Search

An eight element, compact Ultra Wideband-Multiple Input Multiple Output (UWB-MIMO) antenna capable of providing high data rates for future Fifth Generation (5G) terminal equipments along with the provision of necessary bandwidth for Third Generation (3G) and Fourth Generation (4G) communications that accomplishes band rejection from 4.85 to 6.35 GHz by deploying a Inductor Capacitor (LC) stub on the ground plane is presented. The incorporated stub also provides flexibility to reject any selected band as well as bandwidth control. The orthogonal placement of the printed monopoles permits polarization diversity and provides high isolation. In the proposed eight element UWB-MIMO/diversity antenna, monopole pair 3-4 are 180o mirrored transform of monopole pair 1-2 which lie on the opposite corners of a planar 50 x 50 mm2 substrate. Four additional monopoles are then placed perpendicularly to the same board leading to a total size of 50 x 50 x 25 mm3 only. The simulated results are validated by comparing the measurements of a fabricated prototype. It was concluded that the design meets the target specifications over the entire bandwidth of 2 to 12 GHz with a reflection coefficient better than -10 dB (except the rejected band), isolation more than 17 dB, low envelope correlation, low gain variation, stable radiation pattern, and strong rejection of the signals in the Wireless Local Area Network (WLAN) band. Overall, compact and reduced complexity of the proposed eight element architecture, strengthens its practical viability for the diversity applications in future 5G terminal equipments amongst other MIMO antennas designs present in the literature., Comment: 25 pages

This paper reports on a novel technique of switching radiation characteristics electronically between E-and H-planes of planar Substrate Integrated Waveguide Leaky Wave Antennas (SIW-LWAs). The leaky wave mode is achieved through increasing the pitch of bounding metallic via posts on one side of SIW transmission section. The radiation switching is achieved by extending the top and bottom metallic planes to a distance of 1 mm along the leakage side. The extended section acts as a parallel plate section which is conveniently connected or disconnected from the leaking side of SIW through PIN diodes. The ‘ON’ state of PIN diodes extends the metal guides and results in the H-plane leakage whereas ‘OFF’ state of PIN diodes truncates the extended metal earlier and alter the leakage line boundary condition towards E-plane. The whole concept is validated by series of simulations followed by the realization and testing of the SIW-LWA. The measured radiation pattern scans about 54° in the E-plane between 10.0 GHz to 11.7 GHz, and 58° in the H-plane from 9 GHz to 10.6 GHz. The proposed topology is a suitable candidate for remote sensing and airborne applications.