Search

We present an atmospheric analysis of LTT 9779 b, a rare planet situated in the hot Neptune desert, that has been observed with HST WFC3 G102 and G141. The combined transmission spectrum, which covers 0.8 - 1.6 $\mu$m, shows a gradual increase in transit depth with wavelength. Our preferred atmospheric model shows evidence for H$_{\rm 2}$O, CO$_{\rm 2}$ and FeH with a significance of 3.1 $\sigma$, 2.4 $\sigma$ and 2.1 $\sigma$, respectively. In an attempt to constrain the rate of atmospheric escape for this planet, we search for the 1.083 $\mu$m Helium line in the G102 data but find no evidence of excess absorption that would indicate an escaping atmosphere using this tracer. We refine the orbital ephemerides of LTT 9779 b using our HST data and observations from TESS, searching for evidence of orbital decay or apsidal precession, which is not found. The phase-curve observation of LTT 9779 b with JWST NIRISS should provide deeper insights into the atmosphere of this planet and the expected atmospheric escape might be detected with further observations concentrated on other tracers such as Lyman $\alpha$., Comment: Accepted for publication in AJ

Close-in giant exoplanets with temperatures greater than 2,000 K (''ultra-hot Jupiters'') have been the subject of extensive efforts to determine their atmospheric properties using thermal emission measurements from the Hubble and Spitzer Space Telescopes. However, previous studies have yielded inconsistent results because the small sizes of the spectral features and the limited information content of the data resulted in high sensitivity to the varying assumptions made in the treatment of instrument systematics and the atmospheric retrieval analysis. Here we present a dayside thermal emission spectrum of the ultra-hot Jupiter WASP-18b obtained with the NIRISS instrument on JWST. The data span 0.85 to 2.85 $\mu$m in wavelength at an average resolving power of 400 and exhibit minimal systematics. The spectrum shows three water emission features (at $>$6$\sigma$ confidence) and evidence for optical opacity, possibly due to H$^-$, TiO, and VO (combined significance of 3.8$\sigma$). Models that fit the data require a thermal inversion, molecular dissociation as predicted by chemical equilibrium, a solar heavy element abundance (''metallicity'', M/H = 1.03$_{-0.51}^{+1.11}$ $\times$ solar), and a carbon-to-oxygen (C/O) ratio less than unity. The data also yield a dayside brightness temperature map, which shows a peak in temperature near the sub-stellar point that decreases steeply and symmetrically with longitude toward the terminators., Comment: JWST ERS bright star observations. Uploaded to inform JWST Cycle 2 proposals. Manuscript under review. 50 pages, 14 figures, 2 tables

YunMa is a cloud simulation and retrieval package for the retrieval study of cloudy atmospheres of exoplanets in transit spectroscopy. It is integrated into the TauREx 3 retrieval platform and has a flexible API for taking cloud models coded in Python.

In this paper, we present YunMa, a model which enables the study of cloud microphysics and radiative properties in exoplanetary atmospheres. YunMa simulates the vertical distribution and sizes of cloud particles and their corresponding scattering signature in transit spectra. We validated YunMa against results from the literature. When coupled to the TauREx 3 platform, an open Bayesian framework for spectral retrievals, YunMa enables the retrieval of the cloud properties and parameters from transit spectra of exoplanets. The sedimentation efficiency ($f_{sed}$), which controls the cloud microphysics, is set as a free parameter in retrievals. We assess the retrieval performances of YunMa through 28 instances of a cloudy super-Earth's atmosphere. This work also highlights the need for cloud radiative transfer and microphysics modelling to retrieve next-generation data of exoplanets., Comment: 24 pages, 12 figures, submitted to ApJ

Carbon dioxide (CO2) is a key chemical species that is found in a wide range of planetary atmospheres. In the context of exoplanets, CO2 is an indicator of the metal enrichment (i.e., elements heavier than helium, also called "metallicity"), and thus formation processes of the primary atmospheres of hot gas giants. It is also one of the most promising species to detect in the secondary atmospheres of terrestrial exoplanets. Previous photometric measurements of transiting planets with the Spitzer Space Telescope have given hints of the presence of CO2 but have not yielded definitive detections due to the lack of unambiguous spectroscopic identification. Here we present the detection of CO2 in the atmosphere of the gas giant exoplanet WASP-39b from transmission spectroscopy observations obtained with JWST as part of the Early Release Science Program (ERS). The data used in this study span 3.0 to 5.5 {\mu}m in wavelength and show a prominent CO2 absorption feature at 4.3 {\mu}m (26{\sigma} significance). The overall spectrum is well matched by one-dimensional, 10x solar metallicity models that assume radiative-convective-thermochemical equilibrium and have moderate cloud opacity. These models predict that the atmosphere should have water, carbon monoxide, and hydrogen sulfide in addition to CO2, but little methane. Furthermore, we also tentatively detect a small absorption feature near 4.0 {\mu}m that is not reproduced by these models., Comment: 27 pages, 6 figures, Accepted for publication in Nature, data and models available at https://doi.10.5281/zenodo.6959427

Stellar activity in the form of photospheric heterogeneities such as spots and faculae may present a significant noise source for exoplanetary observations by introducing a chromatic contamination effect to the observed transmission spectrum. If this contamination is not identified and corrected for, it can introduce substantial bias in our analysis of the planetary atmosphere. In this work we aim to determine how physically realistic and complex our stellar models must be in order to accurately extract the planetary parameters from transmission spectra. We explore which simplifying assumptions about the host star are valid at first order and examine if these assumptions break down in cases of extreme stellar activity. To do this, we use a more complex stellar model (StARPA) as the input observation for a combined stellar-planetary retrieval with TauREx3, in which the contamination is accounted for using a simplified stellar model (ASteRA). Using the StARPA model as a benchmark, we validate the use of ASteRA using a retrieval framework of 27 simulated, spot-contaminated transmission spectra to determine in which conditions it performs most favourably. For cases of low to moderate stellar activity ASteRA performs well, retrieving the planetary parameters with a high degree of accuracy. For the most active cases some residual contamination remains due to ASteRA neglecting the effect of limb darkening. Nevertheless, using ASteRA presents a substantial improvement over neglecting the contamination entirely, which can result in retrieved planetary parameters that are incorrect by up to two orders of magnitude., Comment: 26 pages, 14 figures, submitted to ApJ

Studying chemistry and chemical composition is fundamental to go back to formation history of planetary systems. We propose here to have another look at five targets to better determine their composition and the chemical mechanisms that take place in their atmospheres. We present a re-analysis of five Hot Jupiters, combining multiple instruments and using Bayesian retrieval methods. We compare different combinations of molecules present in the simulated atmosphere, different chemistry types as well as different clouds parametrization. As a consequence of recent studies questioning the detection of Na and K in the atmosphere of HD 209458b as being potentially contaminated by stellar lines when present, we study the impact on other retrieval parameters of misinterpreting the presence of these alkali species. We use spatially scanned observations from the grisms G102 and G141 of the WFC3 on HST, with a wavelength coverage of $\sim$0.8 to $\sim$1.7 microns. We analyse these data with the publicly available Iraclis pipeline. We added to our datasets STIS observations to increase our wavelength coverage from $\sim$0.4 to $\sim$1.7 microns. We then performed a Bayesian retrieval analysis with the open-source TauREx using a nested sampling algorithm. We explore the influence of including Na and K on the retrieval of the molecules from the atmosphere. Our data re-analysis and Bayesian retrieval are consistent with previous studies but we find small differences in the retrieved parameters. After all, Na and K has no significant impact on the properties of the planet atmospheres. Therefore, we present here our new best-fit models, taking into account molecular abundances varying freely and equilibrium chemistry. This work is a preparation for a future addition of more sophisticated representation of chemistry taking into account disequilibrium effects such as vertical mixing and photochemistry., Comment: 19 pages, 14 figures

Aims. We analyse unpublished Spitzer observations of the thermal phase-curve of WASP-121 b, a benchmark ultra-hot Jupiter. Methods. We adopted the wavelet pixel-independent component analysis technique to remove challenging instrumental systematic effects in these datasets and we fit them simultaneously with parametric light-curve models. We also performed phase-curve retrievals to better understand the horizontal and vertical thermal structure of the planetary atmosphere. Results. We measured planetary brightness temperatures of $\sim$2700\,K (dayside) and $\sim$700--1100\,K (nightside), along with modest peak offsets of 5.9$^{\circ} \pm$1.6 (3.6\,$\mu$m) and 5.0$^{\circ}$$_{-3.1}^{+3.4}$ (4.5\,$\mu$m) after mid-eclipse. These results suggest inefficient heat redistribution in the atmosphere of WASP-121 b. The inferred atmospheric Bond albedo and circulation efficiency align well with observed trends for hot giant exoplanets. Interestingly, the measured peak offsets correspond to a westward hot spot, which has rarely been observed. We also report consistent transit depths at 3.6 and 4.5\,$\mu$m, along with updated geometric and orbital parameters. Finally, we compared our Spitzer results with previous measurements, including recent JWST observations. Conclusions. We extracted new information on the thermal properties and dynamics of an exoplanet atmosphere from an especially problematic dataset. This study probes the reliability of exoplanet phase-curve parameters obtained from Spitzer observations when state-of-the-art pipelines are adopted to remove the instrumental systematic effects. It demonstrates that Spitzer phase-curve observations provide a useful baseline for comparison with JWST observations, and shows the increase in parameters precision achieved with the newer telescope., Comment: Accepted by A&A, 14 pages, 10 figures

We present the analysis of the atmospheres of 70 gaseous extrasolar planets via transit spectroscopy with Hubble's Wide Field Camera 3 (WFC3). For over half of these, we statistically detect spectral modulation which our retrievals attribute to molecular species. Among these, we use Bayesian Hierarchical Modelling to search for chemical trends with bulk parameters. We use the extracted water abundance to infer the atmospheric metallicity and compare it to the planet's mass. We also run chemical equilibrium retrievals, fitting for the atmospheric metallicity directly. However, although previous studies have found evidence of a mass-metallicity trend, we find no such relation within our data. For the hotter planets within our sample, we find evidence for thermal dissociation of dihydrogen and water via the H$^-$ opacity. We suggest that the general lack of trends seen across this population study could be due to i) the insufficient spectral coverage offered by HST WFC3 G141, ii) the lack of a simple trend across the whole population, iii) the essentially random nature of the target selection for this study or iv) a combination of all the above. We set out how we can learn from this vast dataset going forward in an attempt to ensure comparative planetology can be undertaken in the future with facilities such as JWST, Twinkle and Ariel. We conclude that a wider simultaneous spectral coverage is required as well as a more structured approach to target selection., Accepted for publication in ApJS

We introduce a new chemical kinetic code FRECKLL (Full and Reduced Exoplanet Chemical Kinetics distiLLed) to evolve large chemical networks efficiently. FRECKLL employs `distillation' in computing the reaction rates, which minimizes the error bounds to the minimum allowed by double precision values ($\epsilon \leq 10^{-15}$). FRECKLL requires less than 5 minutes to evolve the full Venot2020 network in a 130 layers atmosphere and 30 seconds to evolve the Venot2020 reduced scheme. Packaged with FRECKLL is a TauREx 3.1 plugin for usage in forward modelling and retrievals. We present TauREx retrievals performed on a simulated HD189733 JWST spectra using the full and reduced Venot2020 chemical networks and demonstrate the viability of total disequilibrium chemistry retrievals and the ability for JWST to detect disequilibrium processes., Comment: 13 pages, 8 figures

This is an exciting era for exo-planetary exploration. In the past two decades, astronomers have harvested data from all the observatories at their disposal. Those collective efforts allowed us to have a glimpse at the convoluted process of planetary formation and evolution and its connections to atmospheric compositions, but nevertheless remained limited by the low quality and scarcity of exo-atmospheric data. Now, the recently launched JWST, and other upcoming space missions such as Ariel, Twinkle and ELTs are set to anew the landscape, bringing fresh insights to these remote worlds. However, with new opportunities come new challenges. The field of exoplanet atmospheres is already struggling with the incoming volume and quality of data, and machine learning (ML) techniques lands itself as a promising alternative. Developing techniques of this kind is an inter-disciplinary task, one that requires domain knowledge of the field, access to relevant tools and expert insights on the capability and limitations of current ML models. These stringent requirements have so far limited the developments of ML in the field to a few isolated initiatives. As part of the data product of the NeurIPS 2022 Data challenge, we would like to present the Ariel Big Challenge Database (ABC Database), a carefully designed, organised and publicly available database. With 105,887 forward models, 26,109 complementary posterior distributions and an easy-to-understand documentation, this represents an unprecedented effort to invite cross-disciplinary experts to the study of the inverse problem in the context of exoplanetary studies., 18 pages, paper submitted to RASTI, challenge accepted in NeurIPS 2022. Database link: https://doi.org/10.5281/zenodo.6770103

The study of extra-solar planets, or simply, exoplanets, planets outside our own Solar System, is fundamentally a grand quest to understand our place in the Universe. Discoveries in the last two decades have re-defined our understanding of planets, and helped us comprehend the uniqueness of our very own Earth. In recent years the focus has shifted from planet detection to planet characterisation, where key planetary properties are inferred from telescope observations using Monte Carlo-based methods. However, the efficiency of sampling-based methodologies is put under strain by the high-resolution observational data from next generation telescopes, such as the James Webb Space Telescope and the Ariel Space Mission. We are delighted to announce the acceptance of the Ariel ML Data Challenge 2022 as part of the NeurIPS competition track. The goal of this challenge is to identify a reliable and scalable method to perform planetary characterisation. Depending on the chosen track, participants are tasked to provide either quartile estimates or the approximate distribution of key planetary properties. To this end, a synthetic spectroscopic dataset has been generated from the official simulators for the ESA Ariel Space Mission. The aims of the competition are three-fold. 1) To offer a challenging application for comparing and advancing conditional density estimation methods. 2) To provide a valuable contribution towards reliable and efficient analysis of spectroscopic data, enabling astronomers to build a better picture of planetary demographics, and 3) To promote the interaction between ML and exoplanetary science. The competition is open from 15th June and will run until early October, participants of all skill levels are more than welcomed!, Comment: 13 pages, Accepted in the Conference on Neural Information Processing Systems 2022 (NeurIPS 2022), Competition hosted on https://www.ariel-datachallenge.space/

Current endeavours in exoplanet characterisation rely on atmospheric retrieval to quantify crucial physical properties of remote exoplanets from observations. However, the scalability and efficiency of the technique are under strain with increasing spectroscopic resolution and forward model complexity. The situation becomes more acute with the recent launch of the James Webb Space Telescope and other upcoming missions. Recent advances in Machine Learning provide optimisation-based Variational Inference as an alternative approach to perform approximate Bayesian Posterior Inference. In this investigation we combined Normalising Flow-based neural network with our newly developed differentiable forward model, Diff-Tau, to perform Bayesian Inference in the context of atmospheric retrieval. Using examples from real and simulated spectroscopic data, we demonstrated the superiority of our proposed framework: 1) Training Our neural network only requires a single observation; 2) It produces high-fidelity posterior distributions similar to sampling-based retrieval and; 3) It requires 75% less forward model computation to converge. 4.) We performed, for the first time, Bayesian model selection on our trained neural network. Our proposed framework contribute towards the latest development of a neural-powered atmospheric retrieval. Its flexibility and speed hold the potential to complement sampling-based approaches in large and complex data sets in the future., Comment: 16 pages, 4 figures, submitted to ApJ

Deep learning algorithms are growing in popularity in the field of exoplanetary science due to their ability to model highly non-linear relations and solve interesting problems in a data-driven manner. Several works have attempted to perform fast retrievals of atmospheric parameters with the use of machine learning algorithms like deep neural networks (DNNs). Yet, despite their high predictive power, DNNs are also infamous for being 'black boxes'. It is their apparent lack of explainability that makes the astrophysics community reluctant to adopt them. What are their predictions based on? How confident should we be in them? When are they wrong and how wrong can they be? In this work, we present a number of general evaluation methodologies that can be applied to any trained model and answer questions like these. In particular, we train three different popular DNN architectures to retrieve atmospheric parameters from exoplanet spectra and show that all three achieve good predictive performance. We then present an extensive analysis of the predictions of DNNs, which can inform us - among other things - of the credibility limits for atmospheric parameters for a given instrument and model. Finally, we perform a perturbation-based sensitivity analysis to identify to which features of the spectrum the outcome of the retrieval is most sensitive. We conclude that for different molecules, the wavelength ranges to which the DNN's predictions are most sensitive, indeed coincide with their characteristic absorption regions. The methodologies presented in this work help to improve the evaluation of DNNs and to grant interpretability to their predictions., 32 pages, 22 figures. Submitted to AJ. Accepted July 20, 2021

International audience; We present the analysis of the hot-Jupiter KELT-7 b using transmission and emission spectroscopy from the Hubble Space Telescope (HST), both taken with the Wide Field Camera 3 (WFC3). Our study uncovers a rich transmission spectrum which is consistent with a cloud-free atmosphere and suggests the presence of H2O and H-. In contrast, the extracted emission spectrum does not contain strong absorption features and, although it is not consistent with a simple blackbody, it can be explained by a varying temperature-pressure profile, collision induced absorption (CIA) and H-. KELT-7b had also been studied with other space-based instruments and we explore the effects of introducing these additional datasets. Further observations with Hubble, or the next generation of space-based telescopes, are needed to allow for the optical opacity source in transmission to be confirmed and for molecular features to be disentangled in emission.

This paper presents the atmospheric characterisation of three large, gaseous planets: WASP-127b, WASP-79b and WASP-62b. We analysed spectroscopic data obtained with the G141 grism (1.088 - 1.68 $\mu$m) of the Wide Field Camera 3 (WFC3) onboard the Hubble Space Telescope (HST) using the Iraclis pipeline and the TauREx3 retrieval code, both of which are publicly available. For WASP-127 b, which is the least dense planet discovered so far and is located in the short-period Neptune desert, our retrieval results found strong water absorption corresponding to an abundance of log(H$_2$O) = -2.71$^{+0.78}_{-1.05}$, and absorption compatible with an iron hydride abundance of log(FeH)=$-5.25^{+0.88}_{-1.10}$, with an extended cloudy atmosphere. We also detected water vapour in the atmospheres of WASP-79 b and WASP-62 b, with best-fit models indicating the presence of iron hydride, too. We used the Atmospheric Detectability Index (ADI) as well as Bayesian log evidence to quantify the strength of the detection and compared our results to the hot Jupiter population study by Tsiaras et al. 2018. While all the planets studied here are suitable targets for characterisation with upcoming facilities such as the James Webb Space Telescope (JWST) and Ariel, WASP-127 b is of particular interest due to its low density, and a thorough atmospheric study would develop our understanding of planet formation and migration., Comment: Accepted for publication in AJ

TauREx 3 is the next generation of the TauREx exoplanet atmospheric retrieval framework for Windows, Mac, and Linux. It is a complete rewrite with a full Python stack that makes it easy-to-use, high-performance, dynamic, and flexible. The new main TauREx program is built with modularity in mind, allowing the user to augment its functionalities with custom code and efficiently perform retrievals on custom parameters. We achieve this result by dynamic determination of fitting parameters, whereby TauREx 3 can detect new parameters for retrieval from user code through a simple interface. TauREx 3 can act as a library with a simple 'import taurex' command, providing a rich set of classes and functions related to atmospheric modelling. A 10x speedup in forward model computations is achieved as compared to the previous version with a sixfold reduction in retrieval times while maintaining robust results. TauREx 3 is intended as a standalone, all-in-one package for retrievals while the TauREx 3 Python library can build or augment a user's custom data pipeline easily.

State of the art spectral retrieval models of exoplanet atmospheres assume constant chemical profiles with altitude. This assumption is justified by the information content of current datasets which do not allow, in most cases, for the molecular abundances as a function of pressure to be constrained. In the context of the next generation of telescopes, a more accurate description of chemical profiles may become crucial to interpret observations and gain new insights into atmospheric physics. We explore here the possibility of retrieving pressure-dependent chemical profiles from transit spectra, without injecting any priors from theoretical chemical models in our retrievals. The "2-layer" parameterisation presented here allows for the independent extraction of molecular abundances above and below a certain atmospheric pressure. By simulating various cases, we demonstrate that this evolution from constant chemical abundances is justified by the information content of spectra provided by future space instruments. Comparisons with traditional retrieval models show that assumptions made on chemical profiles may significantly impact retrieved parameters, such as the atmospheric temperature, and justify the attention we give here to this issue. We find that the 2-layer retrieval accurately captures discontinuities in the vertical chemical profiles, which could be caused by disequilibrium processes -- such as photo-chemistry -- or the presence of clouds/hazes. The 2-layer retrieval could also help to constrain the composition of clouds and hazes by exploring the correlation between the chemical changes in the gaseous phase and the pressure at which the condensed phase occurs. The 2-layer retrieval presented here therefore represents an important step forward in our ability to constrain theoretical chemical models and cloud/haze composition from the analysis of future observations., Comment: 19 pages, 17 figures, Accepted in ApJ