Search

ESO, in collaboration with the Breakthrough Initiatives, has modified the VLT mid-infrared imager VISIR to greatly enhance its ability as a planet finder. It has conducted a 100-hour observing campaign to search for low-mass planets around both components of the binary a Centauri, part of the closest stellar system to the Earth. Using adaptive optics and high-performance coronagraphy, the instrument reached unprecedented contrast and sensitivity allowing it to see Neptune-sized planets in the habitable zone, if present. The experiment allowed us to characterise the current limitations of the instrument. We conclude that the detection of rocky planets similar to Earth in the habitable zone of the a Centauri System is already possible with 8-metre-class telescopes in the thermal infrared., Published in The Messenger vol. 178, pp. 5-9, December 2019.

We present an overview of the VISIR instrument after its upgrade and return to science operations. VISIR is the midinfrared imager and spectrograph at ESO’s VLT. The project team is comprised of ESO staff and members of the original VISIR consortium: CEA Saclay and ASTRON. The project plan was based on input from the ESO user community with the goal of enhancing the scientific performance and efficiency of VISIR by a combination of measures: installation of improved hardware, optimization of instrument operations and software support. The cornerstone of the upgrade is the 1k by 1k Si:As AQUARIUS detector array manufactured by Raytheon. In addition, a new prism spectroscopic mode covers the whole N-band in a single observation. Finally, new scientific capabilities for high resolution and high-contrast imaging are offered by sub-aperture mask and coronagraphic modes. In order to make optimal use of favourable atmospheric conditions, a water vapour monitor has been deployed on Paranal, allowing for real-time decisions and the introduction of a user-defined constraint on water vapour. During the commissioning in 2012, it was found that the on-sky sensitivity of the AQUARIUS detector was significantly below expectations. Extensive testing of the detector arrays in the laboratory and on-sky enabled us to diagnose the cause for the shortcoming of the detector as excess low frequency noise. It is inherent to the design chosen for this detector and cannot be remedied by changing the detector set-up. Since this is a form of correlated noise, its impact can be limited by modulating the scene recorded by the detector. After careful analysis, we have implemented fast (up to 4 Hz) chopping with field stabilization using the secondary mirror of the VLT. During commissioning, the upgraded VISIR has been confirmed to be more sensitive than the old instrument, and in particular for low-resolution spectroscopy in the N-band, a gain of a factor 6 is realized in observing efficiency. After overcoming several additional technical problems, VISIR is back in Science Operations since April 2015. In addition an upgrade of the IT infrastructure related to VISIR has been conducted in order to support burst-mode operations. Science Verification of the new modes was performed in Feb 2016. The upgraded VISIR is a powerful instrument providing close to background limited performance for diffraction-limited observations at an 8-m telescope. It offers synergies with facilities such as ALMA, JWST, VLTI and SOFIA, while a wealth of targets is available from survey works like WISE. In addition, it will bring confirmation of the technical readiness and scientific value of several aspects for future mid-IR instrumentation at Extremely Large Telescopes. We also present several lessons learned during the project.

International audience; The Active Phasing Experiment (APE) has been used by ESO to gain experience in controlling segmented primary mirrors in preparation for the European Extremely Large Telescope. The experiment tested various phasing techniques and explored their advantages and limitations. Four optical phasing sensors were developed using different techniques — a curvature sensor, a pyramid sensor, a Shack-Hartmann sensor and a sensor based on a modified Mach-Zehnder interferometer. The design of the APE instrument is described. APE was installed at the VLT visitor focus for on-sky testing and a brief summary of the results of the experiment is given.