Search

The atmospheric concentration of CFC-11 (CCl3F) has declined in response to the phase-out of its production by the Montreal Protocol. Nevertheless, this atmospheric concentration decline suffered a slow-down around 2012 due to emissions from non-reported production. Since CFC-11 is one of the most important ozone-depleting chlorofluorocarbons (CFCs), its continuous monitoring is essential. We present the CFC-11 total column time series (2000-2020) retrieved in a consistent way from ground-based high-resolution solar absorption Fourier transform infrared (FTIR) spectra. These observations were recorded at two remote stations of the Network for the Detection of Atmospheric Composition Change (NDACC): the Jungfraujoch station (Northern Hemisphere) and the Lauder station (Southern Hemisphere). These time series are new. They were produced using improved line parameters and merged considering the instrument changes and setup modifications. Afterwards, they were compared with Cape Grim station in situ surface observations conducted within the Advanced Global Atmospheric Gases Experiment (AGAGE) network and with total column datasets calculated by the TOMCAT/SLIMCAT 3-D chemical transport model. Trend analyses were performed, using an advanced statistical tool, in order to identify the timing and magnitude of the trend change in both hemispheres. The observations are consistent with the model results and confirm the slowdown in the CFC-11 atmospheric concentration decay, since ≈2011 in the Northern Hemisphere, and since ≈2014 in the Southern Hemisphere.

The likelihood of threatening events is often simplified for members of the public and presented as risk categories such as the “watches” and “warnings” currently issued by National Weather Service in the United States. However, research (e.g., Joslyn and LeClerc) suggests that explicit numeric uncertainty information—for example, 30%—improves people’s understanding as well as their decisions. Whether this benefit extends to dynamic situations in which users must process multiple forecast updates is as yet unknown. It may be that other likelihood expressions, such as color coding, are required under those circumstances. The experimental study reported here compared the effect of the categorical expressions “watches” and “warnings” with both color-coded and numeric percent chance expressions of the likelihood of a tornado in a situation with multiple updates. Participants decided whether and when to take shelter to protect themselves from a tornado on each of 40 trials, each with seven updated tornado forecasts. Understanding, decision quality, and trust were highest in conditions that provided percent chance information. Color-coded likelihood information inspired the least trust and led to the greatest overestimation of likelihood and confusion with severity information of all expressions.

Ground-based observations are indispensable for the long-term monitoring of atmospheric constituents. In this work, we take advantage of multiple collocated instruments to analyze potential biases and drifts in ground-based ozone observations, within the context of the HEGIFTOM (Harmonization and Evaluation of Ground-based Instruments for Free Tropospheric Ozone Measurements) working group in the Tropospheric Ozone Assessment Report, Phase II (TOAR-II). This work is performed at Lauder (New Zealand), Boulder (Colorado), and Mauna Loa (Hawaii) where comparisons are made between Fourier Transform Infrared (FTIR) spectroscopy, Dobson Umkehr, and ozonesonde observations. The validation is performed with respect to FTIR as arbitrary reference, while considering the differences between the a priori profile information for the techniques that employ these as well as accounting for the different vertical resolution of each measurement technique. Such intercomparison is done for a handful discrete altitude partial columns, defined to have independent pieces of information also in the case of the low vertical resolution techniques (FTIR and Umkehr). This leads to 4 independent vertical layers to be compared, including one in the troposphere where ozone plays an important role as a greenhouse gas and as a risk to human health. In this tropospheric layer we compare the FTIR, Dobson Umkehr and ozonesonde techniques and derive a consistent bias from the FTIR data of about 5%, which we attribute in part to the assumed spectroscopy. Fitting the time series of the relative measurement differences using multiple linear regression, we obtain a linear trend, which quantifies the drift between pairs of techniques. Within the uncertainties, we find no significant drift between FTIR and Umkehr or ozone sonde data in the troposphere.

supplemental figure legend

Supplemental Figure 2. Testing of different concentrations of agonist anti-4-1BB antibody added to melanoma tumor fragment cultures.

Supplemental Figure 1. Detection of 4-1BB on CD8+ T cells within fresh melanoma tumor fragments and in early tumor fragment cultures.

Purpose: Cultured tumor fragments from melanoma metastases have been used for years as a source of tumor-infiltrating lymphocytes (TIL) for adoptive cell therapy (ACT). The expansion of tumor-reactive CD8+ T cells with interleukin-2 (IL2) in these early cultures is critical in generating clinically active TIL infusion products, with a population of activated 4-1BB CD8+ T cells recently found to constitute the majority of tumor-specific T cells.Experimental Design: We used an agonistic anti–4-1BB antibody added during the initial tumor fragment cultures to provide in situ 4-1BB costimulation.Results: We found that addition of an agonistic anti–4-1BB antibody could activate 4-1BB signaling within early cultured tumor fragments and accelerated the rate of memory CD8+ TIL outgrowth that were highly enriched for melanoma antigen specificity. This was associated with NFκB activation and the induction of T-cell survival and memory genes, as well as enhanced IL2 responsiveness, in the CD8+ T cells in the fragments and emerging from the fragments. Early provision of 4-1BB costimulation also affected the dendritic cells (DC) by activating NFκB in DC and promoting their maturation inside the tumor fragments. Blocking HLA class I prevented the enhanced outgrowth of CD8+ T cells with anti–4-1BB, suggesting that an ongoing HLA class I–mediated antigen presentation in early tumor fragment cultures plays a role in mediating tumor-specific CD8+ TIL outgrowth.Conclusions: Our results highlight a previously unrecognized concept in TIL ACT that the tumor microenvironment can be dynamically regulated in the initial tumor fragment cultures to regulate the types of T cells expanded and their functional characteristics. Clin Cancer Res; 21(3); 611–21. ©2014 AACR.

PDF file - 159K

XLS file 3927K, STK33 enzymatic activity and cellular activities for molecules a-l from Figure 6E

PDF file - 7714K

XLS file - 175K, Effects of 515 small molecules on STK33 enzymatic activity vs. phosphorylation of RPS6 in cell lines

PDF file - 119K

Background Bariatric surgery can influence the presentation, diagnosis, and management of gastrointestinal cancers. Oesophago-Gastric (OG) malignancies in patients who have had a prior bariatric procedure have not been fully characterised. Objective To characterise OG malignancies after bariatric procedures. Setting University Hospital, United Kingdom. Methods We performed a retrospective, multi-centre observational study of patients with OG malignancies after bariatric surgery to characterise this condition. Results This study includes 170 patients from 75 centres in 25 countries who underwent bariatric procedures between 1985 and 2020. At the time of the bariatric procedure, the mean age was 50.2 ± 10 years and the mean weight 128.8 ± 28.9 kg. Females comprised 57.3% (n=98) of the population. Most (n=64) patients underwent a Roux-en-Y Gastric Bypass (RYGB) followed by Adjustable Gastric Band (AGB) (n = 46) and Sleeve Gastrectomy (SG) (n = 43). Time to cancer diagnosis after bariatric surgery was 9.5 ± 7.4 years and mean weight at diagnosis was 87.4 ± 21.9 kg. The time lag was 5.9 ± 4.1 years after SG compared to 9.4 ± 7.1 years after RYGB and 10.5 ± 5.7 years after AGB. One-third of patients presented with metastatic disease. The majority of tumours were adenocarcinoma (82.9%). Approximately 1 in 5 patients underwent palliative treatment from the outset. Time from diagnosis to mortality was under one year for most patients who died over the intervening period. Conclusions The OGMOS (Oesophago-Gastric Malignancies after Obesity/ Bariatric Surgery) study presents the largest series to date of patients developing OG malignancies after bariatric surgery and attempts to characterise this condition.

There are lingering questions about the effectiveness of the watch, warning, and advisory system (WWA) used to convey weather threats in the United States. Recently there has been a shift toward alternative communication strategies such as the impact-based forecast. The study reported here compared users’ interpretation of a color-coded impact-based prototype designed for email briefings, to a legacy WWA format. Participants, including emergency managers and members of the public, saw a weather briefing and rated event likelihood, severity, damage, and population affected. Then they recommended emergency response actions. Each briefing described the severity of the weather event and the degree of impact on population and property. In one condition a color-coded impacts scale was added to the text description. In another, an advisory and/or warning was added to the text description. These were compared with the text-only control. Both emergency managers and members of the public provided higher ratings for event likelihood, severity, damage, and population affected and recommended a greater response for higher impact levels regardless of format. For both groups, the color-coded format decreased ratings for lower-impact events. Among members of the public, the color-coded format also led to increases for many ratings and greater response at higher levels relative to the other two conditions. However, the highest ratings among members of the public were in the WWA condition. Somewhat surprisingly, the only effect of the WWA format on emergency managers was to reduce action recommendations, probably because of the inclusion of the “advisory” in some briefings.

In this article the Table 3 with SD± was not properly adjusted. The original article has been corrected.

A total of 120,000 tonnes per year of crop waste from contaminated land has been used as a feedstock for anaerobic digestion (AD). This produces only around 20% of biogas from the total crop and results in a large amount of digestate with heavy metal content. This crop digestate was analyzed across a calendar year to identify the variation in composition, and any potential high-value components that could be targeted for recovery. The chemical characterization revealed that approximately 65% of this residual waste is lignocellulosic material (20% hemicellulose, 24% cellulose, 24% lignin) and about 10% is ash, with no observable difference across the seasons. Three different pyrolysis technologies were studied with the same crop digestate as alternative route to maximize the value of this solid residue by transforming this lignocellulosic material into further bio-based products. Slow pyrolysis at operating temperatures between 355 and 530 °C resulted in bio-oil yields of 35–46% wt, fast pyrolysis at 460–560 °C produced 36–40% wt, and microwave pyrolysis using a power input of 500 and 700 W generated 8–27% wt from the digestate. Chemical compounds found in these bio-oils were categorized into seven chemical groups: acids, aldehydes and ketones, alcohols, furans, sugars, phenolics, and others. This analytical study opens other scenarios to explore the upgrading of these pyrolytic bio-oils for green product generation from the same waste. Graphical Abstract

This is an Accepted Manuscript of an article published by Taylor & Francis in Biodiversity on 2023-01-09, available online: https://www.tandfonline.com/10.1080/14888386.2022.2150313. Deposited by shareyourpaper.org and openaccessbutton.org. We've taken reasonable steps to ensure this content doesn't violate copyright. However, if you think it does you can request a takedown by emailing help@openaccessbutton.org.

Background Cerebral small vessel disease is associated with higher ratios of soluble‐epoxide hydrolase derived linoleic acid diols (12,13‐dihydroxyoctadecenoic acid [DiHOME] and 9,10‐DiHOME) to their parent epoxides (12(13)‐epoxyoctadecenoic acid [EpOME] and 9(10)‐EpOME); however, the relationship has not yet been examined in stroke. Methods and Results Participants with mild to moderate small vessel stroke or large vessel stroke were selected based on clinical and imaging criteria. Metabolites were quantified by ultra‐high‐performance liquid chromatography–mass spectrometry. Volumes of stroke, lacunes, white matter hyperintensities, magnetic resonance imaging visible perivascular spaces, and free water diffusion were quantified from structural and diffusion magnetic resonance imaging (3 Tesla). Adjusted linear regression models were used for analysis. Compared with participants with large vessel stroke (n=30), participants with small vessel stroke (n=50) had a higher 12,13‐DiHOME/12(13)‐EpOME ratio (β=0.251, P =0.023). The 12,13‐DiHOME/12(13)‐EpOME ratio was associated with more lacunes (β=0.266, P =0.028) but not with large vessel stroke volumes. Ratios of 12,13‐DiHOME/12(13)‐EpOME and 9,10‐DiHOME/9(10)‐EpOME were associated with greater volumes of white matter hyperintensities (β=0.364, P P P =0.011; β=0.314, P =0.006). In small vessel stroke, the 12,13‐DiHOME/12(13)‐EpOME ratio was associated with higher white matter free water diffusion (β=0.439, P =0.016), which was specific to the temporal lobe in exploratory regional analyses. The 9,10‐DiHOME/9(10)‐EpOME ratio was associated with temporal lobe atrophy (β=−0.277, P =0.031). Conclusions Linoleic acid markers of cytochrome P450/soluble‐epoxide hydrolase activity were associated with small versus large vessel stroke, with small vessel disease markers consistent with blood brain barrier and neurovascular‐glial disruption, and temporal lobe atrophy. The findings may indicate a novel modifiable risk factor for small vessel disease and related neurodegeneration.

Steels studs are an inevitable part of drywall construction as they are lightweight and offer the required structural stability. However, the studs act as sound bridges between the plasterboards reducing the overall sound insulation of the wall. Overcoming this often calls for wider cavity walls and complex stud decoupling fixtures that increase the installation cost while reducing the floor area. As an alternative approach, this research reveals the potential of perforated studs to improve the acoustic insulation of drywall partitions. The acoustic and structural performance is characterized using a validated finite element model that acted as a prediction tool in reducing the number of physical tests required. The results established that an acoustic numerical model featuring fluid-structure-interaction can predict the weighted sound reduction index of a stud wall assembly at an accuracy of ±1 dB. The model was used to analyze six perforated stud designs and found to outperform the sound insulation of non-perforated drywall partitions by reducing the sound bridging. Overall, the best performing perforated stud design was found to offer improvements in acoustic insulation of up to 4 dB, while being structurally compliant.

Purpose The COVID-19 pandemic emphasises the need for antiviral materials that can reduce airborne and surface-based virus transmission. This study aims to propose the use of additive manufacturing (AM) and surrogate modelling for the rapid development and deployment of novel copper-tungsten-silver (Cu-W-Ag) microporous architecture that shows strong antiviral behaviour against severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Design/methodology/approach The research combines selective laser melting (SLM), in-situ alloying and surrogate modelling to conceive the antiviral Cu-W-Ag architecture. The approach is shown to be suitable for redistributed manufacturing by representing the pore morphology through a surrogate model that parametrically manipulates the SLM process parameters: hatch distance (h_d), scan speed (S_s) and laser power (L_p). The method drastically simplifies the three-dimensional (3D) printing of microporous materials by requiring only global geometrical dimensions solving current bottlenecks associated with high computed aided design data transfer required for the AM of porous materials. Findings The surrogate model developed in this study achieved an optimum parametric combination that resulted in microporous Cu-W-Ag with average pore sizes of 80 µm. Subsequent antiviral evaluation of the optimum architecture showed 100% viral inactivation within 5 h against a biosafe enveloped ribonucleic acid viral model of SARS-CoV-2. Research limitations/implications The Cu-W-Ag architecture is suitable for redistributed manufacturing and can help reduce surface contamination of SARS-CoV-2. Nevertheless, further optimisation may improve the virus inactivation time. Practical implications The study was extended to demonstrate an open-source 3D printed Cu-W-Ag antiviral mask filter prototype. Social implications The evolving nature of the COVID-19 pandemic brings new and unpredictable challenges where redistributed manufacturing of 3D printed antiviral materials can achieve rapid solutions. Originality/value The papers present for the first time a methodology to digitally conceive and print-on-demand a novel Cu-W-Ag alloy that shows high antiviral behaviour against SARS-CoV-2.

The purpose of this study was to introduce a continuous quality improvement (CQI) program for radiation dose optimisation during uterine artery embolisation (UAE) and assess its impact on dose reduction and image quality. The CQI program investigated the effects of optimising radiation dose parameters on the kerma-area product (KAP) and image quality when comparing a ‘CQI intervention’ group (n = 50) and ‘Control’ group (n = 50). Visual grading characteristics (VGC) analysis was used to assess image quality, using the ‘Control’ group as a reference. A significant reduction in KAP by 17% (P = 0.041, d = 0.2) and reference air kerma (Ka, r) by 20% (P = 0.027, d = 0.2) was shown between the two groups. The VGC analysis resulted in an area under the VGC curve (AUCVGC) of 0.54, indicating no significant difference in image quality between the two groups (P = 0.670). The implementation of the CQI program and optimisation of radiation dose parameters improved the UAE radiation dose practices at our centre. The dose reduction demonstrated no detrimental effects on image quality.

Introduction The incidence of obesity has been steadily rising over the last few decades and is having a significant impact upon the health system. In radiography, a particular challenge of imaging obese patients is implementing the as low as reasonably achievable (ALARA) principle when determining radiation dose, and technical and patient-care adaptations. This study aimed to better understand the decision-making strategies of experienced radiographers in determining imaging and exposure factor selection in the context of imaging obese patients. Methods This study employed a 'think-aloud,' methodology, and eight experienced diagnostic radiographers working in clinical education were recruited to perform routine AP abdominal X-ray projections on an anthropomorphic phantom. They were asked to simultaneously verbalise emerging thoughts as they considered positioning, exposure selection and image evaluation. This process was repeated with three different phantom sizes, each representing an increased BMI from 'healthy,' to, 'morbidly obese.' Audio recordings were transcribed and interpreted via Bowman's (1997) theory of radiographic judgement and decision-making. Results Analysis of interview transcripts identified 12 key concepts considered by experienced radiographers. Differences in radiographic concepts were considered when imaging phantoms of different sizes was demonstrated. A shift from segmental (e.g. positioning) to more environmental factors (e.g. patient comfort) and an increase in the number of verbal considerations with increasing phantom size were identified. The shift in focus of decision-making stages identified the greater need to consider contextual factors such as patient comfort and repeatability when imaging obese patients. Conclusion Experienced radiographers find imaging obese patients challenging and alter their perception of image quality to accommodate for patient presentation. The findings will help inform future research, practice guidelines and learning resources to provide optimal imaging and care for obese patients, especially for student education.

Selective Laser Melting (SLM) is an emerging Additive Manufacturing (AM) technique for the on-demand fabrication of metal parts. The mechanical properties of Selectively Laser Melted (SLMed) parts are sensitive to oxygen concentration within the SLM build chamber due to the formation of oxides, which may lead to various negative consequences. As such, this work explores the influence of SLM atmospheric Oxygen Content (OC) on the macroscopic mechanical properties of SLMed AlSi10Mg bulk material and Triply Periodic Minimal Surface (TPMS) lattices namely primitive, gyroid, and diamond. Standard quasi-static tensile and crushing tests were conducted to evaluate the bulk properties of AlSi10Mg and the compressive metrics of TPMS-lattices. Two oxygen concentrations of 100 ppm and 1000 were used during the SLM fabrication of the experimental specimens. The tensile test data revealed a small influence of the oxygen content on the bulk properties. The low oxygen concentration improved the elongation while slightly reduced the ultimate tensile strength and yield stress. Similarly, the influence of the oxygen content on the compressive responses of TPMS-lattices was generally limited and primarily depended on their geometrical configuration. This study elucidates the role of SLM atmospheric oxygen content on the macroscopic behaviour of SLMed AlSi10Mg parts.