Search

This paper describes the fabrication process and characteristics of dimension- and position-controlled gallium nitride (GaN) microstructure arrays grown on graphene films and their quantum structures for use in flexible light-emitting device applications. The characteristics of dimension- and position-controlled growth, which is crucial to fabricate high-performance electronic and optoelectronic devices, were investigated using scanning and transmission electron microscopes and power-dependent photoluminescence spectroscopy measurements. Among the GaN microstructures, GaN microrods exhibited excellent photoluminescence characteristics including room-temperature stimulated emission, which is especially useful for optoelectronic device applications. As one of the device applications of the position-controlled GaN microrod arrays, we fabricated light-emitting diodes (LEDs) by heteroepitaxially growing InxGa1−xN/GaN multiple quantum wells (MQWs) and a p-type GaN layer on the surfaces of GaN microrods and by depositing Ti/Au and Ni/Au metal layers to prepare n-type and p-type ohmic contacts, respectively. Furthermore, the GaN microrod LED arrays were transferred onto Cu foil by using the chemical lift-off method. Even after being transferred onto the flexible Cu foil substrate, the microrod LEDs exhibited strong emission of visible blue light. The proposed method to enable the dimension- and position-controlled growth of GaN microstructures on graphene films can likely be used to fabricate other high-quality flexible inorganic semiconductor devices such as micro-LED displays with an ultrahigh resolution.

We report the van der Waals integration of micropatterned GaN light-emitting diodes (LEDs) onto foreign graphene films. GaN micro-LEDs were selectively grown on a graphene substrate using a patterned SiO2 mask, and then the whole device structure was laterally fixed by a polyimide insulator to form a united layer. After device fabrication, the LED/graphene heterostructure device was piled on the foreign graphene layers using a typical wet transfer technique of 2D crystals where the bottom graphene layer of the heterostructure was adhered to the foreign graphene only by van der Waals interactions. The transferred micro-LEDs showed well-aligned crystallographic orientations as well as reliable device performances, including strong light emissions, good rectifying behaviors of the current density–voltage curve, and good simultaneity between the electroluminescence intensity and the applied currents, ensuring reliable electrical connections and mechanical adhesions of the light-emitting layer to the foreign graphene films. Furthermore, the reliable adhesiveness allowed us to achieve device wearability, while the LEDs exhibited homogeneous light emissions under various bending conditions because of negligible external stress in the discrete micro-LEDs.

We report monolithic integration of indium arsenide (InAs) nanorods and zinc oxide (ZnO) nanotubes using a multilayer graphene film as a suspended substrate, and the fabrication of dual-wavelength photodetectors with the hybrid configuration of these materials. For the hybrid nanostructures, ZnO nanotubes and InAs nanorods were grown vertically on the top and bottom surfaces of the graphene films by metal-organic vapor-phase epitaxy and molecular beam epitaxy, respectively. The structural, optical, and electrical characteristics of the hybrid nanostructures were investigated using transmission electron microscopy, spectral photoresponse analysis, and current–voltage measurements. Furthermore, the hybrid nanostructures were used to fabricate dual-wavelength photodetectors sensitive to both ultraviolet and mid-infrared wavelengths. Wide- and narrow-bandgap semiconductor nanostructures were monolithically integrated on graphene layers by direct heteroepitaxial growth. The structural, optical, and electrical characteristics of the hybrid nanostructures were investigated. Furthermore, dual-wavelength photodetectors sensitive to both ultraviolet and mid-infrared wavelengths were fabricated using the hybrid nanostructures.

We report laser emission from gallium nitride (GaN) microrods that are introduced into mammalian cells and the application of these microrods for cell labeling. GaN microrods were grown on graphene-coated SiO2/Si substrates by metal-organic vapor phase epitaxy. The GaN microrods are easily detached from the substrates because of the weakness of the van der Waals forces between GaN and graphene. The uptake of microrods into HeLa cells via endocytosis and viability after uptake were investigated. Normal cellular activities, including migration and division, were observed over 2 weeks in culture. Furthermore, the photoluminescence spectra of the internalized microrods exhibited sharp laser emission peaks with a low lasing threshold of 270 kW/cm2. A new technique for placing tiny lasers inside living cells could make it easier to selectively label targets during microscopy. Gyu-Chul Yi from Seoul National University in South Korea and colleagues report a procedure for growing gallium nitride (GaN), a biocompatible inorganic crystal capable of laser emission, into microscale rods. The team demonstrated that this morphology enabled the GaN crystals to be taken up into human cells in cell culture with no adverse effects on processes such as cell division. Optical characterization of the GaN-containing cells revealed they could emit narrow-band laser light using only moderate levels of excitation power. Because individual microrods could be identified by unique wavelength and intensity features in their laser spectra, this approach may prove advantageous for tagging and tracking large numbers of cells in complex environments. We demonstrate intracellular GaN microrod lasers for cell labeling applications. GaN microrods show excellent lasing signals under intracellular conditions with a low lasing threshold (~270 kW/cm2). The lasing spectra from individual intracellular microrods are distinguishable because each GaN microrod has different lasing peak wavelength, mode spacings, and relative PL intensities. This result suggests that GaN microrods can be candidates for cell labeling applications.

We report flexible and monolithically integrated multicolor light-emitting diode (LED) arrays using morphology-controlled growth of GaN microstructures on chemical-vapor-deposited (CVD) graphene films. As the morphology-controlled growth template of GaN microstructures, we used position-controlled ZnO nanostructure arrays with different spacings grown on graphene substrates. In particular, we investigated the effect of the growth parameters, including micropattern spacings and growth time and temperature, on the morphology of the GaN microstructures when they were coated on ZnO nanostructures on graphene substrates. By optimizing the growth parameters, both GaN microrods and micropyramids formed simultaneously on the graphene substrates. Subsequent depositions of InGaN/GaN quantum well and p-GaN layers and n- and p-type metallization yielded monolithic integration of microstructural LED arrays on the same substrate, which enabled multicolor emission depending on the shape of the microstructures. Furthermore, the CVD graphene substrates beneath the microstructure LEDs facilitated transfer of the LED arrays onto any foreign substrate. In this study, Cu foil was used for flexible LEDs. The flexible devices exhibited stable electroluminescence, even under severe bending conditions. Cyclic bending tests demonstrated the excellent mechanical stability and reliability of the devices.

We demonstrate the epitaxial growth of three-dimensional (3D) GaN single crystal arrays through metal–organic vapor phase epitaxy (MOVPE) on lattice-matched ZnO templates that were achieved via hydrothermal growth in which we controlled the position, size and morphology of the layer. To prevent collapse of the crystals during MOVPE growth, graphene sheets were employed as a protection/mask layer, and initial GaN growth was performed at a relatively low temperature under hydrogen-depleted conditions. Temperature-dependent growth behaviors of GaN crystals on diverse types of ZnO templates can facilitate the control of hexagonal crystal shapes including pencil, tent and plate shapes. Furthermore, a 3D light emitting crystal array was demonstrated through subsequent growth of high-quality n-type and p-type GaN layers.

Electrocorticography (ECoG) is a powerful tool for direct mapping of local field potentials from the brain surface. Progress in development of high-fidelity materials such as poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) on thin conformal substrates such as parylene C enabled intimate contact with cortical surfaces and higher quality recordings from small volumes of neurons. Meanwhile, stimulation of neuronal activity is conventionally accomplished with electrical microstimulation and transcranial magnetic stimulation that can be combined with ECoG to form the basis of bidirectional neural interface. However, these stimulation mechanisms are less controlled and primitively understood on the local and cellular levels. With the advent of optogenetics, the localization and specificity of neuronal stimulation and inhibition is possible. Therefore, the development of integrated devices that can merge the sensitivity of ECoG or depth recording with optogenetic tools can lead to newer frontiers in understanding the neuronal activity. Herein, we introduce a hybrid device comprising flexible inorganic LED arrays integrated PEDOT:PSS/parylene C microelectrode arrays for high resolution bidirectional neuronal interfaces. The flexible inorganic LEDs have been developed by the metal-organic vapor phase epitaxy of position-controlled GaN microLEDs on ZnO nanostructured templates pre-grown at precise locations on a graphene layer. By transferring it onto the microelectrode arrays, it can provides the individual electrical addressability by light stimulation patterns. We will present experimental and simulation results on the optoelectronic characteristics and light activation capability of flexible microLEDs and their evaluation in vivo.