionic-nonionic vesicles (hybrid niosomes) and linear polycations, characterizing the resulting aggregates in view of possible applications of these composite colloidal particles as vectors for multidrug delivery. In order to explore the aggregation behavior of the complexes and to gain information on the stability of the single niosomal vesicles within the aggregates, we employed dynamic light scattering (DLS), laser Doppler electrophoretic measurements, and fluorescence measurement techniques. The overall phenomenology is well described in terms of the re-entrant condensation and charge inversion behavior, observed in different colloidal systems. The aggregate size and overall charge depend on the charge ratio between vesicles and polyions, and the aggregates reach their maximum size at the point of charge inversion (re-entrant condensation). While the overall phenomenology is similar for all three polycations investigated, the stability and the integrity of the hybrid niosomal vesicles forming the aggregates strongly depend on the chemical structure of the polycations. The role of the polycations in the aggregation process is discussed by identifying specific interactions with the niosomal membrane, pointing out their importance for possible applications as drug delivery vectors.

Applying wide-angle X-ray scattering method, thermomechanical analysis, and differential scanning calorimetry, the structural organization and properties of nanocomposites formed by chemical reduction of Сu(2+) cations in the interpolyelectrolyte-metal complex (pectin-Cu(2+)-polyethyleneimine) under the influence of a constant magnetic and electric fields have been studied. It has been found that the chemical reduction of Cu(2+) cations in the interpolyelectrolyte-metal complex bulk under constant electric and magnetic fields leads to formation of nanocomposite consisting of interpolyelectrolyte complex, including pectin-polyethyleneimine and nanoparticles of the metal Cu phase, whereas nanocomposite with Cu/Cu2O nanoparticles is formed in original state (without any field). It was observed that, under constant field, nanocomposites obtained have higher structural glass-transition temperatures and thermal stability.

In this review we present an overview of the developments of (self-)assembly of linear block copolymers containing one or more polyelectrolyte blocks in aqueous solution. Different micellar structures and phase behaviour are described. The role of inter- and intramolecular complex coacervation is emphasised. Recent developments in applications of assembly of polyelectrolyte-containing copolymers are presented.

The interaction between protein and soluble organic matter is studied through layer-by-layer assembly of lysozyme (LSZ) and purified Aldrich humic acid (PAHA) at a solid surface (2-D) and in solution (3-D). By bringing a silica surface in alternating contact with solutions of LSZ and PAHA a layer-by-layer LSZ-PAHA assembly is formed. At pH 5 the negative charge density of PAHA is about 3 times that of the positive LSZ; the layers of LSZ and PAHA are stable and the adsorbed amounts decrease with increasing ionic strength. The mass ratios PAHA/LSZ in the layers depend on the ionic strength; K+ incorporation is relatively large (similar to 25%) when PAHA is the outer layer of the assembly. At pH 6 and 8, and moderate ionic strength (0-100 mmol L-1 KCl) the assembly is accompanied by partial solubilization of positive LSZ by the much more negative PAHA followed by desorption of the complex. The solubilization increases with increasing pH, and decreases with increasing KCl concentration. At 400 mmol L-1 KCl the electrostatic interactions are so well screened that the assembly is no longer accompanied by layer erosion. Assembly of PAHA and LSZ in solution is also investigated at pH 5 and 5 mmol L-1 KCl. The PAHA/LSZ mass ratio at the iso-electric point of the assembly depends on the order of the addition. When LSZ is added to the negative assembly K+ is incorporated in the complex, but when PAHA is added to the positive assembly PAHA and LSZ neutralize each other. (C) 2014 Elsevier Inc. All rights reserved.

The demand for ever more complex nanostructures in materials and soft matter nanoscience also requires sophisticated characterization tools for reliable visualization and interpretation of internal morphological features. Here, we address both aspects and present synthetic concepts for the compartmentalization of nanoparticle peripheries as well as their in situ tomographic characterization. We first form negatively charged spherical multicompartment micelles from ampholytic triblock terpolymers in aqueous media, followed by interpolyelectrolyte complex (IPEC) formation of the anionic corona with bis-hydrophilic cationic/neutral diblock copolymers. At a 1:1 stoichiometric ratio of anionic and cationic charges, the so-formed IPECs are charge neutral and thus phase separate from solution (water). The high chain density of the ionic grafts provides steric stabilization through the neutral PEO corona of the grafted diblock copolymer and suppresses collapse of the IPEC; instead, the dense grafting results in defined nanodomains oriented perpendicular to the micellar core. We analyze the 3D arrangements of the complex and purely organic compartments, in situ, by means of cryogenic transmission electron microscopy (cryo-TEM) and tomography (cryo-ET). We study the effect of block lengths of the cationic and nonionic block on IPEC morphology, and while 2D cryo-TEM projections suggest similar morphologies, cryo-ET and computational 3D reconstruction reveal otherwise hidden structural features, e.g., planar IPEC brushes emanating from the micellar core.

Interpolymer interactions between the countercharged methacrylate copolymers Eudragit® RL 30D (polycation) and Eudragit® FS 30D (polyanion), were investigated in conditions mimicking the gastrointestinal environment. The formation of inter-macromolecular ionic bonds between Eudragit® RL 30D and Eudragit® FS 30D was investigated using FT-IR spectroscopy and modulated DSC. The FT-IR spectra of the tested polymeric matrices are characterized by visible changes in the observed IR region indicating the interaction between chains of two oppositely charged copolymers. A new band at 1570 cm-1 appeared which was assigned to the absorption of the carboxylate groups that form the ionic bonds with the quaternary ammonium groups. Moreover, while increasing the pH values from pH 5.8 to 7.4, a decrease of the intensity of the band at 960 cm-1 (quaternary ammonium group vibration) was observed. All binary mixtures were characterized by the presence of only one and narrow Tg, pointing to sample homogeneity, because of the compatibility of components. As a result of electrostatic interaction between the copolymer chains during swelling, the resulting Tg is decreased significantly and was dependent on the quantity of copolymers present in the structure of polycomplexes formed. Overall, the interaction between countercharged copolymers during passage in gastrointestinal tract can strongly modify the release profile of the model drug diclofenac sodium. © 2012 Elsevier B.V. All rights reserved.

With a view to the application in oral controlled drug delivery systems (DDS), the design of new interpolyelectrolyte complexes (IPECs) between countercharged types of Eudragit® EPO (EPO) and Eudragit® L 100-55 (L100-55) was investigated. The formation and composition of four new IPECs between EPO and L100-55 were established by elementary analysis. The structure of the synthesized IPEC was investigated using FTIR spectroscopy and modulated-temperature differential scanning calorimetry. The binding ratio of a unit molecule of EPO with L100-55 was found to range between 1:2.75 (Z = 0.36) and 1:0.55 (Z = 1.81) while increasing the pH value from 5.5 to 7.0. As a result of electrostatic interaction between the copolymer chains, the glass transition temperature of the IPEC increased significantly. A large pH-sensitive swelling behavior was observed for different structures of the IPECs. The outcome of swelling and diclofenac sodium release from the polycomplex matrices confirm that they have great potential to be used as a controlled DDS in specified regions of gastrointestinal tract. © 2010 Wiley-Liss, Inc. and the American Pharmacists Association.

En este Trabajo de Tesis se estudiaron los polisacáridos del alga roja Polysiphonia nigrescens, recolectada en las costas de Cabo Corrientes (Mar del Plata). Este alga biosintetiza agaranos sulfatados parcialmente ciclados y altamente sustituidos en C-6, principalmente con sulfato, aunque también se han encontrado éteres metílicos y ramificaciones simples de β-D-xilosa. Las dos díadas presentes en los galactanos de esta especie son: G6S→L6S (precursora) y G6S→LA. También se aisló una fracción compuesta por agarosa sulfatada. Además se sintetizaron agarosas cationizadas de distinto grado de sustitución (0,04-0,77), empleando cloruro de 3-cloro-2-hidroxipropil trimetilamonio. Se evaluaron diferentes parámetros de la reacción sobre el grado de sustitución y el peso molecular: concentración de reactivos, temperatura, tiempo y el agregado de NaBH4. Los productos se caracterizaron mediante microscopía electrónica de barrido, FT-IR, viscosimetría y RMN. Productos de metanólisis se estudiaron por espectrometría de masa ESI. Algunas agarosas cationizadas, se desempeñaron en la floculación de coloides de manera comparable a poliacrilamidas comerciales. Finalmente, se prepararon los siguientes complejos interpolielectrolito (IPECs) estequimétricos: eudragit E - carragenano kappa, almidón cationizado - carragenano kappa, eudragit E - agaranos de P. nigrescens y agarosa cationizada - agaranos de P. nigrescens. Se estudiaron dichos IPECs: turbidimetría, análisis elemental, FT-IR, microscopía electrónica de barrido y óptica, área superficial, ángulo de reposo, perfil de compactabilidad e hinchamiento. Se prepararon comprimidos por compresión directa, constituidos por los IPECs e ibuprofeno como droga modelo. Los perfiles de liberación de la droga ajustaron adecuadamente a dos modelos matemáticos, presentando cinéticas cercanas a orden cero. In this Thesis the red seaweed Polysiphonia nigrescens polysaccharides, collected in Cabo Corrientes shores (Mar del Plata) were studied. This seaweed biosynthesizes sulphated agarans partially ciclyzed and highly substituted on C-6, mainly with sulphate, however methyl ethers and β-D-xylose single stubs were found. The two diads present in the agarans of this species are: G6S→L6S (precursor) and G6S→LA. A fraction composed by sulphated agarose was also isolated. Besides, cationized agaroses with different degrees of substitution were synthesized (0.04-0.77), employing 3-chloro-2-hydroxypropyl trimethylammonium chloride. Different reaction parameters were evaluated on the substitution degree and molecular weight: reactives concentration, temperature, time and addition of NaBH4. The products were characterized by means of scanning electronic microscopy, FT-IR, viscosimetry and NMR. Products of methanolysis were studied by ESI mass spectrometry. Some cationized agaroses presented a similar performance to commercial polyacrylamides, in colloid flocculation. Finally, the following stoichiometric interpolyelectrolyte complexes (IPECs) were prepared: eudragit E - kappa carrageenan, cationized starch - kappa carrageenan, eudragit E - agarans from P. nigrescens and cationized agarose - agarans from P. nigrescens. Those IPECs were studied: turbidimetry, elemental analysis, FT-IR, scanning electronic and optical microscopy, surface area, angle of repose, compactibillity profile and swelling. Tablets composed by the IPECs and ibuprofen as model drug, were prepared by direct compression. The release profiles were adequately fitted to two mathematical models, and presented near zero order kinetics. Fil: Prado, Héctor Juan. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales; Argentina.

The interactions between a cationic polymer, poly(2-dimethylamino)ethyl methacrylate (pDMAEMA), and negatively charged rhodamine-labeled 25-mer phosphodiester oligonucleotides (Rh-ONs) were studied by fluorescence fluctuation spectroscopy and other techniques. The composition of the pDMAEMA/Rh-ON complexes was investigated as a function of the charge ratio (+/-) by increasing the pDMAEMA concentration and keeping the Rh-ON concentration constant. We applied two different methods for analyzing the fluorescence fluctuation profiles of the pDMAEMA/Rh-ON complexes, which depended on their composition. First, we analyzed the data with the photon counting histogram (PCH) technique, which determines the molecular brightness and the concentration of fluorophores (Chen et al, 1999). A particular challenge for the data analysis is the occurrence of sudden fluorescence bursts in the fluorescence fluctuation profiles, which are linked to the appearance of multimolecular complexes (i. e. when several Rh-ONs were present in one complex). A quantitative interpretation of the analysis for the complexes remains challenging and is connected to the rarity of the fluorescent bursts, which do not provide sufficient data statistics. To specifically address the problem of the fluorescent bursts we employed a method described by Van Craenenbroeck et al. (1999). This method, applicable only when data were integrated over much longer time bins, allowed us to estimate the number of fluorescence bursts which could be considered as a relative measure of the amount of multimolecular complexes present. When monomolecular complexes were formed, i. e. at high values of the charge ratio, highly intense fluorescence peaks were not present and the interpretation of the PCH analysis was more straightforward. The molecular brightness of the species (epsilon), as revealed from PCH analysis, was greater than epsilon for the free Rh-ONs, indicating that the Rh-ONs were attached to pDMAEMA chains.