Search

Our study elucidates significant differences in RM-associated host-microbe interactions between LUAD and LUSC. Besides, the microbes in tumor tissue could be used to predict the RM risk of LUSC, and the predicted risk score is associated with patients’ survival.

A 3-column osteotomy is sometimes challenging in congenital kyphosis (CK) with many anterior unsegmented vertebrae (AUVs). This study compared surgical outcomes of single-level 3-column osteotomy and associated complications in CK with increasing number of AUVs.We retrospectively reviewed 25 consecutive patients with AUVs in CK who underwent surgery at a mean age of 16.2 ± 10.3 years. Patients were stratified into 2 groups according to the number of AUVs: 3 AUVs and ≥4 AUVs. Osteotomy types, surgical outcomes, and related complications were analyzed and compared between groups.The 3 AUVs group comprised 13 patients, and the ≥4 AUVs group comprised 12 patients. Pedicle subtraction osteotomy, grade 4 osteotomy, vertebral column resection, and vertebral column decancellation accounted for 15.4%, 38.5%, 46.1%, and 0% of procedures in the 3 AUVs group and 8.3%, 0%, 83.3%, and 8.3% of procedures in the ≥4 AUVs group. Preoperative focal kyphosis, which was significantly higher in the ≥4 AUVs group (82.9° ± 28° vs. 59.7° ± 9.4°, P = 0.010), was corrected in both groups postoperatively. The ≥4 AUVs group had significantly higher remaining kyphosis (33.6° ± 13.4° vs. 15.1° ± 9.1°, P0.001) with a significantly lower correction rate (61.2% ± 13.6% vs. 75.0% ± 15.6%, P = 0.001). The complication rate, mainly involving vertebral subluxation and proximal junctional kyphosis, was significantly higher in the ≥4 AUVs group than the 3 AUVs group (8/12 vs. 1/13, P = 0.004).Posterior single-level 3-column osteotomy can achieve satisfactory kyphosis correction in CK with 3 AUVs. Decreasing kyphosis correction and increasing surgery-related complications are prone to develop when treating CK with ≥4 AUVs.

Heavy metal pollution at tourist attractions centers has caused widespread concern. In this study, the concentration of seven heavy metals (Pb, Cu, Cr, Zn, Ni, As, and Mn) in the surface soil of the Lushan scenic area was measured, and their pollution characteristics were assessed using the Nemerow comprehensive pollution index and geo-accumulation index; further, the human non-carcinogenic and carcinogenic risks were evaluated by the U.S. Environmental Protection Agency health risk assessment model. Correlation analysis, cluster analysis, and a positive matrix factorisation model were used to analyse the heavy metal sources. The results indicated that the heavy metal concentrations did not exceed the pollution threshold levels. The hazard quotients for the six heavy metals (Pb, Cu, Cr, Zn, Ni, and As) are below the threshold for non-carcinogenic health risk, whereas the carcinogenic health risk in the region is at an “acceptable” level; however, because of the high contribution of As, the carcinogenic health risks to residents of this area require continuous monitoring. Analysis revealed six sources of the pollutants: soil parent material, altitude, surface accumulation of organic matter, industrial dustfall, local human activities (life and agriculture), and tourism. These findings provide a scientific basis for developing appropriate strategies for a sustainable development of the scenic area.

Background Rib head dislocation (RHD) in dystrophic scoliosis of type 1 neurofibromatosis (DS-NF1) is a unique disorder caused by skeletal dystrophy and scoliotic instability. No particular surgical manipulation is mentioned in the literature to instruct the spine surgeons to effectively obtain more migration of the dislocated rib head without resection. The present study aimed to investigate the effectiveness of screw/hook insertion at vertebrae with RHDs on the retraction of penetrated rib head from spinal canal. Methods 37 neurologically intact patients with DS-NF1 and concomitant 53 RHDs undergoing scoliosis surgery without rib head excision were retrospectively reviewed. We used pre and postoperative whole-spine radiographs to determine the Cobb angle and the vertebral translation (VT), and the CT scans to evaluate the intraspinal rib length (IRL) and rib-vertebral angle (RVA). The dislocated ribs were assigned into two groups according to the presence of screw/hook insertion at vertebrae with RHD: screw/hook group and non-screw/hook group. Results 37 dislocated ribs with screws/hooks insertion at corresponding vertebrae were assigned into the screw/hook group and the remaining 16 dislocated ribs consisted of the non-screw/hook group. In the screw/hook group, the correction rates of Cobb angle and VT were significantly higher than the non-screw/hook group after surgery (58.7 ± 16.0% vs. 30.9 ± 12.4%, p = 0.003; 61.8 ± 18.8% vs. 35.1 ± 16.6%, p = 0.001; respectively). Similarly, more correction rates of IRL and RVA were found in the screw/hook group than the non-screw/hook group (63.1 ± 31.3% vs. 30.1 ± 20.7%, p = 0.008; 17.6 ± 9.7% vs. 7.2 ± 3.6%, p = 0.006; respectively). Multiple linear regression analysis revealed that the correction rates of Cobb angle, VT and RVA contributed significantly to correction of IRL (β = 0.389, 0.939 and 1.869, respectively; p = 0.019, 0.001 and 0.002, respectively). Conclusion Screw/hook insertion at dystrophic vertebrae with RHDs contributed significantly to the degree of retraction of penetrated rib head from spinal canal. This effectiveness is mediated by more corrections of VT and RVA.

To comprehensively present the clinical characteristics and treatment strategies in patients with scoliosis secondary to ganglioneuroma (S-GN).Six patients with S-GN treated surgically at a median age of 12 years were retrospectively reviewed and the median follow-up period was 6 years (4-14 years). The radiological features of GN and the associated scoliosis were evaluated. The surgical strategies and the corresponding outcomes were investigated.All patients had a delayed diagnosis age of GN than scoliosis (12 vs. 9 years). GN was located at the posterior mediastinum in four patients (66.7%) and at retroperitoneum in two, respectively. Tumor occupancies were frequently detected on the X-ray films for four patients (66.7%), being uniformly on the convexity of the main curve. All patients complained of rapid progressive deformities during the growth period. Five patients (83.3%) received total tumor resections, one accepted partial resection. Deformity correction was implemented for all patients with an average rate of 66.4% on the main curve. No recurrence of the GN was detected for all totally tumor-resected patients at the latest follow-up.S-GN is often misdiagnosed clinically. Paravertebral mass neighboring the apex of scoliosis can be meticulously detected from the X-ray films. Total tumor resection should be aggressively performed if possible. The deformity correction could be satisfactorily obtained and the risk of recurrence of the GN was relatively low.

Background. Rib head dislocation (RHD) in dystrophic scoliosis of type 1 neurofibromatosis (DS-NF1) is a unique disorder caused by skeletal dystrophy and scoliotic instability. No particular surgical manipulation is mentioned in the literature to instruct the spine surgeons to effectively obtain more migration of the dislocated rib head without resection. The present study aimed to investigate the effectiveness of screw/hook insertion at vertebrae with RHDs on the retraction of penetrated rib head from spinal canal.Methods. 37 neurologically intact patients with DS-NF1 and concomitant 53 RHDs undergoing scoliosis surgery without rib head excision were retrospectively reviewed. We used pre and postoperative whole-spine radiographs to determine the Cobb angle and the vertebral translation (VT), and the CT scans to evaluate the intraspinal rib length (IRL) and rib-vertebral angle (RVA). The dislocated ribs were stratified into two groups according to the presence of screw/hook insertion at vertebrae with RHD: screw/hook group and non-screw/hook group. Results. 37 dislocated ribs with screws/hooks insertion at corresponding vertebrae were assigned into the screw/hook group and the remaining 16 dislocated ribs consisted of the non-screw/hook group. In the screw/hook group, the correction rates of Cobb angle and VT were significantly higher than the non-screw/hook group after surgery (58.7±16.0% vs. 30.9±12.4%, p=0.003; 61.8±18.8% vs. 35.1±16.6%, p=0.001; respectively). Similarly, more correction rates of IRL and RVA were found in the screw/hook group than the non-screw/hook group (63.1±31.3% vs. 30.1±20.7%, p=0.008; 17.6±9.7% vs. 7.2±3.6%, p=0.006; respectively). Multiple linear regression analysis revealed that the correction rates of Cobb angle, VT and RVA contributed significantly to correction of IRL (β=0.389, 0.939 and 1.869, respectively; p=0.019, 0.001 and 0.002, respectively).Conclusion. Screw/hook insertion at dystrophic vertebrae with RHDs contributed significantly to the degree of retraction of penetrated rib head from spinal canal. This effectiveness is mediated by more corrections of VT and RVA.

Background. There was a paucity of valid information on how to discriminate between different patterns of convex coronal imbalance (CCI>3cm) in dystrophic scoliosis secondary to Type I neurofibromatosis (DS-NF1), while aggravated postoperative CCI occurred regularly with the causes being insufficiently investigated. We aimed to develop a new classification of CCI in DS-NF1, and to optimize the coronal rebalancing strategies.Methods. NF1-related scoliosis database was reviewed and different types of CCI were identified, and the outcomes of coronal rebalance were analyzed. Results. Two main CCI patterns were defined: thoracic CCI (Type 1) and thoracolumbar/lumbar CCI (Type 2), and were further subtyped by the compensatory behavior of the upper hemi-curve (straight or curved morphology). The incidence of immediate post-op CCI was 0.0% and 63.6% for Type1 and Type 2 groups, respectively. Mismatch of both translation and inclination correction between the upper and lower hemi-curve was significant in the post-op coronal imbalanced group (△Upper Arc Translation/△Lower Arc Translation: 109.6±60.0% vs. 31.8±34.4%, p=0.008; △Upper Arc Inclination/△Lower Arc Inclination: 89.8±36.6% vs. 33.5±37.3%, p=0.012). Multiple linear regression analysis revealed that △UAT/△LAT significantly correlated with the correction of coronal balance distance (β=-21.567; p=0.018). A surgical rebalancing algorithm was proposed to treat each subtype.Conclusion. Thoracolumbar/lumbar CCI in dystrophic scoliosis was prone to suffer high risk of persistent post-op CCI. Satisfying coronal rebalance should rely on maximal translational correction of lower hemi-curve, while the upper hemi-curve played the role of fine-tuning for coronal realignment rather than radical Cobb correction, straight morphology in particular.

Background There was a paucity of valid information on how to rectify the convex coronal imbalance effectively in dystrophic scoliosis secondary to Type I neurofibromatosis (DS-NF1), while postoperative inadvertent aggravation of CCI occurred regularly resulting in poor patient satisfaction. We aimed to identify the risk factors for persistent postoperative CCI in DS-NF1, and to optimize the coronal rebalancing strategies based on the lessons learned from this rare case series. Methods NF1-related scoliosis database was reviewed and those with significant CCI (> 3 cm) were identified, sorted and the outcomes of surgical coronal rebalance were analyzed to identify the factors being responsible for failure of CCI correction. Results CCI with dystrophic thoracolumbar/lumbar apex was prone to remain uncorrected (7 failure cases in 11) when compared to those with thoracic apex (0 failure cases in 4) (63.6% vs. 0.0%, p = 0.077). Further comparison between those with and without post-op CCI showed a higher correction of main curve Cobb angle (65.9 ± 9.1% vs. 51.5 ± 37.3%, p = 0.040), more tilted instrumentation (10.3 ± 3.6° vs. 3.2 ± 3.1°, p = 0.001) and reverse tilt and translation of upper instrumented vertebra (UIV) to convex side (8.0 ± 2.3° vs. -3.4 ± 5.9°, p p = 0.001) in the uncorrected imbalanced group. Multiple linear regression analysis revealed that △UIV translation (pre- to post-operation) (β = 0.832; p = 0.030) was significantly correlated with the correction of CBD. Conclusion Thoracolumbar/lumbar CCI in dystrophic scoliosis was prone to suffer high risk of persistent post-op CCI. Satisfying coronal rebalance should avoid UIV tilt and translation to the convex side, tilted morphology of instrumentation and over correction maneuvers for main curve, the upper hemi-curve region in particular.

We investigated the contamination levels of nine heavy metals (Mn, Pb, V, Cr, Co, Ni, Cu, Zn, and As) in 153 surface sediment samples collected along five tidal flats on the North Jiangsu coast, China. The spatial distributions of most heavy metals gradually decreased from the northern Sheyang region to the southern Jianggang region, while slightly increasing in the Rudong region. Principal component analysis indicated that Co, Ni, Cu, Zn, and As were mainly derived from the natural environment, V and Cr were mainly derived from human activities. Additionally, Mn and Pb influenced by both natural and human sources. The geo-accumulation index and the contamination factor indicated that heavy metal contamination in the sediments exhibited little to no pollution levels. The potential ecological risk index exhibiting low ecological risks. Meanwhile, the mean probable effect level quotient values indicating slight toxicity. Cr and Ni were the major contributors to toxicity.

Large amounts of organic carbon (OC) and inorganic carbon (IC) are stored in coastal sediments. These carbon compounds play an important role in coping with global climate change. In this study, the surface sediments of four tidal flat sections in northern Jiangsu were analysed for their OC and IC contents, as well as changes in the physical and chemical properties of the sediments (particle size, pH, salinity (SAL), and N, P, and S contents). A partial least squares regression (PLSR) was conducted to explore the factors affecting OC and IC variations. According to the results, the OC and IC contents exhibited increasing trends when moving from the seaward to landward parts of the sections. The OC variations were large and IC variations were small in all four sections and the vegetation coverage contributes to the carbon content of tidal flat sediments. The PLSR analysis indicates that the main factors influencing OC and IC contents in the tidal flat system were particle size (sand, silt, and clay) and N content, while SAL had the least influence on OC and IC contents. The IC and OC contents are positively coupled, which may indicate that the nearshore vegetation has a greater contribution to OC, affects the coastal hydrodynamic conditions, and enhances the retention of IC. Additionally, the transformation of OC to IC also positively contributed to the coupling of their contents.

Oncolytic viruses are an excellent platform for developing effective strategies in cancer immunotherapy. Several challenges remain in the use of viro-immunotherapy for cancer, such as the lack of costimulatory signals and negative regulation of immune checkpoints. In this study, we designed a novel adenovirus expressing a soluble fusion protein, programmed cell death protein 1 (PD-1)/CD137L, which contains the extracellular domains of PD-1 and CD137L at each terminus (Ad5-PC). Ad5-PC preserved the costimulatory activity of CD137L and facilitated the persistence of activated CD8(+) T cells. Ad5-PC induced strikingly increased antitumor activity in both ascitic and subcutaneous hepatocellular carcinoma (HCC) tumor models, with 70% and 60% long-term cure rates, respectively. The improved antitumor effect of Ad5-PC was attributed to the sustained high-level lymphocyte activation and interferon (IFN)-γ production in the tumor microenvironment, and was essentially dependent on CD8(+) T cells rather than natural killer (NK) cells. Moreover, Ad5-huPC-expressing human soluble PD-1/CD137L fusion protein was effective in suppressing tumor growth and improving survival in a humanized mouse model. We confirmed that Ad5-PC induced tumor-specific and systematic protection against tumor rechallenges at both in situ and distant sites. Thus, Ad5-PC harnesses several distinct functions to efficiently overcome several major hurdles of viro-immunotherapy.

In recent years, the role of cancer immunotherapy has become increasingly important compared to traditional cancer treatments, including surgery, chemotherapy and radiotherapy. Of note, the clinical successes of immune checkpoint blockade, such as PD-1 and CTLA-4, represent a landmark event in cancer immunotherapy development. Therefore, further exploration of how immune checkpoints are regulated in the tumor microenvironment will provide key insights into checkpoint blockade therapy. In this review, we discuss in details about the regulation of immune checkpoints mediated by immune cells, oncolytic viruses, epigenetics, and gut microbiota and mutual regulation by co-expressed checkpoints. Finally, predictions are made for future personalized cancer immunotherapy based on different checkpoint modulations.

Functionalization of biomaterials with specific functional groups is one of the most straightforward strategies to induce specific cell responses to biomaterials. In this study, thiol (SH) and amino (NH2) functional groups have been successfully modified on the surfaces of mesoporous bioactive glass (MBG) scaffolds to form thiol-functionalized MBG (SH-MBG) and amino-functionalized MBG (NH2-MBG) scaffolds by a post-grafting technique. The effects of the functional groups on the structure, physicochemical and biological properties of MBG scaffolds were systematically investigated. The results showed that the functionalization of MBG scaffolds did not change their structures, and the SH-MBG and NH2-MBG scaffolds still had hierarchical pore architecture (macropores of 300–500 μm and mesopores of 3.5–4 nm) and high porosity (84–86%), similar to the MBG scaffolds. Furthermore, the SH-MBG and NH2-MBG scaffolds possessed similar apatite mineralization ability and biocompatibility compared to the MBG scaffolds. Importantly, the SH-MBG and NH2-MBG scaffolds significantly stimulated adhesion, proliferation and differentiation of human bone marrow-derived mesenchymal stem cells (hBMSCs). Therefore, functionalization of MBG scaffolds with SH and NH2 functional groups would be a viable way to tailor the surface characteristics for stimulating biological responses of hBMSCs, and the functionalized MBG scaffolds would be a promising bioactive material for bone tissue engineering applications.

In the big data era, there many application scenarios urgently need efficient distributed multidimensional indexing approach to accelerate the data analytics. To address this issue, in this paper, we propose ABR-Tree, a multidimensional distributed indexing approach. ABR-Tree consist of two components, the global append-efficient Bi¾ź+i¾ź-Tree, and the local R*-Tree. Both of them are layered over the cloud database as the index and data store, which not only make ABR-Tree is easy to implement and inherently become a distributed cloud index, but also enable ABR-Tree can sustain high throughput workload and large data volumes, meanwhile, ensuring fault-tolerance, and high availability. We conducted extensive experiments over 1i¾źTB real data set to evaluate its efficiency of processing multidimensional range queries, the results show that it is significantly fast than the existing representative distributed multidimensional cloud index method.

Block-based matrix multiplication plays an important role in statics computing. It is hard to make large scale matrix multiplication in data statistics and analysis. A flexible parallel runtime for large scale block-based matrix is proposed in this paper. With MapReduce framework, four parallel matrix multiplication methods have been discussed. Three methods use the HDFS to be the storage and one method utilizes the Cloud storage to be the storage. The parallel runtime will determine to use the appropriate block-based matrix multiplication. Experiments have been made to test the proposed flexible parallel runtime with large scale randomly generated data and public matrix collection. The results have shown that the proposed runtime has a good effect to select the best matrix multiplication strategy.