Search

Many precision applications in the mid-infrared spectral range have strong constraints based on quantum effects that are expressed in particular noise characteristics. They limit, e.g., sensitivity and resolution of mid-infrared imaging and spectroscopic systems as well as the bit-error rate in optical free-space communication. Interband cascade lasers (ICLs) are a class of mid-infrared laser exploiting interband transitions in type-II band alignment geometry. They are currently gaining significant importance for mid-infrared applications from 6 {\mu}m wavelength, enabled by novel types of high-performance ICLs such as ring-cavity devices. Their noise-behavior is an important feature that still needs to be thoroughly analyzed, including its potential reduction with respect to the shot noise limit. In this work, we provide a comprehensive characterization of {\lambda} = 3.8 {\mu}m-emitting, continuous-wave ring-ICLs operating at room temperature. It is based on an in-depth study of their main physical intensity noise features, such as their bias-dependent intensity noise power spectral density (INPSD) and relative intensity noise (RIN). We obtain shot-noise-limited statistics for Fourier frequencies above 100 kHz. This is an important result for precision applications, e.g. interferometry or advanced spectroscopy, which benefit from exploiting the advantage of using such a shot-noise limited source, enhancing the setup sensitivity. Moreover, it is an important feature for novel quantum optics schemes including testing specific light states below the shot noise level, such as squeezed states.

Long-wave infrared (LWIR, 8-14 um) photonics is a rapidly growing research field within the mid-IR with applications in molecular spectroscopy and optical free-space communication. LWIR-applications are often addressed using rather bulky tabletop-sized free-space optical systems, preventing advanced photonic applications such as rapid-time-scale experiments. Here, device miniaturization into photonic integrated circuits (PICs) with maintained optical capabilities is key to revolutionize mid-IR photonics. Sub-wavelength mode confinement in plasmonic structures enabled such miniaturization approaches in the visible-to-near-IR spectral range. However, adopting plasmonics for the LWIR needs suitable low-loss and -dispersion materials with compatible integration strategies to existing mid-IR technology. In this work we further unlock the field of LWIR/mid-IR PICs, by combining photolithographic patterning of organic polymers with dielectric-loaded surface plasmon polariton (DLSPP) waveguides. In particular, polyethylene shows favorable optical properties, including low refractive index and broad transparency between ~2-200 um. We investigate the whole value chain, including design, fabrication, and characterization of polyethylene-based DLSPP waveguides and demonstrate their first-time plasmonic operation and mode guiding capabilities along s-bend structures. Low bending losses of ~1.3 dB and straight-section propagation lengths of ~1 mm, pave the way for unprecedented, complex on-chip mid-IR photonic devices. Moreover, DLSPPs allow full control of the mode parameters (propagation length and guiding capabilities) for precisely addressing advanced sensing and telecommunication applications with chip-scale devices.

Mid-infrared attenuated total reflection (ATR) spectroscopy is a powerful tool for in situ monitoring of various processes. Mesoporous silica, an extensively studied material, has already been applied in sensing schemes due to its high surface area and tunable surface chemistry. However, its poor chemical stability in aqueous solutions at pH values higher than 8 and strong absorption below 1250 cm−1 limits its range of applications. To circumvent these problems, a mesoporous zirconia coating on ATR crystals was developed. Herein, the synthesis, surface modification, and characterization of ordered mesoporous zirconia films on Si wafers and Si-ATR crystals are presented. The modified coating was applied in sensing schemes using aromatic and aliphatic nitriles in aqueous solution as organic pollutants. The mesoporous zirconia coating shows strong chemical resistance when kept in alkaline solution for 72 h. The success of surface modification is confirmed using Fourier transform infrared (FT-IR) spectroscopy and contact angle measurements. Benzonitrile and valeronitrile in water are used as model analytes to evaluate the enrichment performance of the film. The experimental results are fitted using Freundlich isotherms, and enrichment factors of 162 and 26 are calculated for 10 mg L−1 benzonitrile and 25 mg L−1 valeronitrile in water, respectively. Limits of detection of 1 mg L−1 for benzonitrile and 11 mg L−1 for valeronitrile are obtained. The high chemical stability of this coating allows application in diverse fields such as catalysis with the possibility of in situ monitoring using FT-IR spectroscopy.

Supporting Information

Optical frequency combs generated by quantum cascade lasers have recently been demonstrated in the mid and far infrared, but a detailed analysis of the possibility of a fine control of the emission to use them for high-resolution spectroscopy and metrology applications is still missing. In this manuscript the attempt of frequency stabilizing a mid-infrared quantum cascade laser comb (QCL-comb) against a metrological mid-infrared intracavity-difference-frequency-generated comb through a single phase-locking chain acting on the driving current is presented. Following a brief derivation, simple relations between the QCL-comb frequency parameters and optical quantities such as the refractive index have been found and used to observe how the locking affects the physics of the system. The conclusion is that the current locking essentially acts on the effective refractive index to reduce the offset fluctuations (common noise), but does not sensitively affect the group refractive index and the mode spacing. Nonetheless, the overall single QCL-comb tooth linewidth is reduced from 500kHz down to values ranging from 1 to 23kHz on a 40ms time scale.