Search

Laser powder bed fusion (LPBF) includes a few printing techniques widely used, in recent years, concerning the additive manufacturing of Ti6Al4V alloys. These produced parts, typically utilized in sectors such as aerospace and biomedical, are characterized by very high added value. It is therefore fundamental to identify the influence of process parameters typical of LPBF technology on the occurrence of warping leading to process failure. This study deals with the characterization of single-track and “micro-scale” level warping phenomena which may lead to protrusion of material over the powder bed and process failure before normal termination. This phenomenon was investigated as a function of process parameters, referring also to the strength and ductility characteristics of the manufactured samples. With this purpose, several samples were printed using variable process parameters both in terms of line energy density (LED) values and in terms of laser power and speed combinations such as to guarantee constant LED values. For the samples that did not show significant micro-warping phenomena, in addition to the transversal and longitudinal geometric characterization of the single track, tensile tests were performed to determine both the resistance of the material and the ductility characteristics. The single tracks, for given process parameters, were printed on a homogeneous material substrate. For every single track, a microstructural and morphological transverse and longitudinal characterization has been carried out and the measured geometrical features were correlated to the process parameters. The obtained results allowed the identification of a new threshold parameter, indicating the limit operating conditions beyond which significant warping phenomena and process failure occur.

Titanium alloy Ti6Al4V is one of the most utilized alloys in the field of additive manufacturing due to the excellent combination of mechanical properties, density and good corrosion behavior. These characteristics make the use of this material particularly attractive for additively manufacturing components with complex geometry in sectors such as aeronautics and biomedical. Selective Laser Melting (SLM), by which a component is fabricated by selectively melting of stacked layers of powder using a laser beam, is the one of most promising additive manufacturing technologies for Ti6Al4V alloy. Although this technique offers numerous advantages, it has some critical issues related to the high thermal gradients, associated with the process, promoting the formation of a metastable martensitic microstructure resulting in high tensile strength but poor ductility of the produced parts. The formation of microstructural defects such as balling and porosity can occur together with the presence of residual stresses that may significantly affect the mechanical characteristics of the component. Specific process parameters and geometries can determine heat accumulation phenomena that result in a progressive decrease in thermal gradients between layers. These heat accumulation phenomena are influenced by the number of layers deposited, but also by the building orientation that, for a given geometry, determines a variation of the deposited surface for each layer.

Although in recent times the use of solid-state welding processes as friction stir welding (FSW) has become increasingly widespread, for some joint morphologies, as lap joints, there are still signifcantly less data available on both process parameters optimization and energy consumption. In the present paper, the authors investigated the possibility of enhancing the joint quality in two diferent confgurations, i.e. lap and butt joints, taking into account specifc thermal contribution (STC) conferred to the weld. Strength, micro-hardness and microstructure were evaluated on the produced AA2024 aluminum alloys butt and lap joints. The surface response method (RSM) was used to investigate the efects of the main process parameters and to identify optimal technological parameters in terms of joint resistance, while the specifc energy consumption (SEC) of the entire process was acquired with the aim to provide design guidelines taking into account, at the same time, mechanical performance and environmental impact. It was found that the same optimal range of revolutionary pitch can be identifed for both the confgurations. Additionally, maximizing welding speed, for a given revolutionary pitch, contributes to signifcantly reduce the environmental impact of the process with no detrimental effect on the joint performance.

Laser powder bed fusion is one of the additive manufacturing technologies which has developed more rapidly in recent years as it enables the production of very complex geometries. Titanium alloys are among the most popular materials in the aerospace industry thanks to excellent mechanical and corrosion resistance. The corrosion behavior and mechanical properties of samples made of Ti6Al4V and characterized by the geometrical features typical of brackets were investigated taking into account the effects of process parameters on porosity and microstructure. A comparison between the corrosion resistance of samples with complex geometry (3D) and specimens characterized by simple geometry (FLAT) was carried out to understand the role of the part geometry in the passive film formation mechanism, also highlighting the effect of the lack of passivation film formed naturally by exposure to air. Finally, the samples with complex geometry were anodized in a fluoride-free aqueous solution and the corrosion resistance was evaluated.

Magnesium alloys, because of their good specific material strength, can be considered attractive by different industry fields, as the aerospace and the automotive one. However, their use is limited by the poor formability at room temperature. In this research, a numerical approach is proposed in order to determine an analytical expression of material formability in hot incremental forming processes. The numerical model was developed using the commercial software ABAQUS/Explicit. The Johnson-Cook material model was used, and the model was validated through experimental measurements carried out using the ARAMIS system. Different geometries were considered with temperature varying in a range of 25–400 °C and wall angle in a range of 35–60°. An analytical expression of the fracture forming limit, as a function of temperature, was established and finally tested with a different geometry in order to assess the validity.

Single Point Incremental Forming (SPIF) has recently introduced the concept of material formability enhancement through localized deformation. Since material is processed by means of a pin tool attached to spindle, physical interference (especially in vertical direction) limits attainable shapes with the conventional process. The aim of the following work is to increase the variety of achievable geometries with SPIF through in-process magnetic field assistance. An innovative configuration managing SPIF tool movement using magnetic force is proposed. With this in mind, a magnet configuration was designed to generate a vertical load able to plastically deform a 0.5 mm thick AA1100 aluminum sheet. Experiments were carried out to prove the concept by manufacturing a truncated cone; the results demonstrated the feasibility of Magnetic Field-Assisted SPIF.

THALASSA is a large research project, developed in the field of the naval structures. It aimed at studying innovative solutions of significant impact in increasing environmental sustainability through a weight reduction, a careful production planning and a circular approach to the entire life cycle of the parts, from design to the disposal/recycle/reuse. The project is led by NAVTEC Technological District and it is composed of a large team counting more than 300 researchers of several centres among which the CNR institutes, the Universities of Messina, Palermo, Catania, Roma “La Sapienza”, and Udine. Innovative solutions for industrial processes of greatest interest for some major national shipbuilding operators such as Azimut Benetti and Fincantieri or for shipowner such as Caronte&Tourits have been investigated, and players such as ATRIA have been assisted in the formulation of innovative coatings. The presence of NAVTEC District has allowed to concentrate the field of action on themes of strong industrial interest and at the same time to widen the research action on a number of different topics with a view on the entire product life cycle. The district allowed to network skills, laboratories and resources that individually would not have led to carry out activities on such a high number of variables, in terms of materials and joint types. Several issues have been addressed, by identifying solutions thanks to skills of the industrial players, such as: joining technologies (i.e. etching / texturing laser, clinching, self piercing riveting, co-curing, bonding, friction stir welding); eco and bio-sustainable composite reinforced by natural (i.e. vegetable or mineral) and hybrid fibres; degree of recoverability of traditional or bio-resins; corrosion of conventional metal structures and processes for increasing the useful life; and innovative coatings that are combined with the functional protection needs of the structures.

Ultrafine grained (UFG) materials are of great potential in industry due to their enhanced mechanical strength and other promising features, such as ability to superplastic deformation or excellent corrosion resistance. Nevertheless, one of the main limitations lies in their low thermal stability, which leads to excessive grain growth at elevated temperature. It influences mainly further processes performed at high temperature, such as joining. It causes detrimental problems during conventional fusion welding, as significant grain growth is observed and therefore the advantages as a result of small average grain size disappear. Therefore, the idea of applying solid state joining process seems to be suitable for UFG materials. Among the group of solid state welding processes there are methods based on friction. One of these methods, which is suitable for samples in the form of rectangular bars, is linear friction welding (LFW). Present study is the first comprehensive work describing the results of UFG aluminium welded using LFW method with additional emphasis put on a position of shear planes of welded samples. The results have shown, that UFG regime has not been preserved in a weld zone. Welding of UFG sample with an average grain size of 1 μm resulted in a grain growth in weld zone to 1.6−2 μm. Chosen parameters allowed to weld samples only locally, nevertheless, results from tensile tests performed on mini samples showed a great potential of the LFW method for joining UFG samples. The tensile strength of welds was in the range of 83–90 % of initial material.

Multi Stage approach is used in Single Point Incremental Forming (SPIF) to overcome one of the main forming limitations, namely the maximum wall angle, characterizing the single stage process. In this paper, different multi-path strategies for the production of parts with flat edges are considered in order to evaluate the best solution in terms of feasibility and geometrical accuracy of the final part: A) mono-directional incremental draw angle; B) mono-directional incremental draw angle with increasing part side; C) Multi-directional approach with non-horizontal path planes. Strain evaluation by means of CGA (Circular Grid Analysis) and defect analysis have been carried out in order to identify the main limitations of each approach. A defect-free part has been obtained with Strategy C. The developed numerical analysis, showing good agreement with experimental thickness distribution, highlighted the peculiar material redistribution from the thicker zones to the thinner ones occurring using Strategy C.

5xxx (Al-Mg) and 6xxx (Al-Mg-Si) series alloys are most commonly used in the marine sector as they can guarantee both a good mechanical behaviour and good resistance to corrosion in the marine constructions. In fact, sea water contains high amounts of chlorides that can cause, after short exposure times, the failure of entire metal structures. Since in a boat there is the coexistence of different materials, it is inevitable that some of them must be welded together. Welds between dissimilar materials often require the use of non-traditional techniques, such as the process of Friction Stir Welding (FSW) and explosion welding. In this work, the resistance to corrosion of FSW joints (AA5083/AA6082) and trimetallic explosion welded joints (AA5083/AA1050/structural steel) combining galvanic coupling and immersion tests with microstructural characterization of corroded regions. In particular the focus of the work is on the corrosion behaviour of thermo-mechanically and nugget zones in FSW joints and on the AA1050/steel interface in the trimetallic joints obtained by explosion welding.

In recent years, the aircraft industry has shifted its preference for metal parts to titanium and its alloys, such as the high-strength Titanium Grade5 alloy. Because of Titanium Grade 5 limited formability at ambient temperature, forming operations on this material require high temperatures. In these conditions, a peculiar microstructure evolves as a result of the heating and deformation cycles, which has a significant impact on formability and product quality. On the other hand, additive manufacturing technologies, as selective laser melting and electron beam melting, are increasingly being used and are replacing more traditional approaches such as machining and forging. Fundamental parts characteristics as mechanical and microstructural properties, geometric accuracy and surface quality strongly depend on the selection of the manufacturing method. The authors of this paper seek to identify the strengths and limitations imposed by the intrinsic characteristics of different manufacturing alternatives for the production of parts of aeronautical significance, providing guidelines for the choice of the most appropriate manufacturing route for given application and part design.

Ever since its inception, friction stir welding (FSW) is being validated by scientific investigations as an effective substitution for fusion-based conventional joining technologies. One of the main strengths of FSW is the possibility to produce dissimilar joints, even using materials extremely different in terms of thermal and mechanical properties. The goal of the present research is to investigate the feasibility of both Al-Ti skin-stringer and reversed Ti-Al skin-stringer joints, highlighting the effect of joint configuration and main process parameters on material flow and joint mechanical properties. During the investigation, the essentiality of the proper heat input through balancing

This paper describes the forming characteristics and mechanics of magnetic field–assisted single point incremental forming (M-SPIF) in which an Nd-Fe-B magnet ball tool is placed on top of a piece of sheet metal and is driven by an Nd-Fe-B magnet placed below the workpiece. To gain an understanding of the force mechanics that power M-SPIF, the tool motion and forming force were experimentally analyzed. In M-SPIF, the forming force is applied multi-directionally, and the resultant force direction is nearly colinear with the polarity of the permanent magnet ball tool. This suggests that the forming characteristics in M-SPIF may be controllable by controlling the magnetic polarity of the tool.

Friction Stir Welding is nowadays an established technique successfully used by many industries. However, most of the research and, consequently, most of the applications regard aluminum alloys and butt joints. T-joints are of high interest for different industrial sectors as aeronautical, aerospace, naval and ground transportation, for which joint integrity and low residual stress are extremely important. In this study, an experimental and numerical approach is proposed with the aim to study the peculiarities of the residual stress distribution and material flow occurring in FSW of CP-Ti T-joints. Experiments were carried out to assess the feasibility of the process and to acquire the temperature data needed for the validation of a specifically set-up numerical model. Peculiar numerical strategies have been defined in order to calculate the residual stress with affordable CPU time and to highlight the bonding surface between the skin and the stringer. Main findings include a longitudinal residual stress profile different from the one usually found for butt joints. The reasons for this behavior were explained through a deep investigation on the temperature distribution in space and evolution in time. Finally, the bonding surface between skin and stringer was highlighted together with the possibility of flow defects in the fillet area.

This work aims at evaluating the mechanical performance of joints in an AA6016 alloy, manufactured by means of two alternative processes: friction stir welding and adhesive bonding. Given its wide use in industrial fields such as automotive and aeronautics, an overlap configuration of joints was selected for the study, and a specific method based on the overlap length evaluation has been developed to allow comparisons among the cases. Two substrate thicknesses are considered in order to vary the overall joint stiffness, and the effect of such geometrical parameter on the mechanical behavior of the joined system is experimentally investigated. The experimental findings highlight that the stiffness of the joint may emphasize the effect of inherent defects due to process, severely affecting the mechanical and failure behavior of overlap-configured joints under static- or cyclic-load conditions.

Explosion welding (EXW) is a solid-state joining process used to produce lap joints out of metal plates of dissimilar materials. During the process, a controlled explosive detonation results in a pressure wave pushing one of the plates to be welded, called flyer, against the other with high velocity. The high pressure and temperature generated, because of the impact energy decaying into heat, create the conditions for solid bonding phenomenon to take place. Due to the complexity of experimental tests, numerical simulation is considered a fundamental design tool for the process. Different approaches are found in literature to simulate the process. In this paper, a dual step Lagrangian–Eulerian approach is proposed to evaluate the effect of different explosives on the final quality of the weld. The numerical model was developed using the commercial software ABAQUS. A three dissimilar materials joint is considered, made of two outer plates of AA5083 aluminum alloy and A516 steel, respectively, and an intermediate layer made of AA1050 aluminum alloy. The model was first validated by comparing the wavy profile of the intermediate layer after the weld, and then used to evaluate the effect of different explosive by analyzing the distribution of the main process parameters as well as the presence of voids.

In the last decades, new flexible manufacturing processes have been developed to face the demands, by many industrial fields, for highly customized complex functional parts. The peculiar design of these components often overcomes conventional sheet metal and bulk metal forming processes capabilities. In order to face this issue, new hybrid techniques, capable of exploit key advantages of different processes, have to be developed. In this study, a method to obtain sheet-bulk joints, based on the Linear Friction Welding process, is proposed. The feasibility of the technique was investigated through an experimental campaign carried out with varying pressure and oscillation frequency using AA6082-T6 aluminum alloy. The main mechanical and metallurgical properties of the produced joints, including typical material flow defects, were highlighted. It was found that sound hybrid sheet-bulk joints can be produced by the proposed approach. Finally, it was highlighted how the height of the weld center zone plays a key role on the mechanical properties of the produced joints.

The growing demand for more environmentally friendly vehicles has led to an increased use of light materials in the transportation industry with the aim to reduce structural weight, fuel consumption, and gas emissions, thereby boosting cost-effectiveness and recyclable properties. Complex multi-material steel-based components would allow to improve mechanical properties and minimize weight even further. In particular, new sandwich materials made by steel outer skins and a polymeric internal layer seems very promising for obtaining mechanical performance and lightness at the same time. Unfortunately, traditional welding techniques, like arc welding, laser welding, and resistance spot welding, usually used to join steels and aluminum alloys, cannot be applied for these materials due to their peculiar nature. In this paper, the feasibility of Friction Stir Welding to join thin sandwich components made of two steel outer layers and an internal polymeric layer was assessed. Both a pin and a pinless tool were used to weld the upper and the lower surface of the joint in order to obtain solid state bonding of the metal and fusion welding of the polymer at the same time.

In recent years, the development of innovative joining methods has increased significantly due to the demands of several industries, such as the naval one, for lightweight structures. In fact, the safeguarding of the sea takes place through the reduction of climate-altering gas emissions, which is induced by energy savings. The latter can be achieved by the adoption of innovative technological solutions inherent to both the manufacturing processes and the increase in the use of light alloys. These solutions can reduce the environmental impact of vessels both in refitting operations and in new buildings. Although its potential in producing effective joints of different materials, the Friction Stir Welding process is still poorly used in the naval field due to difficulties in welding dissimilar joints of thick plates. In this paper, Friction Stir Welding was used to produce joints, in lap configuration, out of two very different, yet widely used in the naval sector, materials. This research work focuses on the engineering of the process, in terms of identification of welding parameters aimed at welding AA5083 H321 aluminum alloy and naval steel grade DH 36 plates with a thickness of 6mm. The results obtained indicate that sound joints can be obtained with a reasonably wide process parameters window when the aluminum plate is placed on top of the steel one.

During the last few years, additive manufacturing has been more and more extensively used in several industries, especially in the aerospace and medical device fields, to produce Ti6Al4V titanium alloy parts. During the Selective Laser Melting (SLM) process, the heterogeneity of finished product is strictly connected to the scan strategies and the building direction. An optimal managing of the latter parameters allows to better control and defines the final mechanical and metallurgical properties of parts. Acting on the building direction it is also possible to optimize the critical support structure. In particular, more support structures are needed for the sample at 0°, while very low support are required for the sample at 90°. To study the effects of build direction on microstructure heterogeneity evolution and mechanical performances of selective laser melted Ti6Al4V parts, two build direction samples (0°, 90°) were manufactured and analyzed using optical metallographic microscope (OM) and scanning electron microscopy (SEM). Isometric microstructure reconstruction and microhardness tests were carried out in order to analyze the specimens. The obtained results indicate that the build direction has to be considered a key geometrical parameter affecting the overall quality of the obtained products.

This paper describes magnetic field-assisted single-point incremental forming (M-SPIF) with a Nd-Fe-B magnet ball tool. In M-SPIF, the tool driven by magnetic force plastically deforms a sheet. The polarity of the magnet tool helps to make the magnetic force (i.e., forming force) more controllable. In creating a truncated cone, the direction of the magnetic force gradually points more outward as the process progresses, and material is forced outwards from the cone center, increasing thinning in M-SPIF, while the cone center remains undeformed in traditional SPIF. Moreover, M-SPIF creates less localized plastic strain than traditional SPIF while forming the desired geometry.

In the last decades, different techniques were proposed to join aluminum sheets with composites materials. Each of them has advantages and weak points over the others and new techniques and patents are continuously developed to overcome these difficulties. In this paper an experimental and numerical investigation on a new Friction Stir Welding based approach to mechanically join AA6082-T6 to self-reinforced polypropylene is presented. The aluminum sheet is pre-holed along both the sides of the weld line and a pinless tool generates the heat and pressure needed to prompt back-extrusion of the composite. New experimental fixtures and hole designs were investigated in order to enhance the mechanical resistance of the joints and a numerical model was set up to study the process mechanics.

In recent decades, the focus of research has shifted towards new production technologies with the aim of optimizing production and reducing costs. These innovative technologies include additive manufacturing processes as Selective Laser Melting (SLM). The analysis of the literature on the identification of optimal building orientation to maximize the mechanical properties and minimize porosity of the final products highlights contrasting results, denoting that the thermomechanical complexity of the process, as associated with the variation of the building orientation, has not been fully clarified. A study in which the building orientation effect was evaluated together with the geometry of the sample and characterized as a function of the preferentially active heat exchange phenomena was carried out with the aim to provide guidelines for the choice of the orientation angle. Heat accumulation phenomena observed in SLM were taken into account to define three geometrical parameters able to identify the causes of the decrease of mechanical properties due to incorrect choice of the orientation angle.

Friction Stir Extrusion is an innovative direct-recycling technology developed for metal machining chips. During the process, a rotating die is plunged into a cylindrical chamber containing the material to be recycled. The stirring action of the die prompts solid bonding phenomena allowing the back extrusion of a full dense rod. One of the main weakness of this technology is the discontinuity of the process itself that limits the extrudates volume to the capacity of the chamber. In order to overcome that limitation, a dedicated extrusion fixture has to be developed, keeping into account the concurrent needs of a continuous machine. The geometry of the die has to ensure proper pressure in the extrusion channel to prompt the extrusion while allowing the continuous loading of fresh charge. Furthermore, the chips entering the chamber have to find proper conditions for the solid bonding to happen. In this study, the design challenges of a continuous Friction Stir Extrusion machine are described and analyzed, giving an insight on the possible solutions using both experimental, numerical analysis, and keeping into account the sensor equipment necessary to monitor the process.

Friction Stir Processing (FSP) has been demonstrated feasible to create local Metal Matrix Composites (MMCs) in light alloys matrix. In this research, local MMCs were produced contextually to the weld using Friction Stir Welding (FSW). SiC particles were added to AA7075 lap joints by creating a proper groove on the top surface of the bottom sheet. Different welds were produced with increasing number of tool passes. The effect of the multiple passes was investigated through shear tests, macro and micro observations, average grain size and microhardness measurements. The welded joints were compared to a reference weld produced with no reinforcements. It was found that poor mixing between matrix and reinforcement phase is obtained with one tool pass. On the contrary, proper mixing is obtained with three tool passes, resulting in an increase in the maximum load in shear tests of 50% with respect to the reference conditions.

Linear friction welding (LFW) is a solid-state joining process used to weld non-axisymmetric components. Material joining is obtained through the reciprocating motion of two specimens undergoing an axial force. During this process, the heat source is determined by the frictional work transformed into heat. This results in a local softening of the material and plays a key role in the onset of the bonding conditions. In this paper, a critical analysis of the different approaches used to simulate the LFW processes is provided. The focus of the paper is the comparison of different modeling strategies and the most relevant outputs available, i.e. temperature, strain and stress distribution, material flow, axial shortening and residual stress. Major issues arising due to the complexity of the process are discussed, highlighting strengths and weaknesses of each approach.

Friction Stir Welding (FSW) is one of the most used solid-state welding processes in the aeronautical, aerospace, ground transportation and naval fields. Stationary Shoulder Friction Stir Welding (SSFSW) is a recently introduced variant of the process allowing lower heat input into the joints, with beneficial effects in terms of joint mechanical properties, microstructure and top surface finish. In the paper, lap joints produced by SSFSW and made out of AA6082-T6 aluminum alloy sheets have been analyzed with the aim to investigate the effect of the stationary shoulder on the lap joints surface, metallurgical, and mechanical properties. The lap joints produced by SSFSW have been compared to the ones produced by “conventional” FSW in order to highlight the differences between the two processes. The top surface of the joints obtained with the two processes has been quantitatively evaluated. Finally, a dedicated numerical model has been utilized to highlight the causes of the observed differences through the distributions of the main field variables, namely temperature, strain and strain rate. It was found that SSFSW results in narrower weld nugget and smaller areas involved by micro hardness reduction caused by smaller peak temperature and high temperature zone. Additionally, better surface quality was found for the joint welded by SSFSW with lower heights and flash, allowing to avoid subsequent finishing operations needed for most industrial applications.

Widespread use of aluminum alloys for the fabrication of car body parts is conditional to the use of appropriate welding methods, especially if dissimilar welding must be performed with automotive steel grades. Friction stir welding (FSW) is considered to be a reasonable solution to obtain sound aluminum-steel joints. In this context, this work studies the effects of tool position and force control in dissimilar friction stir welding of AA6061 aluminum alloy on DC05 low carbon steel in lap joint configuration, also assessing proper welding parameter settings. Naked eye and scanning electron microscopy (SEM) have been used to detect macroscopic and microscopic defects in joints, as well as to determine the type of intermixture between aluminum and steel. The joint strength of sound joints has been assessed by shear tension test. Results point out that tool force control allows for obtaining joints with better quality and strength in a wider range of process parameters. A process window has been determined for tool force conditions to have joints with adequate strength for automotive purposes.

Conventional metal chips recycling processes are energy-intensive with low efficiency and permanent material losses during re-melting. Solid state recycling allows direct recycling of metal scraps into semi-finished products. It is expected that this process category would lower the environmental performance of metals recycling. Friction Stir Consolidation is a new solid-state technique taking advantage of friction heat generation and severe plastic deformation to consolidate chips into billets. In this research, the feasibility of Friction Stir Consolidation as aluminum chips recycling process is analyzed. Specifically, an experimental campaign has been carried out with varying main process parameters. Three main aspects have been evaluated in order to highlight products quality and environmental impact of the process: (i) metallurgical and mechanical properties of the consolidated products; (ii) primary energy demand, as compared to conventional processes; (iii) forgeability of the consolidated products, as compared to parent material. Results revealed that a proper process parameters selection results in fully consolidated aluminum disk with satisfactory mechanical properties. Also, the new recycling strategy allows substantial energy savings with respect the conventional (remelting based) route.

Tailored blanks characterized by variable thickness were friction stir welded (FSWed) with the aim to obtain constant joint properties along the weld seam, regardless of the thickness change. To pursue this goal, the heat input was kept constant by in-process control of tool rotation. A dedicated numerical model of the process was used to determine the tool rotation values as a function of the sheet thickness. The mechanical properties and the microstructure of the FSWed joints, produced with varying process parameters, were studied. It was found that the proposed approach can produce joints with uniform properties along the weld line in terms of stress–strain curve shape, joint strength, elongation at failure, and microstructure.

A numerical approach to model the selective laser sintering (SLS) of polypropylene is proposed. A 3D thermal model was developed and thus enables the prediction of the temperature fields and the extension of the sintered area in the powder bed taking into account the phase change during multiple laser passes. Powder–liquid, liquid–solid and solid–liquid phase changes were modelled during the SLS and the subsequent cooling processes. Then, a 3D thermomechanically coupled model was set up based on the temperature results of the thermal model in order to predict the distortion of the produced parts after cooling down. Different pre-heating temperatures were considered, highlighting their influence on the final part properties.

Manufacturing processes, as used for discrete part manufacturing, are responsible for a substantial part of the environmental impact of products. Despite that, most of metalworking processes are still poorly documented in terms of environmental footprint. To be more specific, the scientific research has well covered conventional machining processes, concerning the other processes there is a lack of knowledge in terms of environmental load characterization instead. The present paper aims to contribute to fill this knowledge gap and an energetic analysis of Friction Stir welding (FSW) is presented. Following the CO2PE! methodological approach, power studies and a preliminary time study have been performed in order to comply with the In-Depth approach. The influence of the most relevant process parameters is analyzed regarding the required FSW energy. Finally, a few potential improvement strategies to reduce FSW energy consumption are reported.

A three-degree-of-freedom mathematical vibration model of a high-speed punching press was developed in order to explore the vibration modes of the punching press. A multidomain model of the punching press was established to predict the kinematic state during different conditions, as well as the effects of load fluctuation on the motor speed. Experimental measurements of the acceleration of the punching press were carried out. The results comparison reveals that the multidomain model is consistent with the vibration model and the experimental measurements. Modal analysis and structure modification of the punching press were conducted. The foundation at the base of the punching press was improved against excess of vibration. The effects of the dimensions of the foundation on the vibration were discussed with the aid of the multidomain model. Finally, proper foundation design, able to reduce the vibration, was obtained.

Friction Stir Extrusion is an innovative direct-recycling technology for metal machining chips. During the process a specifically designed rotating tool is plunged into a cylindrical matrix containing the scraps to be recycled. The stirring action of the tool prompts solid bonding related phenomena allowing the back extrusion of a full dense rod. This process results to be particularly relevant because allows the reuse of the scrap without any previous treatment. Experiments have been carried out in order to investigate the influence of the process parameters on the extrudes quality and a numerical model has been developed in order to simulate the evolution of the material flow.

The manufacturing sector accounts for a high share of global electrical energy consumption and CO 2 emissions, and therefore, the environmental impact of production processes is being more and more investigated. An analysis of power and energy consumption in friction stir welding processes can contribute to the characterization of the process from a new point of view and also provide useful information about the environmental impact of the process. An in-depth analysis of electrical energy demand of friction stir welding is here proposed. Different machine tool architectures, including an industrial dedicated machine, have been used to weld aluminum and steel sheets under different process conditions. The influence of tool rotation and feed rate was investigated. A power study, with breakdown analysis, was carried out to identify the contribution of the main sub-units and to determine the total demand. Different setups have been analyzed in order to identify the conditions resulting in the highest energy and mechanical efficiency. Potential control strategies for energy consumption reduction of FSW process are proposed.

A two-stage approach for the simulation of Linear Friction Welding is presented. The proposed model, developed using the commercial simulation package DEFORM, is 3D Lagrangian, thermo-mechanically coupled. The first phase of the process was modelled with two distinct workpieces, while the remaining phases were simulated using a single-block model. The Piwnik–Plata criterion was set up and used to determine the shifting from the dual object to the single-block model. The model, validated against experimental temperature measurements, is able to predict the main field variables distributions with varying process parameters. Titanium alpha and beta phases evolution during the whole process has been predicted and the obtained results have been correlated to the experimentally measured micro-mechanical properties of the joints.

In the last decades, several direct-recycling techniques have been developed and investigated in order to avoid material remelting, typical of the conventional aluminum alloys recycling processes. Moreover, the remelting step for aluminum recycling is affected by permanent material losses. Solid-state recycling processes have proven to be a suitable strategy to face such issues. Friction Consolidation is an innovative solid state-recycling technology developed for metal chips. During the process, a rotating die is plunged into a hollow chamber containing the material to be processed. The work of friction forces decaying into heat soften the material and, together with the stirring action of the die, enable solid bonding phenomena producing a consolidated metal disc. This technology has been successively applied to metal chips; in this paper, the feasibility of the process to recycle sheet metal scrap is investigated. The quality of the obtained billets is evaluated through morphological observation and hardness measurements.

This paper presents the results of an experimental and numerical campaign on Linear Friction Welding of dissimilar AA2011-T8 and AA6082-T6 aluminum alloys. Experimental tests were carried out with constant oscillation amplitude and process time. Varying oscillation frequency, interface pressure, specimen geometry and mutual position were used. Grain size measurements, HV tests and EDX analysis were considered to characterize the microstructure of the joints as a function of the input process parameters. A thermal numerical model was utilized to predict the temperature profiles in the joints during the process. The obtained results allowed the identification of four weld categories: sound joints, “bonding limit” condition and two different unwelded joints. The investigation of the causes of the different joint behavior permitted to obtain a few design guidelines on the LFW of dissimilar alloys with different geometry.

In the present study, a combined experimental and numerical investigation on Linear Friction Welding (LFW) of AA2011-T3 aluminum alloy was carried out in order to find the temperature dependent shear coefficient to be used in a 3D numerical model of the process. Torque, oscillation frequency and pressure were acquired in order to calculate the shear stress at the interface. A numerical thermal model was used to calculate the temperature at the interface between the specimens starting from experimental temperatures acquired through a thermocouple embedded in the LFW specimens. Finally, the calculated shear coefficient was used to model the contact between the two specimens in a dedicated 3D, Lagrangian, thermo-mechanically coupled rigid-viscoplastic numerical model of the LFW process. A narrow range of variation of the shear factor vs temperature curve was found with varying LFW process parameters and good agreement was obtained for the temperature prediction of the 3D model of the process. Keywords: Linear friction welding, Shear coefficient, FEM model, Aluminum alloys

Friction Stir Extrusion is a novel technique for direct recycling of metal scrap. In the process, a dedicated tool produces both the heat and the pressure to compact and extrude the original raw material, i.e., machining chip, as a consolidated component. A proper fixture was used to carry out an experimental campaign on Friction Stir Extrusion of AZ31 magnesium alloy. Variable tool rotation and extrusion ratio were considered. Appearance of defects and fractures was related to either too high or too low power input. The extruded rods were investigated both from the metallurgical and mechanical points of view. Tensile strength up to 80 % of the parent material was found for the best combination of process parameters. A peculiar 3D helical material flow was highlighted through metallurgical observation of the specimens.

Titanium forging has been encountering a growing interest in the scientific and industrial communities because of the distinct advantages it provides with respect to machining, in terms of both mechanical properties of the product and material waste, thus significantly reducing the Buy to Fly ratio. In the paper, a numerical FE model, based on a tri-coupled approach and able to predict the microstructural evolutions of the workpiece during the process, is developed and set up. Calculated results are compared to experiments for a few industrial case studies. The final phases distribution in the forged parts is experimentally measured and compared to the FE model output finding satisfying overlapping.

Solid Bonding based welding processes allow to obtain defect free joints with low residual stress and low distortion. However, the engineering and optimization of solid bonding processes is difficult and requires a large number of time and cost consuming test trials. In this way, proper numerical models are essential tools permitting effective process design. The aim of this research was the comparison of the material process conditions during two different manufacturing processes taking advantage of the same metallurgical phenomenon, namely solid bonding. Linear Friction Welding, used to weld non-axisymmetric components and Accumulative Roll Bonding, used to increase the mechanical properties of sheet metals, were considered. Numerical models were set up, validated and used to design the process by studying the complex material behavior during the solid bonding of different aluminum alloys. An implicit approach was used for the Linear Friction Welding and Accumulative Roll Bonding processes, leading to the understanding of the main process variables influence on the field variables distribution and the occurrence of actual bonding.

In this paper, a critical analysis of the technical difficulties and numerical issues in running simulations of linear friction welding processes is carried out. The focus of the paper is the comparison of different modeling strategies of a numerical analysis for the LFW process of Ti-6Al-4V titanium alloy, for which the thermal aspect strongly influences the mechanical behavior due to the phase transformation, taking place over a definite range of temperature. A 3D simulation campaign, conducted using the FEA code DEFORMTM, was considered in order to show advantages and disadvantages of each approach, including the most critic limitations and complexity in a correct simulation design using two deformable objects.

Two different in-process control strategies were developed and compared with the aim to produce AZ31 magnesium alloy joints by friction stir welding on sheet blanks with a non-uniform thickness. To this purpose, sheets with dip or hump zones were welded by either changing the rotational speed or the tool plunging in order to keep constant the value of the vertical force occurring during the welding stage of the process. The influence of the main process parameters on the tool force, the micro- and macromechanical properties, and the joints microstructures in the dip and hump zones were analyzed. The results showed that using the rotational speed change-based approach, the hump zones are subjected to increased heat input with consequent increase of the heat-affected zone extension and average grain size (up to 11 μm). On the contrary, using the tool plunge change-based approach, the weld seam thickness in the dip zones is reduced, resulting in a decreased joint strength, with respect to tool rotation approach, equal to about 18%.

Ultrafine Grained (UFG) metals are characterized by an average grain size of

Linear Friction Welding (LFW) is a solid state welding process used to joint bulk components. In the paper, an experimental and numerical study on LFW of Ti6Al4V titanium alloy is presented. A laboratory designed LFW machine has been used to weld the specimens with different contact pressure and oscillation frequency. The joint microstructure has been experimentally observed with SEM and EDS. A dedicated numerical model, able to predict temperature, strain and strain rate distribution as well as the phase volume fraction evolution, has been utilized to predict the final microstructure in the welded parts. It was found that complete transformation of the alpha phase into beta phase occurs during the process. After cool down, martensitic structure is obtained at the core of the weld due to high temperatures reached during the process and high cooling rates occurring at the end of the reciprocating motion. Microhardness measurements confirmed increased hardness in the Weld Zone with respect to the parent material

In this study, two bonding criteria, previously used for porthole die extrusion, are applied to FSW starting from the local value of the main field variables calculated through a specifically developed 3D numerical model of the process. Their applicability and effectiveness have been assessed through an experimental and numerical campaign carried out with the main process parameters varying in a wide range. The pressure–time–flow criterion was demonstrated to be better suited for FSW processes when large welding speed is used.

Friction Stir Welding (FSW) is a solid-state welding process used to weld difficult to be welded or unweldable materials as aluminum alloys. In the last years other materials have been successfully tested as magnesium, titanium and nickel based alloys. Mixed joints can be obtained by FSW but issues arise in the correct choice of the process parameters. In the paper a numerical model is presented for the prediction of the main field variables distribution and the occurring material flow in FSW of dissimilar AA6061 and AZ31 butt joints. Important insights are obtained on the effect of the mutual position of the two materials with respect to the advancing and retreating side of the joint has been highlighted.