Search

The need for physical distancing due to COVID-19 mitigation efforts forced prolonged social isolation, which may affect sleep and lead to mental health problems. Previous research has shown that young adults are particularly vulnerable to psychological stress caused by social isolation, the negative psychological impact of the pandemic, and greater frequency and severity of sleep problems. Therefore, the main goal of the present study was to examine whether insomnia could constitute a mediation mechanism that explains the relationship between social isolation experienced during the COVID-19 pandemic and mental health outcomes (depression and anxiety) reported up to 1.5 years later. The study was conducted among young (M±SD; 24.08±3.75) men (N = 1025) in Poland. Data were collected by means of self-report questionnaires, including The Social Isolation Index, The Athens Insomnia Scale, The State-Trait Anxiety Inventory (STAI-S) and Beck’s Depression Inventory (BDI-II). The results show that insomnia mediates the relationships between social isolation and both anxiety and depression. The current findings emphasize the role of insomnia in the relationships between social isolation experienced during COVID-19 and negative emotional states. From a clinical perspective, the results suggest that implementing therapeutic components that address social isolation in insomnia treatment programs may prevent the development of depression and anxiety symptoms among young men.

The paper reviews the properties of cement composites reinforced with short fibres. The effect of natural fibres was investigated: cotton, sisal, jute, ramie, bamboo, and synthetic fibres: polymer and polypropylene. It was noticed that the fibres change the consistency of the mixture up to 15%. In the composite flexural strength tests, a change in strength by +/− 8% was observed, depending on the type of fibres used. The research shows that the use of natural fibres had a positive effect on the compressive strength by 27%, while the use of synthetic fibres caused its decrease by 4%. Additionally, it was noticed that the chemical composition, the diameter and the total length of the fibres in the element have an impact on the composite shrinkage. The fibre-containing composites showed an 8% higher water absorption compared to the non-fibre samples. The exception is the ramie fibres, which reduce water absorption. In general, a positive effect of natural fibers on the properties of cement composites has been noticed, however, in case of natural fibres application, a thorough further properties investigation is recommended.

Hydrotechnical constructions are mostly objects functioning in extreme conditions and requiring a custom-made construction project. In the case of using prefabricated elements, it is required to develop production, transport, assembly, conservation and repair technology. Concerning the problem of concrete cracks, modern repair systems allow positive effects to be achieved in many cases of concrete elements repair. In this work an attempt has been made to assess the properties of concrete, situated in the Baltic Sea environment, in which traditional rebar was partly replaced by dispersed fibre-phase. Fibre-reinforced concrete belongs to the group of composite materials. The presence of fibres helps to increase the tensile strength, flexural strength and resilience and also prevents the appearance of cracks. In the given paper we will also discuss basic parameters of steel and polymer fibres and the influence of both types of fibres on the maturing and hardened concrete. In this work special attention has been paid to the advantages of polypropylene and polymer fibres with regard to commonly-known steel fibres. The use of synthetic fibres will be advantageous in constructions where the reduction of shrinkage cracks and high resilience are essential. On top of that, the use of synthetic fibres is highly recommended when constructing objects that will be exposed to the impact of an aggressive environment. Undoubtedly, polymer fibres are resistant to the majority of corrosive environments. Fibre-reinforced concretes are a frequently implemented construction solution. The possibility of concrete modification allows the emergence of new construction materials with improved physical-mechanical properties, under the condition of being applied relevantly.

Additional file 1: Methods. Contains all additional information on methods used in the study.

Background Protein disulphide isomerases (PDIs) play an important role in cancer progression. However, the relative contribution of the various isoforms of PDI in tumorigenesis is not clear. Methods The content of PDI isoforms in 22 cancer cells lines was investigated using LC–MS/MS-based proteomic analysis. The effects of PDIA1, PDIA3 and PDIA17 inhibition on the proliferation, migration and adhesion of MCF-7 and MDA-MB-231 cells, identified as high and low PDIA17 expressing cells, respectively, were assessed using novel aromatic N-sulphonamides of aziridine-2-carboxylic acid derivatives as PDI inhibitors. Results PDIA1 and PDIA3 were the most abundant in cancer cell lysates and were also detected extracellularly in breast cancer cells (MDA-MB-231 and MCF-7). Some cancer cell lines (e.g., MCF-7, HT-29) showed upregulated expression of PDIA17, whereas in others (e.g., MDA-MB-231, 67NR), PDIA17 was not detected. The simultaneous inhibition of PDIA1 and PDIA3 showed similar anti-proliferative effects in MCF-7 and MDA-MB-231 breast cancer cells. However, the inhibition of PDIA1 and PDIA17 in the MCF-7 cell line resulted in more effective anti-adhesive and anti-proliferative effects. Conclusions PDIA1 and PDIA3 represent major isoforms of multiple cancer cells, and their non-selective inhibition displays significant anti-proliferative effects irrespective of whether or not PDIA17 is present. The more pronounced anti-adhesive effects of PDI inhibition in hormone-sensitive MCF-7 cells featured by higher levels of PDIs when compared to triple-negative MDA-MB-231 cells suggests that targeting extracellular PDIA1 and PDIA3 with or without additional PDIA17 inhibition may represent a strategy for personalized anti-adhesive, anti-metastatic therapy in cancers with high PDI expression.

Background Platelet-derived protein disulfide isomerase 1 (PDIA1) regulates thrombus formation, but its role in the regulation of platelet function is not fully understood. Aims The aim of this study was to characterize the role of PDIA1 in human platelets. Methods Proteomic analysis of PDI isoforms in platelets was performed using LC-MS/MS, and the expression of PDIs on platelets in response to collagen, TRAP-14, or ADP was measured with flow cytometry. The effects of bepristat, a selective PDIA1 inhibitor, on platelet aggregation, expression of platelet surface activation markers, thromboxane A2 (TxA2 ) and reactive oxygen species (ROS) generation were evaluated by optical aggregometry, flow cytometry, enzyme-linked immunosorbent assay and dihydrodichlorofluorescein diacetate-based fluorescent assay, respectively. Results PDIA1 was less abundant compared to PDIA3 in resting platelets and platelets stimulated with TRAP-14, collagen or ADP. Collagen, but not ADP, induced a significant increase in PDIA1 expression. Bepristat potently inhibited the aggregation of washed platelets induced by collagen or convulxin, but only weakly inhibited platelet aggregation induced by TRAP-14 or thrombin, and had the negligible effect on platelet aggregation induced by arachidonic acid. Inhibition of PDIA1 by bepristat resulted in the reduction of thromboxane A2 and ROS production in collagen- or thrombin-stimulated platelets. Furthermore, bepristat reduced the activation of αIIbβ3 integrin and expression of P-selectin. Conclusions PDIA1 acts as an intraplatelet regulator of the ROS-TxA2 pathway in collagen-GP VI receptor-mediated platelet activation that is a mechanistically distinct pathway from extracellular regulation of αIIbβ3 integrin by PDIA3.

Additional file 2: Table S1. The origin and conditions of maintenance of cell cultures.

Additional file 3: Table S2. The half maximal inhibitory concentration for selected PDIA1, PDIA3 and PDIA17 inhibitors.

Predicting the properties of concrete before its design and application process allows for refining and optimizing its composition. However, the properties of lightweight concrete are much harder to predict than those of normal weight concrete, especially if the forecast concerns the insulating properties of concrete with artificial lightweight aggregate (LWA). It is possible to use porous aggregates and precisely modify the composition of lightweight concrete (LWC) with specific insulating properties. In this case, it is advisable to determine the parameters of the components and perform preliminary laboratory tests, and then use theoretical methods (e.g., artificial neural networks (ANNs) to predict not only the mechanical properties of lightweight concrete, but also its thermal insulation properties. Fifteen types of lightweight concrete, differing in light filler, were tested. Lightweight aggregates with different grain diameters and lightweight aggregate grains with different porosity were used. For the tests, expanded glass was applied as a filler with very good thermal insulation properties and granulated sintered fly ash, characterized by a relatively low density and high crushing strength in the group of LWAs. The aim of the work is to demonstrate the usefulness of an ANN for the determination of the relationship between the selection of the type and quantity of LWA and porosity, density, compressive strength, and thermal conductivity (TC) of the LWC.

Most hydrotechnical buildings under construction demand the concrete mixture to be set directly under water. The main reason for such a procedure is to limit the washing away of the the concrete binding mixture and to increase the efficiency of organisation of work so as to ensure continuity in concreting. The impact on the aquatic environment of recent developments in concrete technology and the use of new components has not yet been established. Natural pebble aggregate containing portland cement and fugacious siliceous ash as a binder was used to prepare BP concrete samples, while concrete marked LB was composed with lightweight aggregate and portland cement as a binder. The aim of this paper was to answer to the question whether hydrotechnical concrete of different compositions (BP and LB) and the technology of setting in a water habitat have any influence on the life condition of commonly occurring Dreissena polymorpha (Mollusca, Bivalvia). The lethal effect of two types of freshly hardening concrete was observed. In the case of LB concrete the lethal outcome for D. polymorpha could be the effect of a considerable increase of electrolytic conduction in the test cultivation. In the case of BP the parameters of electrolytic conductivity and pH did not exceed the values appearing in lakes. The possibility of the occurrence of toxic compounds of D. polymorpha, arising from the reaction of the aquatic / lake environment or the elution of some components should be taken into account. D. polymorpha serves as an indicator of toxicity in the aquatic environment and therefore can be used as a model organism in the analysis of the influence concrete on the natural environment. The results obtained in this study indicate the significant impact of modern chemical composition of concrete on the aquatic environment and the living organisms that cover it. They underline the need for research based on the hydrobiont reaction to the substances used in the natural environment.

Background. Mycotoxins – substances harmful to humans, are ubiquitous in the environment. Mycotoxins are generated primarily by Penicilium, Aspergillus and Fusarium genus fungi. Their presence is associated with the unavoidable presence of mold fungi in the environment. The presently observed adverse climatic changes could negatively affect agriculture, causing erosion and loss of organic matter from soil, promulgation of pests and plant diseases, including those originating from pathogenic molds, and also migration of certain mold species into new regions, ultimately creating more favorable conditions for generation of mycotoxins. Objective. The purpose of this work was to investigate contamination of cereals in Poland with Fusarium and ochratoxin A. Elucidating a correlation between precipitation levels in the individual Provinces and reported levels of the investigated mycotoxins, referring to the generally available meteorological databases, would result in more efficient planning of sampling processes and focusing further preventive actions associated with establishing sampling plans for the following years. Material and methods. Investigations were performed on cereal and cereal product samples taken by the official foodstuffs inspection staff. Some 100 samples were taken annually in the 2009-2012 period (357 samples in total). Tests were performed using high performance liquid chromatography coupled with mass spectrometry (HPLC-MS/MS). Precipitation data were obtained from the Central Office of Statistics, based on data received from the Institute of Meteorology and Water Management. Results. Analysis of the influence of precipitation levels during vegetation period on mycotoxin levels in the investigated foodstuffs was performed by associating each recorded content of deoxynivalenol (n=52, corresponding to 14.6% tested samples), zearalenone (n=30, 8.4%), total T-2 and HT-2 toxins (n=21, 5.9%) and ochratoxin A (n=88, 24.6%) above quantification limit with precipitation levels within the Province from which the sample originated. Deoxynivalenol and zearalenone levels show distinct variability corresponding with variability of precipitation levels, well reflecting the reported higher deoxynivalenol and zearalenone levels observed during the rainy years of 2011-2012. Variability in average ochratoxin A levels was not statistically significant. The relatively higher mycotoxin levels in 2009 may result from the heavy rainfall and flooding of 2007-2008. Dependence between the precipitation levels and number of samples showing levels above quantification limit has been also observed for deoxynivalenol. However, a similar analysis made for zearalenone and ochratoxin A does not point to any significant relationship. No data analysis was possible in reference to total T-2 and HT-2 toxins content due to the insufficient number of results available. However, it should be noted that 21% analyzed samples in 2009 contained T-2 and HT-2 levels above the quantification limit, with average of 8.9 μg/kg, whereas in 2010-2012 only one sample of the 263 tested contained contaminants in quantities above the quantification limit. Conclusions. The model used for forecasting presence of mycotoxins in cereals does not allow its practical application during routine generation of official control and monitoring plans on national scale. Notably, tests performed show that exceeding of maximum contamination levels occurred just incidentally, notwithstanding the adverse weather conditions. Further systematic collection of data on mycotoxin contamination of agricultural crops is required for effective continued investigations.

The aim of this study was to develop and validate the novel microLC/MS-MRM method for the simultaneous quantification of six proteins: angiopoietin 2 (Angpt-2), soluble form of fms-like tyrosine kinase 1 (sFLT-1), plasminogen activator inhibitor 1 (PAI-1), tissue plasminogen activator (t-PA), endocan (ESM-1), soluble form of E-selectin (sE-sel), and one peptide: adrenomedullin (ADM) in mouse plasma. Two approaches were compared: a stable isotope dilution (SID) method- used as a reference and a modified SID (mSID) procedure. In SID strategy the calibration curves were used, whereas in mSID the ratio between the chromatogram peak area of endogenous tryptic peptides at unknown concentration to chromatogram peak area of exogenous, stable isotope-labelled internal standards (SISs) added to the sample at known concentration was calculated. The microLC/MS-MRM method in the SID approach was linear from 0.250 pmol/mL to 250 pmol/mL for Angpt-2; 5 pmol/mL to 5000 pmol/mL for sFLT-1; 2.5 pmol/mL to 5000 pmol/mL for PAI-1; 0.375 pmol/mL to 250 pmol/mL for t-PA; 0.375 pmol/mL to 187.5 pmol/mL for ESM-1; 2.5 pmol/mL to 5000 pmol/mL for sE-sel and 0.375 pmol/mL to 250 pmol/mL for ADM. LPS-induced changes in plasma assessed based on SID and mSID approaches gave comparable quantitative results and featured LPS-induced dysregulation of endothelial permeability (Angpt-2, sFLT-1), glycocalyx injury (SDC-1) accompanied by a pro-thrombotic response (PAI-1). In addition, we applied microLC/MS-MRM method with mSID strategy to analyze human plasma samples from patients with chronic myeloid leukemia (CML) and obstructive sleep apnoea (OSA) and demonstrated usefulness of the method to characterize endothelial function in humans. In conclusion, the microLC/MS-MRM method with mSID strategy applied for simultaneous quantification of protein biomarkers of endothelial function in plasma represents a novel targeted proteomic platform for the comprehensive evaluation of endothelial function in mice and humans.

Background. Mycotoxins belong to substances harmful to human health. They are found mainly in cereal products and their preparations. In particular, infants and young children who consume cereal products, including porridge and gruel, are exposed to these substances. Objective. The aim of the study is to assess the exposure of infants and young children in Poland to micotoxins (ochratoxin A. deoxynivalenol, nivalenol, fumonisins B1 and B1, T-2 and HT-2 toxins) derived from cereal products intended for infants and children. Material and methods. Samples of products (302) were taken from all over the country in the following three years (2011, 2012 and 2013). HPLC-MS / MS method was used to determine the test compounds. Results. Using the HPLC-MS / MS method, the assessment of population exposure in Poland to mikototoxins (ochratoxin A, deoxynivalenol, nivalenol, fumonisins B1 and B1, T-2 and HT-2 toxins) derived from cereal products (porridge, gruel) intended for infants and small children. Samples (302) were taken from across the country over the next three years. The exposure values obtained in the average exposure scenario range from 0.2 to 3% compared to the reference toxicological parameters. Considering that in the case of infants and young children, the tested products constitute a quantitatively significant part of the balanced diet of these consumers, and the remaining groups of foodstuffs, including vegetable products. fruit and meat and dairy products do not contribute significant amounts of mycotoxins to the diet can be accepted. that the level of contamination of cereal products does not pose a significant risk to the health of consumers. In the case of high exposure, it did not exceed 10% of the reference values for deoxynivalenol and the sum of fumonisins B1 and B2. These values were assessed as not relevant for the exposure of infants and young children. In contrast, in the case of zearalenone, the high level of exposure corresponded to 36% of the value of tolerable daily intake (TDI), and for the sum of T-2 and HT-2 toxins, the value of 48% of tolerable daily intake. In both cases, the contribution of pollutants to the diet was significant, but still remained 2-3 times less than the tolerable daily intake. Given, that cereal products are the main source of these contaminants, it can be estimated that exceeding the TDI value in relation to the total diet of infants and young children is unlikely. Conclusions. The exposure values obtained in the average exposure scenario range from 0.2 to 3% compared to the reference toxicological parameters. In the case of zearalenone, the high level of exposure corresponded to 36% of the TDI value. and for the sum of T-2 and HT-2 toxins, 48% TDI. The contribution of pollutants to the diet in both cases was significant. however, it still remained 2-3 times less than the tolerable daily intake. Considering, that cereal products are the main source of these pollutants can be assessed. that exceeding the TDI value for the total diet of infants and young children is unlikely.

In light of the scientific research, the corrosion of concrete structures is one of the main problems that may reduce their durability due to the negative impact of the natural environment. The paper analyzes the influence of the type of component on the selected properties of lightweight concrete subjected to the influence of aggressive liquids. Four concrete mixes were prepared with a granular aggregate made of foamed glass (GEGA) and aggregate made of sintered fly ash (GAA) with the use of a mineral additive: silica fly ash. The prepared lightweight concrete after one year was exposed for 60 days to the following environments: strong acid—HCl, 1% and 2% concentration, weak acid—CH3COOH, 1% and 2% concentration, and an aqueous salt solution of Na2SO4, 1% and 2% concentration. Then, the compressive strength was tested, and the microstructure analysis of the ready-made lightweight concrete (LWC) was performed. The degree of penetration of aggressive solutions into the cracks of the samples was assessed by means of applying 1% phenolphthalein solution. Changes in the weight of lightweight concrete samples after the test period were estimated. The obtained test results indicate that the decrease in the durability of lightweight concrete can be classified as a long-term process. Concrete with GEGA and GAA showed high resistance to aggressive environments. Moreover, the environment containing chlorides turned out to be the most aggressive, while the environment containing sulfates proved to be the least aggressive. The higher the concentration of the destructive factor was, the faster the corrosion process went. This has been proven by measuring the pH using phenolphthalein and carrying out microscopic examination. Concretes containing aggregates made of foamed glass and sintered fly ash are suitable for use both in traditional construction and in facilities exposed to an aggressive environment (e.g., in the chemical industry and at gas stations).

The DataSet contains the results of the mechanical behaviour of a concrete beam under a 3-point bending test. The beams had dimensions 15 x 15 x 70 cm3. The beam B-Con was made of concrete without fibres (as the reference beam), while beams B-002, B-004, and B-006 were manufactured from the concrete mix containing 2 kg/m3, 4 kg/m3 and 6 kg/m3 of fibres, respectively. The elements were notched to induce crack formation in a specific area of the beams. The notch had a width of 4 mm and a depth of 15 mm (10 % of the beam height) and was cut on the bottom of the beam in the middle of its span.

The DataSet contains the results of the mechanical behaviour of a concrete beam under a 3-point bending test. The beams had dimensions 15 x 15 x 70 cm3. The beam B-Con was made of concrete without fibres (as the reference beam), while beams B-002, B-004, and B-006 were manufactured from the concrete mix containing 2 kg/m3, 4 kg/m3 and 6 kg/m3 of fibres, respectively. The elements were notched to induce crack formation in a specific area of the beams. The notch had a width of 4 mm and a depth of 15 mm (10 % of the beam height) and was cut on the bottom of the beam in the middle of its span.

The DataSet contains the results of the mechanical behaviour of a concrete beam under a 3-point bending test. The beams had dimensions 15 x 15 x 70 cm3. The beam B-Con was made of concrete without fibres (as the reference beam), while beams B-002, B-004, and B-006 were manufactured from the concrete mix containing 2 kg/m3, 4 kg/m3 and 6 kg/m3 of fibres, respectively. The elements were notched to induce crack formation in a specific area of the beams. The notch had a width of 4 mm and a depth of 15 mm (10 % of the beam height) and was cut on the bottom of the beam in the middle of its span.

The DataSet contains the results of the mechanical behaviour of a concrete beam under a 3-point bending test. The beams had dimensions 15 x 15 x 70 cm3. The beam B-Con was made of concrete without fibres (as the reference beam), while beams B-002, B-004, and B-006 were manufactured from the concrete mix containing 2 kg/m3, 4 kg/m3 and 6 kg/m3 of fibres, respectively. The elements were notched to induce crack formation in a specific area of the beams. The notch had a width of 4 mm and a depth of 15 mm (10 % of the beam height) and was cut on the bottom of the beam in the middle of its span.

Background Long‐term feeding with a high‐fat diet (HFD) induces endothelial dysfunction in mice, but early HFD‐induced effects on endothelium have not been well characterized. Methods and Results Using an magnetic resonance imaging‐based methodology that allows characterization of endothelial function in vivo, we demonstrated that short‐term (2 weeks) feeding with a HFD to C57BL/6 mice or to E3L.CETP mice resulted in the impairment of acetylcholine‐induced response in the abdominal aorta (AA), whereas, in the thoracic aorta (TA), the acetylcholine‐induced response was largely preserved. Similarly, HFD resulted in arterial stiffness in the AA, but not in the TA. The difference in HFD‐induced response was ascribed to distinct characteristics of perivascular adipose tissue in the TA and AA, related to brown‐ and white‐like adipose tissue, respectively, as assessed by histology, immunohistochemistry, and Raman spectroscopy. In contrast, short‐term HFD‐induced endothelial dysfunction could not be linked to systemic insulin resistance, changes in plasma concentration of nitrite, or concentration of biomarkers of glycocalyx disruption (syndecan‐1 and endocan), endothelial inflammation (soluble form of vascular cell adhesion molecule 1, soluble form of intercellular adhesion molecule 1 and soluble form of E‐selectin), endothelial permeability (soluble form of fms‐like tyrosine kinase 1 and angiopoietin 2), and hemostasis (tissue plasminogen activator and plasminogen activator inhibitor 1). Conclusions Short‐term feeding with a HFD induces endothelial dysfunction in the AA but not in the TA, which could be ascribed to a differential response of perivascular adipose tissue to a HFD in the AA versus TA. Importantly, early endothelial dysfunction in the AA is not linked to elevation of classical systemic biomarkers of endothelial dysfunction.

Cancer cell cross-talk with the host endothelium plays a crucial role in metastasis, but the underlying mechanisms are still not fully understood. We studied the involvement of protein disulphide isomerase A1 (PDIA1) in human breast cancer cell (MCF-7 and MDA-MB-231) adhesion and transendothelial migration. For comparison, the role of PDIA1 in proliferation, migration, cell cycle and apoptosis was also assessed. Pharmacological inhibitor, bepristat 2a and PDIA1 silencing were used to inhibit PDIA1. Inhibition of PDIA1 by bepristat 2a markedly decreased the adhesion of breast cancer cells to collagen type I, fibronectin and human lung microvascular endothelial cells. Transendothelial migration of breast cancer cells across the endothelial monolayer was also inhibited by bepristat 2a, an effect not associated with changes in ICAM-1 expression or changes in cellular bioenergetics. The silencing of PDIA1 produced less pronounced anti-adhesive effects. However, inhibiting extracellular free thiols by non-penetrating blocker p-chloromercuribenzene sulphonate substantially inhibited adhesion. Using a proteomic approach, we identified that &beta, 1 and &alpha, 2 integrins were the most abundant among all integrins in breast cancer cells as well as in lung microvascular endothelial cells, suggesting that integrins could represent a target for PDIA1. In conclusion, extracellular PDIA1 plays a major role in regulating the adhesion of cancer cells and their transendothelial migration, in addition to regulating cell cycle and caspase 3/7 activation by intracellular PDIA1. PDIA1-dependent regulation of cancer&ndash, endothelial cell interactions involves disulphide exchange and most likely integrin activation but is not mediated by the regulation of ICAM-1 expression or changes in cellular bioenergetics in breast cancer or endothelial cells.

Supplemental Digital Content is available in the text., Objectives: Carbon monoxide (CO) produced by haem oxygenases or released by CO-releasing molecules (CORM) affords antiplatelet effects, but the mechanism involved has not been defined. Here, we tested the hypothesis that CO–induced inhibition of human platelet aggregation is mediated by modulation of platelet bioenergetics. Approach and Results: To analyze the effects of CORM-A1 on human platelet aggregation and bioenergetics, a light transmission aggregometry, Seahorse XFe technique and liquid chromatography tandem-mass spectrometry–based metabolomics were used. CORM-A1–induced inhibition of platelet aggregation was accompanied by the inhibition of mitochondrial respiration and glycolysis. Interestingly, specific inhibitors of these processes applied individually, in contrast to combined treatment, did not inhibit platelet aggregation considerably. A CORM-A1–induced delay of tricarboxylic acid cycle was associated with oxidized nicotinamide adenine dinucleotide (NAD+) depletion, compatible with the inhibition of oxidative phosphorylation. CORM-A1 provoked an increase in concentrations of proximal (before GAPDH [glyceraldehyde 3-phosphate dehydrogenase]), but not distal glycolysis metabolites, suggesting that CO delayed glycolysis at the level of NAD+–dependent GAPDH; however, GAPDH activity was directly not inhibited. In the presence of exogenous pyruvate, CORM-A1–induced inhibition of platelet aggregation and glycolysis were lost, but were restored by the inhibition of lactate dehydrogenase, involved in cytosolic NAD+ regeneration, pointing out to the key role of NAD+ depletion in the inhibition of platelet bioenergetics by CORM-A1. Conclusions: The antiplatelet effect of CO is mediated by inhibition of mitochondrial respiration—attributed to the inhibition of cytochrome c oxidase, and inhibition of glycolysis—ascribed to cytosolic NAD+ depletion.

High requirements for the properties of construction materials and activities directed at environment protection are reasons to look for new solutions in concrete technology. This research was directed at solutions affecting the reduction of energy consumption and CO2 emissions. The use of lightweight concretes (LWCs) allows one to meet both conditions at the same time. The purpose of the research presented in this paper was to investigate the abilities of using lightweight aggregates (LWAs) of the following types: 2 and 4 mm granulated expanded glass aggregate (GEGA) as ingredients with excellent insulating properties and 8 mm granulated fly ash aggregate (GAA) as an ingredient with a relatively high resistance to crushing. The influence of the percentage participation of each aggregate in all LWCs was variable and amounted to 0%, 25%, 50%, 75%, and 100%. A series of 15 LWC mixes were prepared for various LWA participations and for a constant water&ndash, cement ratio (w/c = 0.5). Concrete tests were carried out for the following criteria: density, porosity, compressive strength, and the modulus of elasticity. In order to fully analyze fracture processes in LWCs with the participation of GEGA and GAA and to assess the correctness of the results obtained during the experiments, numerical models that corresponded to both geometrical and load diagrams of elements under research were created. The numerical analyses of the LWCs were conducted by means of the conventional finite element method (FEM).

Synovial sarcoma is a rare mesenchymal malignant neoplasm that presents a specific t(X;18) translocation forming SS18(SYT)-SSX chimera gene. It is most commonly seen in soft tissues of the extremities. The digestive tract is an exceptional site of involvement. We report a case of primary gastric synovial sarcoma in a 48-year-old female. Differential diagnosis of synovial sarcoma from other spindle cell, mesenchymal and cytokeratin-positive tumors is critical for the treatment and prognosis. Immunohistochemistry studies and molecular analysis are required to settle a proper diagnosis.

The authors of the article assessed the impact of operating fluids used to service aircraft on changing mechanical parameters of cement concrete intended for airport pavement. The research concerned concrete designed with the use of CEM I 42.5N LH NA low-alkali cement, broken granite aggregate, fine washed aggregate, and admixtures. The analysis included the assessment of changes in differences in endurance parameters over various research periods of up to 140 days. The obtained results allowed to carry out statistical analysis using the student&rsquo, s T-test. Research has shown a significant impact of operational fluids used in aircraft on the surface concrete properties of the airport. A reduction in the compressive strength of concrete exposed to one of the tested operating liquid to a reduction of 7.2% was observed over a period of 140 days, while there was no significant impact of operating fluids on tensile strength at splitting.

ABC transporters are the largest family of transport proteins, which mediate the active translocation of a wide spectrum of molecules through the cell membrane, using energy from hydrolysis of ATP. They can act as importers (in Procaryota exclusively) or exporters (in both Procaryota and Eucaryota) of specified substrates. Despite a quite conservative structure model, ABC transporters are diverse in terms of functions performed in the body. These proteins are important elements of the blood-organ barriers, they maintain lipid homeostasis, participate in cellular immune response but also are involved in the development of multidrug resistance as well as affect the biology of tumour cells. Additionally, they play the role of ion channels or regulators of their activity. The activity of ABC transporters is also correlated with the occurrence of certain disease entities, such as cystic fibrosis, Dubin-Johnson syndrome, Tangier disease, persistent hyperinsulinemic hypoglycemia of infancy (PHHI) and neoplasia. Due to their therapeutic potential, ABC transporters are becoming increasingly popular. Knowledge of the mechanisms of action of ABC transporters and their regulatory systems will provide the basis for the development of personalized medicine, which may be significant especially in the context of cancer treatment.

Global economic growth causes an increase in natural resources exploitation, particularly in construction branch. The growing use of electricity contributes to climate change. Therefore, it is necessary to search the solutions, which will allow for reducing natural resources exploitation. One of the many opportunities to do that is the application of the recycled materials. The authors of the given article have analyzed three variants of construction solutions. One of them was the production of the walls of a building from reinforced concrete prefabricates with styrofoam insulation layer. The second variant for analysis were prefabricated walls from lightweight concrete, made of sintered clay aggregate with a foam core. The third proposed variant was a system of multi-layered walls, which was made of lightweight concrete with granulated expanded glass aggregate (GEGA). The main objective of the research was to assess the use of lightweight GEGA prefabricates, focusing on economic and technological aspects of the solution. The authors have analyzed the entire construction costs, ceilings and stairs were assumed as reinforced concrete elements. In calculations, the weight of the elements was taken into account, as well as transportation and mounting costs. On the basis of this cost analysis, it was concluded that the use of prefabricated element, made of lightweight concrete with GEGA, could be a replacement for the solutions, widely applied until these days. The analysis has also shown that the use of prefabricates with GEGA is sensible from the economic viewpoint, as it allows for saving construction time. Moreover, the solutions, proposed here, allow for saving natural resources and assuming a more environmentally friendly and caring attitude.

Lightweight concrete (LWC) is a group of cement composites of the defined physical, mechanical, and chemical performance. The methods of designing the composition of LWC with the assumed density and compressive strength are used most commonly. The purpose of using LWC is the reduction of the structure&rsquo, s weight, as well as the reduction of thermal conductivity index. The highest possible strength, durability and low thermal conductivity of construction materials are important factors and reasons for this field&rsquo, s development, which lies largely in modification of materials&rsquo, composition. Higher requirements for construction materials are related to activities aiming at environment protection. The purpose of the restrictions is the reduction of energy consumption and, as a result, the reduction of CO2 emission. To limit the scope of time-consuming and often high-cost laboratory works necessary to calibrate models used in the test methods, it is possible to apply Artificial Neural Networks (ANN) to predict any of the concrete properties. The aim of this study is to demonstrate the applicability of this tool for solving the problems, related to establishing the relation between the choice of type and quantity of lightweight aggregates and the porosity, bulk density and compressive strength of LWC. For the tests porous lightweight Granulated Expanded Glass Aggregate (GEGA) and Granulated Ash Aggregate (GAA) have been used.

This study explores the monitoring of the fracture process in concrete beams and aims to characterize the evolution of damage in polyolefin fibre-reinforced concrete beams by utilizing the integrated application of two measurement techniques, digital image correlation and ultrasonic testing. The interpretation of registered wave time histories data was provided by the calculation of the magnitude-phase-composite metrics. An efficient procedure for the determination of strain field and the identification of crack height was subsequently developed. The results of the study show that the energy and phase shifts of ultrasonic waves can be used as autonomous damage indicators in a system for the real-time monitoring of a fracture process.

The implementation of low-energy construction includes aspects related to technological and material research regarding thermal insulation. New solutions are sought, firstly, to reduce heat losses and, secondly, to improve the environment conditions in isolated rooms. The effective heat resistance of insulating materials is inversely proportional to temperature and humidity. Cement composites filled with lightweight artificial aggregates may be a suitable material. Selecting a proper method for measuring the thermal conductivity of concrete is important to achieve accurate values for calculating the energy consumption of buildings. The steady state and transient methods are considered the two main thermal conductivity measurement approaches. Steady state is a constant heat transfer, whereby the temperature or heat flow is time independent. In the transient method, temperature changes over time. Most researchers have measured the conductivity of cement-based materials based on transient methods. The availability and cost of equipment, time for experimental measurements and measurement ability for moist specimens may be some of the reasons for using this method. However, considering the accuracy of the measurements, the steady state methods are more reliable, especially for testing dry materials. Four types of composites were investigated that differed in filler: natural aggregate, sintered fly ash filler, sintered clay and granular foam glass aggregate. The method of preparing the samples for testing is especially important for the obtained results. The samples, with a specific surface roughness, will show a lower coefficient of thermal conductivity by 20–30%, therefore, the selection of the type of contact layer between the plate of the measuring device and the sample is of particular importance.

Background The impairment of endothelium‐dependent vasodilation, increased endothelial permeability, and glycocalyx degradation are all important pathophysiological components of endothelial dysfunction. However, it is still not clear whether in atherosclerosis, glycocalyx injury precedes other features of endothelial dysfunction or these events coincide. Methods and Results Herein, we demonstrate that in 4‐ to 8‐week‐old apolipoprotein E/low‐density lipoprotein receptor‐deficient mice, at the stage before development of atherosclerotic plaques, impaired acetylcholine‐induced vasodilation, reduced NO production in aorta, and increased endothelial permeability were all observed; however, flow‐mediated dilation in the femoral artery was fully preserved. In 4‐week‐old mice, glycocalyx coverage was reduced and endothelial stiffness was increased, whereas glycocalyx length was significantly decreased at 8 weeks of age. Early changes in endothelial function were also featured by increased plasma concentration of biomarkers of glycocalyx disruption (endocan), biomarkers of endothelial inflammation (soluble vascular cell adhesion molecule 1), increased vascular permeability (angiopoietin 2), and alterations in hemostasis (tissue plasminogen activator and plasminogen activator inhibitor 1). In 28‐week‐old mice, at the stage of advanced atherosclerotic plaque development, impaired NO production and nearly all other features of endothelial dysfunction were changed to a similar extent, compared with the preatherosclerotic plaque phase. The exceptions were the occurrence of acetylcholine‐induced vasoconstriction in the aorta and brachiocephalic artery, impaired flow‐mediated vasodilation in the femoral artery, and further reduction of glycocalyx length and coverage with a concomitant further increase in endothelial permeability. Conclusions In conclusion, even at the early stage before the development of atherosclerotic plaques, endothelial dysfunction is a complex multifactorial response that has not been previously appreciated.

Introduction The tumor-promoting rearrangement of the lungs facilitates the process of cancer cell survival in a foreign microenvironment and enables their protection against immune defense. The study aimed to define the fingerprint of the early rearrangement of the lungs via the proteomic profiling of the lung tissue in the experimental model of tumor metastasis in a murine 4T1 mammary adenocarcinoma. Materials and methods The studies were performed on 7-8-week-old BALB/c female mice. Viable 4T1 cancer cells were orthotopically inoculated into the right mammary fat pad. The experiment was performed in the early phase of the tumor metastasis one and two weeks after cancer cell inoculation. The comparative analysis of protein profiles was carried out with the aid of the two-dimensional difference in gel electrophoresis (2D-DIGE). Proteins, of which expression differed significantly, were identified using nano-liquid chromatography coupled to a high-resolution mass spectrometry (nanoLC/hybrid ion trap- Orbitrap XL Discovery). Results Palpable primary tumors were noted in the 2nd week after cancer cell inoculation. The investigated period preceded the formation of numerous macrometastases in the lungs, however the metastasis-promoting changes were visible very early. Primary tumor-induced inflammation developed in the lungs as early as after the 1st week and progressed during the 2nd week, accompanied by increased concentration of 2-OH-E+, an oxidative stress marker, and imbalance in nitric oxide metabolites, pointing to endothelium dysfunction. The early proteomic changes in the lungs in the 1st week after 4T1 cell inoculation resulted in the reorganization of lung tissue structure [actin, cytoplasmic 1 (Actb), tubulin beta chain (Tubb5), lamin-B1 (Lmnb1), serine protease inhibitor A3K (Serpina3k)] and activation of defense mechanisms [selenium-binding protein 1 (Selenbp1), endoplasmin (Hsp90b1), stress 70 protein, mitochondrial (Hspa9), heat shock protein HSP 90-beta (Hsp90ab1)], but also modifications in metabolic pathways [glucose-6-phosphate 1-dehydrogenase X (G6pdx), ATP synthase subunit beta, mitochondrial (Atp5b), L-lactate dehydrogenase B chain (Ldhb)]. Further development of the solid tumor after the 2nd week following cancer cell inoculation, secretion of prolific tumor-derived factors as well as the presence of the increasing number of circulating cancer cells and extravasation processes further impose reorganization of the lung tissue [Actb, vimentin (Vim), clathrin light chain A (Clta)], altering additional metabolic pathways [annexin A5 (Anxa5), Rho GDP-dissociation inhibitor 2 (Arhgdib), complement 1 Q subcomponent-binding protein, mitochondrial (C1qbp), 14-3-3 protein zeta/delta (Ywhaz), peroxiredoxin-6 (Prdx6), chitinase-like protein 4 (Chi3l4), reticulocalbin-1 (Rcn1), EF-hand domain-containing protein D2 (Efhd2), calumenin (Calu)]. Interestingly, many of differentially expressed proteins were involved in calcium homeostasis (Rcn1, Efhd2, Calu, Actb, Vim, Lmnb1, Clta, Tubb5, Serpina3k, Hsp90b1, Hsp90ab1, Hspa9. G6pdx, Atp5b, Anxa5, Arhgdib, Ywhaz). Conclusion The analysis enabled revealing the importance of calcium signaling during the early phase of metastasis development, early cytoskeleton and extracellular matrix reorganization, activation of defense mechanisms and metabolic adaptations. It seems that the tissue response is an interplay between pro- and anti-metastatic mechanisms accompanied by inflammation, oxidative stress and dysfunction of the barrier endothelial cells.

The paper presents the maturity curve for estimating the in-place early-age compressive strength of concrete. The development of appropriate maturity curve is a complex process. It is important to correctly determine the datum temperature and activation energy, which can be obtained in mortar tests. This paper describes an investigation of the accuracy of the maturity method to estimate the strength when different way to rate constant and maturity function are analysed. High performance concrete used for construction of extradosed bridge was tested. The developed curve was implemented to predict the concrete strength at three construction stages, in summer, autumn and early spring.

technologia betonu, betony lekkie, beton architektoniczny, fibrobetony, beton podwodny, produkcja betonu

The endothelium plays an important role in cancer metastasis, but the mechanisms involved are still not clear. In the present work, we characterised the changes in endothelial function at early and late stages of breast cancer progression in an orthotopic model of murine mammary carcinoma (4T1 cells). Endothelial function was analysed based on simultaneous microflow liquid chromatography–tandem mass spectrometry using multiple reaction monitoring (microLC/MS-MRM) quantification of 12 endothelium-related biomarkers, including those reflecting glycocalyx disruption – syndecan-1 (SDC-1), endocan (ESM-1); endothelial inflammation – vascular cell adhesion molecule 1 (VCAM-1), intercellular adhesion molecule 1 (ICAM-1), E-selectin (E-sel); endothelial permeability – fms-like tyrosine kinase 1 (FLT-1), angiopoietin 2 (Angpt-2); and haemostasis – von Willebrand factor (vWF), tissue plasminogen activator (t-PA), plasminogen activator inhibitor 1 (PAI-1), as well as those that are pathophysiologically linked to endothelial function – adrenomedullin (ADM) and adiponectin (ADN). The early phase of metastasis in mouse plasma was associated with glycocalyx disruption (increased SDC-1 and ESM-1), endothelial inflammation [increased soluble VCAM-1 (sVCAM-1)] and increased vascular permeability (Angpt-2). During the late phase of metastasis, additional alterations in haemostasis (increased PAI-1 and vWF), as well as a rise in ADM and substantial fall in ADN concentration, were observed. In conclusion, in a murine model of breast cancer metastasis, we identified glycocalyx disruption, endothelial inflammation and increased endothelial permeability as important events in early metastasis, while the late phase of metastasis was additionally characterised by alterations in haemostasis., Summary: A microLC/MS-MRM-based approach for simultaneous determination of endothelium-related biomarkers identified glycocalyx disruption, endothelial inflammation and increased endothelial permeability as important events in early pulmonary metastasis in a murine model of breast cancer metastasis.

The paper presents studies of a ready-mix concrete containing polymer fibres of three different lengths: 24, 38 and 54 mm. The performed tests allowed to determine the effect of fibre volume fraction and length on the concrete strength. The basic parameters of concrete mixture (consistency, air content and bulk density) were identified. Fibre reinforced concrete belongs to a group of composite materials. The polymer fibres are applied in the concrete in structures where the reduction of shrinkage cracking as well as corrosion resistance and fire temperatures are required. It is widely known, that the cracking behaviour of concrete structures depends on flexural tensile strength of concrete. The addition of fibres significantly improves the tensile strength. The experimental study, including axial compressive strength and center-point loading flexural tensile strength, was carried out. The scope of the research was also expanded by the usage of a scanning microscope. The test results showed the effect of fibre length and fibre combinations on mechanical properties of concrete. The effect of the research is to formulate guidelines due to the quantity of macro polymer fibres. In general, appropriate fibre content brings a beneficial effect e.g. improves better workability of a concrete mixture.

The objective of this study was to develop and validate the method based on micro-liquid chromatography-tandem mass spectrometry (microLC/MS-MRM) for simultaneous determination of adiponectin (ADN), von Willebrand factor (vWF), soluble form of vascular cell adhesion molecule 1 (sVCAM-1), soluble form of intercellular adhesion molecule 1 (sICAM-1) and syndecan-1 (SDC-1) in mouse plasma. The calibration range was established from 2.5pmol/mL to 5000pmol/mL for ADN; 5pmol/mL to 5000pmol/mL for vWF; 0.375pmol/mL to 250pmol/mL for sVCAM-1 and sICAM-1; and 0.25pmol/mL to 250pmol/mL for SDC-1. The method was applied to measure the plasma concentration of selected proteins in mice fed high-fat diet (HFD), and revealed the pro-thrombotic status by increased concentration of vWF (1.31$\pm$0.17 nmol/mL (Control) vs 1.98$\pm$0.09 nmol/mL (HFD), p

This paper presents the first analysis of spectroscopic and photometric observations of the eclipsing binary star NR Peg. ELODIE H α observations indicate that the secondary component is a chromospherically active star; however, the spectral line profiles (especially of neutral metals) of NR Peg are very wide and have a complex structure with asymmetric bubbles on its branches, which could be interpreted as traces of stellar magnetic activity in both components. The 2007 and 2008 BVR light curves are generally those of β Lyrae-type eclipsing binaries, however, there are large asymmetries between maxima. We explained these peculiar asymmetries in terms of large dark spots on the primary component. ELODIE spectroscopic data and 2008 BVR light curves were solved simultaneously using Wilson–Devinney code. The results describe NR Peg as a RS CVn type binary star with a semi-detached configuration. The masses of the components were found to be 1.60 ± 0.03 M ⊙ and 0.57 ± 0.02 M ⊙ and the radii to be 3.35 ± 0.07 R ⊙ and 3.55 ± 0.08 R ⊙ for the primary and secondary components, respectively. Both components of NR Peg appear to have evolved behind the terminal age main sequence. However, the less-massive secondary component is significantly oversized and overluminous compared to theoretical evolution models. The distance of NR Peg was calculated as 138 ± 12 pc, taking into account interstellar extinction, in agreement with the HIPPARCOS value.