Search

Simple and accurate dispersion measurement of GaN microresonators with a fiber ring: supplemental document

Supplemental Materials

A novel thin-film LiNbO3 (TFLN) electro-optic modulator is proposed and demonstrated. LiNbO3-silica hybrid waveguide is adopted to maintain low optical loss for an electrode spacing as narrow as 3 {\mu}m, resulting in a record low half-wave-voltage length product of only 1.7 V*cm. Capacitively loaded traveling-wave electrodes (CL-TWEs) are employed to reduce the microwave loss, while quartz substrate is used in place of silicon substrate to achieve velocity matching. The fabricated TFLN modulator with a 5-mm-long modulation region exhibits a half-wave-voltage of 3.4 V and merely 1.3 dB roll-off in electro-optic response up to 67 GHz, and a 3-dB modulation bandwidth over 110 GHz is predicted.

Optical frequency comb generation in microresonators has attracted significant attention over the past decade, as it offers the promising potential for chip-scale optical frequency synthesis, optical clocks and precise optical spectroscopy. However, accessing temporal dissipative Kerr soliton (DKSs) is known to be severely hampered by thermal effects. Furthermore, due to the degeneracy of soliton existence range with respect to soliton number, deterministically accessing single soliton state is another challenge. Here, we demonstrate stable and deterministic single soliton generation in AlN-on-sapphire platform via auxiliary laser pumping scheme without the requirement of fast control of the pump power and detuning. Moreover, we reveal the underlying physics of soliton switching in a dual-pumped microcomb, which is fully described by the Lugiato - Lefever equation. The switching process is attributed to cross-phase modulation (XPM) induced degeneracy lifting of the soliton existence range, corresponding to an effective negative thermo-optic effect., Comment: 5 pages, 4 figures

A simple and effective approach to semiconductor laser linewidth narrowing via mutual injection locking is proposed and demonstrated in both short and long delay regimes. A theoretical analysis is presented to investigate the linewidth behavior of semiconductor lasers under mutual injection locking. Experimental demonstrations in short and long delay regimes are implemented by integrated devices and a fiber link system, respectively. Locking condition and dependence of laser linewidth on coupling parameters in both regimes are studied, confirming mutual injection locking as a practical method for linewidth narrowing. For the short-delayed integrated lasers, a linewidth narrowing factor of 13 is demonstrated and sub-MHz linewidth is achieved, while for the long-delayed lasers coupled by fiber link, the intrinsic linewidth is reduced to sub-100 Hz.

Semiconductor lasers capable of generating a vortex beam with a specific orbital angular momentum (OAM) order are highly attractive for applications ranging from nanoparticle manipulation, imaging and microscopy to fibre and quantum communications. In this work, an electrically pumped OAM laser operating at telecom wavelengths is fabricated by monolithically integrating an optical vortex emitter with a distributed feedback (DFB) laser on the same InGaAsP/InP epitaxial wafer. A single-step dry etching process is adopted to complete the OAM emitter, equipped with specially designed top gratings. The vortex beam emitted by the integrated laser is captured, and its OAM mode purity characterized. The electrically pumped OAM laser eliminates the external laser required by silicon- or silicon-on-insulator (SOI)-based OAM emitters, thus demonstrating great potential for applications in communication systems and quantum domain., 9 pages, 5 figures

Device characterization, dispersion simulation, and spontaneous AlN Raman spectroscopy

Device characterization, dispersion simulation, and spontaneous AlN Raman spectroscopy

A novel linewidth narrowing scheme based on mutual injection locking is proposed and experimentally confirmed. Narrowing factor of 2∼4 is demonstrated for monolithic DFB lasers, together with enhanced output power and suppressed relative intensity noise.

We propose a novel approach to laser frequency noise characterization by delayed self-heterodyne. Compared with the traditional treatment, our method applies to both long and short delay, corresponding to uncorrelated and correlated self-heterodyne. In the case of long delay, it overcomes the influence of 1/f noise on the intrinsic linewidth extraction from a broadened spectrum, and the results are more accurate than Voigt profile fitting. For short delayed correlated heterodyne, it eliminates artifact peaks at multiples of the reciprocal of delay time introduced by transferring measured RF phase noise to laser phase noise, thus extending the measurement range. In addition, it calibrates the frequency noise overestimation caused by a finite noise floor. This method remains valid when the delay and the coherence time are comparable. Experimental results are presented to demonstrate the effectiveness of the proposed approach in characterizing lasers with intrinsic linewidth ranging from sub-100 Hz to megahertz.

V-pit-defects in GaN-based light-emitting diodes induced by dislocations are considered beneficial to electroluminescence because they relax the strain in InGaN quantum wells and also enhance the hole lateral injection through sidewall of V-pits. In this paper, regularly arranged V-pits are formed on c-plane GaN grown by metal organic vapor phase epitaxy on conventional c-plane cone-patterned sapphire substrates. The size of V-pits and area of flat GaN can be adjusted by changing growth temperature. Five pairs of InGaN/GaN multi-quantumwell and also a light-emitting diode structure are grown on this V-pit-shaped GaN. Two peaks around 410 nm and 450 nm appearing in both photoluminescence and cathodeluminescence spectra are from the semipolar InGaN/GaN multi-quantum-well on sidewalls of V-pits and cplane InGaN/GaN multi-quantum-well, respectively. In addition, dense bright spots can be observed on the surface of light-emitting diode when it works under small injection current, which are believed owing to the enhanced hole injection around V-pits.

Efficiency droop effect under high injection in GaN-based light emitting diodes (LEDs) strongly depends on wavelength, which is still not well understood. In this paper, through differential carrier lifetime measurements on commercialized near-UV, blue, and green LEDs, their different efficiency droop behaviors are attributed to different carrier lifetimes, which are prolonged as wavelength increases. This relationship between carrier lifetime and indium composition of InGaN quantum well is believed owing to the polarization-induced quantum confinement Stark effect. Long carrier lifetime not only increases the probability of carrier leakage, but also results in high carrier concentration in quantum well. In other words, under the same current density, the carrier concentration in active region in near-UV LED is the lowest while that in green one is the highest. If considering the efficiency droop depending on carrier concentration, the behaviors of LEDs with different wavelengths do not show any abnormality. The reason why the efficiency droop becomes more serious under lower temperature can be also explained by this model as well. Based on this result, the possible solutions to conquer efficiency droop are discussed. It seems that decreasing the carrier lifetime is a fundamental approach to solve the problem.

We report the first investigation on continuous-wave Raman lasing in high-quality-factor aluminum nitride (AlN) microring resonators. Although wurtzite AlN is known to exhibit six Raman-active phonons, single-mode Raman lasing with low threshold and high slope efficiency is demonstrated. Selective excitation of A$_1^\mathrm{TO}$ and E$_2^\mathrm{high}$ phonons with Raman shifts of $\sim$612 and 660 cm$^{-1}$ is observed by adjusting the polarization of the pump light. A theoretical analysis of Raman scattering efficiency within ${c}$-plane (0001) of AlN is carried out to help account for the observed lasing behavior. Bidirectional lasing is experimentally confirmed as a result of symmetric Raman gain in micro-scale waveguides. Furthermore, second-order Raman lasing with unparalleled output power of $\sim$11.3 mW is obtained, which offers the capability to yield higher order Raman lasers for mid-infrared applications., Comment: 11 pages, 12 figures, 20 equations

Development of chip-scale optical frequency comb with the coverage from ultra-violet (UV) to mid-infrared (MIR) wavelength is of great significance. To expand the comb spectrum into the challenging UV region, a material platform with high UV transparency is crucial. In this paper, crystalline aluminum nitride (AlN)-onsapphire film is demonstrated for efficient Kerr frequency comb generation. Near-infrared (NIR) comb with nearly octave-spanning coverage and low parametric threshold is achieved in continuous-wave pumped high-quality-factor AlN microring resonators. The competition between stimulated Raman scattering (SRS) and hyperparametric oscillation is investigated, along with broadband comb generation via Raman-assisted four-wave mixing (FWM). Thanks to its wide bandgap, excellent crystalline quality as well as intrinsic quadratic and cubic susceptibilities, AlN-on-sapphire platform should be appealing for integrated nonlinear optics from MIR to UV region., Comment: 10 pages and 8 figures