Search

Pre-trained language models (PLMs) have made remarkable progress in table-to-text generation tasks. However, the topological gap between tabular data and text and the lack of domain-specific knowledge make it difficult for PLMs to produce faithful text, especially in real-world applications with limited resources. In this paper, we mitigate the above challenges by introducing a novel augmentation method: Prompt-based Adapter (PA), which targets table-to-text generation under few-shot conditions. The core insight design of the PA is to inject prompt templates for augmenting domain-specific knowledge and table-related representations into the model for bridging the structural gap between tabular data and descriptions through adapters. Such prompt-based knowledge augmentation method brings at least two benefits: (1) enables us to fully use the large amounts of unlabelled domain-specific knowledge, which can alleviate the PLMs' inherent shortcomings of lacking domain knowledge; (2) allows us to design different types of tasks supporting the generative challenge. Extensive experiments and analyses are conducted on three open-domain few-shot NLG datasets: Humans, Books, and Songs. Compared to previous state-of-the-art approaches, our model achieves superior performance in terms of both fluency and accuracy as judged by human and automatic evaluations., arXiv admin note: substantial text overlap with arXiv:2302.04415

Recently, the world has witnessed the most severe pandemic (COVID-19) in this century. Studies on epidemic prediction and simulation have received increasing attention. However, the current methods suffer from three issues. First, most of the current studies focus on epidemic prediction, which can not provide adequate support for intervention policy making. Second, most of the current interventions are based on population groups rather than fine-grained individuals, which can not make the measures towards the infected people and may cause waste of medical resources. Third, current simulations are not efficient and flexible enough for large-scale complex systems. In this paper, we propose a new epidemic simulation framework called HMES to address the above three challenges. The proposed framework covers a full pipeline of epidemic simulation and enables comprehensive fine-grained control in a large scale. In addition, we conduct experiments on real COVID-19 data. HMES demonstrates more accurate modeling of disease transmission up to 300 million people and up to 3 times acceleration compared to the state-of-the-art methods., Comment: UIC-2022, code available at https://github.com/hygeng/humanflow

This paper proposes the fine-grained traffic prediction task (e.g. interval between data points is 1 minute), which is essential to traffic-related downstream applications. Under this setting, traffic flow is highly influenced by traffic signals and the correlation between traffic nodes is dynamic. As a result, the traffic data is non-smooth between nodes, and hard to utilize previous methods which focus on smooth traffic data. To address this problem, we propose Fine-grained Deep Traffic Inference, termed as FDTI. Specifically, we construct a fine-grained traffic graph based on traffic signals to model the inter-road relations. Then, a physically-interpretable dynamic mobility convolution module is proposed to capture vehicle moving dynamics controlled by the traffic signals. Furthermore, traffic flow conservation is introduced to accurately infer future volume. Extensive experiments demonstrate that our method achieves state-of-the-art performance and learned traffic dynamics with good properties. To the best of our knowledge, we are the first to conduct the city-level fine-grained traffic prediction., Comment: Accepted by ECML PKDD 2023 (ADS track)

Pre-trained language models (PLM) have achieved remarkable advancement in table-to-text generation tasks. However, the lack of labeled domain-specific knowledge and the topology gap between tabular data and text make it difficult for PLMs to yield faithful text. Low-resource generation likewise faces unique challenges in this domain. Inspired by how humans descript tabular data with prior knowledge, we suggest a new framework: PromptMize, which targets table-to-text generation under few-shot settings. The design of our framework consists of two aspects: a prompt planner and a knowledge adapter. The prompt planner aims to generate a prompt signal that provides instance guidance for PLMs to bridge the topology gap between tabular data and text. Moreover, the knowledge adapter memorizes domain-specific knowledge from the unlabelled corpus to supply essential information during generation. Extensive experiments and analyses are investigated on three open domain few-shot NLG datasets: human, song, and book. Compared with previous state-of-the-art approaches, our model achieves remarkable performance in generating quality as judged by human and automatic evaluations., Comment: not good enough we changed the contend and rename the article with a new submission

Traffic simulation provides interactive data for the optimization of traffic control policies. However, existing traffic simulators are limited by their lack of scalability and shortage in input data, which prevents them from generating interactive data from traffic simulation in the scenarios of real large-scale city road networks. In this paper, we present \textbf{C}ity \textbf{B}rain \textbf{Lab}, a toolkit for scalable traffic simulation. CBLab consists of three components: CBEngine, CBData, and CBScenario. CBEngine is a highly efficient simulator supporting large-scale traffic simulation. CBData includes a traffic dataset with road network data of 100 cities all around the world. We also develop a pipeline to conduct a one-click transformation from raw road networks to input data of our traffic simulation. Combining CBEngine and CBData allows researchers to run scalable traffic simulations in the road network of real large-scale cities. Based on that, CBScenario implements an interactive environment and a benchmark for two scenarios of traffic control policies respectively, with which traffic control policies adaptable for large-scale urban traffic can be trained and tuned. To the best of our knowledge, CBLab is the first infrastructure supporting traffic control policy optimization in large-scale urban scenarios. CBLab has supported the City Brain Challenge @ KDD CUP 2021. The project is available on GitHub:~\url{https://github.com/CityBrainLab/CityBrainLab.git}., Accepted by KDD2023 (Applied Data Science Track)

Traffic simulators act as an essential component in the operating and planning of transportation systems. Conventional traffic simulators usually employ a calibrated physical car-following model to describe vehicles' behaviors and their interactions with traffic environment. However, there is no universal physical model that can accurately predict the pattern of vehicle's behaviors in different situations. A fixed physical model tends to be less effective in a complicated environment given the non-stationary nature of traffic dynamics. In this paper, we formulate traffic simulation as an inverse reinforcement learning problem, and propose a parameter sharing adversarial inverse reinforcement learning model for dynamics-robust simulation learning. Our proposed model is able to imitate a vehicle's trajectories in the real world while simultaneously recovering the reward function that reveals the vehicle's true objective which is invariant to different dynamics. Extensive experiments on synthetic and real-world datasets show the superior performance of our approach compared to state-of-the-art methods and its robustness to variant dynamics of traffic., Accepted for publication by IJCAI 2021

Simulation of the real-world traffic can be used to help validate the transportation policies. A good simulator means the simulated traffic is similar to real-world traffic, which often requires dense traffic trajectories (i.e., with a high sampling rate) to cover dynamic situations in the real world. However, in most cases, the real-world trajectories are sparse, which makes simulation challenging. In this paper, we present a novel framework ImInGAIL to address the problem of learning to simulate the driving behavior from sparse real-world data. The proposed architecture incorporates data interpolation with the behavior learning process of imitation learning. To the best of our knowledge, we are the first to tackle the data sparsity issue for behavior learning problems. We investigate our framework on both synthetic and real-world trajectory datasets of driving vehicles, showing that our method outperforms various baselines and state-of-the-art methods., Comment: Accepted by ECML-PKDD 2020, Best Applied Data Science Paper. 16 pages, 6 figures

The heavy traffic and related issues have always been concerns for modern cities. With the help of deep learning and reinforcement learning, people have proposed various policies to solve these traffic-related problems, such as smart traffic signal control systems and taxi dispatching systems. People usually validate these policies in a city simulator, since directly applying them in the real city introduces real cost. However, these policies validated in the city simulator may fail in the real city if the simulator is significantly different from the real world. To tackle this problem, we need to build a real-like traffic simulation system. Therefore, in this paper, we propose to learn the human routing model, which is one of the most essential part in the traffic simulator. This problem has two major challenges. First, human routing decisions are determined by multiple factors, besides the common time and distance factor. Second, current historical routes data usually covers just a small portion of vehicles, due to privacy and device availability issues. To address these problems, we propose a theory-guided residual network model, where the theoretical part can emphasize the general principles for human routing decisions (e.g., fastest route), and the residual part can capture drivable condition preferences (e.g., local road or highway). Since the theoretical part is composed of traditional shortest path algorithms that do not need data to train, our residual network can learn human routing models from limited data. We have conducted extensive experiments on multiple real-world datasets to show the superior performance of our model, especially with small data. Besides, we have also illustrated why our model is better at recovering real routes through case studies.

Deep neural networks (DNNs) have been broadly adopted in health risk prediction to provide healthcare diagnoses and treatments. To evaluate their robustness, existing research conducts adversarial attacks in the white/gray-box setting where model parameters are accessible. However, a more realistic black-box adversarial attack is ignored even though most real-world models are trained with private data and released as black-box services on the cloud. To fill this gap, we propose the first black-box adversarial attack method against health risk prediction models named MedAttacker to investigate their vulnerability. MedAttacker addresses the challenges brought by EHR data via two steps: hierarchical position selection which selects the attacked positions in a reinforcement learning (RL) framework and substitute selection which identifies substitute with a score-based principle. Particularly, by considering the temporal context inside EHRs, it initializes its RL position selection policy by using the contribution score of each visit and the saliency score of each code, which can be well integrated with the deterministic substitute selection process decided by the score changes. In experiments, MedAttacker consistently achieves the highest average success rate and even outperforms a recent white-box EHR adversarial attack technique in certain cases when attacking three advanced health risk prediction models in the black-box setting across multiple real-world datasets. In addition, based on the experiment results we include a discussion on defending EHR adversarial attacks.

In the face of growing needs for water and energy, a fundamental understanding of the environmental impacts of human activities becomes critical for managing water and energy resources, remedying water pollution, and making regulatory policy wisely. Among activities that impact the environment, oil and gas production, wastewater transport, and urbanization are included. In addition to the occurrence of anthropogenic contamination, the presence of some contaminants (e.g., methane, salt, and sulfate) of natural origin is not uncommon. Therefore, scientists sometimes find it difficult to identify the sources of contaminants in the coupled natural and human systems. In this paper, we propose a technique to simultaneously conduct source detection and prediction, which outperforms other approaches in the interdisciplinary case study of the identification of potential groundwater contamination within a region of high-density shale gas development., 8 pages, 4 figures, 1 table

Traffic signal control is an important and challenging real-world problem, which aims to minimize the travel time of vehicles by coordinating their movements at the road intersections. Current traffic signal control systems in use still rely heavily on oversimplified information and rule-based methods, although we now have richer data, more computing power and advanced methods to drive the development of intelligent transportation. With the growing interest in intelligent transportation using machine learning methods like reinforcement learning, this survey covers the widely acknowledged transportation approaches and a comprehensive list of recent literature on reinforcement for traffic signal control. We hope this survey can foster interdisciplinary research on this important topic., 32 pages

With the increasing availability of traffic data and advance of deep reinforcement learning techniques, there is an emerging trend of employing reinforcement learning (RL) for traffic signal control. A key question for applying RL to traffic signal control is how to define the reward and state. The ultimate objective in traffic signal control is to minimize the travel time, which is difficult to reach directly. Hence, existing studies often define reward as an ad-hoc weighted linear combination of several traffic measures. However, there is no guarantee that the travel time will be optimized with the reward. In addition, recent RL approaches use more complicated state (e.g., image) in order to describe the full traffic situation. However, none of the existing studies has discussed whether such a complex state representation is necessary. This extra complexity may lead to significantly slower learning process but may not necessarily bring significant performance gain. In this paper, we propose to re-examine the RL approaches through the lens of classic transportation theory. We ask the following questions: (1) How should we design the reward so that one can guarantee to minimize the travel time? (2) How to design a state representation which is concise yet sufficient to obtain the optimal solution? Our proposed method LIT is theoretically supported by the classic traffic signal control methods in transportation field. LIT has a very simple state and reward design, thus can serve as a building block for future RL approaches to traffic signal control. Extensive experiments on both synthetic and real datasets show that our method significantly outperforms the state-of-the-art traffic signal control methods.