Author: "Bruschi, Stefania" / Database: OpenAIRE - Searchworks@Jio Institute Digital Library Search Results

1. Investigation of surface finish and chip morphology in cryogenic machining biomedical grade polyetheretherketone

Author: Sajja, Nikhil Teja, Bertolini, Rachele, Ghiotti, Andrea, and Bruschi, Stefania
Subjects: Cryogenic Machining, PEEK, Surface Finish, Chip Morphology
Abstract: Polyetheretherketone (PEEK) is attracting the attention of the biomedical field, thanks to its high biocompatibility and wear resistance. Nevertheless, the attainment of good quality surfaces when machining PEEK is still challenging. In this framework, the aim of the paper is to investigate the viability of using cryogenic machining to enhance the surface finish of PEEK compared to the outcomes of dry cutting. To do that, turning trails were executed at varying cooling strategy and depth of cut, and the resultant surface finish and chip morphology were evaluated. The obtained results indicated that cryogenic machining carried out at the highest depth of cut greatly enhanced the PEEK machinability.
Published: 2023

2. Analytical modelling of residual stresses in sheet metal tension-levelling

Author: Magro, Tommaso, Simonetto, Enrico, Bruschi, Stefania, Ghiotti, Andrea, and Alessandro, Ferraiuolo
Published: 2019

3. Design and development of an ultrasonic vibration assisted turning system for machining bioabsorbable magnesium alloys

Author: Ghiotti, Andrea, Bruschi, Stefania, DI IORIO, Eugenio, and Bertolini, Rachele
Subjects: ultrasonic machining, surface texture, magnesium alloy
Published: 2018

4. Distortions of Thin-Wall Hot Forged Components in Stainless Steel

Author: Simonetto, Enrico, Bruschi, Stefania, and Ghiotti, Andrea
Published: 2018

5. Machining Simulation of Ti6Al4V under Dry and Cryogenic Conditions

Author: Imbrogno, Stano, Sartori, Stefano, Bordin, Alberto, Bruschi, Stefania, and Umbrello, Domenico
Subjects: Control and Systems Engineering, Cryogenic, Ti6Al4V, Finite Element Modeling, Machining, Industrial and Manufacturing Engineering
Published: 2017

6. Investigation on the hot bending of 22MnB5 tubes

Author: Simonetto, Enrico, Ghiotti, Andrea, and Bruschi, Stefania
Published: 2017

7. Effects of Phase Transformation in Hot Stamping of 22MnB5 High Strength Steel

Author: Venturato, Giulia, Novella, Michele, Bruschi, Stefania, Ghiotti, Andrea, and Shivpuri, Rajiv
Subjects: phase transformation, Engineering (all), 22MnB5, martensite, hot stamping, austenite
Published: 2017

8. Real time springback monitoring in tube bending processes

Author: Simonetto, Enrico, Ghiotti, Andrea, and Bruschi, Stefania
Published: 2017

9. Modelling the Thermo-mechanical Behavior of a Redesigned Tool Holder to Reduce the Component Geometrical Deviations in Cryogenic Machining

Author: Novella, Michele F., Sartori, Stefano, Bellin, Marco, Ghiotti, Andrea, and Bruschi, Stefania
Subjects: Control and Systems Engineering, cryogenic machining, geometrical distortion, thermal model, Ti6Al4V, Industrial and Manufacturing Engineering
Published: 2017

10. On the Fracture Characterization in Double-Sided Incremental Forming of Ti6Al4V Sheets at Elevated Temperatures

Author: Valoppi, Beatrice, Zhang, Zixuan, Deng, Muyang, Ghiotti, Andrea, Bruschi, Stefania, Ehmann, Kornel F., and Cao, Jian
Subjects: Double-Sided Incremental Sheet Forming, Fracture, Electrically-assisted, Artificial Intelligence, Ti6Al4V, Industrial and Manufacturing Engineering
Published: 2017

11. The Influence of Material Properties on the Tool Crater Wear When Machining Ti6Al4 v Produced by Additive Manufacturing Technologies

Author: Sartori, Stefano, Bordin, Alberto, Moro, Lorenzo, Ghiotti, Andrea, and Bruschi, Stefania
Subjects: Machinability, Wear, Control and Systems Engineering, Ti6Al4 V alloy, Cryogenic machining, Microstructure, Industrial and Manufacturing Engineering
Published: 2016

12. Comparison between EBM and DMLS Ti6Al4V machinability characteristics under dry micro-milling conditions

Author: Rysava, Zdenka and Bruschi, Stefania
Subjects: Surface integrity, Additive manufacturing, Mechanics of Materials, Micro-machinability, Mechanical Engineering, Micro-milling, Titanium alloys, Materials Science (all), Condensed Matter Physics
Published: 2016

13. Fretting Corrosion Behavior of Additive Manufactured and Cryogenic-Machined Ti6Al4V for Biomedical Applications

Author: Bertolini, Rachele, Bruschi, Stefania, Bordin, Alberto, Ghiotti, Andrea, Pezzato, Luca, and Dabala', Manuele
Subjects: Materials Science (all), Condensed Matter Physics
Published: 2016

14. Numerical Modelling of AlSi7 tubular components flowformed at elevated temperature

Author: Novella, MICHELE FRANCESCO, Ghiotti, Andrea, Bruschi, Stefania, and Capuzzo, Riccardo
Subjects: Sensitivity Analysis, Hot Metal Forming, Mechanics of Materials, Flowforming, Mechanical Engineering, Finite Element, Materials Science (all)
Published: 2016

15. Analysis of the Surface Integrity in Cryogenic Turning of Ti6Al4 v Produced by Direct Melting Laser Sintering

Author: Sartori, Stefano, Bordin, Alberto, Ghiotti, Andrea, and Bruschi, Stefania
Subjects: Surface integrity, Machinability, Control and Systems Engineering, Additive Manufacturing, Liquid Nitrogen, Ti6Al4 V, Industrial and Manufacturing Engineering
Published: 2016

16. Investigation on the mechanical properties and formability of Ti3Al2.5V tubes deformed at elevated temperatures

Author: Simonetto, Enrico, Venturato, Giulia, Bruschi, Stefania, and Ghiotti, Andrea
Subjects: High Temperature, Mechanics of Materials, Mechanical Engineering, Formability, High Temperature, Tubes Forming, Ti3Al2.5V, Materials Science (all), Tubes Forming
Published: 2016

17. Analysis of X20Cr13 turbine blades distortions at elevated temperatures

Author: Simonetto, Enrico, Bruschi, Stefania, Ghiotti, Andrea, Savio, Enrico, and Salvadori, Alessandro
Published: 2015

18. Formability of AA6060 tubes in hot metal gas forming at high temperatures

Author: Michieletto, Francesco, Ghiotti, Andrea, and Bruschi, Stefania
Subjects: Hot metal gas forming, Mechanics of Materials, Mechanical Engineering, Hot deformation, Metal forming, Materials Science (all)
Published: 2015

19. Effects of thermal parameters on the mechanical characteristics of Ti6Al4V sheets deformed at elevated temperatures

Author: Valoppi, Beatrice, Bruschi, Stefania, and Ghiotti, Andrea
Subjects: Fracture, Mechanics of Materials, Mechanical Engineering, Anisotropy, Micro-hardness, Microstructure, Thermal parameters, Ti6Al4V, Materials Science (all)
Published: 2015

20. Tribological behaviour of lubricants in hot stamping of AA6016

Author: Medea, Francesco, Ghiotti, Andrea, and Bruschi, Stefania
Subjects: Lubricant, Mechanics of Materials, Mechanical Engineering, Aluminium, Hot stamping, Materials Science (all)
Published: 2015

21. Investigation of Electro-Plastic Effect on Ferritic Stainless Steel AISI 430

Author: Spezzapria, Mattia, Beridze, E., Breda, Marco, Bruschi, Stefania, Calliari, Irene, Gennari, C., Forzan, Michele, and Michieletto, Francesco
Subjects: Electroplastic Effect, Ferritic Stainless Steel, Metal Forming, Electrically Assisted Manufacturing, Electroplastic Effect, Metal Forming, Ferritic Stainless Steel, Electrically Assisted Manufacturing
Published: 2015

22. Feasibility analysis of lubrication through magneto-rheological fluids in sheet metal forming processes

Author: Medea, Francesco, Ghiotti, Andrea, and Bruschi, Stefania
Subjects: Magneto-rheological fluids, Friction, Mechanics of Materials, Materials Science (all), Mechanical Engineering
Published: 2015

23. Feasibility of motion-capture techniques applied to tube bending

Author: Simonetto, Enrico, Ghiotti, Andrea, and Bruschi, Stefania
Subjects: Motion capture, Sheet metal forming, Springback, Tube bending, Materials Science (all), Mechanics of Materials, Mechanical Engineering
Published: 2015

24. Finite element simulation of semi-finishing turning of Electron Beam Melted Ti6Al4V under dry and cryogenic cooling

Author: Bordin, Alberto, Imbrogno, S., Rotella, G., Bruschi, Stefania, Ghiotti, Andrea, and Umbrello, D.
Subjects: Additive Manufacturing, Finite Element Method (FEM), Machining, Control and Systems Engineering, Industrial and Manufacturing Engineering
Published: 2015

25. Numerical modelling of orthogonal cutting of Electron Beam Melted Ti6Al4V

Author: Bordin, Alberto, Imbrogno, Stano, Bruschi, Stefania, Ghiotti, Andrea, and Umbrello, Domenico
Subjects: EBM, Finite element analysis, Orthogonal cutting, Ti6Al4V, Materials Science (all), Mechanics of Materials, Mechanical Engineering
Published: 2015

26. Machinability of the EBM Ti6Al4V in cryogenic turning

Author: Sartori, Stefano, Bordin, Alberto, Bruschi, Stefania, and Ghiotti, Andrea
Subjects: Fracture, Mechanics of Materials, Mechanical Engineering, Anisotropy, Micro-hardness, Microstructure, Thermal parameters, Ti6Al4V, Materials Science (all)
Published: 2015

27. Formability Characteristics of Hot Stamped Ti6Al4V Sheets Electro-Chemically Modified on Surface for Biomedical Applications

Author: Valoppi, Beatrice, Bruschi, Stefania, and Ghiotti, Andrea
Subjects: Surface modification, Mechanics of Materials, Mechanical Engineering, Hot stamping, Ti6Al4V, Materials Science (all)
Published: 2015

28. Influence of temperature and deformation on phase transformation and vickers hardness in tailored tempering process: Numerical and experimental verifications

Author: Tang, B. T, Wang, Q. L., Bruschi, Stefania, Ghiotti, Andrea, and Bariani, PAOLO FRANCESCO
Subjects: Control and Systems Engineering, Industrial and Manufacturing Engineering, Mechanical Engineering
Published: 2014

29. Novel wear testing apparatus to investigate the reciprocating sliding wear in sheet metal forming at elevated temperatures

Author: Ghiotti, Andrea, Bruschi, Stefania, Sgarabotto, F., and Medea, Francesco
Published: 2014

30. Shear surface control in blanking by adaptronic systems

Author: Ghiotti, Andrea, Bruschi, Stefania, and Regazzo, P.
Published: 2014

31. Machinability characteristics of wrought and EBM CoCrMo alloys

Author: Bordin, Alberto, Ghiotti, Andrea, Bruschi, Stefania, Facchini, L., and Bucciotti, F.
Subjects: Machinability, Turning, Control and Systems Engineering, CoCrMo, Electron Beam Melting, Tool wear, Industrial and Manufacturing Engineering
Published: 2014

32. Novel Experimental Set-Up to Test Tubes Formability at Elevated Temperatures

Author: Michieletto, Francesco, Ghiotti, Andrea, and Bruschi, Stefania
Subjects: hot gas forming, tube forming, AA6060, formability
Published: 2014

33. The effect of cutting speed and feed rate on the surface integrity in dry turning of CoCrMo alloy

Author: Bordin, Alberto, Bruschi, Stefania, and Ghiotti, Andrea
Published: 2014

34. Numerical simulation of an U-channel component tailored tempering process considering the effect of stress on the shift of TTT curves

Author: Tang, B. T., Wang, Q. L., and Bruschi, Stefania
Published: 2014

35. Comparison between wrought and EBM Ti6Al4V machinability characteristics

Author: Bordin, Alberto, Bruschi, Stefania, Ghiotti, Andrea, Bucciotti, F., and Facchini, L.
Published: 2014

36. Effect of solubilisation on the high-temperature formability of AA6016 sheets

Author: Bariani, PAOLO FRANCESCO, Bruschi, Stefania, Ghiotti, Andrea, and Michieletto, Francesco
Subjects: Control and Systems Engineering, Aluminum Alloy, Hot stamping, Solubilisation, Industrial and Manufacturing Engineering
Published: 2014

37. Surface and Microstructure Considerations in High Speed Single Point Incremental Forming of Ti6Al4V Sheets

Author: Giuseppina, Ambrogio, Bruschi, Stefania, Francesco, Gagliardi, Ghiotti, Andrea, and Luigino, Filice
Subjects: High Speed, Incremental Sheet Forming, Titanium alloys
Published: 2014

38. Phase Transformation and Microstructural Behavior of New Steel Grades for Hot Sheet Stamping

Author: Bruschi, Stefania, Ghiotti, Andrea, Beatrice, Valoppi, Juan David Puerta Velasquez, Pascal, Drillet, Maribel, Arribas, Inigo, Aranguren, and Joerg, Clobes
Subjects: high strength steel, hot stamping, Phase transformation kinetics, Martensite, auto- tempering
Published: 2014