Search

From urban green space to pristine forest, Collembola is one of the most numerous and species-rich members of the soil fauna around the world. However, due to lack of taxonomic expertise and research, its diversity is poorly understood, especially in tropical and subtropical regions. Collembola biodiversity studies in Taiwan have not seen much progress since 1981, when Hsin Chi reviewed 26 species belonging to 20 genera and eight families. Additionally, reports of new records in Taiwan in the last 40 years are scattered amongst several publications and not easily accessible to most end-users. Thus, a concise summary of related research is urgently needed. In this study, we updated the checklist of Collembola in Taiwan, based on published papers as well as images recorded in 2020–2022. We concluded that 58 species of Collembola belonging to 31 genera and 12 families have been reported in Taiwan, including 13 newly-recorded species. This species richness marks a 123% increase from the 1981 review. The results have been made publicly available in the Catalog of Life in Taiwan database and the images recorded have been used to update species information in collembola.org. We also characterised morphological and genetic variations in the globular springtail species Papirioides jacobsoni Folsom, 1924 using DNA barcodes and highlighted potential research directions.

The non-volant terrestrial fauna of the Ryukyu Archipelago is characterized by high endemism with island groups forming distinct biogeographical regions separated by straits. This endemism has resulted from complex histories of insularization caused by geological events and dispersal through land bridges or across the sea during a timeframe of several million years. However, little is known about the zoogeography of terrestrial invertebrates in this region. We presented the first study looking into the earthworm fauna between Taiwan and the Ryukyu Archipelago under a phylogeographical context, and investigated the systematics and phylogeography of the giant earthworms in the Metaphire formosae species group endemic to this region. We highlighted strong evidence supporting that giant earthworms collected from Yonagunijima, the westernmost island of the Ryukyus, represent a new member of the species group, and further described it as a new species, Metaphire dunan sp. nov. Phylogenetic analyses and divergence time estimation rejected the hypothesis that the separation between M. dunan and its Taiwanese sister species, M. formosae, took place 8 Ma in late Miocene, when Taiwan and the Ryukyu region were supposedly first separated from each other and from the Eurasian continent. Instead, our results suggested that the speciation within the M. formosae species group occurred during the arc-continent collision in Taiwan after 5 Ma and M. dunan diverged from its sister species soon after the diversification of the species group had started. In Taiwan, the divergence of mountain-dwelling species followed a north-to-south pattern, consistent with the southward-propagating arc-continent collision on the island.

The invasion of jumping worms, a small group of pheretimoid earthworm species from Asia, has increasingly become an ecological, environmental and conservation issue in forest ecosystems and urban-suburban landscapes around the world. Their presence is often noticed due to their high abundance, distinctive “jumping” behavior, and prominent granular casts on the soil surface. Although they are known to affect soil carbon dynamics and nutrient availability, no single paper has summarized their profound impacts on soil biodiversity, plant community, and animals of all trophic groups that rely on soil and the leaf litter layer for habitat, food, and shelter. In this study, we summarize the biology, invasion, and ecological impacts of invasive jumping worms across North America. We highlight potential impacts of this second wave of earthworm invasion, contrast them with the preceding European earthworm invasion in temperate forests in North America, and identify annual life cycle, reproductive and cocoon survival strategies, casting behavior and co-invasion dynamics as the key factors that contribute to their successful invasion and distinct ecological impacts. We then suggest potential management and control strategies for practitioners and policy makers, underscore the importance of coordinated community science projects in tracking the spread, and identify knowledge gaps that need to be addressed to understand and control the invasion.

Background: A multistage approach to diagnose lateral retropharyngeal nodes (LRPNs) of nasopharyngeal carcinoma (NPC) had been proposed and warranted for validation. Methods: From 2012 to 2017, we collected NPC cases with LRPNs before radiotherapy-based treatments. The responsive nodes or those that progressed during follow-up were positive. The proposed criteria for the multistage approach delimited LRPNs with a minimal axial diameter (MIAD) ≥ 6.1 mm were positive and if the mean standard uptake value ≥ 2.6, or if the maximal coronal diameter ≥ 25 mm and maximal axial diameter ≥ 8 mm with nodes MIAD < 6.1 mm were also positive. The outcomes were compared with the MIAD cutoff value ≥ 6 mm (traditional method). Chi-squared test was used to compare two areas under the curve (AUC) of receiver operating characteristic curves. Results: A total of 67 eligible NPC cases and 155 LRPNs (72 positive and 83 negative) were analyzed. The accuracy, specificity, and sensitivity of the traditional method were 0.91, 0.93, and 0.89, respectively. The values for the multistage approach all reached 0.94. The AUC was significantly greater for the multistage approach compared with that for the traditional method (p = 0.023). Conclusion: The results of LRPN data in this cohort of patients support the advantage of the multistage approach.

Controlling the corrosion rate of implants to maintain mechanical properties during tissue healing is significant in developing magnesium alloy implants. In addition to surface treatment and material properties, the study of geometric alteration and mechanical strength are also vital for implant development. In this study, we developed a three-dimensional model for semi-autonomous computational pitting corrosion. It is based on the Monte Carlo method, modeling magnesium alloy implants toward clinical application. The corrosion probability is based on the number of exposed surfaces to saline and the oxidation characteristics of the elements. The computational results are well compared with the experimental measurement using micro-computed tomography (micro-CT) in 500 h. Subsequently, the computational analysis is extended to 3,000 h of corrosion analysis. The 3D model appears promising to assist the development of biodegradable implants.

During litter decomposition, three major fates of litter carbon (C) are possible: emission as carbon dioxide (CO2) into the atmosphere, leaching of dissolved organic carbon (DOC), and translocation and transformation into soil organic carbon (SOC). Soil moisture, one of the key drivers of litter decomposition, is predicted to change in the future due to shifts in precipitation patterns. We explored the effects of low, medium and high rainfall intensities on the partitioning of litter carbon fates in a 6-month long laboratory experiment. We tracked carbon in 13C-labeled tulip poplar litter in a laboratory mesocosms by measuring respiration rates, dissolved organic carbon in the leachate, and soil organic carbon at the end of the experiment. Mesocosms with the same three rainfall intensities but without leaf litter were also set up. Leaching of labile carbon caused priming, but the effect was stronger in the low intensity treatment. Transport of litter-derived carbon also differed: in high intensity treatment there was more total carbon in the surface soil and more litter-derived carbon in in the deep soil layers. The cumulative CO2 efflux was not significantly different. Our results highlight that extreme rainfall events, as projected by most climate models, may lead to altered carbon cycling in temperate forest soils.

Background and objectives: Vertebral compression fracture is a major health care problem worldwide due to its direct and indirect negative influence on health-related quality of life and increased health care costs. Although a percutaneous surgical intervention with balloon kyphoplasty or metal expansion, the SpineJack, along with bone cement augmentation has been shown to efficiently restore and fix the lost vertebral height, 21–30% vertebral body height loss has been reported in the literature. Furthermore, the effect of the augmentation approaches and the loss of body height on the biomechanical responses in physiological activities remains unclear. Hence, this study aimed to compare the mechanical behavior of the fractured lumbar spine with different restored body heights, augmentation approaches, and posterior fixation after kyphoplasty using the finite element method. Furthermore, different augmentation approaches with bone cement and bone cement along with the SpineJack were also considered in the simulation. Materials and Methods: A numerical lumbar model with an incomplete burst fracture at L3 was used in this study. Two different degrees of restored body height, namely complete and incomplete restorations, after kyphoplasty were investigated. Furthermore, two different augmentation approaches of the fractured vertebral body with bone cement and SpineJack along with bone cement were considered. A posterior instrument (PI) was also used in this study. Physiological loadings with 400 N + 10 Nm in four directions, namely flexion, extension, lateral bending, and axial rotation, were applied to the lumbar spine with different augmentation approaches for comparison. Results: The results indicated that both the bone cement and bone cement along with the SpineJack could support the fractured vertebral body to react similarly with an intact lumbar spine under identical loadings. When the fractured body height was incompletely restored, the peak stress in the L2–L3 disk above the fractured vertebral body increased by 154% (from 0.93 to 2.37 MPa) and 116% (from 0.18 to 0.39 MPa), respectively, in the annular ground substance and nucleus when compared with the intact one. The use of the PI could reduce the range of motion and facet joint force at the implanted levels but increase the facet joint force at the upper level of the PI. Conclusions: In the present study, complete restoration of the body height, as possible in kyphoplasty, is suggested for the management of lumbar vertebral fractures.

Posttranscriptional modifications in RNA have been considered to contribute to disease pathogenesis and tumor progression. NOL1/NOP2/Sun domain family member 2 (NSUN2) is an RNA methyltransferase that promotes tumor progression in several cancers. Pancreatic cancer relapse inevitably occurs even in cases where primary tumors have been successfully treated. Associations of cancer progression due to reprogramming of the cancer methyl-metabolome and the cancer genome have been noted, but the effect of base modifications, namely 5-methylcytosine (m

Posterior lumbar interbody fusion (PLIF) with a spacer and posterior instrument (PI) via minimally invasive surgery (MIS) restores intervertebral height in degenerated disks. To align with MIS, the spacer has to be shaped with a slim geometry. However, the thin spacer increases the subsidence and migration after PLIF. This study aimed to propose a new lumbar fusion approach using bone cement to achieve a larger supporting area than that achieved by the currently used poly aryl-ether-ether-ketone (PEEK) spacer and assess the feasibility of this approach using a sawbone model. Furthermore, the mechanical responses, including the range of motion (ROM) and bone stress with the bone cement spacer were compared to those noted with the PEEK spacer by finite element (FE) simulation. An FE lumbar L3-L4 model with PEEK and bone cement spacers and PI was developed. Four fixing conditions were considered: intact lumbar L3-L4 segment, lumbar L3-L4 segment with PI, PEEK spacer plus PI, and bone cement spacer plus PI. Four kinds of 10-NM moments (flexion, extension, lateral bending, and rotation) and two different bone qualities (normal and osteoporotic) were considered. The bone cement spacer yielded smaller ROMs in extension and rotation than the PEEK spacer, while the ROMs of the bone cement spacer in flexion and lateral bending were slightly greater than with the PEEK spacer. Compared with the PEEK spacer, peak contact pressure on the superior surface of L4 with the bone cement spacer in rotation decreased by 74% (from 8.68 to 2.25 MPa) and 69.1% (from 9.1 to 2.82 MPa), respectively, in the normal and osteoporotic bone. Use of bone cement as a spacer with PI is a potential approach to decrease the bone stress in lumbar fusion and warrants further research.

Tibial tubercle osteotomy (TTO) is commonly performed in cases of complicated juxta-articular trauma or revision total knee arthroplasty. However, strategies for firmly fixing the resulting osteotomy bone fragment are not sufficiently understood. This study aims to investigate the effect of the location of the gap between the fragment and the tibia and with various fixed screw configurations on TTO stability, contact force on the fragment, and bone stress by using the finite element method. A TTO model with a 1-mm gap, either above or below the fragment, was developed. Furthermore, five screw configurations, including two parallel horizontal screws placed at 20- and 30-mm intervals, two parallel downward screws, two trapezoid screws, and two divergent screws, were used. A vertically upward 1600-N force was applied on the tibial tubercle to mimic a worst-case condition. Placing the fragment close to the superior cutting plane (above the gap) yielded greater stability and less stress on the bone than did placing it close to the inferior cutting plane. The superior cutting plane of the tibia generated the largest contact force on the superior plane of the fragment for static balance under loading. Additionally, among all screw configurations, the configuration involving two parallel downward screws resulted in the highest stability but also the greatest stress on the cortical bone. The fragment obtains a solid barrier and support from the tibia immediately after surgery to against the patellar tension force when the fragment is close to the superior cutting plane of the tibia.

Background Although use of a dynamic hip screw (DHS) for stable intertrochanteric hip fracture fixation has been successfully applied in fracture healing for more than 20 years, DHS fixation on unstable intertrochanteric fractures still has a high failure rate, especially in patients with osteoporosis. Although the wire fixation is usually incorporated with orthopedic device to treat fracture, the wiring techniques are developed through experiences. Thus, this study is objective to investigate the biomechanical property of different wire fixation methods incorporated with DHS system to provide the lesser trochanter fragment stable fixation on osteoporotic TypeA2.1 fracture for enhancing stability after bone reduction. Results Sawbone testing results demonstrated higher maximum load, stiffness, and energy in a DHS with wire fixation compared with DHS fixation only. In static biomechanical testing of a cadaver femur, we compared the stiffness of five fixation models and then tested a fatigue failure model in cycle loading with DHS fixation only. Wiring fixation can enhance stability and the cut-out failure model in the fatigue test was identical to the clinical failure model. Conclusions Lesser trochanteric fragment fixation is a crucial concern in the stability of an A2.1 unstable fracture, and the combination of a wiring technique with a DHS seems beneficial for achieving better stability. The addition of an antirotational greater trochanter is likely to enhance stability through wiring of the greater trochanter.

Background To maintain the corrected alignment after high tibial osteotomy (HTO), fixation with titanium locking plate and screws is widely used in current practice; however, screw breakage is a common complication. Thus, this study was to investigate the mechanical stability of HTO with locking plate and various screw fixations, including the length as well as the type. Methods A finite element (FE) model involving a distal femur, meniscus, and a proximal tibia with HTO fixed with a titanium locking plate and screws was created. The angle of the medial open wedge was 12°, and bone graft was not used. Two types of screws, namely conventional locking and far-cortical locking screws, with various lengths and configurations were used. At the proximal tibia, conventional locking screws with different lengths, 30 and 55 mm, were used; at the tibia shaft, different screw fixations including one-cortical, two-cortical, and far-cortical locking screws were used. Results The use of far-cortical locking screw generated the highest equivalent stress on the screws, which was four times (from 137.3 to 541 MPa) higher than that of the one-cortical screw. Also, it led to the maximum deformation of the tibia and a greater gap deformation at the osteotomy site, which was twice (from 0.222 to 0.442 mm) larger than that of the one-cortical screw. The effect of different locking screw length on tibia deformation and implant stress was minor. Conclusion Thus, far-cortical locking screws and plates increase interfragmentary movement but the screw stress is relatively high. Increasing the protection time (partial weight duration) is suggested to decrease the risk of screw breakage in HTO through fixation with titanium far-cortical locking screws and plates.

Acrylamide (ACR), which is formed during the Maillard reaction, is used in various industrial processes. ACR accumulation in humans and laboratory animals results in genotoxicity, carcinogenicity, neurotoxicity, and reproductive toxicity. In this study, we investigated the mechanisms by which ACR may induce vasorelaxation and neuromuscular toxicity. Vasorelaxation was studied using an isolated rat aortic ring model. The aortic rings were divided into the following groups: with or without endothelium, with nitric oxide synthase (NOS) inhibition, with acetylcholine receptor inhibition, and with extracellular calcium inhibition. Changes in tension were used to indicate vasorelaxation. Neuromuscular toxicity was assessed using a phrenic nerve–diaphragm model. Changes in muscle contraction stimulated by the phrenic nerve were used to indicate neuromuscular toxicity. ACR induced the vasorelaxation of phenylephrine-precontracted aortic rings, which could be significantly attenuated by NOS inhibitors. The results of the phrenic nerve–diaphragm experiments revealed that ACR reduced muscle stimulation and contraction through nicotinic acetylcholine receptor (AChR). ACR-induced vasotoxicity was regulated by NOS through the aortic endothelium. Nicotinic AChR regulated ACR-induced neuromuscular blockage.

Statement of problem The press-fit (Morse taper) implant system is commonly used to restore edentulous areas. However, abutment screws in this system may be damaged because of the 2- or 3-piece design, consequently causing complications. How these damaging situations occur is unclear. Purpose The purpose of this in vitro and finite element analysis (FEA) study was to elucidate the mechanisms of the press-fit implant system underlying abutment screw damage. Material and methods The ANKYLOS implant system was used as a simulation model and for experimental test specimens. The experimental test was performed by using a material test system, and the obtained data were used to validate the FEA outcome. In the FEA simulation, the bilinear material property and nonlinear contact conditions were applied to simulate the process of tightening the abutment screw between the abutment and implant. A force of 300 N was then applied to the abutment to investigate the stress distribution and deformation of the implant system. Results In the experimental test, the fracture site of all specimens was observed at the abutment-screw thread. All implants and abutments exhibited permanent bending deformation. The results of the FEA simulation generally concurred with the experimental outcomes. Conclusions The abutment torque used to generate the press-fit contact interface between the abutment and implant induced stresses within the implant components, substantially increasing the failure probability of the conical implant system during function.

Background Two parallel cannulated screws along with an anterior wire to construct a tension band is a popular approach in transverse patellar fractures. However, the optimal screw proximity, either deep or superficial screw placements, remains controversial. Hence, a new concept of the addition of a third screw to form a triangular configuration along with the original two parallel screws was proposed in this study. Therefore, the biomechanical effect of the additional third screw on the stability of the fractured patella was investigated with finite element (FE) simulation. Methods An FE knee model including the distal femur, proximal tibia, and fractured patella (type AT/OTA 34-C) was developed in this study. Four different screw configurations, including two parallel cannulated screws with superficial (5-mm proximity) and deep (10-mm proximity) placements and two parallel superficial screws plus a third deep screw, and two parallel deep screws plus a third superficial screw, with or without the anterior wire, were considered for the simulation. Results Results indicated that the addition of a third screw increased stability by reducing the dorsal gap opening when two parallel screws were deeply placed, particularly on the fractured patella without an anterior wire. However, the third screw was of little value when two parallel screws were superficially placed. In the existence of two deep parallel screws and the anterior wire, the third screw reduced the gap opening by 23.5% (from 1.15 mm to 0.88 mm) and 53.6% (from 1.21 mm to 0.61 mm) in knee flexion 45° and full extension, respectively. Furthermore, in the absence of the anterior wire, the third screw reduced the gap opening by 73.5% (from 2 mm to 0.53 mm) and 72.2% (from 1.33 mm to 0.37 mm) in knee flexion 45° and full extension, respectively. Conclusion Based on the results, a third cannulated screw superficially placed (5-mm proximity) is recommended to increase stability and maintain contact of the fractured patella, fixed with two parallel cannulated screws deeply placed (10-mm proximity), particularly when an anterior wire was not used. Furthermore, the third screw deeply placed is not recommended in a fractured patella with two parallel superficial screws.

Background Lateral hinge fracture (LHF) is associated with nonunion and plate breakage in high tibial osteotomy (HTO). Mechanical studies investigating fixation strategies for LHFs to restore stability and avoid plate breakage are absent. This study used computer simulation to compare mechanical stabilities in HTO for different LHFs fixed with medial and bilateral locking plates. Methods A finite element knee model was created with HTO and three types of LHF, namely T1, T2, and T3 fractures, based on the Takeuchi classification. Either medial plating or bilateral plating was used to fix the HTO with LHFs. Furthermore, the significance of the locking screw at the combi hole (D-hole) of the medial TomoFix plate was evaluated. Results The osteotomy gap shortening distance increased from 0.53 to 0.76, 0.79, and 0.72 mm after T1, T2, and T3 LHFs, respectively, with medial plating only. Bilateral plating could efficiently restore stability and maintain the osteotomy gap. Furthermore, using the D-hole screw reduced the peak stress on the medial plate by 28.7% (from 495 to 353 MPa), 26.6% (from 470 to 345 MPa), and 32.6% (from 454 to 306 MPa) in T1, T2, and T3 LHFs, respectively. Conclusion Bilateral plating is a recommended strategy to restore HTO stability in LHFs. Furthermore, using a D-hole locking screw is strongly recommended to reduce the stress on the medial plate for lowering plate breakage risk.

Background It is technical demanding to execute primary total knee arthroplasty (TKA) for post-traumatic knee arthritis with periarticular implants. Our purpose is to present a simple extramedullary guide technique and report the clinical results of our series of primary TKAs in patients with post-traumatic arthritis without hardware removal. Methods Between April 2014 and March 2019, a series of seven patients with post-traumatic knee arthritis and retained hardware were included. All the surgeries were performed by the same surgeon. The mean age of the patients was 67 years. All the index procedures were performed with primary TKAs by the same surgeon according to simple extramedullary technique. The parallelism between the distal femoral and proximal tibial cuts as well as the required limb alignments were verified intra-operatively. Radiographic measurements and clinical outcomes were reviewed retrospectively. Results Overall, there was a good restoration of postoperative mechanical alignment in all cases. The mean post-operative Hip-Knee-Ankle (HKA) angle was 179.4°. No patient required allogenic blood transfusion or prolonged hospital stays. No surgical site-specific complications were noted by chart review. In the last follow-up, no implant failure was found. Clinical assessments according to knee society score showed good knee scores (89.1), functional scores (87.9) and motion arc (112.9). Conclusions Our results show that post-traumatic knee arthritis can be safely managed with this extramedullary method without hardware removal.

With the development of technology, a new kind of Distributed Denial-of-Service (DDoS) attack named link-flooding attack (LFA) has been widely applied to congest critical network links and to paralyze the network service. This is mainly due to LFA is easily implemented, obfuscated, and occulted by launching large-scale legitimate low-speed flows to paralyze target network areas. Many solutions are proposed to detect LFA, they are designed by hand-crafted algorithms and hardly keep up the developing progress of self-organizing network structures and emerging network protocols. This study proposes a Deep-Learning based LFA defense framework, called DCN (Deep Convolution Network), that applies Convolution Neural Networks to statistically monitoring the network status through end-to-end functionality (Input: network status snapshot; Output: LFA attack or not attack) without any manual intervention. The experiment results demonstrate DCN can accurately detect DCN in varying network structure and flow patterns. Furthermore, DCN also provides quantitative security risk analysis by using learning time as the control variable, network structure as the independent variable, and time to identify LFA as the dependent variable. The contributions of DCN are (1) providing an autonomic LFA defense framework without any manual intervention, (2) providing objective and quantitative analytical security risk evaluating indicator, and (3) allowing cloud computing and Internet of Things company focuses on their service and leaves security defending to DCN.

Regardless of how soil is defined, soils are the most diverse of all ecosystems. It is estimated that 25–30% of all species on Earth live in soils for all or part of their lives (Decaens et al. 2006). A single gram of soil is estimated to contain 1 × 109 microorganisms, roughly the same population size as the number of humans in Africa (Microbiology by Numbers 2011). That same gram of soil likely contains 4000 species. They are only one part of a larger food web, however, that includes roundworms (phylum Nematoda), springtails (order Collembola), and other fauna (Fig. 5.1). The soil fauna has equally astounding numbers (e.g., 40,000 springtails in 1 m2). Soil organisms, ranging from microbes to moles (family Talpidae), promote crop growth and livestock production (Barrios 2007; Kibblewhite et al. 2008), produce antibiotics (Wall et al. 2015), control nutrient loads in surface soils and groundwater (De Vries et al. 2011), and regulate greenhouse gas emissions (Singh et al. 2010).

Acrylamide (ACR) is present in high-temperature-processed high-carbohydrate foods, cigarette smoke, and industrial pollution. Chronic exposure to ACR may induce neurotoxicity from reactive oxygen species (ROS); however, the mechanisms underlying ACR-induced neurotoxicity remain unclear. We studied 28-day subacute ACR toxicity by repeatedly feeding ACR (0, 15, or 30 mg/kg) to rats. We conducted RNA sequencing and Western blot analyses to identify differences in mRNA expression in the blood and in protein expression in the brain tissues, respectively, of the rats. AQP4 transient transfection was performed to identify potential associations with protein regulation. The rats treated with 30 mg/kg ACR exhibited hind-limb muscle weakness. Matrix metalloproteinase (MMP9) expression was higher in the ACR-treated group than in the control group. ACR induced MMP-9 and AQP4 protein expression in the brain tissues of the rats, which subsequently presented with neurotoxicity. In the in vitro study, Neuro-2a cells were transiently transfected with AQP4, which inhibited MMP-9 and TNF receptor-associated factor 6 (TRAF6) expression, and inhibited ACR induced expression of TRAF6, IκBα, and nuclear factor κB (NFκB). Using a combination of in vivo and in vitro experiments, this study revealed that depressive symptoms associated with ACR-induced neurotoxicity are associated with downregulation of AQP4 and induction of the TRAF6 pathway.

Forests are major sources of terrestrial CH4 and CO2 fluxes but not all surfaces within forests have been measured and accounted for. Stem respiration is a well-known source of CO2, but more recently tree stems have been shown to be sources of CH4 in wetlands and upland habitats. A study transect was established along a natural moisture gradient, with one end anchored in a forested wetland, the other in an upland forest and a transitional zone at the midpoint. Stem and soil fluxes of CH4 and CO2 were measured using static chambers during the 2013 and 2014 growing seasons, from May to October. Mean stem CH4 emissions were 68.8 ± 13.0 (mean ± standard error), 180.7 ± 55.2 and 567.9 ± 174.5 µg m−2 h−1 for the upland, transitional and wetland habitats, respectively. Mean soil methane fluxes in the upland, transitional and wetland were − 64.8 ± 6.2, 7.4 ± 25.0 and 190.0 ± 123.0 µg m−2 h−1, respectively. Measureable CH4 fluxes from tree stems were not always observed, but every individual tree in our experiment released measureable CH4 flux at some point during the study period. These results indicate that tree stems represent overlooked sources of CH4 in forested habitats and warrant investigation to further refine CH4 budgets and inventories.

Some Asian megascolecid earthworms, e.g. Amynthas agrestis and Amynthas tokioensis, are highly invasive and have only recently been reported from natural ecosystems in the northeastern USA. There, they are annual earthworms that survive the winter as cocoons (an egg in a tough covering). Hatching occurs in mid-April when temperatures rise consistently above 10 °C. In some years, winter temperatures also reach 10 °C during short warming episodes, but hatchlings then are likely to die when temperatures drop again. To test this hypothesis, soil was collected on 7 sampling dates during January–May 2016 at one site in the Champlain Valley, Vermont and extracted for the cocoons. Both hatched and unhatched cocoons were enumerated and identified to species by both size and sequencing of the mitochondrial cytochrome c oxidase I gene (COI). A regression model on the number of unhatched cocoons over time predicted that ~ a quarter (A. agrestis) and ~ a third (A. tokioensis) would hatch before mid-May; no hatchlings were observed. Thus, hatching during warming periods in winter seemingly resulted in high mortality. Such winter hatching, and loss, may increase with climate warming in the region because winter warming periods should become more common. Climate warming could therefore reduce ability of the invasive earthworms to persist in northern habitats. Conversely, rapid hatching when the soil warms in spring could have an ecological benefit by allowing opportunities to expand at the thermal edge of the range as the climate continues to warm.

Introduction The purpose of this study was to delineate the anatomic relationship between the anterior articular capsule and the adjacent subscapularis by measuring the dimensions of the anterior articular capsule attachment and the subscapularis footprint on the humerus, as well as investigating the interface between the two structures. Materials and methods Three shoulder specimens underwent histological analysis; for histological analysis, cross-sections through the subscapularis-capsule complex were harvested at the tendinous and muscular insertion sites. The dimensions of the anterior articular capsule attachment and the subscapularis footprint (including the tendinous and muscular insertions) were measured in thirteen cadaveric shoulder specimens. Results Histologically, the articular capsule has thin and loosely arranged collagen fibers with many interspersing fibroblast nuclei, whereas the outer layer of the articular capsule blends into a layer of more loosely spaced and less organized collagen fibers. This interface between the subscapularis and the underlying articular capsule is filled with more loosely spaced and less organized collagen fibers. The macroscopic evaluation showed that the minimum articular capsule width (4.2 mm, SD 2.2 mm) was located at its initiation 4.9 mm (SD, 2.1 mm) inferior to the superior margin of the subscapularis; the corresponding subscapularis footprint width measured 10.1 mm (SD, 4.9 mm). The maximum articular capsule width was11.1 mm (SD, 3.7 mm) and was located 5 mm distal to the inferior margin of the tendinous footprint. The maximum subscapularis footprint width was 15.8 mm (SD, 2.9 mm); the corresponding articular capsule attachment measured 5.2 mm (SD, 1.8 mm). Conclusions Our results suggest that the anterior articular capsule attachment of the glenohumeral joint complements the footprint of the subscapularis and occupies a larger area of the lesser tubercle and metaphysis of the humerus than previously documented. The histological study confirms the presence of a demarcation between the subscapularis and articular capsule, specifically more significant at the region medial to the tendon insertion and at the muscular insertion of the subscapularis.

Earthworm species with different feeding, burrowing, and/or casting behaviors can lead to distinct microbial communities through complex direct and indirect processes. European earthworm invasion into temperate deciduous forests in North America has been shown to alter microbial biomass in the soil and reduce the fungi-to-bacteria ratios. It is unclear how changes in earthworm species composition due to interspecific competition may alter this dynamics, especially under the ongoing invasion by Asian Amynthas and Metaphire species. Furthermore, it is also poorly understood how interspecific interactions involving different species may have species-dependent, non-additive effects on different groups of soil microorganisms. By conducting a two-year field experiment in a deciduous forest in the Mid-Atlantic, we examined how the Asian species Amynthas agrestis and Amynthas corticis , the European species Lumbricus rubellus and Octolasion lacteum , and their interactions affect soil microbial communities, and tested the hypotheses that the Asian species and the interaction between the two European species negatively affect bacterial biomass. We showed that while A. corticis generally had no effect on soil microorganisms, A. agrestis had a positive effect on microbial biomass, primarily by increasing the biomass of Gram-positive and Gram-negative bacteria. Consistent with our hypothesis, the interaction between L. rubellus and O. lacteum had a negative effect on bacteria biomass. We concluded that the ongoing invasion of the Asian earthworm A. agrestis in forest soils and potential displacement of L. rubellus due to interspecific competition may lead to increased bacterial biomass through increasing resource availability and disrupting the interaction between L. rubellus and O. lacteum , potentially causing increased carbon mineralization and reducing soil carbon storage.

Earthworm invasions are one of the most serious causes of ecological deterioration in the temperate deciduous forests of North America. Non-native earthworms impact understory vegetation, leaf litter layer, carbon dynamics, nutrient availability, and the associated food webs. Here we report a significant status change and confirm expansion of known range of Amynthas agrestis, one of the most serious invasive species in North America, and two of its close relatives, A. tokioensis and Metaphire hilgendorfi. The three species have never been confirmed to co-occur in North American ecosystems. We examined 1760 earthworms collected from 30 sites across northeastern USA, and identified them using a new morphological key. Our data show that sympatric occurrence of at least two, and often all three, species is more common than having only one species. In addition, A. tokioensis was dominant in many of these earthworm communities. The status change in species composition from only one species to two or three and the shift in dominance are most likely caused by previous incorrect species identification. Our results support expansion of known range of A. tokioensis and M. hilgendorfi northward and westward into states with colder winters. This range expansion may have taken place alongside that of A. agrestis in the last 10–20 years, but has long been overlooked. Altogether, results highlight an urgent need for correct species identification. The recognition of an expanding multi-species system represents a unique opportunity to further evaluate complex interactions among co-invading and resident species, and to investigate whether interspecific interactions have unexpected non-additive impacts on ecological processes.

Background The study proposed a novel method for converting a radiographic guide into a surgical guide and evaluated its accuracy. Materials and Methods Radiographic guide was reformed with the addition of index rods for geometric conversion method (GCM). Planning implants were projected on geometric projection planes, and the implant positions were measured. The radiographic guide was converted into surgical guide using a generic bench drill machine with GCM data. Two experiments were designed to validate the GCM. (1) In vitro test: Twenty implants were placed on five edentulous dental models by using the GCM (group 1) and Stereolithography (SLA) method (group 2), respectively. The deviations of planned and placed implant were calculated, and the precision error (PE) value was calculated to evaluate the stability of the GCM and SLA. (2) In vivo test: Nine edentulous subjects were selected for clinical implant surgery with the GCM guide. Two level of the index rods of radiographic guides were prepared for surgical guides forming. The differences between the planned and actual implants were calculated in implant head, apex, and angulation. Results The in vitro test revealed no significant differences in the planned and placed angulations between groups 1 and 2 (P > .05). The PE was not significantly different between groups 1 and 2 (P > .05). The in vivo test revealed a successful treatment of the subjects, and 16 implant sites were evaluated. The results indicated that GCM guide could achieve the three-dimensional (3D) offset deviations of 1.03 ± 0.27 mm and 1.17 ± 0.24 mm at the implant head and apex, respectively, and 1.37° ± 0.21° for the 3D angulation. Conclusion The novel method for converting a radiographic guide into a surgical guide appears accurate and stable compared with SLA.

Prof. Pietro Omodeo (University of Siena, Italy), the world-renowned earthworm taxonomist and evolutionary biologist, was born in Cefalù, Sicily, Italy on the 27th September, 1919. He celebrates his 100th birthday in 2019 and members of the international community of earthworm taxonomists salute him with Petroscolex centenarius gen. et sp. nov., a new megadrile taxon discovered in 1991 by him but which has not been formally described until now. The many important contributions of Omodeo to oligochaetological research are briefly mentioned.

This study describes two new species of earthworms belonging to the genus Amynthas (Oligochaeta: Megascolecidae) from central Taiwan. They are named Amynthas luridus sp. nov. and Amynthas ruiyenensis sp. nov. Both species are octothecal with the former found at elevations of 1500–2300 m and the latter at an elevation of 2200 m from the Central Mountain Range. In addition, DNA barcodes are made available for the first time for the following species: Amynthas catenus Tsai et al., 2001, Amynthas exiguus aquilonius Tsai et al., 2001, Amynthas proasacceus Tsai et al., 2001, Amynthas hohuanmontis Tsai et al., 2002, Amynthas tessellatus Shen et al., 2002, Amynthas fenestrus Shen et al., 2003, Amynthas tantulus Shen et al., 2003, and Amynthas uvaglandularis Shen et al., 2003. Furthermore, Amynthas exiguus ssp. aquilonius Tsai et al., 2001 distributed at elevations of 2200–3000 m in the Central Mountain Range is elevated to species level, as A. aquilonius Tsai et al., 2001. The highest altitude record so far for the exotic Eukerria saltensis (Beddard, 1895) in Taiwan, 2200 m above sea level, is documented. Moreover, some recent assignments of species to Amynthas and Metaphire and synonymies of names are critically discussed. It is argued that idiosyncratic genus concepts, inadequate species comparisons, and unexplained synonymies should be avoided. A hitherto undetected and possibly monophyletic species group of mainly Korean Amynthas species in the A. tokioensis-group is indicated, characterized by numerous genital papillae around each spermathecal pore and male porophore, large ampullae, long diverticula, large prostate glands, and manicate intestinal caeca. The names A. bimaculata, A. silvatica and A. surcata (Ishizuka, 1999), as well as A. odaesanensis, A. righii, A. fasciiformis, and A. sanchongensis Hong & James, 2001, previously declared as junior synonyms of A. tappensis (Ohfuchi, 1935), are revalidated.

Background Cannulated screws with an anterior wire are currently used for managing transverse patellar fracture. However, the addition of anterior wiring with various types of screws via open surgery to increase the mechanical stability is yet to be determined. Hence, this study aimed to compare the mechanical behaviors of a fractured patella fixed with various screws types and at various screw locations with and without the anterior wire. The present study hypothesized that using the anterior wire reduces the fracture gap formation. Methods A finite element (FE) model containing a fractured patella fixed with various types of cannulated screws and anterior wiring was created in this study. Three types of screws, namely partial thread, full thread, and headless compression screws, and two screw depths, namely 5 and 10 mm away from the anterior surface of the patella, were included. The effect of the anterior wire was clarified by comparing the results of surgical fixation with and without the wire. Two magnitudes and two loading directions were used to simulate and examine the mechanical responses of the fractured patella with various fixation conditions during knee flexion/extension. Results Compared with partial thread and headless compression screws, the full thread screw increased the stability of the fractured patella by reducing fragment displacement, fracture gap formation, and contact pressure while increasing the contact area at the fracture site. Under 400-N in the direction 45°, the full thread screw with 5-mm placement reduced the gap formation by 86.7% (from 2.71 to 0.36 mm) and 55.6% (from 0. 81 to 0. 36 mm) compared with the partial thread screw with 10-mm placement, respectively without and with the anterior wire. Conclusion The anterior wire along with the full thread screw is preferentially recommended for maintaining the surgical fixation of the fractured patella. Without the use of anterior wiring, the full thread screw with 5-mm placement may be considered as a less invasive alternative; however, simple screw fixation at a deeper placement (10 mm) is least recommended for the fixation of transverse patellar fracture.

Introduction Elastic stable intramedullary nailing (ESIN) is a treatment strategy for the management of diaphyseal long-bone fractures in adolescents and children, but few studies have investigated the mechanical stability of tibial diaphyseal fractures treated with various degrees of prebending of the elastic nails. Therefore, the aim of this study was to compare the mechanical stability, including the gap deformation and nail dropping, of a tibia fracture with various fracture sites and fixed with various degrees of prebending of the elastic nails by the finite element method. Furthermore, the contribution of end caps to stability was taken into consideration in the simulation. Methods A tibia model was developed with a transverse fracture at the proximal, middle and distal parts of the diaphysis, and fixed with three degrees of prebending of elastic nails, including those equal to, two times and three times the diameter of the intramedullary canal. The outer diameter of the nail used in the computation was 3.5 mm, and the fractured tibia was fixed with two elastic double C-type nails. Furthermore, the proximal end of each nail was set to free or being tied to the surrounding bone by a constraint equation to simulate with or without using end caps. Results The results indicated that using end caps can prevent the fracture gap from collapsing by stopping the ends of the nails from dropping back in all prebending conditions and fracture patterns, and increasing the prebending of the nails to a degree three times the diameter of the canal reduced the gap shortening and the dropping distance of the nail end in those without using end caps under axial compression and bending. Insufficient prebending of the nails and not using end caps caused the gap to collapse and the nail to drop back at the entry point under loading. Conclusions Using end caps or increasing the prebending of the nails to three times the diameter of the canal is suggested to stop the nail from dropping back and thus produce a more stable structure, with less gap deformation, in the management of a simulated tibial diapyhseal fracture by using titanium elastic nails with a double C-shape.

Soil respiration is frequently measured as a surrogate for biological activities and is important in soil carbon cycling. The heterotrophic component of soil respiration is primarily driven by microbial decomposition of leaf litter and soil organic matter, and is partially controlled by resource availability. In North American temperate deciduous forests, invasive European and Asian earthworms are known to variously affect soil properties and resource availability through their feeding, burrowing, and casting behaviors, and may affect different components of soil respiration through modulating the microbial communities. By tracing litter-derived C from 13C and 15N double-enriched leaf litter into soil and CO2 efflux in a mesocosm experiment, we tested the hypothesis that earthworms inhibit litter C-derived soil respiration by reducing resource availability and microbial biomass, and further examined how species-specific effects of earthworms on soil respiration are mediated by soil microbial community. We showed that while earthworms generally had no effect on total soil respiration, the interaction between Octolasion lacteum and Lumbricus rubellus had a significant negative non-additive effect, presumably through affecting anaerobic microsites in the soil. Moreover, litter C-derived soil respiration was reduced by the Asian Amynthas hilgendorfi, the European L. rubellus, and the North American native species Eisenoides lonnbergi, but not by the European species O. lacteum. Phospholipid fatty acid (PLFA) analysis and structural equation modeling indicated that while soil bacteria and fungi abundances were affected by earthworm species identities, the observed reduction of litter C-derived soil respiration could not be fully explained by changes in microbial biomass. We attributed these effects to earthworm-induced aggregate formation, reduction of microbial transformation of labile carbon, and antimicrobial peptide activities, and concluded that the mechanisms through which the four earthworm species affect the fate of litter-derived C and its mineralization are species-specific.

This study describes four new species of earthworms belonging to the genus Amynthas (Megascolecidae: Oligochaeta) from southwestern Taiwan. They are Amynthas quadriorbis sp. nov., Amynthas douliouensis sp. nov., Amynthas tsou sp. nov. and Amynthas dinghuensis sp. nov. The former three species are sexthecate with three pairs of spermathecal pores in 6/7–8/9 whereas A. dinghuensis is a small, octothecate earthworm with four pairs of spermathecal pores in 5/6–8/9. Amynthas quadriorbis and A. douliouensis were found in the foothills at elevations

This study investigated the biomechanical response of porous cages and lumbar spine segments immediately after surgery and after bone fusion, in addition to the long-term effects of various posterior lumbar interbody fusion (PLIF) techniques, by using the finite element method. Lumbar L3-L4 models based on three PLIF techniques (a single cage at the center of the intervertebral space, a single cage half-anterior to the intervertebral space, and two cages bilateral to the intervertebral space) with and without bone ingrowth were used to determine the biomechanical response of porous cages and lumbar segments instrumented with porous titanium cages (cage porosity=50%, pore diameter=1mm). The results indicated that bone fusion enhanced the stability of the lumbar segments with porous cages without any posterior instrumentation and reduced the peak von Mises stress in the cortical bones and porous cages. Two cages placed bilateral to the intervertebral space achieved the highest structural stability in the lumbar segment and lowest von Mises stress in the cages under both bone fusion conditions. Under identical loading (2-Nm), the range of motion in the single cage at the center of the intervertebral space with bone fusion decreased by 11% (from 1.18? to 1.05?) during flexion and by 66.5% (from 4.46? to 1.5?) during extension in the single cage half-anterior to the intervertebral space with bone fusion compared with no-fusion models. Thus, two porous titanium cages with 50% porosity can achieve high stability of a lumbar segment with PLIF. If only one cage is available, placing the cage half-anterior to the intervertebral space is recommended for managing degenerated lumbar segments. A numerical model containing porous cages and a lumbar segment was developed.The bone tissue ingrowth into the pores of the cage is considered.Bone fusion enhances the stability of the lumbar segment with a porous cage.Bone fusion also reduces the peak von Mises stress in the cortical bone and porous cage.

Peregrine pheretimoid earthworms, commonly known as jumping worms, are members of the family Megascolecidae that have become widely established outside of their native ranges. In many parts of the world this represents a second wave of earthworm invasions, following the introduction of peregrine European earthworms in the family Lumbricidae during the colonial era. Forest ecologists, turf managers, gardeners, and other land managers are concerned about the observed or presumed negative effects of jumping worms on invaded habitats. Although research on jumping worms has accelerated in recent decades, our understanding of their ecology remains limited. We compiled techniques useful to researchers working to fill voids in our understanding. Similar past efforts have focused on tools used to study common European species. Differences in life cycle, behavior, morphology, and physiology make it difficult to transfer experiences with European earthworms to pheretimoids. For example, the loss of reproductive features in many pheretimoid populations poses a challenge for identification, and techniques for individually tagging lumbricid earthworms have been less successful for megascolecids. The active and ongoing expansion of pheretimoid populations in many areas requires increased attention on distributed methods, such as citizen-science protocols, for detecting and tracking their expansion. Finally, the desire to limit populations of pheretimoids, including those invading gardens and other environments that might be successfully restored, has exposed the lack of options for targeted, effective control of unwanted earthworms. We identify opportunities to address these voids in our methodological tool kit and encourage the adaptation of techniques previously used in the study and management of other invasive animals.

This study describes two new species of earthworms belonging to the genus Drawida (Oligochaeta: Moniligastridae) from southwestern Taiwan. They are Drawida alishanensis sp. nov. and Drawida fenqihuensis sp. nov. The two species were found at elevations of 1407–1661 m in the Alishan area, Chiayi County. DNA barcodes from type specimens of the new species are reported. This is the first time that new species of Drawida are discovered from the island of Taiwan. In addition, Drawida keikiensis Kobayashi, 1938 from Korea is found to be synonymous with Drawida syringa Chen, 1933 from central China. The synonymy of Drawida glabella Chen, 1938 with Drawida barwelli (Beddard, 1886) is rejected.

In temperate deciduous forests of eastern USA, most earthworm communities are dominated by invasive species. Their structure and functional group composition have critical impacts on ecological properties and processes. However, the factors determining their community structure are still poorly understood, and little is known regarding their dynamics during forest succession and the mechanisms leading to these changes. Earthworm communities are usually assumed to be stable and driven by vegetation. In contrast, the importance of dispersal and ecological drift is seldom acknowledged. By analyzing a 19-year dataset collected from forest stands in eastern USA, we demonstrated that on a decadal timescale, earthworm community dynamics are shaped by the interplay of selection, dispersal, and ecological drift. We highlighted that forests at different successional stages have distinct earthworm species and functional groups as a result of environmental filtering through leaf litter quality. Specifically, young forests are characterized by soil-feeding species that rely on relatively fresh soil organic matter derived from fast-decomposing litter, whereas old forests are characterized by those feeding on highly processed soil organic matter derived from slow-decomposing litter. In addition, year-to-year species gains and losses are primarily driven by dispersal from regional to local species pools, and by local extinction resulted from competition and ecological drift. We concluded that with continued dispersal of European species and the recent "second wave" of earthworm invasion by Asian species from the surrounding landscape, earthworms at the investigated forests are well-established, and will remain as the major drivers of soil development for the foreseeable future.

Introduction To date, the effects of various screw configurations on the stability of tibial tubercle osteotomy (TTO) are not completely understood. Hence, the first aim of this study is to evaluate the stability of TTO under various screw configurations. The second aim is to evaluate the internal stresses in the bone and the contact forces on the bone fragment that are developed by the tibia and screws in response to the applied load after the equilibrant is revealed. Methods To calculate the biomechanical responses of the bone and screw under loading, finite element (FE) method was used in this study. Six types of screw configurations were studied in the simulation: two parallel horizontal screws placed at a 20 mm interval, two parallel horizontal screws placed at a 30 mm interval, two parallel upward screws, two parallel downward screws, two trapezoid screws, and two divergent screws. The displacement of the bone fragment, contact forces on the fragment, and the internal stress in the bone were used as indices for comparison. Results Among all configurations, the configuration of two parallel downward screws yielded the highest stability with the lowest fragment displacement and gap opening. Although the maximum displacement of the TTO with the configuration of two parallel horizontal screws was slightly higher than that of the downward configuration, the difference was only 0.2 mm. The configuration of two upward screws resulted in the highest fragment displacement and gap deformation between the fragment and tibia. The stress of the osteotomized bone fragment was highest with the configuration of two upward screws. Conclusion Based on the present model, the current configuration of two parallel horizontal screws is recommended for TTO. If this is inappropriate in a specific clinical scenario, then the downward screw configuration may be used as an alternative. By contrast, the configuration of two parallel upward screws is least suggested for the fixation of TTO.

In the present study, the neuroprotective potential of magnolol against ischemia-reperfusion brain injury was examined via in vivo and in vitro experiments. Magnolol exhibited strong radical scavenging and antioxidant activity, and significantly inhibited the production of interleukin‑6, tumor necrosis factor‑a and nitrite/nitrate (NOX) in lipopolysaccharide-stimulated BV2 and RAW 264.7 cells when applied at concentrations of 10 and 50 µM, respectively. Magnolol (100 µM) also significantly attenuated oxygen‑glucose deprivation‑induced damage in neonatal rat hippocampal slice cultures, when administered up to 4 h following the insult. In a rat model of stable ischemia, compared with a vehicle‑treated ischemic control, pretreatment with magnolol (0.01‑1 mg/kg, intravenously) significantly reduced brain infarction following ischemic stroke, and post‑treatment with magnolol (1 mg/kg) remained effective and significantly reduced infarction when administered 2 h following the onset of ischemia. Additionally, magnolol (0.3 and 1 mg/kg) significantly reduced the accumulation of superoxide anions at the border zones of infarction and reduced oxidative damage in the ischemic brain. This was assessed by measuring the levels of NOX, malondialdehyde and myeloperoxidase, the ratio of glutathione/oxidized glutathione and the immunoreactions of 8‑hydroxy‑2'‑deoxyguanosine and 4‑hydroxynonenal. Thus, magnolol was revealed to protect against ischemia‑reperfusion brain damage. This may be partly attributed to its antioxidant, radical scavenging and anti‑inflammatory effects.

International audience; Pontoscolex corethrurus is the most widespread earthworm species in tropical and sub-tropical zones and one of the most studied in soil science. Although, ecological interactions of P. corethrurus with its environment are well documented, the taxonomic status of the species remains unclear. In this study, we investigated phylogenetic relationships within the genus Pontoscolex, in particular focusing on morphologically indistinguishable (i.e., cryptic) lineages. A total of 792 specimens collected from 25 different countries and islands all over the world were analyzed using two mitochondrial (COI and 16S rDNA) and two nuclear (internal transcribed spacers 2 and 28S rDNA) markers, and a total of 11 morphological characters both internal and external were investigated in all genetically characterized lineages. A large-scale multilocus sequence data matrix was also obtained for Pontoscolex spp. specimens using the Anchored Hybrid Enrichment (AHE) method. Multilocus phylogenetic and phylogenomic analyses, combined with species delimitation methods; including single locus (mPTP, ABGD) and multilocus (BPP) approaches, revealed congruent results. Four cryptic species were supported within the P. corethrurus species complex, and four potentially new species within the genus Pontoscolex. One widespread lineage (L1), within P. corethrurus complex was observed in the current population of Fritz Muller's garden where P. corethrurus was first described in 1856. Cryptic lineages were observed in sympatry at several localities. This, in combination with observed heteroplasmy in COI gene in one population raises an important question of reproductive isolation between these species.

Substrates with a unique stable isotope signature provide researchers with the ability to trace nutrients through food webs. Plant material labeled with carbon (13C) can be produced by exposure to carbon dioxide (CO2) with an isotopic composition that differs from ambient conditions during photosynthesis. Labeling can occur continuously or be repeated over several “pulses.” Each method has a high cost either in the form of expensive control systems or significant time investments. In 2012, we built a large growth chamber and used an inexpensive, open-source ArduinoTM microcontroller to monitor and control interior conditions so that we could produce leaf litter dually enriched in 13C and nitrogen (15N) for future incubation experiments. We performed a labeling experiment on 73 saplings representing seven species in 2012 and repeated the labeling on 30 saplings of one species in 2013. We successfully produced over 1 kg of litter enriched in both isotopes; 15N-enrichment (δ15N: 759.2 ± 133.7‰) was much grea...

This paper addressed a new lane departure warning system (LDWS). We used the side-view cameras to promote Advanced Driver Assistance Systems (ADAS). A left side-view camera detected the right lane next to vehicle, and a right side-view camera detected the right lane. Two cameras processed in their algorithm and gave warning message, independently and separately. Our algorithm combined those warning messages to analyze environment situations. At the end, we used the LUXGEN MPV to test and showed results of verifications and tests.

The objective of this study is to determine the size range where the recovery coefficient (RC) method of fluorodeoxyglucose (FDG) positron emission tomography–computed tomography (PET–CT) is helpful in detecting lateral retropharyngeal lymph (LRPL) nodal metastases of nasopharyngeal carcinoma (NPC) patients previously treated with radiation therapy. A total of 142 LRPL nodes assessed by magnetic resonance imaging (MRI) in 71 NPC patients were chosen for investigation. LRPL nodes with central necrosis, extracapsular invasion, or asymmetric grouping or those ascertained on follow-up MRI scans were considered positive for metastases. The criterion for positive diagnosis of nodal metastasis on FDG PET–CT scans was defined as maximal standard uptake value (SUVmax) ≥ 2.5. Nodes not separated from main tumors were excluded. An established RC method, the sphere-to-background ratio, was employed. Nodes were further categorized into three groups of minimal axial diameters: below 6, 6–7 mm, and above 7 mm. A total of 88 nodes were examined by FDG PET. Thirty-five nodes were positive and 53 nodes were negative. The RC method significantly improved sensitivity (from 20 to 100 %) and accuracy (from 14 to 71 %) for nodes sized 6–7 mm. In LRPL nodes above 7 mm, the RC method also provided slight improvement, with sensitivity and accuracy both increasing from 92 to 96 %. However, the nodal sizes below 6 mm were too small for valid comparisons. In conclusion, partial volume correction in FDG PET–CT enhances the accuracy of detecting nodes in the equivocal size range of 6–7 mm for LRPL nodal metastases of NPC.

[Purpose] Limited research has been performed in spite of biomechanical evaluation of jump landing with kinesio taping. Therefore, the main objective of this study was to evaluate the effect of kinesio taping applied to athletes. In this study, the authors wished to investigate the effect of kinesio taping during a vertical jump with run-up and countermovement jump on ankle functional instability. [Subjects and Methods] Ten male athletes with ankle functional instability (FI) were recruited in this study from a college volleyball team. Each participant was requested to perform two tasks, the countermovement jump and vertical jump with run-up. Infrared high-speed cameras and force plates were used to assess the effect of ankle taping. [Results] The results showed that the peak ground reaction force in the sagittal plane during a vertical jump with run-up slowed down after kinesio taping and that the peak ankle plantar flexion moment in both types of jump also decreased. [Conclusion] In conclusion, this study proved the effect of kinesio taping on ankle functional instability, which was evaluated by measuring the vertical ground reaction force and peak plantar flexion moment. Its finding may allow us to provide some recommendations for athletes and trainers.

Objectives Focal cerebral ischemia may induce synaptic, electrophysiological, and metabolic dysfunction in remote areas. We have shown that the remote dendritic spine density changes and electrophysiological diaschisis in the acute and subacute stages after stroke previously. Here, we further evaluated electrophysiological outcomes and synapto-dendritic plasticity in long-term recovery in the contralateral cortex following focal cerebral ischemia. Methods Male Sprague-Dawley rats were subjected to intraluminal suture occlusion for 90 min or sham-occlusion. Somatosensory electrophysiological recordings (SSEPs) and neurobehavioral tests were recorded each day for 28 days. Postmortem brains were sectioned and subjected to Nissl staining and Golgi-Cox impregnation through a 28-day period following ischemic stroke. Results In the ipsilateral cortex, infarct size in the cortex and striatum was decreased after the subacute stage; the brains showed reduced swelling in the cortex and stratum 3 days after ischemic insults. Dendritic spine density and SSEP amplitude decreased significantly during a 28-day recovery period. In the contralateral cortex, dendritic spine density and SSEP amplitude decreased significantly for 21 days after ischemic stroke, but recovered to baseline by day 28. The deterioration of the dendritic spine (density reduction) in the ischemic cortex was observed; however, this increased neuroplasticity in the contralateral cortex in the subacute stage. Discussion Focal cerebral ischemia-reperfusion induces time-dependent reduction of dendritic spine density and electrophysiological depression in both the ipsilateral and contralateral cortices and intact brain. This neuroanatomical and electrophysiological evidence suggests that neuroplasticity and functional re-organization in the contralateral cortex is possible following focal cerebral ischemia.

This paper proposed a novel method to improve automatic age estimation from human faces. Three types of feature extraction algorithms are used, such as Extended Curvature Gabor Filter (ECG), Completed Local Binary Pattern (CLBP), and Local Directional Pattern (LDP). While the ECG is applied to the entire human face, CLBP and LDP are only applied to blocks with randomized scales, positions and orientations. Then, Support Vector Machine is used to estimate the age from combined feature histograms. The Mean Absolute Error of the proposed method is 4.49 years old, which is better than existing methods.

Objective: This study aimed to verify and compare the accuracy of energy expenditure (EE) prediction models using shoe-based motion detectors with embedded accelerometers. Methods: Three physical activity (PA) datasets (unclassified, recognition, and intensity segmentation) were used to develop three prediction models. A multiple classification flow and these models were used to estimate EE. The “unclassified” dataset was defined as the data without PA recognition, the “recognition” as the data classified with PA recognition, and the “intensity segmentation” as the data with intensity segmentation. The three datasets contained accelerometer signals (quantified as signal magnitude area (SMA)) and net heart rate (HRnet). The accuracy of these models was assessed according to the deviation between physically measured EE and model-estimated EE. Results: The variance between physically measured EE and model-estimated EE expressed by simple linear regressions was increased by 63% and 13% using SMA and HRnet, respectively. The accuracy of the EE predicted from accelerometer signals is influenced by the different activities that exhibit different count-EE relationships within the same prediction model. Conclusion: The recognition model provides a better estimation and lower variability of EE compared with the unclassified and intensity segmentation models. Significance: The proposed shoe-based motion detectors can improve the accuracy of EE estimation and has great potential to be used to manage everyday exercise in real time.

Rocker-soled shoes provide a way to reduce the possible concentration of stress, as well as change movement patterns, during gait. This study attempts to examine how plantar force and spatio-temporal variables are affected by two rocker designs, one with softer and one with denser sole materials, by comparing them with the barefoot condition and with flat-soled shoes. Eleven subjects' gait parameters during walking and jogging were recorded. Our results showed that compared with barefoot walking, plantar forces were higher for flat shoes while lower for both types of rocker shoes, the softer-material rocker being the lowest. The plantar force of flat shoes is greater than the vertical ground reaction force, while that of both rocker shoes is much less, 13.87-30.55% body weight. However, as locomotion speed increased to jogging, for all shoe types, except at the second peak plantar force of the denser sole material rocker shoes, plantar forces were greater than for bare feet. More interestingly, because the transmission of force was faster while jogging, greater plantar force was seen in the rocker-soled shoes with softer material than with denser material; results for higher-speed shock absorption in rocker-soled shoes with softer material were thus not as good. In general, the rolling phenomena along the bottom surface of the rocker shoes, as well as an increase in the duration of simultaneous curve rolling and ankle rotation, could contribute to the reduction of plantar force for both rocker designs. The possible mechanism is the conversion of vertical kinetic energy into rotational kinetic energy. To conclude, since plantar force is related to foot-ground interface and deceleration methods, rocker-design shoes could achieve desired plantar force reduction through certain rolling phenomena, shoe-sole stiffness levels, and locomotion speeds.

The family Lumbricidae is arguably the most well-known and well-studied earthworm group due to its dominance in the European earthworm fauna and its invasion in temperate regions worldwide. However, its North American members, especially the genus Bimastos Moore, 1893, are poorly understood. We revised the systematics of the genus Bimastos and tested the hypothesis of the monophyly of North American lumbricids using morphological characters and eight molecular markers. Phylogenetic analyses based on our extensive sampling of Bimastos and inclusion of Dendrodrilus and Allolobophoridella indicated a well-supported clade containing Bimastos and Eisenoides Gates, 1969, and provided the first evidence supporting that North American lumbricids are monophyletic. Assuming the available divergence time estimations and dating of land bridges are correct, it would suggest that the ancestor of this clade arrived North America through Beringia or the De Geer route during Late Cretaceous, and since then the clade has diverged from its Eurasian sister group, Eisenia. The peregrine genera Dendrodrilus and Allolobophoridella are nested within the Bimastos clade; we propose to treat them as junior synonyms of the genus Bimastos, and, contradictory to the commonly held belief of being European, they are indeed part of the indigenous North American earthworm fauna. Morphological characters, such as red-violet pigmentation, proclinate U-shaped nephridial bladders and calciferous diverticula in segment 10 further support this placement. The East Mediterranean-Levantine Spermophorodrilus Bouche, 1975 and Healyella Omodeo & Rota, 1989 are nested within the Dendrobaena sensu lato clade; therefore their close relationship with the North American Bimastos is refuted. Species fit the revised diagnosis of Bimastos are reviewed and keyed, and a new species, Bimastos schwerti sp. nov., is described.