Search

Herein, this study reports scalable and selective n-type conversion (N/C) approach for single walled carbon nanotube (SWNT) transistors with high reproducibility by using novel control of hydroxyl groups through condensation on the surface of SWNTs, via the patternable cross-linked polyvinyl alcohol (C-PVA), followed by encapsulation of photo-definable hydrophobic polymer (~SU8). Moreover, N/C process capability is statistically evaluated in terms of selective doping, process yield, and statistical variation in electrical parameters, and as practical validation, complementary inverters, NOR and NAND logic gates are fully demonstrated. As one of key findings, it is elucidated that N/C uniformity and its underlying physics, supported by Fourier-transform infrared spectroscopy (FTIR) and Raman analysis, are highly correlated with ambient condition, C-PVA thickness, and encapsulation. More practically, reproducible field effect mobility for n-type (or p-type) SWNT TFTs after (or before) N/C are achieved at ~ 3.65 ± 1.30 (or 8.76 ± 2.16) cm2 V−1 s−1, with magnificent process yield (~100%) and reasonable mobility reduction, which is on par with the previous report. Hence, all demonstration and their analyses suggest that this scalable N/C scheme for SWNT TFTs can be one of core technologies for the next generation semiconductor-based devices and their envisioned application.

This paper aims to discuss the key accomplishments and further prospects of active-matrix (AM) quantum-dot (QD) light-emitting diodes (QLEDs) display. We present an overview and state-of-the-art of QLEDs as a frontplane and non-Si-based thin-film transistors (TFTs) as a backplane to meet the requirements for the next-generation displays, such as flexibility, transparency, low power consumption, fast response, high efficiency, and operational reliability. After a brief introduction, we first review the research on non-Si-based TFTs using metal oxides, transition metal dichalcogenides, and semiconducting carbon nanotubes as the driving unit of display devices. Next, QLED technologies are analyzed in terms of the device structure, device engineering, and QD patterning technique to realize high-performance, full-color AM-QLEDs. Lastly, recent research on the monolithic integration of TFT–QLED is examined, which proposes a new perspective on the integrated device. We anticipate that this review will help the readership understand the fundamentals, current state, and issues on TFTs and QLEDs for future AM-QLED displays.

Conventional stretchable electronics entailing the adoption of a wavy design, a neutral mechanical plane, and a conformal contact between abiotic and biotic interfaces have shown diverse skin-interfaced applications. Despite such remarkable progress, there have been challenged to be evolved to intelligent skin prosthetics due to the absence of the monolithic integration of neuromorphic constituents into individual sensing and actuating components. Herein, we demonstrate a golden tortoise beetle-inspired stretchable sensory-neuromorphic system comprising an artificial mechanoreceptor, an artificial synapse, and an epidermal photonic actuator as three biomimetic functionalities that correspond to a stretchable capacitive pressure sensor, a resistive random-access memory, and a quantum dot light-emitting diode, respectively. This system features a rigid-island structure interconnected with a sinter-free printable conductor (stretchability ~ 160%, conductivity ~ 18,550 S/cm), which allows one to improve both areal density and structural reliability while avoiding the thermal degradation of heat-sensitive stretchable electronic components. Moreover, even in the skin deformation range, the system accurately recognizes various patterned stimuli via an artificial neural network with training/inferencing functions. Our new bioinspired system is therefore expected to be an important step toward the implementation of intelligent wearable electronics.

We report the synthesis of carnation flower-like SnS2 (CF-SnS2) via a one-step solvothermal method for potential application as supercapacitor electrodes in energy storage devices. The structural and morphological properties of CF-SnS2 were characterized by X-ray diffraction, Raman analysis, and field-emission scanning and transmission electron microscopies. X-ray photoelectron spectroscopy and scanning tunneling electron microscopy with color mapping verified the distribution of Sn and S, and depicted the successful formation of SnS2. Electrochemical studies were performed to explore the supercapacitive nature of CF-SnS2. Supercapacitors with CF-SnS2 electrodes delivered excellent cyclic voltammetry performances, superior gravimetric specific capacitances, and high power densities. The evaluated specific capacitance and power density reached ∼524.5 F/g and 12.3 W/kg, respectively, at a current density of 0.08 A/g, and ∼215.9 F/g and 61.4 W/kg, respectively, at a current density of 0.38 A/g. These values are at least two times higher than those previously reported. The long-term cyclic stability was also tested to demonstrate the endurance of the CF-SnS2-based supercapacitor, with a 66% rate retention and galvanostatic charge/discharge reversibility. These electrochemical findings indicate that CF-SnS2 is a promising candidate for electrode materials in supercapacitor applications.

Conventional stretchable electronics that adopt a wavy design, a neutral mechanical plane, and conformal contact between abiotic and biotic interfaces have exhibited diverse skin-interfaced applications. Despite such remarkable progress, the evolution of intelligent skin prosthetics is challenged by the absence of the monolithic integration of neuromorphic constituents into individual sensing and actuating components. Herein, a bioinspired stretchable sensory-neuromorphic system, comprising an artificial mechanoreceptor, artificial synapse, and epidermal photonic actuator is demonstrated; these three biomimetic functionalities correspond to a stretchable capacitive pressure sensor, a resistive random-access memory, and a quantum dot light-emitting diode, respectively. This system features a rigid-island structure interconnected with a sinter-free printable conductor, which is optimized by controlling the evaporation rate of solvent (≈160% stretchability and ≈18 550 S cm-1 conductivity). Devised design improves both areal density and structural reliability while avoiding the thermal degradation of heat-sensitive stretchable electronic components. Moreover, even in the skin deformation range, the system accurately recognizes various patterned stimuli via an artificial neural network with training/inferencing functions. Therefore, the new bioinspired system is expected to be an important step toward implementing intelligent wearable electronics.

Cost-effective gas-phase synthesized single walled carbon nanotubes (SWCNTs) were first employed for the surface modification of indium tin oxides (ITO) via electrostatic coating of poly-l-lysine (PLL). Compared with control substrates of bare ITO and SWCNT-PLL-slide glasses, SWCNT-PLL-ITO, with high catalytic properties associated with large surface areas, showed significant improvement of electro catalytic activity toward the oxidation of dopamine (DA) and uric acid (UA). The cyclic voltammetric (CV) peak separation of oxidation for both DA and UA was estimated to be ∼ 0.13 V, which renders them capable of simultaneously detecting DA and UA in a mixed solution. The differential pulse voltammetry (DPV) technique was further performed to obtain a linear detection range of DA from 1.0 μM to 100 μM, and a detection limit of 1.0 μM was confirmed in the mixed solution. Furthermore, the practical analytical ability of the method was finally confirmed by selective detection of both DA and UA in human urine samples without any preliminary treatment, implying the feasibility of applying bio-sensors in a low-cost manner.

Multi-layered MoS2 inverters with light shielding layers were fabricated and demonstrated for application in highly sensitive photodetectors, exploiting the particular advantages of an atomically thin layer and a sizable electrical bandgap. The photoleakage behaviors of the inverters under changing wavelengths of light were experimentally demonstrated to occur in a controlled manner and were analytically validated by load-line analysis. When the inverters were operated with a depletion load in the light of blue light emitting diodes, the low noise margin and transition width were significantly enhanced, by approximately 20% and 220%, respectively, as compared with those of the inverters in the dark.

In recent past, for next-generation device opportunities such as sub-10 nm channel field-effect transistors (FETs), tunneling FETs, and high-end display backplanes, tremendous research on multilayered molybdenum disulfide (MoS

In recent past, for next-generation device opportunities such as sub-10 nm channel field-effect transistors (FETs), tunneling FETs, and high-end display backplanes, tremendous research on multilayered molybdenum disulfide (MoS2 ) among transition metal dichalcogenides has been actively performed. However, nonavailability on a matured threshold voltage control scheme, like a substitutional doping in Si technology, has been plagued for the prosperity of 2D materials in electronics. Herein, an adjustment scheme for threshold voltage of MoS2 FETs by using self-assembled monolayer treatment via octadecyltrichlorosilane is proposed and demonstrated to show MoS2 FETs in an enhancement mode with preservation of electrical parameters such as field-effect mobility, subthreshold swing, and current on-off ratio. Furthermore, the mechanisms for threshold voltage adjustment are systematically studied by using atomic force microscopy, Raman, temperature-dependent electrical characterization, etc. For validation of effects of threshold voltage engineering on MoS2 FETs, full swing inverters, comprising enhancement mode drivers and depletion mode loads are perfectly demonstrated with a maximum gain of 18.2 and a noise margin of ≈45% of 1/2 VDD . More impressively, quantum dot light-emitting diodes, driven by enhancement mode MoS2 FETs, stably demonstrate 120 cd m-2 at the gate-to-source voltage of 5 V, exhibiting promising opportunities for future display application.

We demonstrated highly stable multilayer molybdenum disulfide (MoS2) field-effect transistors (FETs) with negligible hysteresis gap (ΔV(HYS) ∼ 0.15 V) via a multiple annealing scheme, followed by systematic investigation for long-term air stability with time (∼50 days) of MoS2 FETs with (or without) CYTOP encapsulation. The extracted lifetime of the device with CYTOP passivation in air was dramatically improved from 7 to 377 days, and even for the short-term bias stability, the experimental threshold voltage shift, outstandingly well-matched with the stretched exponential function, indicates that the device without passivation has approximately 25% larger the barrier distribution (ΔE(B) = k(B)T(o)) than that of a device with passivation. This work suggests that CYTOP encapsulation can be an efficient method to isolate external gas (O2 and H2O) effects on the electrical performance of FETs, especially with low-dimensional active materials like MoS2.

In this letter, spray-coated single walled carbon nanotubes (SWNTs) as one of alternative electrodes in SnO thin-film transistors are demonstrated for emerging electronic applications. Herein, the device architecture of SnO TFTs with a polymer etch stop layer (SU-8) enables the selective etching of SWNTs in a desired region without the detrimental effects of SnO channel layers. Moreover, SnO TFTs with SWNT electrodes as substitutes successfully demonstrate decent width normalized electrical contact properties (~1.49 kΩ cm), field effect mobility (~0.69 cm2 V−1 s−1), sub-threshold slope (~0.4 V dec−1), and current on–off ratio (I on/I off ~ 3.5 × 103). Systematic temperature dependency measurements elucidate that SnO channel transports with an activation energy within several tens of meV, together with decent contact resistance as compared to that of conventional Ni electrodes.

This paper presents device designs, circuit demonstrations, and dissolution kinetics for amorphous indium–gallium–zinc oxide (a-IGZO) thin film transistors (TFTs) comprised completely of water-soluble materials, including SiNx, SiOx, molybdenum, and poly(vinyl alcohol) (PVA). Collections of these types of physically transient a-IGZO TFTs and 5-stage ring oscillators (ROs), constructed with them, show field effect mobilities (∼10 cm2/Vs), on/off ratios (∼2 × 106), subthreshold slopes (∼220 mV/dec), Ohmic contact properties, and oscillation frequency of 5.67 kHz at supply voltages of 19 V, all comparable to otherwise similar devices constructed in conventional ways with standard, nontransient materials. Studies of dissolution kinetics for a-IGZO films in deionized water, bovine serum, and phosphate buffer saline solution provide data of relevance for the potential use of these materials and this technology in temporary biomedical implants.

We demonstrated highly stable multilayer molybdenum disulfide (MoS2) field-effect transistors (FETs) with negligible hysteresis gap (ΔV(HYS) ∼ 0.15 V) via a multiple annealing scheme, followed by systematic investigation for long-term air stability with time (∼50 days) of MoS2 FETs with (or without) CYTOP encapsulation. The extracted lifetime of the device with CYTOP passivation in air was dramatically improved from 7 to 377 days, and even for the short-term bias stability, the experimental threshold voltage shift, outstandingly well-matched with the stretched exponential function, indicates that the device without passivation has approximately 25% larger the barrier distribution (ΔE(B) = k(B)T(o)) than that of a device with passivation. This work suggests that CYTOP encapsulation can be an efficient method to isolate external gas (O2 and H2O) effects on the electrical performance of FETs, especially with low-dimensional active materials like MoS2.

The authors demonstrate the enhancement mode p-type SnO thin-film transistors (TFTs) using dual gate (DG) structures. The cross-linked polyvinyl alcohol dielectric with a polymethylmethacrylate buffer layer is formed as a top gate (TG) insulator of the DG SnO TFT. The fabricated DG SnO TFT exhibits better electrical performances than the bottom gate (BG) and TG SnO TFTs including higher field-effect mobility and smaller subthreshold slope. In fabricated DG TFTs, the threshold voltage (Vth) of the BG TFT is linearly modulated by the voltage applied to the TG electrode. The BG transfer curve exhibits a depletion mode operation when measured while TG is grounded, but operates in the enhancement mode with a negative Vth (=−0.9 V) when a positive bias of 10 V is applied to the TG electrode. The enhancement mode operation of p-type SnO TFTs can increase the output voltage swing range and decreases the off-stage leakage currents of the complementary logic circuits.

This paper investigates the low-frequency noise properties of multilayer WSe2 field effect transistors (FETs) in subthreshold, linear, and saturation regime. The measured noise power spectral density of drain current (SID) shows that the low-frequency noise in multilayer WSe2 FET fits well to a 1/fγ power law with γ ∼ 1 in the frequency range of 10 Hz–200 Hz. From the dependence of SID on the drain current, carrier mobility fluctuation is considered as a dominant low frequency noise mechanism from all operation regimes in multilayer WSe2 FET. Extracted Hooge's parameter in this study is within the value of 0.12, comparable to those of the transition metal dichalcogenide FETs in recent reports.