4 results on '"Fisch, Philipp"'
Search Results
2. 3D-Printed Reinforcement Scaffolds with Targeted Biodegradation Properties for the Tissue Engineering of Articular Cartilage
- Author
-
Tosoratti, Enrico, Fisch, Philipp, Taylor, Scott, Laurent-Applegate, Lee Ann, and Zenobi-Wong, Marcy
- Subjects
enzymatically crosslinked hydrogels ,3D-printing ,hybrid reinforcement scaffolds ,cartilage engineering ,lactide-copolymers - Abstract
Achieving regeneration of articular cartilage is challenging due to the low healing capacity of the tissue. Appropriate selection of cell source, hydrogel, and scaffold materials are critical to obtain good integration and long-term stability of implants in native tissues. Specifically, biomechanical stability and in vivo integration can be improved if the rate of degradation of the scaffold material matches the stiffening of the sample by extracellular matrix secretion of the encapsulated cells. To this end, a novel 3D-printed lactide copolymer is presented as a reinforcement scaffold for an enzymatically crosslinked hyaluronic acid hydrogel. In this system, the biodegradable properties of the reinforced scaffold are matched to the matrix deposition of articular chondrocytes embedded in the hydrogel. The lactide reinforcement provides stability to the soft hydrogel in the early stages, allowing the composite to be directly implanted in vivo with no need for a preculture period. Compared to pure cellular hydrogels, maturation and matrix secretion remain unaffected by the reinforced scaffold. Furthermore, excellent biocompatibility and production of glycosaminoglycans and collagens are observed at all timepoints. Finally, in vivo subcutaneous implantation in nude mice shows cartilage-like tissue maturation, indicating the possibility for the use of these composite materials in one-step surgical procedures., Advanced Healthcare Materials, 10 (23), ISSN:2192-2640, ISSN:2192-2659
- Published
- 2021
3. Cell-Laden Agarose-Collagen Composite Hydrogels for Mechanotransduction Studies
- Author
-
Cambria, Elena, Brunner, Silvio, Heusser, Sally, Fisch, Philipp, Hitzl, Wolfgang, Ferguson, Stephen J., and Würtz-Kozak, Karin
- Subjects
Mechanobiology ,Blended hydrogels ,Agarose ,Focal adhesion kinase ,Collagen ,Extracellular matrix ,Dynamic compression - Abstract
The increasing investigation of cellular mechanotransduction mechanisms requires biomaterials combining biofunctionality and suitable mechanical properties. Agarose is a standard biomaterial for cartilage and intervertebral disc mechanobiology studies, but lacks adhesion motifs and the necessary cell-matrix interaction for mechanotransduction. Here, collagen type I was blended at two concentrations (2 and 4.5 mg/mL) with agarose 2% wt/vol. The composite hydrogels were characterized in terms of structural homogeneity, rheological properties and size stability. Nucleus pulposus (NP) cell viability, proliferation, morphology, gene expression, GAG production, adhesion and mechanotransduction ability were further tested. Blended hydrogels presented a homogenous network of the two polymers. While the addition of 4.5 mg/mL collagen significantly decreased the storage modulus and increased the loss modulus of the gels, blended gels containing 2 mg/mL collagen displayed similar mechanical properties to agarose. Hydrogel size was conserved over 21 days for all agarose-based gels. Embedded cells were viable (>80%) and presented reduced proliferation and a round morphology typical of NP cells in vivo. Gene expression of collagen types I and II and aggrecan significantly increased in blended hydrogels from day 1 to 7, further resulting in a significantly superior GAG/DNA ratio compared to agarose gels at day 7. Agarose-collagen hydrogels not only promoted cell adhesion, contrary to agarose gels, but also showed a 5.36-fold higher focal adhesion kinase phosphorylation (pFAK/β-tubulin) when not compressed, and increased pFAK/FAK values 10 min after compression. Agarose-collagen thus outperforms agarose, mimics native tissues constituted of non-fibrillar matrix and collagens, and allows exploring complex loading in a highly reproducible system., Frontiers in Bioengineering and Biotechnology, 8, ISSN:2296-4185
- Published
- 2020
- Full Text
- View/download PDF
4. Improved accuracy and precision of bioprinting through progressive cavity pump-controlled extrusion
- Author
-
Fisch, Philipp, Holub, Martin, and Zenobi-Wong, Marcy
- Subjects
gelatin ,pneumatic extrusion ,micro-extrusion bioprinting ,alginate ,progressive cavity pump ,bioprinting ,3. Good health ,gellan gum - Abstract
3D bioprinting has seen a tremendous growth in recent years in a variety of fields such as tissue engineering, drug testing and regenerative medicine, which has led researchers and manufacturers to continuously advance and develop novel bioprinting techniques and materials. Although new bioprinting methods are emerging (e.g. contactless and volumetric bioprinting), micro-extrusion bioprinting remains the most widely used method. Micro-extrusion bioprinting, however, is still largely dependent on the conventional pneumatic extrusion process, which relies heavily on homogenous biomaterial inks and bioinks to maintain a constant material flow rate. Augmenting the functionality of the bioink with the addition of nanoparticles, cells or biopolymers can induce inhomogeneities resulting in uneven material flow during printing and/or clogging of the nozzle, leading to defects in the printed construct. In this work, we evaluated a novel extrusion technique based on a miniaturized progressive cavity pump (PCP) which allows precise control over the volumetric flow rate by positive displacement. We compared the accuracy and precision of this system to the pneumatic extrusion system and tested both systems for their effect on cell viability after extrusion. The PCP achieved a significantly higher accuracy and precision compared to the pneumatic system, while maintaining good viability. These improvements were independent of the bioink composition, printing speed or nozzle size. This study demonstrates the merit of precise extrusion-process control in bioprinting by PCPs and investigates their influence on process-induced cell damage. PCPs are a promising tool for bioprinting and could help provide standardized and validated bioprinted constructs while leaving the researcher more freedom in the design of the bioinks., Biofabrication, 13 (1), ISSN:1758-5082, ISSN:1758-5090
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.