Search

In order to solve the problem of heat dissipation of permanent magnet synchronous motors, a technology using the principle of nanofluid electrochemistry is proposed. The main content of this technology is based on the characteristics and applications of nanofluids; according to the experimental system, the preparation and experimental parameters of nanofluids were determined; finally, by studying the influence of ultrasonic oscillation time and dispersant on the stability of nanofluids, it was concluded that the improvement of the thermal conductivity of nanofluids contributed to the improvement of the heat transfer rate of nanofluids. Experimental results show that when the volume fraction is 0.5, the increase rate of thermal conductivity is 1.51, the increase rate of convective heat transfer coefficient is 20.33, and the increase rate of convective heat transfer coefficient is greater than that of thermal conductivity, which shows that nanofluids have very good heat dissipation ability. It is proved that the technical research of nanofluid can meet the heat dissipation requirements of a permanent magnet synchronous motor.

This work presents the development of the translation component in a multistage, multilevel, multimode, multilingual and dynamic deliberative (M4D2) system, built to facilitate automated moderation and translation in the languages of five European countries: Italy, Ireland, Germany, France and Poland. Two main topics were to be addressed in the deliberation process: (i) the environment and climate change; and (ii) the economy and inequality. In this work, we describe the development of neural machine translation (NMT) models for these domains for six European languages: Italian, English (included as the second official language of Ireland), Irish, German, French and Polish. As a result, we generate 30 NMT models, initially baseline systems built using freely available online data, which are then adapted to the domains of interest in the project by (i) filtering the corpora, (ii) tuning the systems with automatically extracted in-domain development datasets and (iii) using corpus concatenation techniques to expand the amount of data available. We compare our results produced by the domain-adapted systems with those produced by Google Translate, and demonstrate that fast, high-quality systems can be produced that facilitate multilingual deliberation in a secure environment.

We introduce a study examining people’s privacy concerns in the time of Covid-19 and we reflect on people’s willingness to share their personal data in the interest of controlling the spread of the virus and save lives.

Investigating the phosphors doped with single activators in a single component to realize white-light emission is urgently desired for phosphor-converted white-light-emitting diodes. In this work, on the basis of the chemical unit cosubstitution strategy, the new borophosphate phosphors Ba

This research focuses on designing methods aimed at assessing Irish public attitudes regarding privacy in COVID-19 times and their influence on the adoption of COVID-19 spread control technology such as the COVID tracker app. The success of such technologies is dependent on their adoption rate and privacy concerns may be a factor delaying or preventing thus adoption. An online questionnaire was built to collect: demographic data, participant's general privacy profile using the Privacy Segmentation Index (PSI) which classifies individuals into 3 groups (privacy fundamentalists, pragmatists, and unconcerned), and the attitudes toward privacy in COVID-19 times. The questionnaire was shared via websites and social networks. The data was collected between 27/08/2020 to 27/9/2020. We received and analysed 258 responses. The initial pilot study found that almost 73% of the respondents were pragmatists or unconcerned about privacy when it came to sharing their private data. Comparable results were obtained with other privacy studies that have employed PSI. The pilot indicates a huge increase, from 12% pre-pandemic to 61% during the pandemic, of people willing to share their data. The questionnaire developed following this study is further used in a national survey on privacy in COVID-19 times.

Nowadays, the object detection techniques have been developed rapidly for different applications, ranging from remote sensing to autonomous vehicles. We demonstrate identification of object open angle and direction using machine learning (ML) algorithms based on received light beam’s intensity profiles. Compared with previous optical orbital-angular-momentum (OAM) spectrum system and other related works, our proposed technique only uses a single-shot image, and can efficiently reduce the complexity of hardware implementation. Specifically, we verify the reliability of the simulation results experimentally for 14 open angles and 32 directions. Experimental result shows that convolutional neural network (CNN) outperforms the other traditional ML algorithms, such as decision tree (DT), k-nearest neighbor algorithm (KNN), and support vector machine (SVM). As one of the variant of CNN, MobileNet (MN) has relatively simplified iteration algorithm than VGG-like net. It reduces the computational power, while still maintaining high accuracy for identification issues.

Contact tracing apps used in tracing and mitigating the spread of COVID-19 have sparked discussions and controversies worldwide with major concerns around privacy. COVID Tracker app used in the Republic of Ireland was praised in general for the way it addressed privacy and was used as baseline for other contact tracing apps worldwide. The success of the app is dependent on the general public uptake, hence their voice and attitude is the one that really matters. This paper focuses on developing a survey and the methods aiming to examine the attitudes toward privacy during COVID-19 of the general public in the Republic of Ireland and their impact on the uptake of the COVID tracker app. Various privacy models are used and health belief model as well in this purpose. A pilot study with 286 participants show a change in attitude towards privacy during COVID-19 pandemic, with more people willing to share their data in the interest of saving lives. However, privacy attitudes are shown to have impacted the adoption of the app in Ireland.

Contact tracing apps used in tracing and mitigating the spread of COVID-19 have sparked discussions and controversies worldwide. The major concerns in relation to these apps are around privacy. Ireland was in general praised for the design of its COVID tracker app, and the transparency through which privacy issues were addressed. However, the ”voice” of the Irish public was not really heard or analysed. This study aimed to analyse the Irish public sentiment towards privacy and COVID tracker app. For this purpose we have conducted sentiment analysis on Twitter data collected from public Twitter accounts from Republic of Ireland. We collected COVID-19 related tweets generated in Ireland over a period of time from January 1, 2020 up to December 31, 2020 in order to perform sentiment analysis on this data set. Moreover, the study performed sentiment analysis on the feedback received from a national survey on privacy conducted in Republic of Ireland. The findings of the study reveal a significant criticism towards the app that relate to privacy concerns, but other aspects of the app as well. The findings also reveal some positive attitude towards the fight against COVID-19, but these are not necessarily related to the technological solutions employed for this purpose. The findings of the study contributed to the formulation of useful recommendations communicated to the relevant Irish actors.

In this letter, we experimentally explore the limited-size aperture effects in an orbital-angular-momentum (OAM)-multiplexed free-space optical (FSO) data link for aerial platforms. 200-Gbit/s data transmission is demonstrated between a ground transmitter and a ground receiver via a flying, retro-reflecting unmanned-aerial-vehicle (UAV) over 100-m round-trip distance by multiplexing two OAM beams. Our results indicate that when the receiver aperture size is limited, both power loss and channel crosstalk would increase. With a receiver aperture diameter of >5 cm, bit error rate (BER) mostly below 3.8 × 10−3 has been achieved for both channels

There has been a growing interest in orbital angular momentum (OAM) multiplexed communication links because of their potential for high capacity data transmission. However, OAM multiplexed communication links are sensitive to various degradation effects, and one of the key challenges is to compensate for the potential intermodal crosstalk. In this chapter, we review the causes and mitigation techniques for channel crosstalk in OAM multiplexed communication links. Specifically: Channel crosstalk in OAM multiplexed links could be caused by various system and environmental effects, such as atmospheric turbulence, misalignment, and obstructions. Three technical topics for crosstalk mitigation, including adaptive optics, spatial mode manipulation, and digital signal processing are discussed in this chapter. Several works within these topics are presented as examples.

We demonstrate a 100-Gb/s/λ 4-ary pulse amplitude modulation (PAM4)-QSFP28 transceiver operated under C-temp range (0 °C -70 °C) and 5.87 W power consumption. A receiver sensitivity of -9.6 dBm is obtained at BER=10-12, and an 80-km C-band SSMF transmission can be reached with high chromatic dispersion tolerance.

MEX-3C, a novel RNA binding E3 ubiquitin ligases, contains two N-terminal heterogeneous nuclear ribonucleoprotein K homology (KH) domains and C-terminal Ring finger domain. Recent evidence has suggested that human MEX-3C has a strong bondage with carcinogenesis and the MEX-3C-mediated ubiquitination of RIG-I is essential for the antiviral innate immune response. Moreover, the Ring finger domain of MEX-3C could regulate the degradation of HLA-A2 (an MHC-I allotype) mRNA with a novel mechanism. However, the structural basis for the ubiquitination catalyzed by hMEX-3C Ring finger domain remains evasive. In this study, we solved the crystal structure of dimeric Ring finger domain of hMEX-3C and compared it with the complex structure of MDM2/MDMX-UbcH5b-Ub. Our ubiquitination assay demonstrated that the Ring finger domain of hMEX-3C acts as a ubiquitin E3 ligase in vitro, cooperating with specific E2 to mediate ubiquitination. Then, we identified several key residues in Ring finger domain of hMEX-3C possibly involved in the interaction with E2-Ub conjugate and analyzed the E3 ligase activities of wild type and mutants at key sites. Additionally, zinc chelation experiments indicated that the intact structural stability is essential for the self-ubiquitination activity of the Ring finger domain of hMEX-3C. Taken together, our studies provided new insight into the mechanism of the Ring finger domain of hMEX-3C that may play an important role in eliciting antiviral immune responses and therapeutic interventions.

In this paper, we review high-capacity underwater optical communications using orbital angular momentum (OAM)-based spatial division multiplexing. We discuss methods to generate and detect blue–green optical data-carrying OAM beams as well as various underwater effects, including attenuation, scattering, current, and thermal gradients on OAM beams. Attention is also given to the system performance of high-capacity underwater optical communication links using OAM-based space division multiplexing. The paper closes with a discussion of a digital signal processing (DSP) algorithm to mitigate the inter-mode crosstalk caused by thermal gradients.

We explore the use of orbital-angular-momentum (OAM)-multiplexing to increase the capacity of free-space data transmission to moving platforms, with an added potential benefit of decreasing the probability of data intercept. Specifically, we experimentally demonstrate and characterize the performance of an OAM-multiplexed, free-space optical (FSO) communications link between a ground transmitter and a ground receiver via a moving unmanned-aerial-vehicle (UAV). We achieve a total capacity of 80 Gbit/s up to 100-m-roundtrip link by multiplexing 2 OAM beams, each carrying a 40-Gbit/s quadrature-phase-shift-keying (QPSK) signal. Moreover, we investigate for static, hovering, and moving conditions the effects of channel impairments, including: misalignments, propeller-induced airflows, power loss, intermodal crosstalk, and system bit error rate (BER). We find the following: (a) when the UAV hovers in the air, the power on the desired mode fluctuates by 2.1 dB, while the crosstalk to the other mode is −19 dB below the power on the desired mode; and (b) when the UAV moves in the air, the power fluctuation on the desired mode increases to 4.3 dB and the crosstalk to the other mode increases to −10 dB. Furthermore, the channel crosstalk decreases with an increase in OAM mode spacing.

Detecting moving objects is of great importance for autonomous unmanned vehicle systems, and a challenging task especially in complex dynamic environments. This paper proposes a novel approach for the detection of moving objects and the estimation of their motion states using consecutive stereo image pairs on mobile platforms. First, we use a variant of the semi-global matching algorithm to compute initial disparity maps. Second, assisted by the initial disparities, boundaries in the image segmentation produced by simple linear iterative clustering are classified into coplanar, hinge, and occlusion. Moving points are obtained during ego-motion estimation by a modified random sample consensus) algorithm without resorting to time-consuming dense optical flow. Finally, the moving objects are extracted by merging superpixels according to the boundary types and their movements. The proposed method is accelerated on the GPU at 20 frames per second. The data which we use for testing and benchmarking is released, thus completing similar data sets. It includes 812 image pairs and 924 moving objects with ground truth for better algorithms evaluation. Experimental results demonstrate that the proposed method achieves competitive results in terms of moving-object detection and their motion state estimation in challenging urban scenarios.

Line-of-sight wireless communications can benefit from the simultaneous transmission of multiple independent data streams through the same medium in order to increase system capacity. A common approach is to use conventional spatial multiplexing with spatially separated transmitter/receiver antennae, for which inter-channel crosstalk is reduced by employing multiple-input-multiple-output (MIMO) signal processing at the receivers. Another fairly recent approach to transmitting multiple data streams is to use orbital-angular-momentum (OAM) multiplexing, which employs the orthogonality among OAM beams to minimize inter-channel crosstalk and enable efficient (de)multiplexing. In this paper, we explore the potential of utilizing both of these multiplexing techniques to provide system design flexibility and performance enhancement. We demonstrate a 16 Gbit/s millimeter-wave link using OAM multiplexing combined with conventional spatial multiplexing over a short link distance of 1.8 meters (shorter than Rayleigh distance). Specifically, we implement a spatial multiplexing system with a $2\times 2$ antenna aperture architecture, in which each transmitter aperture contains two multiplexed 4 Gbit/s data-carrying OAM beams. A MIMO-based signal processing is used at the receiver to mitigate channel interference. Our experimental results show performance improvements for all channels after MIMO processing, with bit-error rates of each channel below the forward error correction limit of $3.8\times 10^{-3}$ . We also simulate the capacity for both the $4\times 4$ MIMO system and the $2\times 2$ MIMO with OAM multiplexing. Our work indicates that OAM multiplexing and conventional spatial multiplexing can be simultaneously utilized to provide design flexibility. The combination of these two approaches can potentially enhance system capacity given a fixed aperture area of the transmitter/receiver (when the link distance is within a few Rayleigh distances).

We explore the use of a switchable single-photon detector (SPD) array scheme to reduce the effect of a detector’s deadtime for a multi-bit/photon quantum link. The case of data encoding using M possible orbital-angular-momentum (OAM) states is specifically studied in this paper. Our method uses N SPDs with a controllable M × N optical switch and we use a Monte Carlo-based method to simulate the quantum detection process. The simulation results show that with the use of the switchable SPD array, the detection system can allow a higher incident photon rate than what might otherwise be limited by detectors’ deadtime. For the case of M = 4 , N = 20 , a 50-ns deadtime for the individual SPDs, an average photon number per pulse of 0.1, and under the limit that at most 10 % of the photon-containing pulses are missed, the switchable SPD array will allow an incident photon rate of 2250 million counts/s (Mcts/s). This is 25 times the 90 Mcts/s incident photon rate that a non-switchable, 4-SPD array will allow. The increase in incident photon rate is more than the 5 times increase, which is the simple increase in the number of SPDs and the number of OAM encoding states (e.g., N ∕ M = 20 ∕ 4 ).

We experimentally investigate the scattering effect on an 80 Gbit/s orbital angular momentum (OAM) multiplexed optical wireless communication link. The power loss, mode purity, cross talk, and bit error rate performance are measured and analyzed for different OAM modes under scattering levels from ballistic to diffusive regions. Results show that (i) power loss is the main impairment in the ballistic scattering, while the mode purities of different OAM modes are not significantly affected; (ii) in the diffusive scattering, however, the performance of an OAM-multiplexed link further suffers from the increased cross talk between the different OAM modes.

Beams carrying orbital-angular-momentum (OAM) have gained much interest due to their unique amplitude and phase structures. In terms of communication systems, each of the multiple independent data-carrying beams can have a different OAM value and be orthogonal to all other beams. This paper will describe the use of multiplexing and the simultaneous transmission of multiple OAM beams for enhancing the capacity of communication systems. We will highlight the key advances and technical challenges in the areas of (a) free-space and fiber communication links, (b) mitigation of modal coupling and channel crosstalk effects, (c) classical and quantum systems, and (d) optical and radio frequency beam multiplexing.

We simulate and experimentally demonstrate the optical single-pixel identification of two-dimensional (2D) objects by analyzing the corresponding complex-valued (i.e, amplitude and phase) Laguerre–Gaussian​ ( LG l , p ) spectra containing both the azimuthal (i.e., l ) and radial (i.e., p ) indices. A sequence of optical beams, each carrying a different superposition of one LG mode and one fundamental Gaussian mode, propagate through the objects. The amplitude and phase contributions of each LG modal component are then obtained by four sequential power measurements using a single-pixel detector. We reconstruct the 2D spatial structures of fan-shaped objects with different orientation angles and an “SC” logo using the measured complex LG spectra that contain 31 different azimuthal and 31 different radial index values. The simulation and experimental results show that (i) the minima positions of the amplitude-only LG sub-spectra (fixed l = 0 , varying p ) are dependent on the object’s spatial information along its radial direction, (ii) the amplitude-only LG spectrum is likely to be insensitive to the object’s orientation angle, and (iii) the slopes of the phase-only LG sub-spectra (fixed p , varying l ) are linearly proportional to the object’s orientation angle.

We demonstrate an optical recirculating delay loop by shifting the spatial mode order of orbital-angular-momentum (OAM) beams in the free-space. The desired delay can be selected at the loop output by exploiting the orthogonality of the OAM modes. When sending a 20-Gbaud quadrature-phase-shift-keyed (QPSK) signal through the delay system, three recirculations are demonstrated, each with an additional delay of 2.2 ns. Around 0.5 and 2 dB system penalties are measured for the second and third recirculations, respectively. We also simulate the performance of our approach under different scenarios.

Gene regulatory mechanisms rely on a complex network of RNA processing factors to prevent untimely gene expression. In fission yeast, the highly conserved ortholog of human ERH, called Erh1, interacts with the YTH family RNA binding protein Mmi1 to form the Erh1-Mmi1 complex (EMC) implicated in gametogenic gene silencing. However, the structural basis of EMC assembly and its functions are poorly understood. Here, we present the co-crystal structure of the EMC that consists of Erh1 homodimers interacting with Mmi1 in a 2:2 stoichiometry via a conserved molecular interface. Structure-guided mutation of the Mmi1Trp112 residue, which is required for Erh1 binding, causes defects in facultative heterochromatin assembly and gene silencing while leaving Mmi1-mediated transcription termination intact. Indeed, EMC targets masked in mmi1∆ due to termination defects are revealed in mmi1W112A. Our study delineates EMC requirements in gene silencing and identifies an ERH interface required for interaction with an RNA binding protein.

We experimentally demonstrate the four-fold multiplexing of Hermite–Gaussian (HGmn) or Laguerre–Gaussian (LGlp) modes to achieve a 400 Gbit/s quadrature-phase-shift-keyed (QPSK) free-space optical communication link. In this experiment, both modal indices for the HG and LG modes are simultaneously utilized to achieve a larger potential orthogonal modal space. Moreover, we also investigate and compare the effects of aperture size, lateral displacement, and rotation on the system. We measure the degree of performance degradation due to the following: (1) a receiver aperture with a limited size causes power loss and crosstalk for both HG and LG modes; (2) a lateral misalignment between the transmitter and receiver which leads to crosstalk for LG modes, but might not affect HG0n or HGm0 modes due to axial symmetry; and (3) a rotational misalignment between the transmitter and receiver which causes crosstalk for the HG modes, but does not tend to affect the LG modes due to azimuthal symmetry.

A single-end adaptive-optics (AO) module is experimentally demonstrated to mitigate the emulated atmospheric turbulence effects in a bi-directional quantum communication link, which employs orbital angular momentum (OAM) for data encoding. A classical Gaussian beam is used as a probe to detect the turbulence-induced wavefront distortion in the forward direction of the link. Based on the detected wavefront distortion, an AO system located on one end of the link is used to simultaneously compensate for the forward and backward channels. Specifically, with emulated turbulence and when the probe is turned on, the mode purity of photons carrying OAM l = 1 is improved by ~ 21 % with AO mitigation. We also measured the performance when encoding data using OAM { l = - 1 , + 2 } and { l = - 2 , + 1 } in the forward and backward channels, respectively, at 10 Mbit/s per channel with one photon per pulse on average. For this case, we found that the AO system could reduce the turbulence effects increased quantum-symbol-error-rate (QSER) by ~ 76 % and ~ 74 %, for both channels in the uni-directional and bi-directional cases, respectively. Similar QSER improvement is observed for the opposite direction channels in the bi-directional case.

In this Letter, we experimentally demonstrate beaconless beam displacement tracking for free-space optical communication link multiplexing multiple orbital angular momentum (OAM) beams, where the data-carrying OAM beams are used for position detection. 400 Gbit/s data transmission is demonstrated under emulated lateral displacement of up to ±10 mm with power penalties of less than 3 dB for all channels. Channel crosstalk is reduced by the beam tracking system to below −18 dB. Moreover, we investigate using a Gaussian beacon for beam displacement tracking, and achieve similar channel crosstalk and power penalties, compared with using the beaconless beam tracking.

We experimentally demonstrate a 400-Gbit/s mode-division-multiplexed free-space-optical communication link using four Laguerre-Gaussian modes or four Hermite-Gaussian modes, achieving a power penalty < 4 dB. The influence of displacement and rotation on system performance is investigated.

We experimentally demonstrate and investigate the effect of limited aperture size on a 200-Gbit/s retro-reflected free-space optical link between a ground station and a UAV up to ∼100-m roundtrip distance by multiplexing 2 OAM beams.

We experimentally demonstrate simultaneous pre-and-post adaptive-optics compensation for an OAM-encoded, bi-directional quantum communication link. The atmospheric turbulence-induced quantum-symbol-error-rates are improved by ∼74.0 % and ∼74.1 % in forward and backward channels using the compensation method.

We experimentally demonstrate a free-space, bi-directional quantum communication link encoded by two OAM states using multi-port mode converters. We achieve a quantum-symbol-error-rate of − 0.058 for each channel at 20 Mbit/s/channel when OAM mode-spacing is 4.

We experimentally investigate the performance of a quantum communication link using Laguerre-Gaussian (LG) modes with different radial indices. Quantum symbol error rate (QSER)

We experimentally investigate the effect of multiple scattering on the performance of an 80-Gbit/s orbital angular momentum (OAM) multiplexed optical wireless link regarding both power loss and channel crosstalk.

We experimentally demonstrate adaptive-optics compensation of emulated atmospheric turbulence for an OAM-based quantum communication link with a classical Gaussian beam used as probe. The turbulence-induced quantum-symbol-error-rate is reduced by « 76 % with the compensation.

Generation and detection of millimeter-wave carrying orbital angular momentum (OAM) have been of growing interest. In this paper, we evaluate patch antenna arrays with different arrangements as OAM generators and receivers by simulation. We compare beam evolution processes and steering performance for circular and ring-antenna-array based OAM links. Mode purity of the generated OAM +1 beam fluctuates between 10% and 99% for ring antenna arrays with 10 cm diameters while it remains >99% for circular antenna arrays. Compared to a ring-antenna-array based link, the circular-antenna- array based link could have an ~10 dB lower power loss at the distance up to 0.5m. We also show that a 5cm diameter circular antenna array could steer an OAM +1 beam up to 80o with a mode purity degradation of

Light beams can be characterized by their complex spatial profiles in both intensity and phase. Analogous to time signals, which can be decomposed into multiple orthogonal frequency functions, a light beam can also be decomposed into a set of spatial modes that are taken from an orthogonal basis. Such decomposition can potentially provide a tool for spatial spectrum analysis, which may enable stable, accurate, and robust extraction of physical object information that may not be readily achievable using traditional approaches. As a proof-of-concept example, we measure an object’s opening angle using orbital-angular-momentum (OAM) -based complex spectrum, achieving a >15 dB signal-to-noise ratio. Moreover, the dip (i.e., notch) positions of the OAM intensity spectrum are dependent on an object’s opening angle but independent of the opening’s angular orientation, whereas the slope of the OAM phase spectrum is dependent on the opening’s orientation but independent of the opening angle.

Analogous to time signals that can be composed of multiple frequency functions, we use uniquely structured orthogonal spatial modes to create different beam shapes. We tailor the spatial structure by judiciously choosing a weighted combination of multiple modal states within an orthogonal orbital angular momentum (OAM) basis set, creating desired beam intensity "shapes." The weights of the OAM beams to be combined forms a Fourier pair with the spatial intensity distribution in the azimuthal direction of the resultant beam. As an example, we simulate and experimentally create various beam shapes by designing the weights of the combined OAM beams. We also find that 6× higher localized power, as compared to traditional beam combining, could be achieved by coherently combining nine orthogonal OAM beams.

There is a continuing growth in the demand for data bandwidth, and the multiplexing of multiple independent data streams has the potential to provide the needed data capacity. One technique uses the spatial domain of an electromagnetic (EM) wave, and space division multiplexing (SDM) has become increasingly important for increased transmission capacity and spectral efficiency of a communication system. A subset of SDM is mode division multiplexing (MDM), in which multiple orthogonal beams each on a different mode can be multiplexed. A potential modal basis set to achieve MDM is to use orbital angular momentum (OAM) of EM waves. In such a system, multiple OAM beams each carrying an independent data stream are multiplexed at the transmitter, propagate through a common medium and are demultiplexed at the receiver. As a result, the total capacity and spectral efficiency of the communication system can be multiplied by a factor equal to the number of transmitted OAM modes. Over the past few years, progress has been made in understanding the advantages and limitations of using multiplexed OAM beams for communication systems. In this review paper, we highlight recent advances in the use of OAM multiplexing for high-capacity free-space optical and millimetre-wave communications. We discuss different technical challenges (e.g. atmospheric turbulence and crosstalk) as well as potential techniques to mitigate such degrading effects. This article is part of the themed issue ‘Optical orbital angular momentum’.

We propose and simulate the use of the unique intensity gradient of beams carrying orbital angular momentum (OAM) for tracking and localization of an object. We design a three-pixel detector structure to efficiently determine the intensity gradient of an OAM beam. The resultant intensity gradient is then used to calculate the offset direction and distance of the target object from the center of the OAM beam. Our simulation results indicate the following: (i) an OAM-based localization system can have a stronger control signal than the one generated from a Gaussian beam; (ii) an OAM+2 beam may generate a ∼5× stronger localization feedback signal but operates over half the target capture area as an OAM+1 beam; and (iii) our scheme will generally have two orders of magnitude lower accuracy but ∼2× larger coverage area as the distance from the beam emitter to the target increases from 200 to 1000 m.

We experimentally demonstrate beam displacement tracking and correction using orbital-angular-momentum (OAM) beams based position detection over a 400-Gbit/s OAM-multiplexed link. Power penalties

We demonstrate the use of orbital angular momentum based spatial spectrum analysis for the estimation of object parameters. The proposed approach is insensitive to object rotation or probing beam diffraction caused by object truncation.

We demonstrate a diffraction insensitive parameter sensing approach by analyzing the measured spatial spectrum of an object truncated light using orbital-angular-momentum basis. Our parameter estimation is nearly independent of the object distance.

We explore using a switchable detector array to reduce the deadtime effect in an OAM-encoded quantum system. For a 4-OAM-state system, the switchable 16-detector array could provide >15X incident photon rate improvement, as compared to a non-switchable 4-detector array.

We experimentally demonstrate an OAM-based quantum communication link populated by a classical channel. OAM enables an up to 100-Mbit/s quantum data rate as well as an additional 18.5-dB separation between the quantum and classical channels.

Structured light refers to the generation and application of custom light fields. As the tools and technology to create and detect structured light have evolved, steadily the applications have begun to emerge. This roadmap touches on the key fields within structured light from the perspective of experts in those areas, providing insight into the current state and the challenges their respective fields face. Collectively the roadmap outlines the venerable nature of structured light research and the exciting prospects for the future that are yet to be realized.

This paper reports an experimental investigation of using orthogonal frequency division multiplexing (OFDM) on orbital-angular momentum (OAM) channels when there is intersymbol interference (ISI) caused by multipath effects. The impulse response measurement indicates that due to the divergence of OAM beams, channels of larger OAM number are more affected by the ISI caused the reflections from surrounding objects. Channel performance of three different OAM numbers l = 0, +1 and +3 are studied. When a single QPSK channel is used, the more channel performance degradation in term of BER and EVM is observed for higher OAM channels. OFDM with 4 sub-carriers is used on the OAM channels to help reduce the ISI and improve the channel performance to some extent.

Electromagnetic waves carrying orbital angular momentum (OAM) have been used for mode division multiplexing in free-space communication systems to increase both the capacity and the spectral efficiency. In the case of conventional wireless communication links using non-OAM beams, multipath effects caused by beam spreading and reflection from the surrounding objects affect the system performance. This paper presents the results of analysis, simulations, and measurements of multipath effects in a millimetre-wave communication link using OAM multiplexing at 28 GHz. Multipath-induced intra- and inter-channel crosstalk, which are caused by specular reflection from a plane parallel to the propagation path, are analysed and measured. Both the simulation and the experimental results show that an OAM channel with a high OAM number ℓ tends to suffer from both strong intra-channel crosstalk and strong inter-channel crosstalk with other OAM channels. Results of the analysis show that this observation can be explained on the basis of both the properties of OAM beam divergence and the filtering effect at the receiver, which is associated with the spiral wavefront of OAM beams.