Search

Gold nanorods possess optical properties that are tunable and highly sensitive to variations in their aspect ratio (length/width). Therefore, the development of a sensing platform where the gold nanorod morphology (i.e., aspect ratio) is modulated in response to an analyte holds promise in achieving ultralow detection limits. Here, we use a dithiol peptide as an enzyme substrate during nanorod growth. The sensing mechanism is enabled by the substrate design, where the dithiol peptide contains an enzyme cleavage site in-between cysteine amino acids. When cleaved, the peptide dramatically impacts gold nanorod growth and the resulting optical properties. We demonstrate that the optical response can be correlated with enzyme concentration and achieve a 45 pM limit of detection. Furthermore, we extend this sensing platform to colorimetrically detect tumor-associated inhibitors in a biologically relevant medium. Overall, these results present a subnanomolar method to detect proteases that are critical biomarkers found in cancers, infectious diseases, and inflammatory disorders.

Nucleic acids are well-established biomarkers of cancer with immense value in diagnostics and basic research. However, strategies to monitor these species in tissue can be challenging due to the need for amplification of imaging signal from low analyte concentrations with high specificity. Photoacoustic (PA) imaging is gaining traction for molecular imaging of proteins, small biomolecules, and nucleic acids by coupling pulsed near-infrared (NIR) excitation with broadband acoustic detection. This work introduces a PA nucleic acid contrast agent that harnesses NIR fluorophore and quencher-tagged hybridization chain reaction (HCR) for signal amplification. This HCR probe was designed to enable contact quenching between NIR dye-quencher pairs by coercing their direct alignment when miR-21, a microRNA cancer biomarker, is detected. The probe demonstrated a ratiometric PA limit of detection of 148 pM miR-21, sequence specificity against one- and two-base mutations, and selectivity over other microRNAs. It was further tested in live human ovarian cancer (SKOV3) and noncancerous (HEK 293T) cells to exemplify in situ PA activation based on differences in endogenous miR-21 regulation (p = 0.0002). The probe was lastly tested in tissue mimicking phantoms to exemplify sustained contrast in centimeter-range depths and 85.3% photostability after 15 min of laser irradiation. The probe's miR-21-specific activation and its ability to maintain contrast in biologically relevant absorbing and scattering media support its consideration for live-cell PA microscopy and potential cancer diagnostics. Results from this probe also underscore the combined detection power between ratiometric PA signaling and strand amplification for more sensitive DNA-based PA sensors.

Organic nanomaterials increasingly generate interest from diverse fields spanning fundamental and clinical research, biotechnology, and nanomedicine. Organic nanomaterials are exceptionally versatile, with applications in several domains: molecular imaging, pharmaceutical formulations, and imageguided therapies. Unlike inorganic nanomaterials, these materials offer distinct advantages, such as facile tunability in composition or surface functionalization, excellent biocompatibility, controlled release, and so on. Here, motivated by the considerable development and application of organic nanomaterials in life science, we summarize recent progress in using organic nanomaterials for bioimaging, drug delivery, and therapy.

Facemasks in congregate settings prevent the transmission of SARS-CoV-2 and help control the ongoing COVID-19 global pandemic because face coverings can arrest transmission of respiratory droplets. While many groups have studied face coverings as personal protective equipment, these respiratory droplets can also serve as a diagnostic fluid to report on health state; surprisingly, studies of face coverings from this perspective are quite limited. Here, we determined the concentration and distribution of aerosolized saliva (via α-amylase levels) captured on various face coverings. Our results showed that α-amylase accumulated on face coverings in a time-dependent way albeit at different levels, e.g., neck gaiters and surgical masks captured about 3-fold more α-amylase than cloth masks and N95 respirators. In addition, the saliva aerosols were primarily detected on the inner layer of multilayered face coverings. We also found that the distribution of salivary droplets on the mask correlated with the morphologies of face coverings as well as their coherence to the face curvature. These findings motivated us to extend this work and build multifunctional sensing strips capable of detecting biomarkers in situ to create “smart” masks. The work highlights that face coverings are promising platforms for biofluid collection and colorimetric biosensing, which bode well for developing surveillance tools for airborne diseases.

Porphyromonas gingivalis is a keystone pathogen in periodontal disease. We herein report a dual-modal fluorescent and photoacoustic imaging probe for the detection of gingipain proteases secreted by P. gingivalis. Upon proteolytic cleavage by Arg-specific gingipain (RgpB), five-fold photoacoustic enhancement and100-fold fluorescence activation was measured with detection limits of 1.1 nM RgpB and 5.0E4 CFU mL

The transmission of SARS-CoV-2 coronavirus has led to the COVID-19 pandemic. Nucleic acid testing while specific has limitations for mass surveillance. One alternative is the main protease (M(pro)) due to its functional importance in mediating the viral life cycle. Here, we describe a combination of modular substrate and gold colloids to detect M(pro) via visual readout. The strategy involves zwitterionic peptide that carries opposite charges at the C-/N-terminus to exploit the specific recognition by M(pro). Autolytic cleavage releases positively-charged moiety that assembles the nanoparticles with rapid color changes (t

There is a need for surveillance of COVID-19 to identify individuals infected with SARS-CoV-2 coronavirus. Although specific, nucleic acid testing has limitations in terms of point-of-care testing. One potential alternative is the nonstructural protease (nsp5, also known as Mpro/3CLpro) implicated in SARS-CoV-2 viral replication but not incorporated into virions. Here, we report a divalent substrate with a novel design, (Cys)2–(AA)x–(Asp)3, to interface gold colloids in the specific presence of Mpro leading to a rapid and colorimetric readout. Citrate- and tris(2-carboxyethyl)phosphine (TCEP)-AuNPs were identified as the best reporter out of the 17 ligated nanoparticles. Furthermore, we empirically determined the effects of varying cysteine valence and biological media on the sensor specificity and sensitivity. The divalent peptide was specific to Mpro, that is, there was no response when tested with other proteins or enzymes. Furthermore, the Mpro detection limits in Tris buffer and exhaled breath matrices are 12.2 and 18.9 nM, respectively, which are comparable to other reported methods (i.e., at low nanomolar concentrations) yet with a rapid and visual readout. These results from our work would provide informative rationales to design a practical and noninvasive alternative for COVID-19 diagnostic testing—the presence of viral proteases in biofluids is validated.

Periodontal disease affects nearly 50% of Americans but diagnostic methods have remained the same for decades. Periodontal examination via physical probing provides critical metrics such as pocket depth, clinical attachment level, and gingival recession; however, this practice is time consuming, variable, and often painful. In this study, we investigated high-frequency ultrasound (40 MHz) for the image-based measurement of periodontal metrics. Imaging was performed at midbuccal sites for a set of periodontally healthy (n = 10) and diseased (n = 6) subjects and image-based measurements were compared to gold-standard physical probing measurements. Human operators identified relevant markers (e.g., cementoenamel junction, gingival margin, alveolar bone crest) in B-mode ultrasound images from 66 teeth to calculate gingival height and alveolar bone level. These metrics were correlated to clinical measurements of probing pocket depth and clinical attachment level for disease staging (1.57-mm bias and 0.25-mm bias, respectively). Interoperator bias was negligible (

Ulcers including pressure ulcers and diabetic foot ulcers damage the skin and underlying tissue in people with compromised blood circulation. They are classified into four stages of severity and span from mild reddening of the skin to tissue damage and muscle/bone infections. Here, we used photoacoustic imaging as a noninvasive method for detecting early tissue damage that cannot be visually observed while also staging the disease using quantitative image analysis. We used a mouse model of pressure ulcers by implanting subdermal magnets in the dorsal flank and periodically applying an external magnet to the healed implant site. The magnet-induced pressure was applied in cycles, and the extent of ulceration was dictated by the number of cycles. We used both laser- and light-emitting diode (LED)-based photoacoustic imaging tools with 690 nm excitation to evaluate the change in photoacoustic signal and depth of injury. Using laser-based photoacoustic imaging system, we found a 4.4-fold increase in the photoacoustic intensity in stage I vs. baseline (no pressure). We also evaluated the depth of injury using photoacoustics. We measured a photoacoustic ulcer depth of 0.38 ± 0.09 mm, 0.74 ± 0.11 mm, 1.63 ± 0.4 mm, and 2.7 ± 0.31 mm (n = 4) for stages I–IV, respectively. The photoacoustic depth differences between each stage were significant (p < 0.05). We also used an LED-based photoacoustic imaging system to detect early stage (stage I) pressure ulcers and observed a 2.5-fold increase in photoacoustic signal. Importantly, we confirmed the capacity of this technique to detect dysregulated skin even before stage I ulcers have erupted. We also observed significant changes in photoacoustic intensity during healing suggesting that this approach can monitor therapy. These findings were confirmed with histology. These results suggest that this photoacoustic-based approach might have clinical value for monitoring skin diseases including pressure ulcers.

The preclinical landscape of photoacoustic imaging has experienced tremendous growth in the past decade. This non-invasive imaging modality augments the spatiotemporal capabilities of ultrasound with optical contrast. While it has principally been investigated for diagnostic applications, many recent reports have described theranostic delivery systems and drug monitoring strategies using photoacoustics. Here, we provide an overview of the of the progress to date while highlighting work in three specific areas: theranostic nanoparticles, real-time drug monitoring, and stem cell (“living drug”) tracking. Additionally, we discuss the challenges that remain to be addressed in this burgeoning field.

A longstanding problem with conventional cancer therapy is the nonspecific distribution of chemotherapeutics. Monitoring drug release in vivo via noninvasive bioimaging can thus have value, but it is difficult to distinguish loaded from released drug in live tissue. Here, this work describes an injectable supramolecular hydrogel that allows slow and trackable release of doxorubicin (Dox) via photoacoustic (PA) tomography. Dox is covalently linked with photoacoustic methylene blue (MB) to monitor Dox before, during, and after release from the hydrogel carrier. The conjugate (MB-Dox) possesses an IC50 of 161.4 × 10

Photoacoustic (PA) imaging holds great promise as a noninvasive imaging modality. Gold nanorods (GNRs) with absorption in the second near-infrared (NIR-II) window have emerged as excellent PA probes because of their tunable optical absorption, surface modifiability, and low toxicity. However, pristine GNRs often undergo shape transition upon laser illumination due to thermodynamic instability, leading to a reduced PA signal after a few seconds of imaging. Here, we report monodisperse GNR-melanin nanohybrids where a tunable polydopamine (PDA) coating was conformally coated on GNRs. GNR@PDAs showed a threefold higher PA signal than pristine GNRs due to the increased optical absorption, cross-sectional area, and thermal confinement. More importantly, the PA signal of GNR@PDAs only decreased by 29% during the 5 min of laser illumination in the NIR-II window, while significant attenuation (77%) was observed for GNRs. The GNR@PDAs maintained 87% of its original PA signal in vivo even after 10 min of laser illumination. This PDA-enabled strategy affords a rational design for robust PA imaging probes and provides more opportunities for other types of photomediated biomedicines, such as photothermal and photodynamic regimens.

Simultaneous visualization of the teeth and periodontium is of significant clinical interest for image-based monitoring of periodontal health. We recently reported the application of a dual-modality photoacoustic-ultrasound (PA-US) imaging system for resolving periodontal anatomy and periodontal pocket depths in humans. This work utilized a linear array transducer attached to a stepper motor to generate 3D images via maximum intensity projection. This prior work also used a medical head immobilizer to reduce artifacts during volume rendering caused by motion from the subject (e.g., breathing, minor head movements). However, this solution does not completely eliminate motion artifacts while also complicating the imaging procedure and causing patient discomfort. To address this issue, we report the implementation of an image registration technique to correctly align B-mode PA-US images and generate artifact-free 2D cross-sections. Application of the deshaking technique to PA phantoms revealed 80% similarity to the ground truth when shaking was intentionally applied during stepper motor scans. Images from handheld sweeps could also be deshaken using an LED PA-US scanner. In ex vivo porcine mandibles, pigmentation of the enamel was well-estimated within 0.1 mm error. The pocket depth measured in a healthy human subject was also in good agreement with our prior study. This report demonstrates that a modality-independent registration technique can be applied to clinically relevant PA-US scans of the periodontium to reduce operator burden of skill and subject discomfort while showing potential for handheld clinical periodontal imaging.

Ultrasound is one of the most widely accessible imaging modalities but has yet to be adopted in clinical dentistry. Its utility for real-time analysis of soft and hard tissue interfaces can be augmented with optical excitation for photoacoustic ultrasound. Optical excitation enables contrast based on the characteristic absorption properties of tissue. This diagnostic technique is currently being investigated for a number of potential oral applications: detection of caries, determination of pulp vitality, measurement of periodontal pockets, and monitoring implant status. This chapter introduces the imaging modality for a dental readership while reviewing the progress to date and discussing the future development of this field.

The deposition of amyloid β (Aβ) plaques and fibrils in the brain parenchyma is a hallmark of Alzheimer’s disease (AD), but a mechanistic understanding of the role Aβ plays in AD has remained unclear. One important reason could be the limitations of current tools to size and count Aβ fibrils in real time. Conventional techniques from molecular biology largely use ensemble averaging; some microscopy analyses have been reported but suffer from low throughput. Nanoparticle tracking analysis is an alternative approach developed in the past decade for sizing and counting particles according to their Brownian motion; however, it is limited in sensitivity to polydisperse solutions because it uses only one laser. More recently, multispectral nanoparticle tracking analysis (MNTA) was introduced to address this limitation; it uses three visible wavelengths to quantitate heterogeneous particle distributions. Here, we used MNTA as a label-free technique to characterize the in vitro kinetics of Aβ(1–42) aggregation by measuring the size distributions of aggregates during self-assembly. Our results show that this technology can monitor the aggregation of 10(6)–10(8) particles/mL with a temporal resolution between 15 and 30 min. We corroborated this method with the fluorescent Thioflavin-T assay and transmission electron microscopy (TEM), showing good agreement between the techniques (Pearson’s r = 0.821, P < 0.0001). We also used fluorescent gating to examine the effect of ThT on the aggregate size distribution. Finally, the biological relevance was demonstrated via fibril modulation in the presence of a polyphenolic Aβ disruptor. In summary, this approach measures Aβ assembly similar to ensemble-type measurements but with per-fibril resolution.

Photoacoustic imaging is a rapidly maturing imaging modality in biological research and medicine. This modality uses the photoacoustic effect (“light in, sound out”) to combine the contrast and specificity of optical imaging with the high temporal resolution of ultrasound. The primary goal of image-guided therapy, and theranostics in general, is to transition from conventional medicine to precision strategies that combine diagnosis with therapy. Photoacoustic imaging is well-suited for noninvasive guidance of many therapies and applications currently being pursued in three broad areas. These include the image-guided resection of diseased tissue, monitoring of disease states, and drug delivery. In this review, we examine the progress and strategies for development of photoacoustics in these three key areas with an emphasis on the value photoacoustics has for image-guided therapy.

Light-emitting diode-based photoacoustic imaging is more compact and affordable than laser-based systems, but it has low power and hence a high number of replicates. Here, we describe double-stage delay-multiply-and-sum (DS-DMAS) to improve image quality collected on a LED-based scanner. DS-DMAS was evaluated experimentally using point targets (in different laterals and depths) as well as a hair and a rabbit eye. This algorithm can compensate for the low SNR of LED-based systems and offer better lateral resolution of about 60%, 25%, higher contrast ratio of about 97%, 34%, and better full-width-half-maximum of about 60%, 25%, versus delay-and-sum) and delay-multiply-and-sum, respectively. More importantly, DS-DMAS offers this using a smaller number of frames (only 2% of all the frames). These results indicate that DS-DMAS might be a valuable tool in the translation of LED-based and other low power PAI systems. Keywords: Photoacoustic imaging, Linear-array tomography, LED-based systems, Contrast improvement, SNR enhancement

Follicular unit extraction (FUE) and follicular unit transplantation (FUT) account for 99% of hair transplant procedures. In both cases, it is important for clinicians to characterize follicle density for treatment planning and evaluation. The existing gold-standard is photographic examination. However, this approach is insensitive to subdermal hair and cannot identify follicle orientation. Here, we introduce a fast and non-invasive imaging technique to measure follicle density and angles across regions of varying density. We first showed that hair is a significant source of photoacoustic signal. We then selected regions of low, medium, and high follicle density and showed that photoacoustic imaging can measure the density of follicles even when they are not visible by eye. We performed handheld imaging by sweeping the transducer across the imaging area to generate 3D images via maximum intensity projection. Background signal from the dermis was removed using a skin tracing method. Measurement of follicle density using photoacoustic imaging was highly correlated with photographic determination (R2 = 0.96). Finally, we measured subdermal follicular angles—a key parameter influencing transection rates in FUE.

Photoacoustic imaging (PAI) is an emerging medical imaging modality which provides the resolution of ultra- sound imaging and contrast of optical imaging. Usually, in conventional PAI systems, high energy Nd:YAG lasers are used for illumination, but they are bulky and expensive. To address these problems, pulse laser diodes and light emitting diodes (LEDs) have been used in PAI imaging systems. LEDs have a lower energy, compared to Nd:YAG lasers. As a result, a lower signal-to-noise (SNR) is achieved. To address this problem, photoacoustic signal averaging is used necessitating a high number of LEDs illuminations. This method is not suitable for applications which the imaging sample is not motionless. In this paper, we propose to use an advanced image reconstruction method, known as double-stage delay multiply and sum (DS-DMAS), to address the low SNR of the data collected from an LED-based scanner. DS-DMAS addresses the low SNR inherent to the LED-based excitation. The results show that this algorithm compensates the low SNR of LED-based systems and provides a lateral resolution of about 60 %, 25 %, higher contrast ratio of about 97 %, 34 %, and better full-width-half- maximum of about 60 %, 25 %, in comparison with the delay-and-sum and delay-multiply-and-sum, respectively. Additionally, only 2 % of all the frames are used in DS-DMAS, which indicates that DS-DMAS uses a smaller number of frames to provide a high image quality.

The etiology of peri-implant crestal bone loss is today better understood and certain factors proposed in the past have turned out to not be of concern. Regardless, the incidence of crestal bone loss remains higher than necessary and this paper reviews current theory on the etiology with a special emphasis on traditional and innovative methods to assess the level of crestal bone around dental implants that will enable greater sensitivity and specificity and significantly reduce variability in bone loss measurement.

The gold-standard periodontal probe is an aging tool that can detect periodontitis and monitor gingival health but is highly error-prone, does not fully characterize the periodontal pocket, and causes pain. Photoacoustic imaging is a noninvasive technique that can address these limitations. Here, a range of ultrasound frequencies between 16–40 MHz were used to image the periodontium and a contrast medium based on cuttlefish ink was used to label the pockets. A 40 MHz ultrasound frequency could spatially resolve the periodontal anatomy, including tooth, gum, gingival margin, and gingival thickness of tooth numbers 7–10 and 22–27. The photoacoustic-ultrasound measurements were more precise (0.01 mm) than those taken with physical probes by a dental hygienist. Furthermore, the full geometry of the pockets could be visualized with relative standard deviations of 10% (n = 5). This study shows the potential for non-invasive monitoring of periodontal health with photoacoustic-ultrasound imaging in the dental clinic. Keywords: Photoacoustic imaging, Periodontal disease, Diagnosis, Gingival thickness, Pocket depth, Periodontal charting, Melanin nanoparticles

The interaction between methylene blue (MB) and sodium dodecyl sulfate (SDS) has been widely studied spectroscopically, but details about their interactions remain unclear. Here, we combined photoacoustic (PA) imaging with nanoparticle tracking analysis (NTA) and spectroscopy to further elucidate this interaction. PA imaging of 0.05 mM MB showed a 492-fold increase in intensity upon the addition of 3.47 mM SDS. Higher concentrations above SDS’s critical micelle concentration (CMC) at 8.67 mM decreased the PA intensity by 54 times. Relative quantum yield measurements indicated that PA intensity increased as a result of fluorescence quenching. Meanwhile, NTA indicated an increased number of nonmicellar MB/SDS clusters at SDS concentrations below the CMC varying in size from 80 to 400 nm as well as a decreased number above the CMC. This trend suggested that MB/SDS clusters are responsible for the PA intensity enhancement. Comparison of PA intensities and spectral shifts with MB/hexadecyltrimethylammonium bromide, MB/sodium octyl sulfate, and MB/sodium chloride demonstrated that MB was bound to the sulfate moiety of SDS before and after micellization. Our observations suggest that MB forms aggregates with SDS at premicellar concentrations, and the MB aggregates disassociate as monomers that are bound to the sulfate moiety of SDS at micellar concentrations. These findings further clarify the process by which MB and SDS interact and demonstrate the potential for developing MB-/SDS-based contrast agents.

The aggregation of amyloid proteins is associated with a myriad of medical conditions including Alzheimer's disease (AD), diabetes, and Parkinson's disease. While attributable to different amyloid proteins, these proteins all share a common feature: a periodic glycine motif (GxxxG). This glycine motif, associated with increased backbone flexibility, is extended in a number of familial mutations that significantly increase severity of AD. A better understanding of the role that chain flexibility plays in protein aggregation will allow for new and innovative protein engineering strategies for nanotech development as well as give insight into therapeutic strategies.In this study, the glycine motif is targeted via either extension, by introduction of additional periodic glycine, or contraction, by replacement of glycine with a bulky or constrained amino acid. Modifications that extend periodic glycine include those that align with familial AD mutations. To examine how these alterations to the glycine repeat motif impact aggregation kinetics, aggregation was monitored via thioflavin-T fluorescence and fit using a novel kinetic equation that accounts for unique features observed at late stages of aggregation. Aggregation products were visualized using transmission electron microscopy to examine morphological features. In addition, aggregates were fractionated by size exclusion chromatography for size analysis via light scattering and morphology analysis via surface hydrophobicity. Results indicate that increased chain flexibility correlates with faster nucleation as well as a larger quantity of small, intermediate aggregates that exhibit reduced fibril morphology with unchanged surface hydrophobicity. Taken together with observations that smaller aggregates are more physiologically active, these results support the hypothesis that increases in protein chain flexibility, including that associated with familial mutations, may contribute to disease progression.Future work will extend studies to other amyloid proteins, such as amylin and chaplin H.