Search

Targeting the delivery of anti-cancer drugs to a tumor site is essential for effective treatment and to ensure minimal damage to healthy cells and tissues. In this work, a chitosan-based nanoplatform was constructed for combined photothermal therapy and chemotherapy of breast cancer. The pH-sensitive and biocompatible biopolymer chitosan (CS) was grafted with N-vinylcaprolactam (NVCL) and modified with biotin (Bio), imparting it with temperature sensitive property and also the ability for active targeting. The polymer self-assembled to give nanoparticles (NPs) loaded with indocyanine green (ICG) and doxorubicin (DOX). When the NPs are exposed to near-infrared (NIR) laser irradiation, ICG converts the light to heat, inducing a significant phase transition in the NPs and facilitating the release of the drug cargo. In addition, the solubility of chitosan is increased in the slightly acidic microenvironment of the tumor site, which also promotes drug release. A detailed analysis of the NPs both in vitro and in vivo showed that the carrier system is biocompatible, while the drug-loaded NPs are selectively taken up by cancer cells. Particularly when augmented with NIR irradiation, this leads to potent cell death in vitro and also in an in vivo murine xenograft model of breast cancer.

The removal of Cr

Despite recent advances in the field of mRNA therapy, the lack of safe and efficacious delivery vehicles with pharmaceutically developable properties remains a major limitation. Here, we describe the systematic optimisation of lipid-peptide nanocomplexes for the delivery of mRNA in two murine cancer cell types, B16-F10 melanoma and CT26 colon carcinoma as well as NCI-H358 human lung bronchoalveolar cells. Different combinations of lipids and peptides were screened from an original lipid-peptide nanocomplex formulation for improved luciferase mRNA transfection in vitro by a multi-factorial screening approach. This led to the identification of key structural elements within the nanocomplex associated with substantial improvements in mRNA transfection efficiency included alkyl tail length of the cationic lipid, the fusogenic phospholipid, 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE), and cholesterol. The peptide component (K

Nano-zirconia (ZO) was synthesized using a microwave-assisted one-pot precipitation route. Two biopolymers, chitosan (CTS) and carboxymethyl cellulose were blended with ZO at different w/w ratios. The formulation with 30% w/w chitosan (ZO-CTS) was found to give enhanced uptake of F − and As(V). ZO and the most effective ZO-CTS system were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy. These confirmed the formation of a composite system containing nanoparticles of 50 nm in size, in which ZO was present in the amorphous form. It was observed that the combination of ZO with CTS improved the F − and As(V) adsorption capacity most notably at pH 5.5. Fluoride adsorption by ZO-CTS followed the Freundlich isotherm model, with an adsorption capacity of 120 mg g −1 . Adsorption of As(V) by ZO-CTS could be fitted with both the Langmuir and Freundlich isotherm models and was found to have a capacity of 14.8 mg g −1 . Gravity filtration studies conducted for groundwater levels indicated the effectiveness of ZO-CTS in adsorbing As(V) and F − at a pH of 5.5. The ability of the ZO-CTS in removing Cd(II) and Pb(II) was also investigated, and no such enhancement was observed, and found the neat ZO was the most potent sorbent here.

In this study, gadolinium (Gd) doped MgAl layered double hydroxides (LDHs) were synthesized via a ‘bottom-up’ method and fully characterized by X-ray diffraction, infrared spectroscopy and relaxivity measurements. Two cytotoxic agents were then intercalated via ion-exchange. X-ray diffraction patterns exhibit expanded interlayer spacings as a result of successful drug intercalation. Infrared spectra also showed characteristic peaks of the incorporated methotrexate (MTX) or 5-fluorouracil (5-FU). The LDHs were found to be highly stable under physiological conditions, while in acidic conditions a small proportion of Gd was freed into the immersion medium. Dissolution tests revealed that both 5FU and MTX were rapidly released from the LDH carrier. The longitudinal relaxivity of Gd-LDHs remains largely stable during drug release over 24 h, and was higher in acidic environments. Overall, the drug-loaded Gd-LDH systems prepared in this study could serve as pH-sensitive theranostic platforms for MRI-guided anti-cancer therapy.

Extracellular vesicles (EVs) are routinely released from nearly all cell types as transport vehicles and for cell communication. Crucially, they contain biomolecular content for the identification of health and disease states that can be detected from readily accessible physiological fluids, including urine, plasma, or saliva. Despite their clinical utility within noninvasive diagnostic platforms such as liquid biopsies, the currently available portfolio of analytical approaches are challenged by EV heterogeneity in size and composition, as well as the complexity of native biofluids. Quartz crystal microbalance with dissipation monitoring (QCM-D) has recently emerged as a powerful alternative for the phenotypic detection of EVs, offering multiple modes of analyte discrimination by frequency and dissipation. While providing rich data for sensor development, further progress is required to reduce detection limits and fully exploit the technique’s potential within biosensing. Herein, we investigate the impact of nanostructuring the sensor electrode surface for enhancing its detection capabilities. We employ self-assembly of the block copolymer polystyrene-block-poly(4-vinylpyridine) to create well defined 2D gold islands via selective impregnation of the pyridine domain with gold precursors and subsequent removal of the template. When matched to the EV length scale, we find a 4-fold improvement in sensitivity despite a 4-fold reduction in area for analyte and ligand anchoring in comparison to a flat sensor surface. Creation of tailored and confined sensing regions interspersed by non-binding silica provides optimal spatial orientation for EV capture with reduced steric effects and negative cooperativity of grafted antibodies, offering a promising route for enhanced binding efficiency and performance of sensor platforms.

This work reports the fabrication of nanomagnetite- and nanotitania-incorporated polyacrylonitrile nanofibers (MTPANs) by an electrospinning process, which has the potential to be used as a membrane material for the selective removal of Cd(II) and As(V) in water. The fiber morphology was characterized by scanning electron microscopy (SEM). The incorporation of nanomagnetite and nanotitania in the composite fiber matrix was confirmed by energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and Fourier transform infrared (FT-IR) spectroscopy. The fibers doped with nanomagnetite and nanotitania (MPAN and TPAN fibers, respectively), as well as MTPAN and neat polycrylonitrile (PAN) fibers, after thermally stabilizing at 275 °C in air, were assessed for their comparative As(V)- and Cd(II)-ion removal capacities. The isotherm studies indicated that the highest adsorption of Cd(II) was shown by MTPAN, following the Langmuir model with a qm of 51.5 mg/m2. On the other hand, MPAN showed the highest As(V)adsorption capacity, following the Freundlich model with a KF of 0.49. The mechanism of adsorption of both Cd(II) and As(V) by fibers was found to be electrostatically driven, which was confirmed by correlating the point of zero charges (PZC) exhibited by fibers with the pH of maximum ion adsorptions. The As(V) adsorption on MPAN occurs by an inner-sphere mechanism, whereas Cd(II) adsorption on MTPAN is via both surface complexation and an As(V)-assisted inner-sphere mechanism. Even though the presence of coexistent cations, Ca(II) and Mg(II), has been shown to affect the Cd(II) removal by MTPAN, the MTPAN structure shows >50% removal efficiency even for minute concentrations (0.5 ppm) of Cd(II) in the presence of high common ion concentrations (10 ppm). Therefore, the novel polyacrylonitrile-based nanofiber material has the potential to be used in polymeric filter materials used in water purification to remove As(V) and Cd(II) simultaneously.

Since its discovery, small interfering RNA (siRNA) has revolutionised the field of gene silencing therapy because of its great potential in targeting diseases that were considered untreatable. Although several siRNA drugs are already in the market, many challenges remain to be addressed before siRNA therapies can realise their full potential including extra-hepatic delivery and improved endosomal escape. Dendritic polypeptides are attractive carriers for siRNA because of their wide range of defined structures that can be made. In this work, we report the on-going development of histidylated poly(lysine) dendrimers (G3KH) as carriers for siRNA. Histidine-capped lysine dendrimers were synthesised via HBTU/HOBt coupling reaction in solution. 1H NMR data confirms the structure of G3KH dendrimers; however, although traces of impurities were also observed. Histidylated lysine dendrimers could efficiently condense short double-strand DNA oligos (used as a model for siRNA) to form cationic nanoparticles of less than 100 nm in size

Extracellular vesicles (EVs) are routinely released from nearly all cell types as transport vehicles and for cell communication. Crucially, they contain biomolecular content for the identification of health and disease states that can be detected from readily accessible physiological fluids, including urine, plasma, or saliva. Despite their clinical utility within noninvasive diagnostic platforms such as liquid biopsies, the currently available portfolio of analytical approaches are challenged by EV heterogeneity in size and composition, as well as the complexity of native biofluids. Quartz crystal microbalance with dissipation monitoring (QCM-D) has recently emerged as a powerful alternative for the phenotypic detection of EVs, offering multiple modes of analyte discrimination by frequency and dissipation. While providing rich data for sensor development, further progress is required to reduce detection limits and fully exploit the technique’s potential within biosensing. Herein, we investigate the impact of nanostructuring the sensor electrode surface for enhancing its detection capabilities. We employ self-assembly of the block copolymer polystyrene-block-poly(4-vinylpyridine) to create well defined 2D gold islands via selective impregnation of the pyridine domain with gold precursors and subsequent removal of the template. When matched to the EV length scale, we find a 4-fold improvement in sensitivity despite a 4-fold reduction in area for analyte and ligand anchoring in comparison to a flat sensor surface. Creation of tailored and confined sensing regions interspersed by non-binding silica provides optimal spatial orientation for EV capture with reduced steric effects and negative cooperativity of grafted antibodies, offering a promising route for enhanced binding efficiency and performance of sensor platforms.

The overexpression of heat shock proteins (HSPs) in tumor cells can activate inherent defense mechanisms during hyperthermia-based treatments, inducing thermoresistance and thus diminishing the treatment efficacy. Here, we report a distinct “non-inhibitor involvement” strategy to address this issue through engineering a calcium-based nanocatalyst (G/A@CaCO3-PEG). The constructed nanocatalyst consists of calcium carbonate (CaCO3)-supported glucose oxidase (GOD) and 2D antimonene quantum dots (AQDs), with further surface modification by lipid bilayers and polyethylene glycol (PEG). The engineered G/A@CaCO3-PEG nanocatalyst features prolonged blood circulation, which is stable at neutral pH but rapidly degrades under mildly acidic tumor microenvironment, resulting in rapid release of drug cargo in the tumor microenvironment. The integrated GOD effectively catalyzes the depletion of glucose for reducing the supplies of adenosine triphosphate (ATP) and subsequent down-regulation of HSP expression. This effect then augments the therapeutic efficacy of photothermal hyperthermia induced by 2D AQDs upon irradiation with near-infrared light as assisted by reversing the cancer cells’ thermoresistance. Consequently, synergistic antineoplastic effects can be achieved via low-temperature photothermal therapy. Systematic in vitro and in vivo evaluations have demonstrated that G/A@CaCO3-PEG nanocatalysts feature potent antitumor activity with a high tumor-inhibition rate (83.92%). This work thus paves an effective way for augmenting the hyperthermia-based tumor treatments via restriction of the ATP supply., Graphical abstract Image 1, Highlights • A concept of “non-inhibitor involvement” strategy is proposed for reversing tumor cell thermoresistance. • The ingenious integration of calcium biomineral and single-element 2D antimonene quantum dots was firstly demonstrated. • The engineered nanocatalysts highlights the high potential of the ATP restriction and HSP inhibition in cancer treatment. • This work provides an effective strategy for augmenting hyperthermia-based treatments efficacy.

Poly(methyl methacrylate) (PMMA) bone cement has been widely used in orthopedic surgeries including total hip/knee replacement, vertebral compression fracture treatment, and bone defect filling. However, aseptic loosening of the interface between PMMA bone cement and bone often leads to failure. Hence, the development of modified PMMA that facilitates the growth of bone into the modified PMMA bone cement is key to reducing the incidence of aseptic loosening. In this study, MgAl-layered double hydroxide (LDH) microsheets modified PMMA (PMMA&LDH) bone cement with superior osseointegration performance has been synthesized. The maximum polymerization reaction temperature of PMMA&LDH decreased by 7.0 and 11.8 °C, respectively, compared with that of PMMA and PMMA&COL-I (mineralized collagen I modified PMMA). The mechanical performance of PMMA&LDH decreased slightly in comparison with PMMA, which is beneficial to alleviate stress-shielding osteolysis, and indirectly promote osseointegration. The superior osteogenic ability of PMMA&LDH has been demonstrated in vivo, which boosts bone growth by 2.17- and 18.34-fold increments compared to the PMMA&COL-I and PMMA groups at 2 months, postoperatively. Moreover, transcriptome sequencing revealed four key osteogenic pathways: p38 MAPK, ERK/MAPK, FGF, and TGF-β, which were further confirmed by IPA, qPCR, and Western blot assays. Hence, LDH-modified PMMA bone cement is a promising biomaterial to enhance bone growth with potential applications in relevant orthopedic surgeries.

Research into extracellular vesicles (EVs) has grown significantly over the last few decades with EVs being widely regarded as a source of biomarkers for human health and disease with massive clinical potential. Secreted by every cell type in the body, EVs report on the internal cellular conditions across all tissue types. Their presence in readily accessible biofluids makes the potential of EV biosensing highly attractive as a noninvasive diagnostic platform via liquid biopsies. However, their small size (50-250 nm), inherent heterogeneity, and the complexity of the native biofluids introduce challenges for effective characterization, thus, limiting their clinical utility. This has led to a surge in the development of various novel EV biosensing techniques, with capabilities beyond those of conventional methods that have been directly transferred from cell biology. In this review, key detection principles used for EV biosensing are summarized, with a focus on some of the most recent and fundamental developments in the field over the last 5 years. This article is categorized under: Diagnostic Tools > Biosensing Diagnostic Tools > In Vitro Nanoparticle-Based Sensing.

Aggregation resulting from the self-association of peptide molecules remains a major challenge during preformulation. Whereas certain organic solvents are known to promote aggregation, ethanol (EtOH) is capable of disrupting interactions between peptide molecules. It is unclear whether it is beneficial or counterproductive to include EtOH in formulations of short peptides. Here, we employed molecular dynamics simulations using the DAFT protocol and MARTINI force field to predict the formation of self-associated dimers and to estimate the stability of a GLP-1-like peptide (G48) in 0–80% aqueous EtOH solutions. Both simulation and experimental data reveal that EtOH leads to a remarkable increase in the conformational stability of the peptide when stored over 15 days at 27 °C. In the absence of EtOH, dimerisation and subsequent loss in conformational stability (α-helix → random coil) were observed. EtOH improved conformational stability by reducing peptide–peptide interactions. The data suggest that a more nuanced approach may be applied in formulation decision making and, if the native state of the peptide is an α-helix organic solvent, such as EtOH, may enhance stability and improve prospects of long-term storage.

Against the backdrop of increased public health awareness, inorganic nanomaterials have been widely explored as promising nanoagents for various kinds of biomedical applications. Layered double hydroxides (LDHs), with versatile physicochemical advantages including excellent biocompatibility, pH-sensitive biodegradability, highly tunable chemical composition and structure, and ease of composite formation with other materials, have shown great promise in biomedical applications. In this review, we comprehensively summarize the recent advances in LDH-based nanomaterials for biomedical applications. Firstly, the material categories and advantages of LDH-based nanomaterials are discussed. The preparation and surface modification of LDH-based nanomaterials, including pristine LDHs, LDH-based nanocomposites and LDH-derived nanomaterials, are then described. Thereafter, we systematically describe the great potential of LDHs in biomedical applications including drug/gene delivery, bioimaging diagnosis, cancer therapy, biosensing, tissue engineering, and anti-bacteria. Finally, on the basis of the current state of the art, we conclude with insights on the remaining challenges and future prospects in this rapidly emerging field.

In this study, a pH-responsive controlled-release mesoporous silica nanoparticle (MSN) formulation was developed. The MSNs were functionalized with a histidine (His)-tagged targeting peptide (B3int) through an amide bond, and loaded with an anticancer drug (cisplatin (CP)) and a lysosomal destabilization mediator (chloroquine (CQ)). Cu2+ was then used to seal the pores of the MSNs via chelation with the His-tag. The resultant nanoparticles showed pH-responsive drug release, and could effectively target tumor cells via the targeting effect of B3int. The presence of CP and Cu2+ permits reactive oxygen species to be generated inside cells; thus, the chemotherapeutic effect of CP is augmented by chemodynamic therapy. In vitro and in vivo experiments showed that the nanoparticles are able to effectively kill tumor cells. An in vivo cancer model revealed that the nanoparticles increase apoptosis in tumor cells, and thereby diminish the tumor volume. No off-target toxicity was noted. It thus appears that the functionalized MSNs developed in this work have great potential for targeted, synergistic anticancer therapies.

This research looked at the management of identity change within Physical Education and School Sport (PESS) at one of the first Free schools in England. Opened as a new institution within an unfami...

The growing demand for water purification provided the initial momentum to produce lanthanide-incorporated nano-hydroxyapatite (HAP) such as HAP·CeO2, HAP·CeO2·La(OH)3 (2:1), and HAP·CeO2·La(OH)3 (3:2). These materials open avenues to remove fluoride and lead ions from contaminated water bodies effectively. Composites of HAP containing CeO2 and La(OH)3 were prepared using in situ wet precipitation of HAP, followed by the addition of Ce(SO4)2 and La(NO3)3 into the same reaction mixture. The resultant solids were tested for the removal of fluoride and lead ions from contaminated water. It was found that the composite HAP·CeO2 shows fluoride and lead ion removal capacities of 185 and 416 mg/g, respectively. The fluoride removal capacity of the composite was improved when La(OH)3 was incorporated and it was observed that the composite HAP·CeO2·La(OH)3 (3:2) has the highest recorded fluoride removal capacity of 625 mg/g. The materials were characterized using scanning electron microscopy–energy-dispersive X-ray (SEM-EDX) spectrometry, Fourier transform infrared (FT-IR) spectrometry, X-ray powder diffractometry (XRD), X-ray photoelectron spectroscopy (XPS), and Brunauer–Emmett–Teller (BET) surface area analysis. Analysis of results showed that Ce and La are incorporated in the HAP matrix. Results of kinetic and leaching analyses indicated a chemisorptive behavior during fluoride and lead ion adsorption by the composites; meanwhile, the thermodynamic profile shows a high degree of feasibility for fluoride and lead adsorption.

The conversion of CaSO₄·0.5H₂O to CaSO₄·2H₂O (gypsum) is of great importance industrially, being the reaction behind plasterboard production and the setting of medical plasters. This hydration process is inherently slow, and to ensure that it occurs on a practical timescale, “seeds” of gypsum are typically added to accelerate the reaction. The seeds used in industry are mostly produced by milling quarried gypsum, resulting in huge variations in their accelerant properties between batches. Here, we develop a bottom-up process to prepare gypsum seeds with a tightly defined morphology, using starch as a templating agent during precipitation from water/ethanol mixtures. When the seeds thereby generated are dried, they tend to aggregate, which results in diminished accelerant properties. The hydration (or setting) time can be markedly reduced if these aggregates are broken up and suspended in a liquid medium. This indicates that directly adding the suspension reaction product to an industrial production line could be a powerful way to accelerate the setting reaction. However, the use of ethanol in the seed synthesis precludes this (because the ethanol would halt the setting reaction). Therefore, a direct one-step process involving evaporation of ethanol was developed to produce gypsum seeds in a water suspension with no ethanol present. The resultant “liquid seeds” are highly potent in accelerating the hydration process of CaSO₄·0.5H₂O to CaSO₄·2H₂O, resulting in shorter setting times than a commercial standard gypsum accelerant.

In this study, hydroxyapatite (HAP) nanocomposites were prepared with chitosan (HAP-CTS), carboxymethyl cellulose (HAP-CMC), alginate (HAP-ALG), and gelatin (HAP-GEL) using a simple wet chemical in situ precipitation method. The synthesized materials were characterized using scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, Brunauer–Emmett–Teller surface area analysis, and thermogravimetric analysis. This revealed the successful synthesis of composites with varied morphologies. The adsorption abilities of the materials toward Pb(II), Cd(II), F–, and As(V) were explored, and HAP-CTS was found to have versatile adsorption properties for all of the ions, across a wide range of concentrations and pH values, and in the presence of common ions found in groundwater. Additionally, X-ray photoelectron spectroscopy and energy-dispersive X-ray spectroscopy confirmed the affinity of HAP-CTS toward multi-ion mixture containing all four ions. HAP-CTS was hence engineered into a more user-friendly form, which can be used to form filters through its combination with cotton and granular activated carbon. A gravity filtration study indicates that the powder form of HAP-CTS is the best sorbent, with the highest breakthrough capacity of 3000, 3000, 2600, and 2000 mL/g for Pb(II), Cd(II), As(V), and F–, respectively. Hence, we propose that HAP-CTS could be a versatile sorbent material for use in water purification.

The restoration of cartilage damage is a slow and not always successful process. Kartogenin (KGN) has significant potential in this space—it is able to induce the chondrogenic differentiation of stem cells and protect articular chondrocytes. In this work, a series of poly(lactic-co-glycolic acid) (PLGA)-based particles loaded with KGN were successfully electrosprayed. In this family of materials, PLGA was blended with a hydrophilic polymer (either polyethyleneglycol (PEG) or polyvinylpyrrolidone (PVP)) to control the release rate. Spherical particles with sizes in the range of 2.4–4.1 µm were fabricated. They were found to comprise amorphous solid dispersions, with high entrapment efficiencies of >93%. The various blends of polymers had a range of release profiles. The PLGA-KGN particles displayed the slowest release rate, and blending with PVP or PEG led to faster release profiles, with most systems giving a high burst release in the first 24 h. The range of release profiles observed offers the potential to provide a precisely tailored profile via preparing physical mixtures of the materials. The formulations are highly cytocompatible with primary human osteoblasts.

Given the increasing interest in the use of peptide- and protein-based agents in therapeutic strategies, it is fundamental to develop delivery systems capable of preserving the biological activity of these molecules upon administration, and which can provide tuneable release profiles. Electrohydrodynamic (EHD) techniques, encompassing electrospinning and electrospraying, allow the generation of fibres and particles with high surface area-to-volume ratios, versatile architectures, and highly controllable release profiles. This review is focused on exploring the potential of different EHD methods (including blend, emulsion, and co /multi-axial electrospinning and electrospraying) for the development of peptide and protein delivery systems. An overview of the principles of each technique is first presented, followed by a survey of the literature on the encapsulation of enzymes, growth factors, antibodies, hormones, and vaccine antigens using EHD approaches. The possibility for localised delivery using stimuli-responsive systems is also explored. Finally, the advantages and challenges with each EHD method are summarised, and the necessary steps for clinical translation and scaled-up production of electrospun and electrosprayed protein delivery systems are discussed.

Electrospinning is a simple route to generate polymer-based fibres with diameters on the nano- to micron-scale. It has been very widely explored in biomedical science for applications including drug delivery systems, diagnostic imaging, theranostics, and tissue engineering. This extensive literature reveals that a diverse range of functional components including small molecule drugs, biologics, and nanoparticles can be incorporated into electrospun fibres, and it is possible to prepare materials with complex compartmentalised architectures. This perspective article briefly introduces the electrospinning technique before considering its potential applications in biomedicine. Particular attention is paid to the translation of electrospinning to the clinic, including the need to produce materials at large scale and the requirement to do so under Good Manufacturing Practice conditions. We finish with a summary of the key current challenges and future perspectives.

Flufenamic acid (FFA) is a highly polymorphic drug molecule with nine crystal structures reported in the Cambridge Structural Database. This study explores the use of synchrotron X-ray powder diffraction combined with differential scanning calorimetry to study crystallization and polymorphic phase transitions upon heating FFA-polymer amorphous solid dispersions (ASDs). Ethyl cellulose (EC, 4 cp) and hydroxypropylmethylcellulose (HPMC) grades with different viscosities and substitution patterns were used to prepare dispersions with FFA at 5:1, 2:1, 1:1, and 1:5 w/w drug/polymer ratios by quench cooling. We employed a 6 cp HPMC 2910 material and two HPMC 2208 samples at 4000 and 100 000 cp. Hyphenated X-ray diffraction (XRD)-differential scanning calorimetry (DSC) studies show that the 6 and 100 000 cp HPMCs and 4 cp EC polymers can stabilize FFA form IV by inhibiting the transition to form I during heating. It appears that the polymers stabilize FFA in both amorphous and metastable forms via a combination of intermolecular interactions and viscosity effects. Increasing the polymer content of the ASD also inhibits polymorphic transitions, with drug/polymer ratios of 1:5 w/w resulting in FFA remaining amorphous during heating. The comparison of FFA ASDs prepared with different samples of HPMCs and ECs suggests that the chemical substitution of the polymer (HPMC 2208 has 19-24% methoxy groups and 4-12% hydroxypropyl groups, while HPMC 2910 has 28-30% methoxy groups and 7-12% hydroxypropyl groups) plays a more significant role in directing polymorphic transitions than the viscosity. A previously unreported polymorph of FFA was also noted during heating but its structure could not be determined.

In this study, a pH-responsive controlled-release mesoporous silica nanoparticle (MSN) formulation was developed. The MSNs were functionalized with a histidine (His)-tagged targeting peptide (B3int) through an amide bond, and loaded with an anticancer drug (cisplatin (CP)) and a lysosomal destabilization mediator (chloroquine (CQ)). Cu

Exosomes are nanosized circulating vesicles that contain biomarkers considered promising for early diagnosis within neurology, cardiology and oncology. Recently, acoustic wave biosensors, in particular based on quartz crystal microbalance with dissipation monitoring (QCM-D), have emerged as a sensitive, label-free, and selective exosome characterisation platform. A rational approach to further improving sensing detection limits relies on the nanostructuration of the sensor surfaces. To this end, inorganic inverse opals (IOs) derived from colloidal self-assembly present a highly tuneable and scalable nanoarchitecture of suitable feature sizes and surface chemistry. This work systematically investigates their use in 2D and 3D for enhanced QCM-D exosome detection. Precise tuning of the architecture parameters delivered improvements in detection performance to sensitivities as low as 6.24 x 10^7 particles/ml. Our findings emphasise that attempts to enhance acoustic immunosensing via increasing the surface area by 3D nanostructuration need to be carefully analyzed in order to exclude solvent and artefact entrapment effects. Moreover, the use of 2D nanostructured electrodes to compartmentalise analyte anchoring presents a particularly promising design principle.

A major reduction in energy consumption and the costs of catalysts will be required in future chemical manufacturing processes. To reach this goal, the transitional metal oxides (TMOs) as photocatalysts under solar energy have been widely studied. Nb₂O5, as a promising photocatalyst, has attracted increasing attention owing to their unique properties. However, the intrinsic large bandgap of Nb₂O5 hinder its potential applications in a variety of fields. Herein, we report an effective and simple strategy to synthesize black mesoporous Nb₂O5-x nanorods (BMNb) with abundant oxygen vacancies. The formation of oxygen vacancy reduces the bandgap of Nb₂O5 which extend the photoresponse from the ultraviolet to the visible and infrared light regions. In addition, The mesoporous structure of BMNb lead to a higher surface area than the as-prepared Nb₂O5 precursor (36.24 m²/g cf 8.69 m²/g). Benefitting from coordinated regulation of structure and composition, the BMNb exhibits better photocatalytic performance than Nb₂O5 in aerobic oxidative coupling of amines to imines under visible light irradiation at room temperature. The yield of BMNb for benzylamine oxidation increases by 63% over the Nb₂O5. This work could open new perspectives to design TMOs with enhanced photocatalytic properties.

A series of new core-shell fibers were developed containing anticancer drugs (5-fluorouracil or ferulic acid) and their cyclodextrin inclusion complexes, with a gadolinium-based magnetic resonance imaging (MRI) contrast agent. These were prepared by electrospinning, a simple method for producing ultra-fine fibers through the application of a strong electrostatic force on a polymer solution. The shell of the fibers was formed from Eudragit S100, and the drugs were loaded in the core. Scanning electron microscopy images showed the formation of smooth ribbon-like fibers, with diameters ranging from 1.4 to 5.1 μm, and transmission electron microscopy reveals a transparent interface between the core and shell compartments. X-ray diffraction and differential scanning calorimetry data confirmed the encapsulation of the drug into the cyclodextrin cavity and the formation of amorphous solid dispersions in the fibers. Drug release from the systems at pH 1 and 7 showed that all the drug loading was released within one hour at pH 1. Based on these results, it is proposed that the relatively low molecular weight drugs were able to diffuse out of the system into the release medium at acidic pH, despite the insolubility of the shell polymer under these conditions. These findings have important implications for the design of electrospun drug delivery systems.

Abstract We report in this work coaxial electrospun fibers with potential applications in the treatment of Parkinson’s disease. The fibers comprise a fixed dose combination (FDC) containing the active ingredients levodopa and carbidopa, loaded in a fast dissolving polyvinylpyrrolidone (PVP) shell and an insoluble but swellable Eudragit® RLPO core. Under appropriate processing conditions we are able to prepare fibers with distinct core/shell architectures and diameters of approximately 400 nm. X-ray diffraction and differential scanning calorimetry analyses revealed that the drugs are dispersed on the molecular level within the polymer carriers, and IR spectroscopy indicated the presence of intermolecular interactions. At pH 1, the composite fibers yields extended release over more than 8 h, with an initial loading dose being freed from the PVP shell and then a sustained release phase following from the insoluble core. This is markedly extended over the release period of the commercial FDC product, and thus the fibers generated here have the potential to be used to reduce the required dosing frequency. Graphic Abstract

Herein, we developed curcumin (Cur)-loaded porous poly­(lactic-co-glycolic acid) (pPLGA) nanoparticles (NPs) by the nanoprecipitation method. Dopamine (DA) was then self-polymerized to form a polydopamine (PDA) layer on the surface of the NPs, yielding Cur@pPLGA/PDA NPs that are able to act as both chemotherapeutic and photothermal agents. These NPs were further camouflaged with the red blood cell membrane (RBCM) to construct RBCM-Cur@pPLGA/PDA NPs. The RBCM-pPLGA/PDA NPs were around 200 nm in size and demonstrated photothermal performance in the near-infrared (NIR) region, with a potent conversion efficiency (35.2%). The blank carrier has favorable cytocompatibility, but when drug loaded the NPs can efficiently induce the death of cancer cells (particularly when combined with NIR laser treatment). Cellular uptake results revealed greater in vitro uptake of RBCM-Cur@pPLGA/PDA NPs than bare Cur@pPLGA/PDA NPs in the case of cancer cells but reduced macrophage phagocytosis. In vivo studies in mice showed that the RBCM-Cur@pPLGA/PDA NPs exhibited prolonged blood circulation times and excellent photothermal properties, allowing tumor-specific chemo-photothermal therapy. The RBCM-Cur@pPLGA/PDA NP platform presents great potential for targeted synergistic cancer treatments.

Transdermal delivery of biological therapeutics is emerging as a potent alternative to intravenous or subcutaneous injections. The latter come with major challenges including patient discomfort, the necessity for trained personnel, specialized sharps disposal, and risk of infection. Microneedle (MN) technology circumvents many of the abovementioned challenges, delivering biological material directly into the skin and allowing sustained release of the active ingredient both in animal models and in humans. This study describes the use of electrohydrodynamic atomization (EHDA) to coat ovalbumin (OVA)-encapsulated PLGA nanoparticles onto hydrogel-forming MN arrays. The particles showed extended release of OVA over ca. 28 days. Microscopic analysis demonstrated that EHDA could generate a uniform particle coating on the MNs, with 30% coating efficiency. Furthermore, the coated MN array manifested similar mechanical characteristics and insertion properties to the uncoated system, suggesting the coating should have no detrimental effects on the application of the MNs. The coated MNs resulted in no significance increase in anti-OVA specific IgG titres in C57BL/6 mice in vivo as compared to the untreated mice (paired t-test, p >0.05) indicating that the formulations are non-immunogenic. The approach of using EHDA to coat a MN array thus appears to have potential as a novel non-invasive protein delivery strategy.

Exosomes are endocytic lipid-membrane bound bodies with the potential to be used as biomarkers in cancer and neurodegenerative disease. The limitations and scarcity of current exosome characterization approaches have led to a growing demand for translational techniques, capable of determining their molecular composition and physical properties in physiological fluids. Here, we investigate label-free immunosensing, using a quartz crystal microbalance with dissipation monitoring (QCM-D), to detect exosomes by exploiting their surface protein profile. Exosomes expressing the transmembrane protein CD63 were isolated by size-exclusion chromatography from cell culture media. QCM-D sensors functionalized with anti-CD63 antibodies formed a direct immunoassay toward CD63-positive exosomes in 75% v/v serum, exhibiting a limit-of-detection of 2.9 × 108 and 1.4 × 108 exosome sized particles (ESPs)/mL for frequency and dissipation response, respectively, i.e., clinically relevant concentrations. Our proof-of-concept findings support the adoption of dual-mode acoustic analysis of exosomes, leveraging both frequency and dissipation monitoring for use in bioanalytical characterization.

The hypoxia of the tumor microenvironment (TME) often hinders the effectiveness of cancer treatments, especially O2-dependent photodynamic therapy (PDT). Methods: An integrated iridium oxide (IrO2)-manganese dioxide (MnO2) nanotheranostic agent was fabricated through bovine serum albumin (BSA)-based biomineralization of Ir3+ and Mn2+. BSA was first covalently modified with chlorin e6 (Ce6), and used to fabricate multifunctional BSA-Ce6@IrO2/MnO2 nanoparticles (NPs) for computed X-ray tomography (CT) and photoacoustic (PA) imaging-guided PDT and photothermal (PTT) therapy of cancer. Extensive in vitro and in vivo studies were performed. Results: The theranostic agent produced can relieve tumor hypoxia by the decomposition of endogenous H2O2 in cancer cells to oxygen. The oxygen generated can be exploited for improved PDT. Paramagnetic Mn2+ released from the NPs in the acidic TME permits magnetic resonance imaging (MRI) to be performed. The exceptional photothermal conversion efficiency (65.3%) and high X-ray absorption coefficient of IrO2 further endow the NPs with the ability to be used in computed CT and PA imaging. Extensive antitumor studies demonstrated that the BSA-Ce6@IrO2/MnO2 nanoplatform inhibits cancer cell growth, particularly after combined PTT and PDT. Systematic in vivo biosafety evaluations confirmed the high biocompatibility of the nanoplatform. Conclusion: This work not only provides a novel strategy for designing albumin-based nanohybrids for theranostic applications but also provides a facile approach for extending the biomedical applications of iridium-based materials.

The biomolecular contents of extracellular vesicles, such as exosomes, have been shown to be crucial in intercellular communication and disease propagation. As a result, there has been a recent surge in the exploration of novel biosensing platforms that can sensitively and specifically detect exosomal content such as proteins and nucleic acids, with a view toward application in diagnostic assays. Here, we demonstrate dual-mode and label-free detection of plasma exosomes using an electrochemical quartz crystal microbalance with dissipation monitoring (EQCM-D). The platform adopts a direct immunosensing approach to effectively capture exosomes via their surface protein expression of CD63. By combining QCM-D with a tandem in situ electrochemical impedance spectroscopy measurement, we are able to demonstrate relationships between mass, viscoelasticity and impedance inducing properties of each functional layer and analyte. In addition to lowering the limit of detection (by a factor of 2-4) to 6.71 × 10

Two-dimensional (2D) nanomaterials able to effectively absorb near-infrared (NIR) radiation have shown considerable potential as multifunctional platforms in the treatment of cancer. Here, we report a molybdenum dioxide (MoO

Bringing together photothermal therapy and chemotherapy (photothermal-chemotherapy, PT-CT) is a highly promising clinical approach but requires the development of intelligent multifunctional delivery vectors. In this work, we prepared mesoporous polydopamine nanoparticles (MPDA NPs) loaded with the chemotherapeutic drug doxorubicin (DOX). These NPs were then coated with the platelet membrane (PLTM). The coated MPDA NPs are spherical and clearly mesoporous in structure. They have a particle size of approximately 184 nm and pore size of ca. 45 nm. The NPs are potent photothermal agents and efficient DOX carriers, with increased rates of drug release observed in vitro in conditions representative of the tumor microenvironment. The NPs are preferentially taken up by cancer cells but not by macrophage cells, and while cytocompatible with healthy cells are highly toxic to cancer cells. An in vivo murine model of human breast cancer revealed that the NPs can markedly slow the growth of a tumor (ca. 9-fold smaller after 14 days' treatment), have extended pharmacokinetics compared to free DOX (with DOX still detectable in the bloodstream after 24 h when the NPs are applied), and are highly targeted with minimal off-site effects on the heart, liver, spleen, kidney, and lungs.

Drug delivery systems are used to carry an active pharmaceutical ingredient (API) in order to improve its properties, for instance enhancing the precision of targeting, protecting it from degradation, or controlling the rate of release. A wide range of inorganic materials can be used to achieve these goals. This chapter will review the key recent developments in this field, with a focus on the four families of materials which have attracted most attention: 3D metal organic frameworks (MOFs), 3D mesoporous silicas (MSNs), 2D layered materials, and 0D inorganic nanoparticles (MNPs). These systems can have a very wide range of physical properties and chemical functionalities. For instance, MOFs and MSNs are porous and thus can offer high drug loadings, while stability varies significantly. MOFs often require functionalisation and protection from rapid degradation prior to cargo delivery, while MSNs and MNPs can persist in vivo. Layered materials also vary widely in stability but can result in effective targeting and extended release profiles. In all cases, the presence of an inorganic species in addition to the API can aid targeting and permit imaging to be performed concomitantly with drug delivery. Post-fabrication functionalisation is also possible, allowing further augmentation of tuning of properties. Inorganic systems thus have huge potential in drug delivery, but there are also very significant barriers to clinical adoption which need to be overcome to allow them to reach their full potential.

Sustained and localized delivery of chemotherapeutics in postoperative cancer treatment leads to a radical improvement in prognosis and a much decreased risk of tumor recurrence. In this work, polydopamine (PDA)-coated superparamagnetic iron oxide nanoparticle (SPION)-loaded polycaprolactone and poly(lactic-co-glycolic acid) fibers were developed as a potential implant to ensure safe and sustained release of the chemotherapeutic drug methotrexate (MTX), as well as provide local contrast for magnetic resonance imaging (MRI). Fibres were prepared by co-axial electrospinning and loaded with MTX-layered double hydroxide (LDH) nanocomposites in the core, yielding organic-inorganic hybrids ranging from 1.23 to 1.48 µm in diameter. After surface coating with PDA, SPIONs were subsequently loaded on the fibre surface and found to be evenly distributed, providing high MRI contrast. In vitro drug release studies showed the PDA coated fibres gave sustained release of MTX over 18 days, and the release profile is responsive to conditions representative of the tumor microenvironment such as slightly acidic pH values or elevated concentrations of the reducing agent glutathione (GSH). In vitro studies with Caco-2 and A549 cells showed highly effective killing with the PDA coated formulations, which was further enhanced at higher levels of GSH. The fibres hence have the potential to act as an implantable drug-eluting platform for the sustained release of cytotoxic agents within a tumor site, providing a novel treatment option for post-operative cancer patients.

Treatment options for neurodegenerative conditions such as Parkinson's disease have included the delivery of cells which release dopamine or neurotrophic factors to the brain. Here, we report the development of a novel approach for protecting cells after implantation into the central nervous system (CNS), by developing dual-layer alginate beads that encapsulate therapeutic cells and release an immunomodulatory compound in a sustained manner. An optimal alginate formulation was selected with a view to providing a sustained physical barrier between engrafted cells and host tissue, enabling exchange of small molecules while blocking components of the host immune response. In addition, a potent immunosuppressant, FK506, was incorporated into the outer layer of alginate beads using electrosprayed poly-ε-caprolactone core-shell nanoparticles with prolonged release profiles. The stiffness, porosity, stability and ability of the alginate beads to support and protect encapsulated SH-SY5Y cells was demonstrated, and the release profile of FK506 and its effect on T-cell proliferation

Layered rare-earth hydroxides have begun to gather increasing attention as potential theranostic platforms owing to their extensive intercalation chemistry combined with magnetic and fluorescent properties. In this work, the potential of layered terbium hydroxide (LTbH) as a platform for simultaneous drug delivery and fluorescence imaging was evaluated. LTbH-Cl ([Tb2(OH)5]Cl·yH2O) was loaded with three nonsteroidal anti-inflammatory drugs (diclofenac, ibuprofen, and naproxen) via ion-exchange. Drug release studies in phosphate buffered saline (pH = 7.4) revealed all three formulations release their drug cargo rapidly over the course of approximately 5 hours. In addition, solid state fluorescence studies indicated that fluorescence intensity is strongly dependent on the identity of the guest anion. It was postulated that this feature may be used to track the extent of drug release from the formulation, which was subsequently successfully demonstrated for the ibuprofen loaded LTbH. Overall, LTbH exhibits good biocompatibility, high drug loading, and a strong, guest-dependent fluorescence signal, all of which are desirable qualities for theranostic applications.

Electrospinning is an inexpensive and powerful method that employs a polymer solution and strong electric field to produce nanofibers. These can be applied in diverse biological and medical applications. Due to their large surface area, controllable surface functionalization and properties, and typically high biocompatibility electrospun nanofibers are recognized as promising materials for the manufacturing of drug delivery systems. Electrospinning offers the potential to formulate poorly soluble drugs as amorphous solid dispersions to improve solubility, bioavailability and targeting of drug release. It is also a successful strategy for the encapsulation of nutraceuticals. This review aims to briefly discuss the concept of electrospinning and recent progress in manufacturing electrospun drug delivery systems. It will further consider in detail the encapsulation of nutraceuticals, particularly probiotics.

Poly(methyl methacrylate) (PMMA) bone cement has been widely used in orthopedic surgeries including total hip/knee replacement, vertebral compression fracture treatment, and bone defect filling. However, aseptic loosening of the interface between PMMA bone cement and bone often leads to failure. Hence, the development of modified PMMA that facilitates the growth of bone into the modified PMMA bone cement is key to reducing the incidence of aseptic loosening. In this study, MgAl-layered double hydroxide (LDH) microsheets modified PMMA (PMMALDH) bone cement with superior osseointegration performance has been synthesized. The maximum polymerization reaction temperature of PMMALDH decreased by 7.0 and 11.8 °C, respectively, compared with that of PMMA and PMMACOL-I (mineralized collagen I modified PMMA). The mechanical performance of PMMALDH decreased slightly in comparison with PMMA, which is beneficial to alleviate stress-shielding osteolysis, and indirectly promote osseointegration. The superior osteogenic ability of PMMALDH has been demonstrated

The socioeconomic impact of osteochondral (OC) damage has been increasing steadily over time in the global population, and the promise of tissue engineering in generating biomimetic tissues replicating the physiological OC environment and architecture has been falling short of its projected potential. The most recent advances in OC tissue engineering are summarised in this work, with a focus on electrospun and 3D printed biomaterials combined with stem cells and biochemical stimuli, to identify what is causing this pitfall between the bench and the patients’ bedside. Even though significant progress has been achieved in electrospinning, 3D-(bio)printing, and induced pluripotent stem cell (iPSC) technologies, it is still challenging to artificially emulate the OC interface and achieve complete regeneration of bone and cartilage tissues. Their intricate architecture and the need for tight spatiotemporal control of cellular and biochemical cues hinder the attainment of long-term functional integration of tissue-engineered constructs. Moreover, this complexity and the high variability in experimental conditions used in different studies undermine the scalability and reproducibility of prospective regenerative medicine solutions. It is clear that further development of standardised, integrative, and economically viable methods regarding scaffold production, cell selection, and additional biochemical and biomechanical stimulation is likely to be the key to accelerate the clinical translation and fill the gap in OC treatment.