Search

The genus Parachironomus has a cosmopolitan distribution including 85 valid described species worldwide. Species records and studies of the genus in the Tibetan Plateau are scarce. In this study, the genus Parachironomus from China is revised and two new species, Parachironomus wangi Liu & Lin, sp. nov. and Parachironomus nankaiensis Liu & Lin, sp. nov., are described based on adult morphology and molecular data. Paracladopelma demissum Yan, Wang & Bu is placed in the genus Parachironomus as a new combination. A neighbor-joining tree was reconstructed based on all known ParachironomusCOI DNA barcodes. A key to adult males of the genus Parachironomus from China is also provided.

Fatigue and corrosion are the main reasons for the failure of stay cables. Traffic load also plays a significant role in cable fatigue. To study the fatigue life of stay cables under the combined action of traffic load and corrosion, this study originally deduced the fatigue probability model for steel wires, considering the stress range and average stress based on the nonlinear fatigue damage model. Then, the weight loss rate was introduced into the fatigue probability model for steel wires in order to obtain the fatigue life probability model for corroded steel wires. Subsequently, a Monte Carlo simulation (MCS) was conducted to predict the fatigue life of stay cables under different guaranteed probabilities. Finally, using a cable-stayed bridge on the Yangtze River in China as an example, the fatigue life of the stay cables in the bridge under the combined effects of different corrosive environments and measured traffic loads was evaluated. Results indicate that both the stress range and mean stress affect the fatigue life of the steel wire. The fatigue life of stay cables is determined by a few steel wires with shorter lives, and the stress redistribution accelerates the failure of the inner wire of the stay cables. The fatigue life of the stay cables on background engineering is much less than the design life of the bridge under the combined actions of a middle-level or high-level corrosive environment and traffic load.

NaCl crystals are employed as a substrate to grow MoS2 nanosheets. On dissolving NaCl, the nanosheets are introduced to silicon nanoparticles using layer-by-layer assembly forming robust MoS2@Si anodes for lithium-ion batteries.

A supramolecular glycomaterial has been developed using the self-assembly of pyrenyl glycosides and graphene nanoribbon-based nanowires for the targeted, photothermally-controlled release of antibiotics to bacteria.

Aim: Achieving drug-targeting delivery and environment-responsive releasing to realize imaging-guided precise tumor therapy. Materials & methods: Graphene oxide (GO) was used as the drug-delivery system to load indocyanine green (ICG) and doxorubicin (DOX) to form a GO/ICG&DOX nanoplatform, in which GO can quench the fluorescence of ICG and DOX. MnO2 and folate acid-functionalized erythrocyte membrane were further coated into the surface of GO/ICG&DOX to obtain an FA-EM@MnO2-GO/ICG&DOX nanoplatform. Results: The FA-EM@MnO2-GO/ICG&DOX nanoplatform has longer blood circulation time, precise targeting delivery to tumor tissues and catalase-like activity. Both in vitro and in vivo results demonstrated that the FA-EM@MnO2-GO/ICG&DOX nanoplatform has better therapeutic efficacy. Conclusion: The authors successfully fabricated a glutathione-responsive FA-EM@MnO2-GO/ICG&DOX nanoplatform, which can achieve drug-targeting delivery and precise drug release.

A metastable bimetallic ZnCo-ZIF-L topochemical phase conversion and subsequent pyrolysis strategy was developed to fabricate Co–N–C@NCNTs, which exhibit excellent ORR/OER performance with an overpotential gap of 0.748 V.

Photoredox-catalyzed hydroxyalkylation of azole derivatives with aldehydes as hydroxyalkylation reagents in the aqueous phase under an air atmosphere was developed.

In-plane memristor fabricated based on a TiS3–TiOx–TiS3 heterostructure demonstrates excellent synaptic characteristics with tunable and multiple resistance levels, which can be integrated into a neural network for high-accuracy pattern recognition.

A mechanically strong binder with polar functional groups could overcome the dilemma of the large volume change during charge/discharge processes and poor cyclability of lithium-sulfur batteries (LSBs). In this work, for the first time, we report the use of poly(thiourea triethylene glycol) (PTTG) as a multifunctional binder for sulfur cathodes to enhance the performance of LSBs. As expected, the PTTG binder facilitates the high performance and stability delivered by the Sulfur-PTTG cathode, including a higher reversible capacity of 825 mAh g−1 at 0.2 C after 80 cycles, a lower capacity fading (0.123% per cycle) over 350 cycles at 0.5 C, a higher areal capacity of 2.5 mAh cm−2 at 0.25 mA cm−2, and better rate capability of 587 mAh g−1 at 2 C. Such superior electrochemical performances could be attributed to PTTG's strong chemical adsorption towards polysulfides which may avoid the lithium polysulfide shuttle effect and excellent mechanical characteristics which prevents electrode collapse during cycling and allows the Sulfur-PTTG electrode to maintain robust electron and ion migration pathways for accelerated redox reaction kinetics.

Gastric cancer is one of the most lethal human malignancies in the world. Although great efforts are put in developing novel therapeutic targets, the effective targeting drugs are still limited. Recent studies reveal the abnormality of Hippo/YAP axis play critical role in the oncogenic process of gastric cancer. It is of great importance to demonstrate the regulation of Hippo signaling activity and YAP protein turnover in gastric cancer. Besides, the phosphorylation cascade on YAP function, which has been thoroughly investigated, the ubiquitination of YAP is also important in Hippo signaling status. Here, We utilized the DUB (Deubiquitinase) siRNA library to identify critical DUB for Hippo signaling. We discovered OTUB1 as a critical factor to facilitate gastric cancer cell stemness and progression, which deubiquitinated and stabilized YAP protein. The clinical data analysis implicated OTUB1 was higher expressed in gastric cancer, which correlated with YAP activity and poor survival. OUTB1 interacted with YAP protein via its OTU domain (Ovarian tumor domain) and deubiquitinated YAP at several lysine sites (K90, K280, K343, K494 and K497), which subsequently inhibited YAP degradation. Our study revealed a novel deubiquitinase of Hippo/YAP axis and one possible therapeutic target for YAP-driven gastric cancer.

A large number of pathogenic bioaerosols are generated during the treatment process of wastewater treatment plants (WWTPs), and they can pose potential risks to human health. Therefore, this study systematically analyzed the emission characteristics of Staphylococcus aureus bioaerosols released from an inverted umbrella aeration tank, a microporous aeration tank, and a residual sludge storage yard in a WWTP, and quantitatively evaluated the health risks of four kinds of exposed populations with nasal/oral breathing patterns under optimistic and conservative estimations. The results displayed that the bioaerosol concentration in inverted umbrella aeration tank was higher than that in microporous aeration tank and residual sludge storage yard. Aerosolization ratio in residual sludge storage yard was an order of magnitude lower than that in aeration tanks. Sludge workers were at higher health risks than the other three exposed populations. The health risks of nasal breathers (infection risk: 1.62 × 10

A solid electrolyte interphase (SEI) with robust mechanical property and high ionic conductivity is imperative for high-performance lithium metal batteries since it can efficiently impede the growth of notorious lithium dendrites. However, it is difficult to form such a SEI directly from an electrolyte. In this work, a crowding dilutant modified ionic liquid electrolyte (M-ILE) has been developed for this purpose. Simulations and experiments indicate that the 1,2-difluorobenzene (1,2-dfBen) dilutant not only creates a crowded electrolyte environment to promote the interaction of Li

Salt stress is a major abiotic stress with detrimental effects on plants. Sucrose, the main product of photosynthesis in plants, is used as a source of energy for the development of Chinese rose (Rosa chinensis). Hua Xianzi, a variety of Chinese rose, was investigated in this study. Phenotypic traits such as digital biomass, greenness average, leaf angle and leaf area, as well as physiological characters such as proline (Pro), malondialdehyde (MDA), H2O2, O2- and antioxidant enzymes such as SOD (Superoxide Dismutase), POD (Peroxidase), CAT (Catalase) and APX (Ascorbate Peroxidase), changed significantly in response to salt stress (150 mmol/L NaCl for 72 h). The physiological changes were examined based on photosynthetic and fluorescence indicators. Salt stress increased the concentration of glucose, fructose and sucrose, upregulated the expression of Rc-SS1, Rc-SS2, Rc-SPS1, Rc-SPS2, Rc-αA1, Rc-αA2, Rc-αA3, Rc-βA1 and Rc-βA3 genes. Finally, it decreased the starch content in leaves. This study revealed that salt stress disrupted the equilibrium of sucrose metabolism in leaves. This finding provides the basis for further research into the mechanism of salt tolerance adaption.

Previous experimental and computational results have confirmed that the thermal conductivity of a two-dimensional (2D) material can be considerably affected by strain. Numerous attention has been paid to explore the relevant mechanisms. However, the strain effects on the interfacial thermal conductance (ITC) of 2D heterostructure have attracted little attention. Herein, the non-equilibrium molecular dynamics (NEMD) simulations were conducted to the graphene/hexagonal boron nitride (GR/h-BN) heterostructure to investigate the strain effects on the ITC. Three types of strains were considered, i.e., tensile strain, compressive strain, and shear strain. The results indicate that the strain can adjust the ITC for the GR/h-BN heterostructure effectively, and the strain loading direction also influences the ITC. Generally, the tensile strain reduces the ITC of the heterostructure, in addition to the BN-C system at small tensile strain; both the compressive strain and shear strain increase the ITC, especially at a small strain. For the NB-C system, it is more sensitive to the strain loading direction and the yx shear strain of 0.06 is the most effective way to strengthen the ITC. Our results also show that the out-of-plane deformation weakens the in-plane vibration of atoms, leading to a reduction of the interfacial thermal energy transport.

As an alternative for commercial enzyme, crude enzyme of fungal mash could promote food waste (FW) hydrolysis, but its specific effects coupled pH adjusting on the production of volatile fatty acids (VFAs) remains unknown. The crude enzyme produced from an Aspergillus awamori, named complex-amylase (CA), was added to short-term anaerobic system of FW fermentation. Results showed that adding CA significantly improved the solubility and degradability of biodegradable and non-biodegradable organics in FW, where the SCOD concentration with adding CA increased by 116.9% relative to the control but a marginal enhancement on VFAs yield. In contrast, adding CA combined with adjusting pH 8 markedly increased the VFAs production to 32.0 g COD/L, almost 10 times as much as the control. Besides, pH adjusting altered the metabolic pathway from lactate-type to butyrate-type. Adding CA coupled pH adjusting significant increase the component of butyrate compared with pH adjusting alone. Moreover, microbial community analysis indicated that adding CA reinforced proportion of the butyrate-producing bacteria (e.g., Dialister) under basic conditions, thus enhancing the butyrate metabolic pathways. This study demonstrated that fungal mash pretreatment coupled pH conditioning could be an economical way to enhance VFAs yield for FW valorization during anaerobic fermentation.

Objective: Devices for cuffless blood pressure (BP) measurement have become increasingly widespread in recent years. Non-invasive continuous BP monitor (BPM) devices can diagnose potential hypertensive patients at an early stage; however, these cuffless BPMs require more reliable pulse wave simulation equipment and verification methods. Therefore, we propose a device to simulate human pulse wave signals that can test the accuracy of cuffless BPM devices using pulse wave velocity (PWV). Methods: We design and develop a simulator capable of simulating human pulse waves comprising an electromechanical system to simulate the circulatory system and an arm model-embedded arterial phantom. These parts form a pulse wave simulator with hemodynamic characteristics. We use a cuffless device for measuring local PWV as the device under test to measure the PWV of the pulse wave simulator. We then use a hemodynamic model to fit the cuffless BPM and pulse wave simulator results; this model can rapidly calibrate the cuffless BPM’s hemodynamic measurement performance. Results: We first used multiple linear regression (MLR) to generate a cuffless BPM calibration model and then investigated differences between the measured PWV with and without MLR model calibration. The mean absolute error of the studied cuffless BPM without the MLR model is 0.77 m/s, which improves to 0.06 m/s when using the model for calibration. The measurement error of the cuffless BPM at BPs of 100–180 mmHg is 1.7–5.99 mmHg before calibration, which decreases to 0.14–0.48 mmHg after calibration. Conclusion: This study proposes a design of a pulse wave simulator based on hemodynamic characteristics and provides a standard performance verification method for cuffless BPMs that requires only MLR modeling on the cuffless BPM and pulse wave simulator. The pulse wave simulator proposed in this study can be used to quantitively assess the performance of cuffless BPMs. The proposed pulse wave simulator is suitable for mass production for the verification of cuffless BPMs. As cuffless BPMs become increasingly widespread, this study can provide performance testing standards for cuffless devices.

With increasing demand for efficient archive management, robots have been employed in paper-based archive management for large, unmanned archives. However, the reliability requirements of such systems are high due to their unmanned nature. To address this, this study proposes a paper archive access system with adaptive recognition for handling complex archive box access scenarios. The system comprises a vision component that employs the YOLOV5 algorithm to identify feature regions, sort and filter data, and to estimate the target center position, as well as a servo control component. This study proposes a servo-controlled robotic arm system with adaptive recognition for efficient paper-based archive management in unmanned archives. The vision part of the system employs the YOLOV5 algorithm to identify feature regions and to estimate the target center position, while the servo control part uses closed-loop control to adjust posture. The proposed feature region-based sorting and matching algorithm enhances accuracy and reduces the probability of shaking by 1.27% in restricted viewing scenarios. The system is a reliable and cost-effective solution for paper archive access in complex scenarios, and the integration of the proposed system with a lifting device enables the effective storage and retrieval of archive boxes of varying heights. However, further research is necessary to evaluate its scalability and generalizability. The experimental results demonstrate the effectiveness of the proposed adaptive box access system for unmanned archival storage. The system exhibits a higher storage success rate than existing commercial archival management robotic systems. The integration of the proposed system with a lifting device provides a promising solution for efficient archive management in unmanned archival storage. Future research should focus on evaluating the system’s performance and scalability.