Search

In its long-duration observation phase, the PLATO satellite will observe two non-overlapping fields for a total of 4 yr. The exact duration of each pointing will be determined 2 yr before launch. Previous estimates of PLATO's yield of Earth-sized planets in the habitable zones (HZs) around solar-type stars ranged between 6 and 280. We use the PLATO Solar-like Light curve Simulator (PSLS) to simulate light curves with transiting planets around bright (m_V > 11) Sun-like stars at a cadence of 25 s, roughly representative of the >15,000 targets in PLATO's high-priority P1 sample (mostly F5-K7 dwarfs and sub-dwarfs). Our study includes light curves generated from synchronous observations of 6, 12, 18, and 24 of PLATO's 12 cm aperture cameras over both 2 yr and 3 yr of continuous observations. Automated detrending is done with the Wotan software and post-detrending transit detection is performed with the Transit Least Squares (TLS) algorithm. We scale the true positive rates (TPRs) with the expected number of stars in the P1 sample and with modern estimates of the exoplanet occurrence rates and predict the detection of planets with 0.5 R_E, published in Astronomy & Astrophysics (2022), 19 pages, 17 Figures (16 col., 1 b/w), 2 Tables

Roghayeh Samadi,1 Zohreh Ghalavand,1 Reza Mirnejad,2 Bahram Nikmanesh,3 Gita Eslami1 1Department of Microbiology, School of Medicine, Shahid Beheshti University of Medical Sciences, Tehran, Iran; 2Molecular Biology Research Center, Systems Biology and Poisoning Institute, Baqiyatallah University of Medical Sciences, Tehran, Iran; 3Department of Medical Laboratory Sciences, School of Allied Medical Sciences, Tehran University of Medical Sciences, Tehran, IranCorrespondence: Gita EslamiDepartment of Microbiology, School of Medicine, Shahid Beheshti University of Medical Sciences, Tehran, IranTel +98-2123872556Email g_eslami@yahoo.comIntroduction: Methicillin-resistant Staphylococcus aureus(MRSA) causes high rates of mortality and a substantial burden to health systems worldwide. Here, we investigated the antimicrobial susceptibility and molecular characteristics of MRSA isolated from children referred to Children’s Medical Center in Tehran.Materials and methods: A total of 98 MRSA isolates were collected from children. Antimicrobial resistance patterns were determined using the disk diffusion and E-test methods. The presence of biofilm encoding genes and the pvl gene were determined by PCR. We used the microtiter plate method to assess the ability of biofilm formation. The MRSA isolates were further analyzed using PFGE and SCCmec typing.Results: Antibiotic susceptibility testing showed that the highest and the lowest antibiotic resistance percentage were related to erythromycin (62%) and minocycline (10%), respectively. Overall, 63% of MRSA isolates were biofilm producers. Resistance to two antibiotics such as erythromycin (72% vs 28%, P=0.01) and clindamycin (71% vs 29%, P=0.04) was higher among biofilm producers than non-biofilm producers. All strains had biofilm-forming genes and the prevalence of pvl gene was 41%. Most MRSA isolates belonged to SCCmec IVa (75%) and SCCmec III (18%). In PFGE technique, 5 common types and 2 single types were identified; Common type 1 with 37 isolates was dominant clone.Conclusion: We thus report preliminary data on the prevalence and distribution of MRSA genotypes in Tehran Children’s Hospital. These findings characterize the MRSA colonization dynamics in child patients in Iran and may aid the design of strategies to prevent MRSA infection and dissemination.Keywords: MRSA, biofilm formation, antibiotic resistance, SCCmec typing, PFGE

The PLATO mission (PLAnetary Transits and Oscillations of stars, hereafter abbreviated as PLATO) has been selected as part of ESA’s Cosmic Vision 2015–2025 program for the M3 mission launch foreseen in 2026. The main science goal of PLATO is to detect and characterize extrasolar planets, including terrestrial planets in the habitable zone (HZ) of their host stars. Characterization here means to derive accurate planetary radii, masses, and ages. In order to achieve these goals, it is mandatory to characterize the host stars. As transit search is an indirect detection and characterization method, the accurate knowledge of the host star parameters limits the accuracy of the derived planet parameters. PLATO will therefore monitor hundreds of thousands of stars for up to three years in order to fully characterize stars with asteroseismology and to detect transiting planets. The resulting large data set of stellar light curves provides an additional science return of the mission that reaches far beyond the exoplanet science case into stellar, Galactic, and extragalactic research. PLATO Payload features a multi-telescope configuration consisting of 26 cameras, of 12 cm pupil size aperture each, covering a field of view of about 2000 square degrees spread over 104 CCDs of 20 million pixels a piece. PLATO has strict noise requirements achieved through excellent optics transmission and quantum efficiency, low read-out noise, and stringent pointing requirements. In this talk we will review the drivers for PLATO Performance and present the most recent description of the status of noise budget and verification of main performance requirements (including field of view and pointing performance).

International audience; The application of the full potential of stellar seismology is made difficult by the improper modelling of the upper-most layers of solar-like stars and their influence on the modelled frequencies. Our knowledge of these so-called ‘surface effects’ has improved thanks to the use of 3D hydrodynamical simulations, however, the calculation of eigenfrequencies relies on empirical models for the description of the Lagrangian perturbation of turbulent pressure, namely: the reduced-Γ1 model (RGM) and the gas-Γ1 model (GGM). Starting from the fully compressible turbulence equations, we derived both the GGM and RGM models by using a closure to model the flux of turbulent kinetic energy. We find that both models originate from two terms: the source of turbulent pressure due to compression produced by the oscillations and the divergence of the flux of turbulent pressure. We also demonstrate that they are both compatible with the adiabatic approximation and, additionally, that they imply a number of questionable assumptions, mainly with respect to mode physics. Among other hypotheses, it is necessary to neglect the Lagrangian perturbation of the dissipation of turbulent kinetic energy into heat and the Lagrangian perturbation of buoyancy work.

The use of the full potential of stellar seismology is made difficult by the improper modeling of the upper-most layers of solar-like stars and their influence on the modeled frequencies. Our knowledge on these \emph{surface effects} has improved thanks to the use of 3D hydrodynamical simulations but the calculation of eigenfrequencies relies on empirical models for the description of the Lagrangian perturbation of turbulent pressure: the reduced-$��_1$ model (RGM) and the gas-$��_1$ model (GGM). Starting from the fully compressible turbulence equations, we derive both the GGM and RGM models using a closure to model the flux of turbulent kinetic energy. It is found that both models originate from two terms: the source of turbulent pressure due to compression produced by the oscillations and the divergence of the flux of turbulent pressure. It is also demonstrated that they are both compatible with the adiabatic approximation but also imply a number of questionable assumptions mainly regarding mode physics. Among others hypothesis, one has to neglect the Lagrangian perturbation of the dissipation of turbulent kinetic energy into heat and the Lagrangian perturbation of buoyancy work., 7 pages, 1 figure. Accepted as a Letter in Astronomy and Astrophysic

The CoRoT and Kepler missions provided a wealth of high-quality data for solar-like oscillations. To make the best of such data for seismic inferences, we need theoretical models with precise near-surface structure, which has significant influence on solar-like oscillation frequencies. The mixing-length parameter, $\alpha$, is a key factor for the near-surface structure. In the convection formulations used in evolution codes, the $\alpha$ is a free parameter that needs to be properly specified. We calibrated $\alpha$ values by matching entropy profiles of 1D envelope models with those of 3D CO$^5$BOLD models. For such calibration, previous works concentrated on the classical mixing-length theory (MLT). Here we also analyzed the full spectrum turbulence (FST) models. For the atmosphere part in the 1D models, we use the Eddington grey $T(\tau)$ relation and the one with the solar-calibrated Hopf-like function. For both the MLT and FST models with a mixing length $l=\alpha H_p$, calibrated $\alpha$ values increase with increasing $g$ or decreasing $T_{\rm eff}$. For the FST models, we also calibrated values of $\alpha^*$ defined as $l=r_{\rm top}-r+\alpha^*H_{p,{\rm top}}$. $\alpha^*$ is found to increase with $T_{\rm eff}$ and $g$. As for the correspondence to the 3D models, the solar Hopf-like function gives a photospheric-minimum entropy closer to a 3D model than the Eddington $T(\tau)$. The structure below the photosphere depends on the convection model. However, not a single convection model gives the best correspondence since the averaged 3D quantities are not necessarily related via an EOS. Although the FST models with $l=r_{\rm top}-r+\alpha^*H_{p,{\rm top}}$ are found to give the frequencies closest to the solar observed ones, a more appropriate treatment of the top part of the 1D convective envelope is necessary., Comment: 14 pages, 18 figures, accepted to Astronomy and Astrophysics

The high-quality data of solar-like oscillations by CoRoT and Kepler would enable us to precisely determine stellar characteristics. To make the best of such data, we need stellar models with precise near-surface structure, which significantly impacts on solar-like oscillation frequencies. The mixing length of convection models is a key factor for the near-surface structure. We calibrated values of the mixing length parameters of the classical mixing length theory (MLT) and the full spectrum turbulence (FST) model based on 3D CO5BOLD models. The parameter values are found to vary substantially with effective temperature and surface gravity. It implies that the calibrated parameter values should be implemented into evolution codes instead of fixing the parameter values during the evolution.

The CoRoT and Kepler missions provided a wealth of high-quality data for solar-like oscillations. To make the best of such data for seismic inferences, we need theoretical models with precise near-surface structure, which has significant influence on solar-like oscillation frequencies. The mixing-length parameter, $��$, is a key factor for the near-surface structure. In the convection formulations used in evolution codes, the $��$ is a free parameter that needs to be properly specified. We calibrated $��$ values by matching entropy profiles of 1D envelope models with those of 3D CO$^5$BOLD models. For such calibration, previous works concentrated on the classical mixing-length theory (MLT). Here we also analyzed the full spectrum turbulence (FST) models. For the atmosphere part in the 1D models, we use the Eddington grey $T(��)$ relation and the one with the solar-calibrated Hopf-like function. For both the MLT and FST models with a mixing length $l=��H_p$, calibrated $��$ values increase with increasing $g$ or decreasing $T_{\rm eff}$. For the FST models, we also calibrated values of $��^*$ defined as $l=r_{\rm top}-r+��^*H_{p,{\rm top}}$. $��^*$ is found to increase with $T_{\rm eff}$ and $g$. As for the correspondence to the 3D models, the solar Hopf-like function gives a photospheric-minimum entropy closer to a 3D model than the Eddington $T(��)$. The structure below the photosphere depends on the convection model. However, not a single convection model gives the best correspondence since the averaged 3D quantities are not necessarily related via an EOS. Although the FST models with $l=r_{\rm top}-r+��^*H_{p,{\rm top}}$ are found to give the frequencies closest to the solar observed ones, a more appropriate treatment of the top part of the 1D convective envelope is necessary., 14 pages, 18 figures, accepted to Astronomy and Astrophysics

Novel species of fungi described in this study include those from various countries as follows: Australia: Apiognomonia lasiopetali on Lasiopetalum sp., Blastacervulus eucalyptorum on Eucalyptus adesmophloia, Bul- lanockia australis (incl. Bullanockia gen. nov.) on Kingia australis, Caliciopsis eucalypti on Eucalyptus marginata, Celerioriella petrophiles on Petrophile teretifolia, Coleophoma xanthosiae on Xanthosia rotundifolia, Coniothyrium hakeae on Hakea sp., Diatrypella banksiae on Banksia formosa, Disculoides corymbiae on Corymbia calophylla, Elsinoe¿ eelemani on Melaleuca alternifolia, Elsinoe¿ eucalyptigena on Eucalyptus kingsmillii, Elsinoe¿ preissianae on Eucalyptus preissiana, Eucasphaeria rustici on Eucalyptus creta, Hyweljonesia queenslandica (incl. Hyweljonesia gen. nov.) on the cocoon of an unidentified microlepidoptera, Mycodiella eucalypti (incl. Mycodiella gen. nov.) on Eucalyptus diversicolor, Myrtapenidiella sporadicae on Eucalyptus sporadica, Neocrinula xanthorrhoeae (incl. Neocrinula gen. nov.) on Xanthorrhoea sp., Ophiocordyceps nooreniae on dead ant, Phaeosphaeriopsis agava- cearum on Agave sp., Phlogicylindrium mokarei on Eucalyptus sp., Phyllosticta acaciigena on Acacia suaveolens, Pleurophoma acaciae on Acacia glaucoptera, Pyrenochaeta hakeae on Hakea sp., Readeriella lehmannii on Eucalyptus lehmannii, Saccharata banksiae on Banksia grandis, Saccharata daviesiae on Daviesia pachyphylla, Saccharata eucalyptorum on Eucalyptus bigalerita, Saccharata hakeae on Hakea baxteri, Saccharata hakeicola on Hakea victoria, Saccharata lambertiae on Lambertia ericifolia, Saccharata petrophiles on Petrophile sp., Sac- charata petrophilicola on Petrophile fastigiata, Sphaerellopsis hakeae on Hakea sp., and Teichospora kingiae on Kingia australis. Brazil: Adautomilanezia caesalpiniae (incl. Adautomilanezia gen. nov.) on Caesalpina echinata, Arthrophiala arthrospora (incl. Arthrophiala gen. nov.) on Sagittaria montevidensis, Diaporthe caatingaensis (en- dophyte from Tacinga inamoena), Geastrum ishikawae on sandy soil, Geastrum pusillipilosum on soil, Gymnopus pygmaeus on dead leaves and sticks, Inonotus hymenonitens on decayed angiosperm trunk, Pyricularia urashimae on Urochloa brizantha, and Synnemellisia aurantia on Passiflora edulis. Chile: Tubulicrinis australis on Lophosoria quadripinnata. France: Cercophora squamulosa from submerged wood, and Scedosporium cereisporum from fluids of a wastewater treatment plant. Hawaii: Beltraniella acaciae, Dactylaria acaciae, Rhexodenticula acaciae, Rubikia evansii and Torula acaciae (all on Acacia koa). India: Lepidoderma echinosporum on dead semi-woody stems, and Rhodocybe rubrobrunnea from soil. Iran: Talaromyces kabodanensis from hypersaline soil. La Re¿union: Neocordana musarum from leaves of Musa sp. Malaysia: Anungitea eucalyptigena on Eucalyptus grandis × pellita, Camptomeriphila leucaenae (incl. Camptomeriphila gen. nov.) on Leucaena leucocephala, Castanediella communis on Eucalyptus pellita, Eucalyptostroma eucalypti (incl. Eucalyptostroma gen. nov.) on Eucalyptus pellita, Melanco- niella syzygii on Syzygium sp., Mycophilomyces periconiae (incl. Mycophilomyces gen. nov.) as hyperparasite on Periconia on leaves of Albizia falcataria, Synnemadiella eucalypti (incl. Synnemadiella gen. nov.) on Eucalyptus pellita, and Teichospora nephelii on Nephelium lappaceum....

International audience

One of the most important issues in the development of modern cities is the dispersed and horizontal expansion of cities. Due to a substantial effect of the form of a city on its stability, it is necessary to know study and understand its different dimensions and guide it to achieve sustainable development. Thus, infill development that is the simplest interpretation of urban endogenous development is considered as one of the urban smart growth strategies. Focusing on the vacant and abandoned lands in cities, infill development tries to load development on these lands. This study aimed to use infill development approach to achieve future development of Zone 8 of Tabriz and identify its potentials, in which several indicators have been used including quality of buildings, access and permeability, compressibility and granularity. In order to determine the final capacity of development and the effect of each indicator, the indicators were weighted by analytic network process (ANP) approach. The results of the study indicated that 38 hectares of the area under study had very high potential of development that accounted for 12.14%. Therefore, Zone 8 of Tabriz has much potential in the infill development. It could be said that half of the total area within the study area is prone to the internal development that requires formulating a suitable planning based on the principles of smart growth.

The space-borne missions have provided us with a wealth of high-quality observational data that allows for seismic inferences of stellar interiors. This requires the computation of precise and accurate theoretical frequencies, but imperfect modeling of the uppermost stellar layers introduces systematic errors. To overcome this problem, an empirical correction has been introduced by Kjeldsen et al. (2008, ApJ, 683, L175) and is now commonly used for seismic inferences. Nevertheless, we still lack a physical justification allowing for the quantification of the surface-effect corrections. We used a grid of these simulations computed with the CO$^5$BOLD code to model the outer layers of solar-like stars. Upper layers of the corresponding 1D standard models were then replaced by the layers obtained from the horizontally averaged 3D models. The frequency differences between these patched models and the 1D standard models were then calculated using the adiabatic approximation and allowed us to constrain the Kjeldsen et al. power law, as well as a Lorentzian formulation. We find that the surface effects on modal frequencies depend significantly on both the effective temperature and the surface gravity. We further provide the variation in the parameters related to the surface-effect corrections using their power law as well as a Lorentzian formulation. Scaling relations between these parameters and the elevation (related to the Mach number) is also provided. The Lorentzian formulation is shown to be more robust for the whole frequency spectrum, while the power law is not suitable for the frequency shifts in the frequency range above $\nu_{\rm max}$., Comment: 11 pages, 14 figures, 4 tables; accepted for publication in Astronomy & Astrophysics

Asteroseismology of evolved solar-like stars is experiencing a growing interest due to the wealth of observational data from space-borne instruments such as the \emph{CoRoT} and \emph{Kepler} spacecraft. In particular, the recent detection of mixed modes, which probe both the innermost and uppermost layers of stars, paves the way for inferring the internal structure of stars along their evolution through the subgiant and red giant phases. Mixed modes can also place stringent constraints on the physics of such stars and on their global properties (mass, age, etc...). Here, using two \emph{Kepler} stars (KIC 4351319 and KIC 6442183), we demonstrate that measurements of mixed mode characteristics allow us to estimate the mode inertias, providing a new and additional diagnostics on the mode trapping and subsequently on the internal structure of evolved stars. We however stress that the accuracy may be sensitive to non-adiabatic effects., Comment: ApJ Letter

International audience; Context. A large set of stars observed by CoRoT and Kepler shows clear evidence for the presence of a stellar background, which is interpreted to arise from surface convection, i.e., granulation. These observations show that the characteristic time-scale (τeff) and the root-mean-square (rms) brightness fluctuations (σ) associated with the granulation scale as a function of the peak frequency (νmax) of the solar-like oscillations. Aims. We aim at providing a theoretical background to the observed scaling relations based on a model developed in Paper I. Methods. We computed for each 3D model the theoretical power density spectrum (PDS) associated with the granulation as seen in disk-integrated intensity on the basis of the theoretical model published in Paper I. For each PDS we derived the associated characteristic time (τeff) and the rms brightness fluctuations (σ) and compared these theoretical values with the theoretical scaling relations derived from the theoretical model and the measurements made on a large set of Kepler targets. Results. We derive theoretical scaling relations for τeff and σ, which show the same dependence on νmax as the observed scaling relations. In addition, we show that these quantities also scale as a function of the turbulent Mach number (ℳa) estimated at the photosphere. The theoretical scaling relations for τeff and σ match the observations well on a global scale. Quantitatively, the remaining discrepancies with the observations are found to be much smaller than previous theoretical calculations made for red giants. Conclusions. Our modelling provides additional theoretical support for the observed variations of σ and τeff with νmax. It also highlights the important role of ℳa in controlling the properties of the stellar granulation. However, the observations made with Kepler on a wide variety of stars cannot confirm the dependence of our scaling relations on ℳa. Measurements of the granulation background and detections of solar-like oscillations in a statistically sufficient number of cool dwarf stars will be required for confirming the dependence of the theoretical scaling relations with ℳa.

International audience; Context. The CoRoT short asteroseismic runs give us the opportunity to observe a large variety of late-type stars through their solar-like oscillations. We report the observation and modeling of the F5V star HD 175272.Aims. Our aim is to define a method for extracting as much information as possible from a noisy oscillation spectrum. Methods. We followed a differential approach that consists of using a well-known star as a reference to characterize another star. We used classical tools such as the envelope autocorrelation function to derive the global seismic parameters of the star. We compared HD 175272 with HD 181420 through a linear approach, because they appear to be asteroseismic twins.Results. The comparison with the reference star enables us to substantially enhance the scientific output for HD 175272. First, we determined its global characteristics through a detailed seismic analysis of HD 181420. Second, with our differential approach, we measured the difference of mass, radius and age between HD 175272 and HD 181420.Conclusions. We have developed a general method able to derive asteroseismic constraints on a star even in case of low-quality data. This method can be applied to stars with interesting properties but low signal-to-noise ratio oscillation spectrum, such as stars hosting an exoplanet or members of a binary system.

Scaling relations between asteroseismic quantities and stellar parameters are essential tools for studying stellar structure and evolution. We will address two of them, namely, the relation between the large frequency separation ($\Delta \nu$) and the mean density ($\bar{\rho}$) as well as the relation between the frequency of the maximum in the power spectrum of solar-like oscillations ($\nu_{\rm max}$) and the cut-off frequency ($\nu_{\rm c}$). For the first relation, we will consider the possible sources of uncertainties and explore them with the help of a grid of stellar models. For the second one, we will show that the basic physical picture is understood and that departure from the observed relation arises from the complexity of non-adiabatic processes involving time-dependent treatment of convection. This will be further discussed on the basis of a set of 3D hydrodynamical simulation of surface convection., Comment: To appear in Proceedings of Fujihara Seminar 2012: "Progress in physics of the sun and stars: a new era in helio- and asteroseismology" H. Shibahashi, ed., ASP Conf. Ser

Contains fulltext : 111302.pdf (Author’s version preprint ) (Open Access) Contains fulltext : 111302.pdf (Publisher’s version ) (Closed access)

The aim of this work was to use a multi-approach technique to derive the most accurate values possible of the physical parameters of the ��Sct star HD174966. In addition, we searched for a periodic pattern in the frequency spectra with the goal of using it to determine the mean density of the star. First, we extracted the frequency content from the CoRoT light curve. Then, we derived the physical parameters of HD174966 and carried a mode identification out from the spectroscopic and photometric observations. We used this information to look for the models fulfilling all the conditions and discussed the inaccuracies of the method because of the rotation effects. In a final step, we searched for patterns in the frequency set using a Fourier transform, discussed its origin and studied the possibility of using the periodicity to obtain information about the physical parameters of the star. A total of 185 peaks were obtained from the Fourier analysis of the CoRoT light curve, being almost all reliable pulsating frequencies. From the spectroscopic observations, 18 oscillation modes were detected and identified, and the inclination angle ($62.5^{\circ}$$^{+7.5}_{-17.5}$) and the rotational velocity of the star (142 km/s) were estimated. From the multi-colour photometric observations, 3 frequencies were detected, which correspond to the main ones in the CoRoT light curve. We looked for periodicities within the 185 frequencies and found a periodic pattern ~64 ��Hz. Using the inclination angle, the rotational velocity and an Echelle diagram, showing a double comb outside the asymptotic regime, we concluded that the periodicity corresponds to a large separation structure. The periodic pattern allowed us to discriminate models from a grid, finding that the value of the mean density is achieved with a 6% uncertainty. So, the pattern could be used as a new observable for A-F type stars., 15 pages, 10 figures, 6 tables

Scaling relations between asteroseismic quantities and stellar parameters are essential tools for studying stellar structure and evolution. We will address two of them, namely, the relation between the large frequency separation ($����$) and the mean density ($\bar��$) as well as the relation between the frequency of the maximum in the power spectrum of solar-like oscillations ($��_{\rm max}$) and the cut-off frequency ($��_{\rm c}$). For the first relation, we will consider the possible sources of uncertainties and explore them with the help of a grid of stellar models. For the second one, we will show that the basic physical picture is understood and that departure from the observed relation arises from the complexity of non-adiabatic processes involving time-dependent treatment of convection. This will be further discussed on the basis of a set of 3D hydrodynamical simulation of surface convection., To appear in Proceedings of Fujihara Seminar 2012: "Progress in physics of the sun and stars: a new era in helio- and asteroseismology" H. Shibahashi, ed., ASP Conf. Ser

Asteroseismology based on observations from the space-borne missions CoRoT and Kepler provides a powerful means of testing the modeling of transport processes in stars. Rotational splittings are currently measured for a large number of red giant stars and can provide stringent constraints on the rotation profiles. The aim of this paper is to obtain a theoretical framework for understanding the properties of the observed rotational splittings of red giant stars with slowly rotating cores. This allows us to establish appropriate seismic diagnostics for the rotation of these evolved stars. Rotational splittings were computed for stochastically excited dipolar modes by adopting a first-order perturbative approach for two 1.3 M⊙ benchmark models that assume slowly rotating cores. For red giant stars with slowly rotating cores, we show that the variation in the rotational splittings of ℓ = 1 modes with frequency depends only on the large frequency separation, the g-mode period spacing, and the ratio of the average envelope to core rotation rates (ℛ). This led us to propose a way to infer directly ℛ from the observations. This method is validated using the Kepler red giant star KIC 5356201. Finally, we provide theoretical support for using a Lorentzian profile to measure the observed splittings for red giant stars. peerReviewed

Deep radio observations of galaxy clusters have revealed the existence of diffuse radio sources related to the presence of relativistic electrons and weak magnetic fields in the intracluster volume. The role played by this non-thermal intracluster component on the thermodynamical evolution of galaxy clusters is debated, with important implications for cosmological and astrophysical studies of the largest gravitationally bound structures of the Universe. The low surface brightness and steep spectra of diffuse cluster radio sources make them more easily detectable at low-frequencies. LOFAR is the first instrument able to detect diffuse radio emission in hundreds of massive galaxy clusters up to their formation epoch (z ˜ 1). We present the first observations of clusters imaged by LOFAR and the huge perspectives opened by this instrument for non-thermal cluster studies.

International audience

International audience

Deep radio observations of galaxy clusters have revealed the existence of diffuse radio sources related to the presence of relativistic electrons and weak magnetic fields in the intracluster volume. The role played by this non-thermal intracluster component on the thermodynamical evolution of galaxy clusters is debated, with important implications for cosmological and astrophysical studies of the largest gravitationally bound structures of the Universe. The low surface brightness and steep spectra of diffuse cluster radio sources make them more easily detectable at low-frequencies. LOFAR is the first instrument able to detect diffuse radio emission in hundreds of massive galaxy clusters up to their formation epoch (z ˜ 1). We present the first observations of clusters imaged by LOFAR and the huge perspectives opened by this instrument for non-thermal cluster studies.

Asteroseismology with the space-borne missions CoRoT and Kepler provides a powerful mean of testing the modeling of transport processes in stars. Rotational splittings are currently measured for a large number of red giant stars and can provide stringent constraints on the rotation profiles. The aim of this paper is to obtain a theoretical framework for understanding the properties of the observed rotational splittings of red giant stars with slowly rotating cores. This allows us to establish appropriate seismic diagnostics for rotation of these evolved stars. Rotational splittings for stochastically excited dipolar modes are computed adopting a first-order perturbative approach for two $1.3 M_\odot$ benchmark models assuming slowly rotating cores. For red giant stars with slowly rotating cores, we show that the variation of the rotational splittings of $\ell=1$ modes with frequency depends only on the large frequency separation, the g-mode period spacing, and the ratio of the average envelope to core rotation rates (${\cal R}$). This leds us to propose a way to infer directly ${\cal R}$ from the observations. This method is validated using the Kepler red giant star KIC 5356201. Finally, we provide a theoretical support for the use of a Lorentzian profile to measure the observed splittings for red giant stars., Comment: 15 pages, 15 figures, accepted for publication in A&A

Context.Be stars are rapidly rotating stars with a circumstellar decretion disk. They usually undergo pressure and/or gravity pulsation modes excited by the κ-mechanism, i.e. an effect of the opacity of iron-peak elements in the envelope of the star. In the Milky Way,p-modes are observed in stars that are hotter than or equal to the B3 spectral type, while g-modes are observed at the B2 spectral type and cooler.Aims.We observed a B0IVe star, HD 51452,with the high-precision, high-cadence photometric CoRoT satellite and high-resolution, ground-based HARPS and SOPHIE spectrographs to study its pulsations in great detail. We also used the lower resolution spectra available in the BeSS atabase. Methods.We analyzed the CoRoT and spectroscopic data with several methods: Clean -NG, Freq Find, and a sliding window method.We also analyzed spectral quantities, such as the violet over red (V/R) emission variations, to obtain information about the variation in the circumstellar environment. We calculated a stellar structure model with the ESTER code to test the various interpretation of the results.Results.We detect 189 frequencies of variations in the CoRoT light curve in the range between 0 and 4.5 c d−1. The main frequencies are also recovered in the spectroscopic data. In particular we find that HD 51452 undergoes gravito-inertial modes that are not in the domain of those excited by the κ-mechanism. We propose that these are stochastic modes excited in the convective zones and that at least some of them are a multiplet of r-modes (i.e. subinertial modes mainly driven by the Coriolis acceleration). Stochastically excited gravito-inertial modes had never been observed in any star, and theory predicted that their very low amplitudes would be undetectable even with CoRoT. We suggest that the amplitudes are enhanced in HD 51452 because of the very rapid stellar rotation.In addition, we find that the amplitude variations of these modes are related to the occurrence of minor outbursts.Conclusions.Thanks to CoRoT data, we have detected a new kind of pulsations in HD 51452, which are stochastically excited gravito-inertial modes, probably due to its very rapid rotation. These modes are probably also present in other rapidly rotating hot Be stars.

The origin and evolution of the Milky Way remains one of the key unanswered questions in astrophysics. From a sample of roughly 700 stars selected in order to probe the galactic thick disc outside the solar neighborhood, we investigate the radial scale length and scale height of this structure, based on the spectroscopic measurement of its star members. Estimations of the scale height and scale lengths for different metallicity bins result in consistent values, with HrValue and HzValue, showing no evidence of relics of destroyed massive satellites and challenging the radial migration mechanisms as being the most important processes of creation of the thick disc.

At 140 years of the discovery of the moving groups, these stellar streams are emerging as powerful tools to constrain the models for the spiral arms and the Galactic bar in the Gaia era. From the kinematic-age-metallicity analysis in the solar neighbourhood it is now well established that some of these kinematic structures have a dynamical origin, different from the classical cluster disruption hypothesis. Test particle simulations allow us to definitively establish that these local structures can be created by the dynamical resonances

Asteroseismology of stars that exhibit solar-like oscillations are enjoying a growing interest with the wealth of observational results obtained with the CoRoT and Kepler missions. In this framework, scaling laws between asteroseismic quantities and stellar parameters are becoming essential tools to study a rich variety of stars. However, the physical underlying mechanisms of those scaling laws are still poorly known. Our objective is to provide a theoretical basis for the scaling between the frequency of the maximum in the power spectrum ($\nu_{\rm max}$) of solar-like oscillations and the cut-off frequency ($\nu_{\rm c}$). Using the SoHO GOLF observations together with theoretical considerations, we first confirm that the maximum of the height in oscillation power spectrum is determined by the so-called \emph{plateau} of the damping rates. The physical origin of the plateau can be traced to the destabilizing effect of the Lagrangian perturbation of entropy in the upper-most layers which becomes important when the modal period and the local thermal relaxation time-scale are comparable. Based on this analysis, we then find a linear relation between $\nu_{\rm max}$ and $\nu_{\rm c}$, with a coefficient that depends on the ratio of the Mach number of the exciting turbulence to the third power to the mixing-length parameter., Comment: 8 pages, 11 figures. Accepted in A&A

Six O-type stars were observed continuously by the CoRoT satellite during a 34.3-day run. The unprecedented quality of the data allows us to detect even low-amplitude stellar pulsations in some of these stars (HD 46202 and the binaries HD 46149 and Plaskett's star). These cover both opacity-driven modes and solar-like stochastic oscillations, both of importance to the asteroseismological modelling of O stars. Additional effects can be seen in the CoRoT light curves, such as binarity and rotational modulation. Some of the hottest O-type stars (HD 46223, HD 46150 and HD 46966) are dominated by the presence of red-noise: we speculate that this is related to a sub-surface convection zone., Comment: 5 pages, 3 figures, conference paper. To be published in "Four decades of Research on Massive Stars", Astronomical Society of the Pacific. Eds. C. Robert, N. St-Louis and L. Drissen

The CoRoT satellite has made available high precision photometric observations of a large number of stars of different spectral types. Continuous photometric time series allow the characterization of stellar microvariability in a systematic way. We determine an index indicating the level of activity, derived from photometric data, for a large sample of stars with different color temperatures. We also assess to what extent this index can be related to an estimated Rossby number for stars whose rotation period can be estimated. We also estimate a characteristic lifetime of the surface heterogeneities. Our work is based on the Fourier analysis of stellar light curves. We analyzed the Fourier power spectra of 430 selected light curves obtained by CoRoT during three observation runs. The low-frequency contribution of the stellar variability is modelled by a "generalized semi-lorentzian" profile. An activity index is derived from the fitted amplitude and width of the semi-lorentzian model. Some of the Fourier spectra exhibit a rotational modulation which enables the determination of the rotation period. In addition, a convective turnover time is derived from a grid of stellar models, so that a Rossby number can be estimated. A characteristic lifetime of the phenomena causing the observed power at low frequency is assessed from the fitted model of the power spectrum and is compared to the rotation period. Higher values of the microvariability index are observed among the coolest stars from our sample. 28 light curves show a clear rotational modulation. The estimated Rossby number of most of the observed stars with a rotational modulation is less than 1. The activity index decreases with increasing Rossby number. The quality of the CoRoT data enables the determination of the characteristic lifetime of active structures. It is shown to increase with the rotation period., Comment: second revised version submitted to A&A on April 11, 2011 10 pages, 8 figures

A spectroscopic survey of nearly 600 stars probing the Galactic Thick Disc far from the Solar neighbourhood is performed. The MATISSE (MATrix Inversion for Spectral SynthEsis) algorithm is developed and trained in order to automatically obtain the atmospheric parameters of the stars. The derived effective temperatures, surface gravities and overall metallicities are then combined to stellar evolution isochrones, radial velocities and proper motions to get the distances, kinematics and orbital parameters of the sample stars, up to 8 kpc. The Galactic components Thin and Thick discs and Halo are then characterized. The velocity ellipsoid for the old Thin Disc is found at (σ_u, σ_v, σ_w)= (39,27,20) km s-1 with a mean [M/H] ˜ -0.12~dex, whereas the Thick Disc has a mean [M/H] ˜ -0.4~dex and a rotational lag of V ˜-76 km s-1

The understanding of the star formation is still on progress. Especially, the formation of high-mass stars is much less understood than the low-mass case: even the time order of observational phenomena is uncertain. Water, one of the most important molecules in the Universe, might elucidate key episodes in the process of stellar birth, and especially could be a major role in the formation of high-mass stars. For both types of stars, the source chemical composition is not well known and even less known is the chemical evolution of the interstellar matter throughout the various phases of star formation. This talk presents the first results of the various Herschel Space Observatory star formation key-programs. One of the instruments on-board HSO, HIFI, is the most powerful spectrometer never built, covering a huge frequency range, most of them unaccessible from ground. In particular, one of the KP, WISH, aims at following the process of star formation during the various stages and at using the water as a physical diagnostic throughout the evolution.

Contains fulltext : 84217.pdf (Author’s version preprint ) (Open Access) Contains fulltext : 84217.pdf (Publisher’s version ) (Open Access)

From the seismic data obtained by CoRoT for the star HD 49933 it is possible, as for the Sun, to constrain models of the excitation of acoustic modes by turbulent convection. We compare a stochastic excitation model described in Paper I (arXiv:0910.4027) with the asteroseismology data for HD 49933, a star that is rather metal poor and significantly hotter than the Sun. Using the mode linewidths measured by CoRoT for HD 49933 and the theoretical mode excitation rates computed in Paper I, we derive the expected surface velocity amplitudes of the acoustic modes detected in HD 49933. Using a calibrated quasi-adiabatic approximation relating the mode amplitudes in intensity to those in velocity, we derive the expected values of the mode amplitude in intensity. Our amplitude calculations are within 1-sigma error bars of the mode surface velocity spectrum derived with the HARPS spectrograph. The same is found with the mode amplitudes in intensity derived for HD 49933 from the CoRoT data. On the other hand, at high frequency, our calculations significantly depart from the CoRoT and HARPS measurements. We show that assuming a solar metal abundance rather than the actual metal abundance of the star would result in a larger discrepancy with the seismic data. Furthermore, calculations that assume the ``new'' solar chemical mixture are in better agreement with the seismic data than those that assume the ``old'' solar chemical mixture. These results validate, in the case of a star significantly hotter than the Sun and Alpha Cen A, the main assumptions in the model of stochastic excitation. However, the discrepancies seen at high frequency highlight some deficiencies of the modelling, whose origin remains to be understood., 8 pages, 3 figures (B-W and color), accepted for publication in Astronomy & Astrophysics. Corrected typo in Eq. (4). Updated references. Language improvements

International audience; Light curve parameters and classification results are presented for all the objects measured in the first four CoRoT observing runs: IRa01, SRc01, LRc01, and LRa01. The information presented here should allow scientists to make candidate lists of their objects of study and to obtain some basic light curve information. We recall that we did not perform detailed light curve modelling, only a basic one, sufficient for producing variability class memberships for each target. We refer to the paper for a detailed description of the light curve parameters, and the classification results. It is strongly advised to read the paper prior to using the results presented here. (4 data files).

International audience; Light curve parameters and classification results are presented for all the objects measured in the first four CoRoT observing runs: IRa01, SRc01, LRc01, and LRa01. The information presented here should allow scientists to make candidate lists of their objects of study and to obtain some basic light curve information. We recall that we did not perform detailed light curve modelling, only a basic one, sufficient for producing variability class memberships for each target. We refer to the paper for a detailed description of the light curve parameters, and the classification results. It is strongly advised to read the paper prior to using the results presented here. (4 data files).

International audience; Light curve parameters and classification results are presented for all the objects measured in the first four CoRoT observing runs: IRa01, SRc01, LRc01, and LRa01. The information presented here should allow scientists to make candidate lists of their objects of study and to obtain some basic light curve information. We recall that we did not perform detailed light curve modelling, only a basic one, sufficient for producing variability class memberships for each target. We refer to the paper for a detailed description of the light curve parameters, and the classification results. It is strongly advised to read the paper prior to using the results presented here. (4 data files).

International audience; Light curve parameters and classification results are presented for all the objects measured in the first four CoRoT observing runs: IRa01, SRc01, LRc01, and LRa01. The information presented here should allow scientists to make candidate lists of their objects of study and to obtain some basic light curve information. We recall that we did not perform detailed light curve modelling, only a basic one, sufficient for producing variability class memberships for each target. We refer to the paper for a detailed description of the light curve parameters, and the classification results. It is strongly advised to read the paper prior to using the results presented here. (4 data files).

International audience; Light curve parameters and classification results are presented for all the objects measured in the first four CoRoT observing runs: IRa01, SRc01, LRc01, and LRa01. The information presented here should allow scientists to make candidate lists of their objects of study and to obtain some basic light curve information. We recall that we did not perform detailed light curve modelling, only a basic one, sufficient for producing variability class memberships for each target. We refer to the paper for a detailed description of the light curve parameters, and the classification results. It is strongly advised to read the paper prior to using the results presented here. (4 data files).

It has also been suggested that the detection of a wealth of very low amplitude modes in Delta Sct stars was only a matter of signal--to--noise ratio. Access to this treasure, impossible from the ground, is one of the scientific aims of the space mission CoRoT, a space mission developed and operated by CNES. This work presents the results obtained on HD 50844: the 140,016 datapoints were analysed using independent approaches and several checks performed. A level of 10^{-5} mag was reached in the amplitude spectra of the CoRoT timeseries. The frequency analysis of the CoRoT timeseries revealed hundreds of terms in the frequency range 0--30 d^{-1}. All the cross--checks confirmed this new result. The initial guess that Delta Sct stars have a very rich frequency content is confirmed. The spectroscopic mode identification gives theoretical support since very high--degree modes (up to ell=14) are identified. We also prove that cancellation effects are not sufficient in removing the flux variations associated to these modes at the noise level of the CoRoT measurements. The ground--based observations indicate that HD 50844 is an evolved star that is slightly underabundant in heavy elements, located on the Terminal Age Main Sequence. Probably due to this unfavourable evolutionary status, no clear regular distribution is observed in the frequency set. The predominant term (f_1=6.92 d^{-1}) has been identified as the fundamental radial mode combining ground-based photometric and spectroscopic data. This work is also based on observations made with ESO telescopes under the ESO Large Programme LP178.D-0361 and on data collected at the Observatorio de Sierra Nevada, at the Observatorio Astronomico Nacional San Pedro Martir, and at the Piszkesteto Mountain Station of Konkoly Observatory., 10 pages, 11 figures. Accepted for publication in Astronomy & Astrophysics

Context. Be stars undergo outbursts producing a circumstellar disk from the ejected material. The beating of non-radial pulsations has been put forward as a possible mechanism of ejection. Aims. We analyze the pulsational behavior of the early B0.5IVe star HD 49330 observed during the first CoRoT long run towards the Galactical anticenter (LRA1). This Be star is located close to the lower edge of the β Cephei instability strip in the HR diagram and showed a 0.03 mag outburst during the CoRoT observations. It is thus an ideal case for testing the aforementioned hypothesis. Methods. We analyze the CoRoT light curve of HD 49330 usin g Fourier methods and non-lin ear least square fitting. Results. In this star, we find pulsation modes typical of β Cep stars (p modes) and SPB stars (g modes) with amplitude variations along the run directly correlated with the outburst. These results provide new clues about the origin of the Be phenomenon as well as strong constraints on the seismic modelling of Be stars.