Search

Summary A gel-plug system for temporary blocking technology is proposed in this paper to address the prevalent leakage of killing fluid in low-pressure wells; the low technical strength of existing gel plugs for temporary blocking in well killing; difficult-to-control crosslinking time; and gel embrittlement and the difficulty of breaking certain gel plugs. A mixture of etherified galactomannan plant gum, isooctanol polyoxyethylene ether surfactant, and oil phase was used as a thickener. An inorganic salt complex containing long-chain polyhydroxy alcohol was used as a crosslinker and the concentration of long-chain polyhydroxy alcohol far exceeds the theoretical amount required to complex the metal ion. A mixture of polyhydroxy alcohol with a small amount of weak acid was used as a crosslinking regulator. Finally, a mixture of sodium thiosulfate and long-chain quaternary ammonium salt surfactant was used as a stabilizer. Laboratory evaluations showed that this gel-plug system can be directly pumped into the wellbore after being mixed homogeneously, and the viscosity of the system on the surface can be controlled by the amount of crosslinking regulator. The viscosity of the gel-plug system after gelling was high (viscoelastic solid colloid); the initial viscosity reached 30 000 mPa·s at 120°C and retained a semisolid gel shape after aging for 72 hours. Right-angle thickening occurred when the gel warmed to target-zone temperature. The acidic liquid breaker acted quickly, and the viscosity of the broken fluid was lower than 5 mPa·s after 1 to 4 hours. This gel plug for temporary blocking and well-killing technology was successfully applied in a low-pressure, leakage-prone gas well. No gas, pressure, or liquid remained in the open well after killing, the wellhead was successfully replaced, and the tubing was successfully removed. The gel plug also exhibited self-healing: The hole formed by the tubing could be filled and sealed automatically by the gel plug in the annulus. The static friction (outer wall) of 73-mm tubing in the gel plug was 39.6 t/km; the dynamic friction (outer wall) after tubing removal was 7.2 t/km. This gel plug thus shows promise as a temporary blocking technology in workover operations of low-pressure, leakage-prone gas wells.

CBT-Cys click condensation reaction has a high second-order reaction rate constant and has found wide applicability in recent years., CBT-Cys click condensation reaction has a high second-order reaction rate constant and has found wide applicability in recent years. However, its reaction mechanism has not been experimentally validated and its application for identifying bioactive N-terminal Cys peptides in real clinical samples has not been reported. Herein, firstly, by employing induced nanoelectrospray ionization-mass spectrometry (InESI-MS) and a home-built micro-reactor, we successfully intercepted and structurally characterized the crucial intermediate in this click reaction for the first time. With the intermediate, the proposed mechanism of this reaction was corroborated. Moreover, we also applied this MS setup to monitor the reaction in real time and obtained the second-order reaction rate constants of this reaction at different pH values. After mechanistic study, we applied this click reaction for identifying bioactive N-terminal cysteine peptides in amniotic fluid (AF). Eight unique N-terminal Cys peptides in AF, three of which are located in the functional domain regions of their corresponding proteins, were identified with a false positive rate less than 1%. One of the three peptides was found able to inhibit the growth of uterine endometrial cancer HEC-1-B cells but not the endometrial normal cells via a typical apoptotic pathway. With its mechanism satisfactorily elucidated, the kinetic parameters obtained, as well as its application for fishing bioactive N-terminal Cys peptides from vast complex clinical samples, we anticipate that this CBT-Cys click reaction could be applied more widely for the facile isolation, site-specific identification, and quantification of N-terminal Cys-containing peptides in complex biological samples.

In this study, the problem of iterative learning control for a class of non-linear switched systems with arbitrary switched rules is considered. It is assumed that the considered switched systems are operated during a finite-time interval repetitively, and then the iterative learning control scheme can be introduced. It is also shown that under some given conditions, the D-type iterative learning control law can guarantee the asymptotic convergence of the tracking error between the desired output and the actual output for the entire time interval through the iterative learning process. Two examples are given to illustrate the effectiveness of the proposed approach.

This paper considers the stability of high-order PID-type iterative learning control law for a class of nonlinear switched systems with state delays and arbitrary switched rules, which perform a given task repeatedly. The stability condition for the proposed high-order learning control law is first established, and then the stability is analyzed based on contraction mapping approach in the sense ofλnorm. It is shown that the proposed iterative learning control law can guarantee the asymptotic convergence of the tracking error for the entire time interval through the iterative learning process. Two examples are given to illustrate the effectiveness of the proposed approach.