Search

In radiation therapy, x-ray dose must be precisely sculpted to the tumor, while simultaneously avoiding surrounding organs at risk. This requires modulation of x-ray intensity in space and/or time. Typically, this is achieved using a multi leaf collimator (MLC)-a complex mechatronic device comprising over one hundred individually powered tungsten 'leaves' that move in or out of the radiation field as required. Here, an all-electronic x-ray collimation concept with no moving parts is presented, termed "SPHINX": Scanning Pencil-beam High-speed Intensity-modulated X-ray source. SPHINX utilizes a spatially distributed bremsstrahlung target and collimator array in conjunction with magnetic scanning of a high energy electron beam to generate a plurality of small x-ray "beamlets."A simulation framework was developed in Topas Monte Carlo incorporating a phase space electron source, transport through user defined magnetic fields, bremsstrahlung x-ray production, transport through a SPHINX collimator, and dose in water. This framework was completely parametric, meaning a simulation could be built and run for any supplied geometric parameters. This functionality was coupled with Bayesian optimization to find the best parameter set based on an objective function which included terms to maximize dose rate for a user defined beamlet width while constraining inter-channel cross talk and electron contamination. Designs for beamlet widths of 5, 7, and 10 mmThe optimized 5-, 7-, and 10-mm models had beamlet widths of 5.1 , 7.2 , and 10.1 mmBayesian optimization was coupled with Monte Carlo modeling to generate SPHINX geometries for various beamlet widths. A complete Monte Carlo simulation for one of these designs was developed, including electron beam transport of all beamlets through scanning magnets, x-ray production and collimation, and dose in water. These results demonstrate that SPHINX is a promising candidate for sculpting radiation dose with no moving parts, and has the potential to vastly improve both the speed and robustness of radiotherapy delivery. A multi-beam SPHINX system may be a candidate for delivering magavoltage FLASH RT in humans.

MRI can help to categorize tissues as malignant or non-malignant both anatomically and functionally, with a high level of spatial and temporal resolution. This non-invasive imaging modality has been integrated with radiotherapy in devices that can differentially target the most aggressive and resistant regions of tumours. The past decade has seen the clinical deployment of treatment devices that combine imaging with targeted irradiation, making the aspiration of integrated MRI-guided radiotherapy (MRIgRT) a reality. The two main clinical drivers for the adoption of MRIgRT are the ability to image anatomical changes that occur before and during treatment in order to adapt the treatment approach, and to image and target the biological features of each tumour. Using motion management and biological targeting, the radiation dose delivered to the tumour can be adjusted during treatment to improve the probability of tumour control, while simultaneously reducing the radiation delivered to non-malignant tissues, thereby reducing the risk of treatment-related toxicities. The benefits of this approach are expected to increase survival and quality of life. In this Review, we describe the current state of MRIgRT, and the opportunities and challenges of this new radiotherapy approach.In the past decade, treatment devices that combine imaging with targeted irradiation have been developed to deliver MRI-guided radiotherapy (MRIgRT). This treatment modality uses motion management and biological targeting to improve local control rates whilst reducing the radiation delivered to non-malignant tissues. The authors of this Review describe the current state of MRIgRT, and the opportunities and challenges of this radiotherapy approach.

Background New technologies developed to improve survival outcomes for glioblastoma (GBM) continue to have limited success. Recently, image-guided dose painting (DP) radiotherapy has emerged as a promising strategy to increase local control rates. In this study, we evaluate the practical application of a multiparametric MRI model of glioma infiltration for DP radiotherapy in GBM by measuring its conformity, feasibility, and expected clinical benefits against standard of care treatment. Methods Maps of tumor probability were generated from perfusion/diffusion MRI data from 17 GBM patients via a previously developed model of GBM infiltration. Prescriptions for DP were linearly derived from tumor probability maps and used to develop dose optimized treatment plans. Conformity of DP plans to dose prescriptions was measured via a quality factor. Feasibility of DP plans was evaluated by dose metrics to target volumes and critical brain structures. Expected clinical benefit of DP plans was assessed by tumor control probability. The DP plans were compared to standard radiotherapy plans. Results The conformity of the DP plans was >90%. Compared to the standard plans, DP (1) did not affect dose delivered to organs at risk; (2) increased mean and maximum dose and improved minimum dose coverage for the target volumes; (3) reduced minimum dose within the radiotherapy treatment margins; (4) improved local tumor control probability within the target volumes for all patients. Conclusions A multiparametric MRI model of GBM infiltration can enable conformal, feasible, and potentially beneficial dose painting radiotherapy plans.

Purpose: An important factor when considering the use of interventional cone beam computed tomography (CBCT) imaging during cardiac procedures is the trade-off between imaging dose and image quality. Accordingly, Adaptive CaRdiac cOne BEAm computed Tomography (ACROBEAT) presents an alternative acquisition method, adapting the gantry velocity and projection rate of CBCT imaging systems in accordance with a patient's electrocardiogram (ECG) signal in real-time. The aim of this study was to experimentally investigate that ACROBEAT acquisitions deliver improved image quality compared to conventional cardiac CBCT imaging protocols with fewer projections acquired. Methods: The Siemens ARTIS pheno (Siemens Healthcare, GmbH, Germany), a robotic CBCT C-arm system, was used to compare ACROBEAT with a commercially available conventional cardiac imaging protocol that utilizes multisweep retrospective ECG-gated acquisition. For ACROBEAT, real-time control of the gantry position was enabled through the Siemens Test Automation Control system. ACROBEAT and conventional image acquisitions of the CIRS Dynamic Cardiac Phantom were performed, using five patient-measured ECG traces. The traces had average heart rates of 56, 64, 76, 86, and 100 bpm. The total number of acquired projections was compared between the ACROBEAT and conventional acquisition methods. The image quality was assessed via the contrast-to-noise ratio (CNR), structural similarity index (SSIM), and root-mean square error (RMSE). Results: Compared to the conventional protocol, ACROBEAT reduced the total number of projections acquired by 90%. The visual image quality provided by the ACROBEAT acquisitions, across all traces, matched or improved compared to conventional acquisition and was independent of the patient's heart rate. Across all traces, ACROBEAT averaged 1.4 times increase in the CNR, a 23% increase in the SSIM and a 29% decrease in the RMSE compared to conventional and was independent of the patient's heart rate. Conclusion: Adaptive patient imaging is feasible on a clinical robotic CBCT system, delivering higher quality images while reducing the number of projections acquired by 90% compared to conventional cardiac imaging protocols.

Purpose: Interventional treatments of aneurysms in the carotid artery are increasingly being supplemented with three-dimensional (3D) x-ray imaging. The 3D imaging provides additional information on device sizing and stent malapposition during the procedure. Standard 3D x-ray image acquisition is a one-size fits all model, exposing patients to additional radiation and results in images that may have cardiac-induced motion blur around the artery. Here, we investigate the potential of a novel dynamic imaging technique Adaptive CaRdiac cOne BEAm computed Tomography (ACROBEAT) to personalize image acquisition by adapting the gantry velocity and projection rate in real-time to changes in the patient's electrocardiogram (ECG) trace. Methods: We compared the total number of projections acquired, estimated carotid artery widths and image quality between ACROBEAT and conventional (single rotation fixed gantry velocity and acquisition rate, no ECG-gating) scans in a simulation study and a proof-of-concept physical phantom experimental study. The simulation study dataset consisted of an XCAT digital software phantom programmed with five patient-measured ECG traces and artery motion curves. The ECG traces had average heart rates of 56, 64, 76, 86, and 100 bpm. To validate the concept experimentally, we designed and manufactured the physical phantom from an 8-mm diameter silicon rubber tubing cast into Phytagel. An artery motion curve and the ECG trace with an average heart rate of 56 bpm was passed through the phantom. To implement ACROBEAT on the Siemens ARTIS pheno angiography system for the proof-of-concept experimental study, the Siemens Test Automation Control System was used. The total number of projections acquired and estimated carotid artery widths were compared between the ACROBEAT and conventional scans. As the ground truth was available for the simulation studies, the image quality metrics of Root Mean Square Error (RMSE) and Structural Similarity Index (SSIM) were also utilized to assess image quality. Results: In the simulation study, on average, ACROBEAT reduced the number of projections acquired by 63%, reduced carotid width estimation error by 65%, reduced RMSE by 11% and improved SSIM by 27% compared to conventional scans. In the proof-of-concept experimental study, ACROBEAT enabled a 60% reduction in the number of projections acquired and reduced carotid width estimation error by 69% compared to a conventional scan. Conclusion: A simulation and proof-of-concept experimental study was completed applying a novel dynamic imaging protocol, ACROBEAT, to imaging the carotid artery. The ACROBEAT results showed significantly improved image quality with fewer projections, offering potential applications to intracranial interventional procedures negatively affected by cardiac motion.

Purpose The American Association of Physicists in Medicine (AAPM) previously developed a research database consisting of the National Institutes of Health (NIH) grants that were awarded to its members. The purpose of this report is to classify these NIH grants into various medical physics subdisciplines and analyze the scope of AAPM member research. Methods For this report, an algorithm classified grant topics into medical physics research subdisciplines (grants from 2002 to 2019 were analyzed). This algorithm utilized a search for common words and phrases within grant titles, keywords, abstracts, and activity codes to perform the classification. AAPM member grants were compared with non-AAPM member grants in various relevant subcategories to assess what percentage of these grants was held by AAPM members. Results The percentage of AAPM member grants that included words relating to both imaging and therapy (image-guided therapy grants) increased from 13% (27/207) in 2002 to 27% (79/293) in 2019. The percentage of AAPM member grants utilizing words relating to artificial intelligence increased from 8% in 2002 to 20% in 2019. From 2002 to 2019, AAPM member grants referenced cancer more than all other diseases combined. The majority of AAPM member grants included words relating to clinical research (81% of grants in 2002 and 99% in 2019). When comparing AAPM member with non-AAPM member grants it was found that in 2019 AAPM members held a substantial fraction of all NIH grants that referenced stereotactic radiation therapies (41%), radionuclide therapies (10%), brachytherapies (35%), intensity-modulated radiation therapies (45%), and external beam particle therapies (55%). From 2002 to 2019, the percentage of AAPM membership holding NIH grants decreased for males (3.2% down to 2.3%) and increased for females (0.8% up to 1.3%) CONCLUSIONS: The majority of grants awarded to AAPM members focus on clinical research, which underlies the translational aspect of medical physics and suggests medical physicists are uniquely positioned to help translate new technologies such as artificial intelligence into the clinic. Since 2002, NIH grants awarded to AAPM members have increasingly referenced some form of image-guided therapy, suggesting opportunities for continued innovation of imaging technologies. A substantial fraction of all radiotherapy-related research grants were awarded to AAPM members, emphasizing the important role physicists have in developing radiotherapy-related treatments.

Purpose: Unique characteristics of MRI-linac systems and mutual interactions between their components pose specific challenges for their commissioning and quality assurance. The Australian MRI-linac is a prototype system which explores the inline orientation, with radiation beam parallel to the main magnetic field. The aim of this work was to commission the radiation-related aspects of this system for its application in clinical treatments. Methods: Physical alignment of the radiation beam to the magnetic field was fine-tuned and magnetic shielding of the radiation head was designed to achieve optimal beam characteristics. These steps were guided by investigative measurements of the beam properties. Subsequently, machine performance was benchmarked against the requirements of the IEC60976/77 standards. Finally, the geometric and dosimetric data was acquired, following the AAPM Task Group 106 recommendations, to characterize the beam for modelling in the treatment planning system and with Monte Carlo simulations. The magnetic field effects on the dose deposition and on the detector response have been taken into account and issues specific to the inline design have been highlighted. Results: Alignment of the radiation beam axis and the imaging isocentre within 2 mm tolerance was obtained. The system was commissioned at two source-to-isocentre distances (SIDs): 2.4 m and 1.8 m. Reproducibility and proportionality of the dose monitoring system met IEC criteria at the larger SID but slightly exceeded it at the shorter SID. Profile symmetry remained under 103% for the fields up to ca. 34×34 cm2 and 21×21 cm2 at the larger and shorter SID respectively. No penumbra asymmetry, characteristic for transverse systems, was observed. The electron focusing effect, which results in high entrance doses on central axis, was quantified and methods to minimize it have been investigated. Conclusion: Methods were developed and employed to investigate and quantify the dosimetric properties of an inline MRI-Linac system. The Australian MRI-linac system has been fine-tuned in terms of beam properties and commissioned, constituting a key step towards the application of inline MRI-linacs for patient treatments.

The desire to utilise soft-tissue image guidance at the time of radiation treatment has led to the development of several hybrid magnetic resonance imaging (MRI) linear accelerators (linacs). These systems have the potential to realise the benefits of MRI on the treatment table with the ability of real-time motion management and adaption on a patient-specific basis. There are several MRI-linacs currently being implemented covering both low and high magnetic field strength and two beam-field orientations. Clinical trials have only recently begun with this technology, but their future use as standard radiotherapy practice seems assured. This review article summarises the challenges faced in developing such hybrid technology, the differences and advantages of each of the currently exploited solutions, and their current status.

Introduction Patient rotation could greatly simplify radiation therapy delivery, with particularly important ramifications for fixed beam treatment with protons, heavy ions, MRI-Linacs, and low cost Linacs. Patient tolerance is often cited as a barrier to widespread implementation to patient rotation; however, no quantitative data addressing this issue exists. In this study, patient reported experiences of slow, single arc rotation in upright (sitting) and lying orientations are reported. Methods Fifteen patients currently or previously treated for cancer were slowly (~2 rpm) rotated in upright and lying orientations using an existing medical device. Patients were rotated 360° in 45° increments. Rotation was paused for 30 seconds at each angle to simulate beam delivery. Claustrophobia, anxiety and motion sickness were monitored via validated questionnaires. The Wilcoxon signed rank test was used to test for significant differences in anxiety and motion sickness before, during and after the study. Results No significant differences in anxiety or motion sickness were found between before and after the study, or upright and lying rotation (P > 0.05). The median percentage scores for anxiety and motion sickness immediately following the study were both 0. In general, anxiety and motion sickness scores were low throughout the study. All patients except one completed the study. Conclusions Slow, single arc rotation in upright and lying orientations was well tolerated in this study. These results support the need for further studies into the clinical implementation of patient rotation, which could have a major impact on the practice and cost of radiotherapy.

This chapter describes magnetic resonance imaging-linear accelerator (MRI-Linac) systems, focusing on the challenges of integrating MRI and linacs that are common to all current and future MRI-Linac systems. The four MRI-Linac systems in existence at the time of writing are reviewed and compared. Predictions of the future of MRI-Linacs and their potential are made.

Purpose MRI-linac therapy is a rapidly growing field, and requires that conventional linear accelerators are operated with the fringe field of MRI magnets. One of the most sensitive accelerator components is the electron gun, which serves as the source of the beam. The purpose of this work was to develop a validated finite element model (FEM) model of a clinical triode (or gridded) electron gun, based on accurate geometric and electrical measurements, and to characterize the performance of this gun in magnetic fields. Methods The geometry of a Varian electron gun was measured using 3D laser scanning and digital calipers. The electric potentials and emission current of these guns were measured directly from six dose matched true beam linacs for the 6X, 10X, and 15X modes of operation. Based on these measurements, a finite element model (FEM) of the gun was developed using the commercial software opera/scala. The performance of the FEM model in magnetic fields was characterized using parallel fields ranging from 0 to 200 G in the in-line direction, and 0–35 G in the perpendicular direction. Results The FEM model matched the average measured emission current to within 5% across all three modes of operation. Different high voltage settings are used for the different modes; the 6X, 10X, and 15X modes have an average high voltage setting of 15, 10, and 11 kV. Due to these differences, different operating modes show different sensitivities in magnetic fields. For in line fields, the first current loss occurs at 40, 20, and 30 G for each mode. This is a much greater sensitivity than has previously been observed. For perpendicular fields, first beam loss occurred at 8, 5, and 5 G and total beam loss at 27, 22, and 20 G. Conclusions A validated FEM model of a clinical triode electron gun has been developed based on accurate geometric and electrical measurements. Three different operating modes were simulated, with a maximum mean error of 5%. This gun shows greater sensitivity to in-line magnetic fields than previously presented models, and different operating modes show different sensitivity.

Purpose: The purpose of this article is to present the first imaging experiments to demonstrate the functional equivalence between a conventional rotational gantry and a fixed-beam imaging geometry, and the feasibility of an iterative image-reconstruction technique under gravitational deformation. Methods and materials: Experiments were performed using an Elekta Axesse with Agility MLC and XVI, a custom-built rotating phantom stage, a Catphan QA phantom, and a porcine heart. For the imaging equivalence, a conventional cone beam computed tomography (CBCT) of the Catphan was acquired, as well as a set of 660 x-ray projections with a static gantry and rotating Catphan. Both datasets were reconstructed with the Feldkamp-Davis-Kress (FDK) algorithm, and the resultant volumetric images were compared using standard metrics. For imaging under gravitational deformation, a conventional CBCT of the Catphan and a set of 660 x-ray projections with a static gantry and rotating Catphan were also acquired with a porcine heart. The conventional CBCT was reconstructed using FDK. The projections that were acquired with the heart rotating were sorted into angular bins and reconstructed with prior image constrained compressed sensing using a deformation-blurred FDK prior. Deformation was quantified with B-spline transformation-based deformable image registration. Results: For imaging equivalence, the difference between the two Catphan images was consistent with Poisson noise. For imaging under gravitational deformation, the conventional CBCT porcine heart image (ground truth at 0 degrees) matched the static gantry, rotating heart reconstruction with a mean magnitude of

Passive magnetic shielding refers to the use of ferromagnetic materials to redirect magnetic field lines away from vulnerable regions. An application of particular interest to the medical physics community is shielding in MRI systems, especially integrated MRI-linear accelerator (MRI-Linac) systems. In these systems, the goal is not only to minimize the magnetic field in some volume, but also to minimize the impact of the shield on the magnetic fields within the imaging volume of the MRI scanner. In this work, finite element modelling was used to assess the shielding of a side coupled 6 MV linac and resultant heterogeneity induced within the 30 cm diameter of spherical volume (DSV) of a novel 1 Tesla split bore MRI magnet. A number of different shield parameters were investigated; distance between shield and magnet, shield shape, shield thickness, shield length, openings in the shield, number of concentric layers, spacing between each layer, and shield material. Both the in-line and perpendicular MRI-Linac configurations were studied. By modifying the shield shape around the linac from the starting design of an open ended cylinder, the shielding effect was boosted by approximately 70% whilst the impact on the magnet was simultaneously reduced by approximately 10%. Openings in the shield for the RF port and beam exit were substantial sources of field leakage; however it was demonstrated that shielding could be added around these openings to compensate for this leakage. Layering multiple concentric shield shells was highly effective in the perpendicular configuration, but less so for the in-line configuration. Cautious use of high permeability materials such as Mu-metal can greatly increase the shielding performance in some scenarios. In the perpendicular configuration, magnetic shielding was more effective and the impact on the magnet lower compared with the in-line configuration.

High precision conformal radiotherapy requires sophisticated imaging techniques to aid in target localisation for planning and treatment, particularly when organ motion due to respiration is involved. X-ray based imaging is a well-established standard for radiotherapy treatments. Over the last few years, the ability of magnetic resonance imaging (MRI) to provide radiation-free images with high-resolution and superb soft tissue contrast has highlighted the potential of this imaging modality for radiotherapy treatment planning and motion management. In addition, these advantageous properties motivated several recent developments towards combined MRI radiation therapy treatment units, enabling in-room MRI-guidance and treatment adaptation. The aim of this review is to provide an overview of the state-of-the-art in MRI-based image guidance for organ motion management in external beam radiotherapy. Methodological aspects of MRI for organ motion management are reviewed and their application in treatment planning, in-room guidance and adaptive radiotherapy described. Finally, a roadmap for an optimal use of MRI-guidance is highlighted and future challenges are discussed.

Derived from 2 yr of deliberations and community engagement, Medical Physics 3.0 (MP3.0) is an effort commissioned by the American Association of Physicists in Medicine (AAPM) to devise a framework of strategies by which medical physicists can maintain and improve their integral roles in, and contributions to, health care and its innovation under conditions of rapid change and uncertainty. Toward that goal, MP3.0 advocates a broadened and refreshed model of sustainable excellence by which medical physicists can and should contribute to health care. The overarching conviction of MP3.0 is that every healthcare facility can benefit from medical physics and every patient's care can be improved by a medical physicist. This large and expansive challenge necessitates a range of strategies specific to each area of medical physics: clinical practice, research, product development, and education. The present paper offers a summary of the Phase 1 deliberations of the MP3.0 initiative pertaining to strategic directions of the discipline primarily but not exclusively oriented toward the clinical practice of medical physics in the United States.

To quantify the dose calculation error and resulting optimization uncertainty caused by performing inverse treatment planning on inaccurate electron density data (pseudo-CT) as needed for adaptive radiotherapy and Magnetic Resonance Imaging (MRI) based treatment planning. Planning Computer Tomography (CT) data from 10 cervix cancer patients was used to generate 4 pseudo-CT data sets. Each pseudo-CT was created based on an available method of assigning electron density to an anatomic image. An inversely modulated radiotherapy (IMRT) plan was developed on each planning CT. The dose calculation error caused by each pseudo-CT data set was quantified by comparing the dose calculated each pseudo-CT data set with that calculated on the original planning CT for the same IMRT plan. The optimization uncertainty introduced by the dose calculation error was quantified by re-optimizing the same optimization parameters on each pseudo-CT data set and comparing against the original planning CT. Dose differences were quantified by assessing the Equivalent Uniform Dose (EUD) for targets and relevant organs at risk. Across all pseudo-CT data sets and all organs, the absolute mean dose calculation error was 0.2 Gy, and was within 2 % of the prescription dose in 98.5 % of cases. Then absolute mean optimisation error was 0.3 Gy EUD, indicating that that inverse optimisation is impacted by the dose calculation error. However, the additional uncertainty introduced to plan optimisation is small compared the sources of variation which already exist. Use of inaccurate electron density data for inverse treatment planning results in a dose calculation error, which in turn introduces additional uncertainty into the plan optimization process. In this study, we showed that both of these effects are clinically acceptable for cervix cancer patients using four different pseudo-CT data sets. Dose calculation and inverse optimization on pseudo-CT is feasible for this patient cohort.

INTRODUCTION: In-room MRI is a promising image guidance strategy in external beam radiotherapy to acquire volumetric information for moving targets. However, limitations in spatio-temporal resolution led several authors to use 2D orthogonal images for guidance. The aim of this work is to present a method to concurrently compensate for non-rigid tumour motion and provide an approach for 3D reconstruction from 2D orthogonal cine-MRI slices for MRI-guided treatments. METHODS: Free-breathing sagittal/coronal interleaved 2D cine-MRI were acquired in addition to a pre-treatment 3D volume in two patients. We performed deformable image registration (DIR) between cine-MRI slices and corresponding slices in the pre-treatment 3D volume. Based on an extrapolation of the interleaved 2D motion fields, the 3D motion field was estimated and used to warp the pre-treatment volume. Due to the lack of a ground truth for patients, the method was validated on a digital 4D lung phantom. RESULTS: On the phantom, the 3D reconstruction method was able to compensate for tumour motion and compared favourably to the results of previously adopted strategies. The difference in the 3D motion fields between the phantom and the extrapolated motion was 0.4 ± 0.3 mm for tumour and 0.8 ± 1.5 mm for whole anatomy, demonstrating feasibility of performing a 3D volumetric reconstruction directly from 2D orthogonal cine-MRI slices. Application of the method to patient data confirmed the feasibility of utilizing this method in real world scenarios. CONCLUSION: Preliminary results on phantom and patient cases confirm the feasibility of the proposed approach in an MRI-guided scenario, especially for non-rigid tumour motion compensation.

Purpose: A sensitivity analysis of the effect of variations in electron density data (ED) on dose calculation accuracy for MRI based cervical cancertreatment planning.Methods: Five cervical cancer patients were analysed in this work. Planning CT scans represented gold standard ED data. Standard four field 3DCRT plans (prescription 45Gy) were designed on these CT scans. The CT data was then manipulated to simulate the following methods of assigning ED to MRI; (1) homogenous bulk density corrections, (2) Bulk density correction to bones, (3) rigid image registration of CT to MR, and (4) regression analysis based pseudo CT. Plans were then generated on the manipulated data sets, and compared to the plans generated on the original. Dose was analysed using Chi analysis and equivalent uniform dose (EUD). Data was analysed to quantify (A) the effect on plan design (called optimisation error), and (B) the effect on dose calculation accuracy (systematic error). Results:Analysis of the averaged patient results showed that for 3DCRT, the use of imperfect electron density data had minimal impact on plan design for all tested data sets.Analysis of systematic error showed minimal errors for cases (1), (2) and (3), where average errors of less than 0.3 Gy in EUD were recorded and Chi analysis showed that over 95% of points within the high dose region (D>36Gy) were within 2% or 2mm of the original dose. For case (4), errors greater than .5 Gy in EUD were recorded; these were not considered acceptable errors. Conclusions: Using imperfect electron density data for 3DCRT treatment planning for cervical cancer patients is feasible for appropriately considered choices of electron density assignment. Further analysis is needed to test this result for IMRT, and is ongoing.

PURPOSE: To produce and maintain a database of National Institutes of Health (NIH) funding of the American Association of Physicists in Medicine (AAPM) members, to perform a top‐level analysis of these data, and to make these data (hereafter referred to as the AAPM research database) available for the use of the AAPM and its members. METHODS: NIH‐funded research dating back to 1985 is available for public download through the NIH exporter website, and AAPM membership information dating back to 2002 was supplied by the AAPM. To link these two sources of data, a data mining algorithm was developed in Matlab. The false‐positive rate was manually estimated based on a random sample of 100 records, and the false‐negative rate was assessed by comparing against 99 member‐supplied PI _ ID numbers. The AAPM research database was queried to produce an analysis of trends and demographics in research funding dating from 2002 to 2015. RESULTS: A total of 566 PI _ ID numbers were matched to AAPM members. False‐positive and ‐negative rates were respectively 4% (95% CI: 1–10%, N = 100) and 10% (95% CI: 5–18%, N = 99). Based on analysis of the AAPM research database, in 2015 the NIH awarded $USD 110M to members of the AAPM. The four NIH institutes which historically awarded the most funding to AAPM members were the National Cancer Institute, National Institute of Biomedical Imaging and Bioengineering, National Heart Lung and Blood Institute, and National Institute of Neurological Disorders and Stroke. In 2015, over 85% of the total NIH research funding awarded to AAPM members was via these institutes, representing 1.1% of their combined budget. In the same year, 2.0% of AAPM members received NIH funding for a total of $116M, which is lower than the historic mean of $120M (in 2015 USD). CONCLUSIONS: A database of NIH‐funded research awarded to AAPM members has been developed and tested using a data mining approach, and a top‐level analysis of funding trends has been performed. Current funding of AAPM members is lower than the historic mean. The database will be maintained by members of the Working group for the development of a research database (WGDRD) on an annual basis, and is available to the AAPM, its committees, working groups, and members for download through the AAPM electronic content website. A wide range of questions regarding financial and demographic funding trends can be addressed by these data. This report has been approved for publication by the AAPM Science Council.

Purpose: MRI guided radiotherapy is a rapidly growing field; however, current electron accelerators are not designed to operate in the magnetic fringe fields of MRI scanners. As such, current MRI-Linac systems require magnetic shielding, which can degrade MR image quality and limit system flexibility. The purpose of this work was to develop and test a novel medical electron accelerator concept which is inherently robust to operation within magnetic fields for in-line MRI-Linac systems. Methods: Computational simulations were utilized to model the accelerator, including the thermionic emission process, the electromagnetic fields within the accelerating structure, and resulting particle trajectories through these fields. The spatial and energy characteristics of the electron beam were quantified at the accelerator target and compared to published data for conventional accelerators. The model was then coupled to the fields from a simulated 1 T superconducting magnet and solved for cathode to isocenter distances between 1.0 and 2.4 m; the impact on the electron beam was quantified. Results: For the zero field solution, the average current at the target was 146.3 mA, with a median energy of 5.8 MeV (interquartile spread of 0.1 MeV), and a spot size diameter of 1.5 mm full-width-tenth-maximum. Such an electron beam is suitable for therapy, comparing favorably to published data for conventional systems. The simulated accelerator showed increased robustness to operation in in-line magnetic fields, with a maximum current loss of 3% compared to 85% for a conventional system in the same magnetic fields. Conclusions: Computational simulations suggest that replacing conventional DCelectron sources with a RF based source could be used to develop medical electron accelerators which are robust to operation in in-line magnetic fields. This would enable the development of MRI-Linac systems with no magnetic shielding around the Linac and reduce the requirements for optimization of magnetic fringe field, simplify design of the high-field magnet, and increase system flexibility.

Purpose Conventionally in radiotherapy, a very heavy beam forming apparatus (gantry) is rotated around a patient. From a mechanical perspective, a more elegant approach is to rotate the patient within a stationary beam. Key obstacles to this approach are patient tolerance and anatomical deformation. Very little information on either aspect is available in the literature. The purpose of this work was therefore to design and test an MRI compatible patient rotation system such that the feasibility of a patient rotation workflow could be tested. Methods A patient rotation system (PRS) was designed to fit inside the bore of a 3T MRI scanner (Skyra, Siemens) such that 3D images could be acquired at different rotation angles. Once constructed, a pelvic imaging study was carried out on a healthy volunteer. T2 weighted MRI images were taken every 45⁰ between 0⁰ and 360⁰, (with 0⁰ equivalent to supine). The prostate, bladder, and rectum were segmented using atlas-based auto contouring. The images from each angle were registered back to the 0⁰ image in three steps: (1) Rigid registration was based on MRI visible markers on the couch. (2) Rigid registration based on the prostate contour (equivalent to a rigid shift to the prostate). (3) Non-rigid registration. The Dice similarity coefficient (DSC) and mean average surface distance (MASD) was calculated for each organ at each step. Results The PRS met all design constraints and was successfully integrated with the MRI scanner. Phantom images showed minimal difference in signal or noise with or without the PRS in the MRI scanner. For the MRI images the DSC (mean±standard deviation) over all angles in the prostate, rectum, and bladder was 0.60±0.11, 0.56±0.15, and 0.76±0.06 after rigid couch registration, 0.88±0.03, 0.81±0.08, and 0.86±0.03 after rigid prostate guided registration, and 0.85±0.03, 0.88±0.02, 0.87±0.02 after non-rigid registration. Conclusions An MRI compatible patient rotation system has been designed, constructed, and tested. A pelvic study was carried out on a healthy volunteer. Rigid registration based on the prostate contour yielded DSC overlap statistics in the prostate superior than interobserver contouring variability reported in the literature. This article is protected by copyright. All rights reserved.

Treatment planning studies often require the calculation of a large number of dose and radiobiological metrics. To streamline these calculations, a computer program called Comp Plan was developed using MATLAB. Comp Plan calculates common metrics, including equivalent uniform dose, tumor control probability, and normal tissue complication probability from dose-volume histogram data. The dose and radiobiological metrics can be calculated for the original data or for an adjusted fraction size using the linear quadratic model. A homogeneous boost dose can be added to a given structure if desired. The final output is written to an Excel file in a format convenient for further statistical analysis. Comp Plan was verified by independent calculations. A lung treatment planning study comparing 45 plans for 7 structures using up to 6 metrics for each structure was successfully analyzed within approximately 5 minutes with Comp Plan. The code is freely available from the authors on request.

To compare the Visual Analogue Scale (VAS) and the Verbal Numerical Rating Scale (VNRS), in the assessment of acute pain in the emergency department (ED). Furthermore, to determine the influence of demographics on this agreement and practical limitations of the scales.St Vincent's University Hospital, Dublin; a 479-bed teaching hospital; annual ED census 36,000 adult patients.A prospective observational study was conducted on ED patients with acute pain as a component of their presenting complaint. Eligible patients scored their pain on both VAS and VNRS within 1 hour of arrival. They rescored their pain every 30 minutes for 2 hours using both scales. The primary outcome measure was agreement between VAS and VNRS. Secondary outcomes were ease of pain scale use and effect of patient demographics on pain scores. Agreement between scores was evaluated using the Bland-Altman method.123 patients were included (median age 35; 43.9% male). There was a strong correlation between VAS and VNRS (rs=0.93). However, there was not perfect agreement between the two scales. Patient age (older age, p0.005, t=-4.448), gender (female sex, p0.005, t=4.903) and educational level attained (third level education, p0.005, t=5.575) had a statistically significant influence on the agreement between VAS and VNRS. There was a preference for VNRS in those patients who expressed a preference for one pain scale over the other.VAS and VNRS are not interchangeable in assessing an individual patient's pain over time in the ED setting. VNRS has practical advantages over VAS in this setting.

One part of the policy response in many countries to increasing pension coverage will be greater private provision on the part of individuals. This requires that individuals are well informed about pensions. In this article, we assess levels of knowledge of pensions using a representative sample of older Irish adults. We find that two-thirds of individuals enrolled in pension schemes do not know what amount will be paid out on retirement and/or whether the payments will be in the form of lump sums, monthly payments, or both. One policy implication is the need for increased information to be directed at certain groups, in particular, women and less educated people. More fundamentally, the results suggest that the mandatory elements in pension systems should be extended.

Up-to-date knowledge about federal funding opportunities related to medical physics research, as well as obtaining skills for writing effective grant proposals are critical for academic and entrepreneurial medical physicists. In this symposium, program directors from key federal research funding agencies, including the National Cancer Institute, the National Institute of Biomedical Imaging and Bioengineering, and the National Science Foundation, will present information about current funding opportunities relevant to the field of medical physics. They will also provide insight to issues that applicants should pay special attention to when crafting their research grant proposals. In addition, the symposium will include presentations on research funding for small business concerns, and the results of an independent AAPM study of the National Institutes of Health funding of AAPM members from 2002–2015. Learning Objectives: 1.To learn about current federal funding initiatives relevant to medical physics research 2.To learn about tactics important for crafting convincing research proposals 3.To learn about an independent study of NIH funding of research done by AAPM members B. Whelan, this work was commissioned and funded by the AAPM

In this work, the authors present a novel magnetic resonance imaging reconstruction method to improve the quality of MR images in the presence of respiratory motion for real-time thoracic image-guided radiotherapy.This new reconstruction method is called dynamic keyhole and utilizes a library of previously acquired, peripheral k-space datasets from the same (or similar) respiratory state in conjunction with central k-space datasets acquired in real-time. Internal or external respiratory signals are utilized to sort, match, and combine the two separate peripheral and central k-space datasets with respect to respiratory displacement, thereby reducing acquisition time and improving image quality without respiratory-related artifacts. In this study, the dynamic keyhole, conventional keyhole, and zero-filling methods were compared to full k-space acquisition (ground truth) for 60 coronal datasets acquired from 15 healthy human subjects.For the same image-quality difference from the ground-truth image, the dynamic keyhole method reused 79% of the prior peripheral phase-encoding lines, while the conventional keyhole reused 73% and zero-filling 63% (p-value0.0001), corresponding to faster acquisition speed of dynamic keyhole for real-time imaging applications.This study demonstrates that the dynamic keyhole method is a promising technique for clinical applications such as image-guided radiotherapy requiring real-time MR monitoring of the thoracic region. Based on the results from this study, the dynamic keyhole method could increase the temporal resolution by a factor of five compared with full k-space methods.

This paper analyses the results of a special sample survey on risk and investment carried out using the European Union investment survey sampling frame for Ireland. The paper looks at decision-making by large manufacturing firms located in Ireland to see whether their investment decisions can be understood within the various models of risk that economists use. Equilibrium and disequilibrium models are examined to see what best explains the behaviour revealed by the firms’ responses. The paper develops a categorisation of the main theoretical channels of influence from risk to investment. In the light of this theory, the survey replies of Irish firms are used to assess the importance of the different channels of influence.

Purpose: Recent advances towards MRI Linac radiotherapy have motivated a wide range of studies characterizing electromagnetic interactions between the two devices. One of the most sensitive components is the linac electron gun. To data, only non gridded (diode) guns have been investigated however, most linac vendors utilize gridded (triode) guns, which enable efficient and robust beam gating. The purpose of this study was to develop a realistic model of a gridded gun used clinically, and to characterize its performance in magnetic fields. Methods: The gridded electron gun used on Varian high energy machines was measured using 3D laser scanning quoted as accurate to 0.1mm. Based on the scane, a detailed CAD mode was developed. From this, key geometry was extracted and a FEM model was developed (Opera/SCALA). Next, the high voltage (HV), grid voltage, and emission current were read from six dose matched TrueBeam linacs for the 6X, 10X and 15X photon modes (0 B-field). The mean values were used to represent each mode, which was simulated I constant magnetic fields from 0–200G in-line, and 0–35G perpendicular. Results: Experimentally measured HV, grid voltage, and emission current from 6X, 10X and 15X modes were respectively: 15±.03kV, 10±.08kV, 11±.03kV; 93±7V, 41±3V, and 70±6V; 327±27mA, 129±10mA, and 214±19mA. The error in simulated emission current of each mode was 3%,6%, and 3%. For in-line fields, 50% beam loss occurred at 114, 96, and 97G; for perpendicular; at 12, 13 and 14G. Sensitivity for a given geometry is primarily determined by HV setting. Conclusion: Future MRI-Linac systems will almost certainly use gridded guns. We present the first model of a clinical gridded gun, and match the experimental emission current to within 6% across three different operating modes. This clinical gun shows increased sensitivity to magnetic fields than previous work,and different modes show different sensitivity.

Purpose: MRI guided radiation therapy (MRIgRT) is a rapidly growing field; however, Linac operation in MRI fringe fields represents an ongoing challenge. We have previously shown in-silico that Linacs could be redesigned to function in the in-line orientation with no magnetic shielding by adopting an RF-gun configuration. Other authors have also published insilico studies of Linac operation in magnetic fields; however to date no experimental validation data is published. This work details the design, construction, and installation of an experimental beam line to validate our in-silico results. Methods: An RF-gun comprising 1.5 accelerating cells and capable of generating electron energies up to 3.2MeV is used. The experimental apparatus was designed to monitor both beam current (toroid current monitor), spot size (two phosphor screens with viewports), and generate peak magnetic fields of at least 1000G (three variable current electromagnetic coils). Thermal FEM simulations were developed to ensure coil temperature remained within 100degC. Other design considerations included beam disposal, vacuum maintenance, radiation shielding, earthquake safety, and machine protection interlocks. Results: The beam line has been designed, built, and installed in a radiation shielded bunker. Water cooling, power supplies, thermo-couples, cameras, and radiation shielding have been successfully connected and tested. Interlock testing, vacuum processing, and RF processing have been successfully completed. The first beam on is expected within weeks. The coil heating simulations show that with care, peak fields of up to 1200G (320G at cathode) can be produced using 40A current, which is well within the fields expected for MRI-Linac systems. The maximum coil temperature at this current was 84degC after 6 minutes. Conclusion: An experimental beam line has been constructed and installed at SLAC in order to experimentally characterise RF gun performance in in-line magnetic fields, validate in-silico design work, and provide the first published experimental data relating to accelerator functionality for MRIgRT.

This paper investigates whether households and small businesses can voluntarily take advantage of the South Africa’s substantial wind resources to produce their own power from small-scale wind turbines in a viable way. The viability of small-scale wind turbines used to displace electricity consumption from the grid is assessed by means of a financial analysis based on the internal rate of return method. The benefits of small-scale wind turbines output is valued at the grid power tariff which is saved rather than at the wind feed-in tariff rate. The analysis found the small-scale wind turbines to be robustly viable in locations with a mean annual wind speed of at least 8m/s, which is only a few of the windiest locations in South Africa. The competiveness of the wind turbines is seriously challenged by the relatively low coal-based electricity tariffs in South Africa. As such, the financial analysis also considers alternative scenarios where the turbines are supported by financial mechanisms, namely: a tariff subsidy; a capital subsidy and revenue from carbon credits. The analysis reveals that a tariff subsidy of between R1.00 and R1.60/kWh or a capital subsidy of between R25.95 and R32.330/kW or a carbon credit price of between R2.135 and R3.200 will be needed to boost the viability of consumer-based small-scale wind turbines in areas with a mean annual wind speed of at least 5m/s, which is considered to be above average. Thus, there is a need for subsidizing all producers of renewable energy including those who produce it for their own consumption as they equally contribute to renewable energy expansion in the country. A tariff subsidy is however likely to be met with both political and public resistance if it means that consumers have to cross-subsidize the tariff, while the significant funds required for capital subsidies might not be freely available. Carbon credit prices have yet to mature to the required high levels. Thus, the removal of distortionary support to coal-based electricity generation might be the only currently available alternative of enhancing viability of consumer-based small-scale wind turbines.

Purpose: To test the functionality of medical electron guns within the fringe field of a purpose built superconducting MRI magnet, and to test different recovery techniques for a variety of imaging field strengths and SIDs. Methods: Three different electron guns were simulated using Finite Element Modelling; a standard diode gun, a standard triode gun, and a novel diode gun designed to operate within parallel magnetic fields. The approximate working regime of each gun was established by assessing exit current in constant magnetic fields of varying strength and defining ‘working’ as less than 10% change in injection current. Next, the 1.0T MRI magnet was simulated within Comsol Multiphysics. The coil currents in this model were also scaled to produce field strengths of .5, 1, 1.5 and 3T. Various magnetic shield configurations were simulated, varying the SID from 800 to 1300mm. The average magnetic field within the gun region was assessed together with the distortion in the imaging volume - greater than 150uT distortion was considered unacceptable. Results: The conventional guns functioned in fields of less than 7.5mT. Conversely, the redesigned diode required fields greater than .1T to function correctly. Magnetic shielding was feasible for SIDS of greater than 1000mm for fieldmore » strengths of .5T and 1T, and 1100mm for 1.5 and 3.0T. Beyond these limits shielding resulted in unacceptable MRI distortion. In contrast, the redesigned diode could perform acceptably for SIDs of less than 812, 896, 931, and 974mm for imaging strengths of 0.5, 1.0, 1.5, 3.0T. Conclusions: For in-line MRIlinac configurations where the electron gun is operating in low field regions, shielding is a straight forward option. However, as magnetic field strength increases and the SID is reduced, shielding results in too great a distortion in the MRI and redesigning the electron optics is the preferable solution. The authors would like to acknowledge funding from the National Health and Research Council (AUS), National Institute of Health (NIH), and Cancer Institute NSW.« less

A method is described for the synthesis of a series of 2'-aryl-3-azabi- cyclospiro-4'(5')-imidazolines via the reaction of azabicyclic 1,2-di- amines with aryl imidate salts. Competing reactions in the synthesis of the diamines such as the reduction of amino nitriles with LiAlH 4 lead to some anomalous products. In the Pinner synthesis, unstable pyridine- type imidates were stabilized as their N-oxide derivatives

All advanced economies are experiencing rapid population ageing caused by the combination of an increase in longevity and a sharp drop in fertility rates. This phenomenon is reducing the share of the working-age population in many of these countries, and is thus likely to exert negative pressure on economic growth. The rising old-age dependency ratio also poses serious problems for the public finances through growing pressures for expenditure on pensions, health and long-term care. Unless participation rates rise markedly, labour force growth will fall in the majority of European countries as well as in Japan (see OECD, 2006). If current trends of early retirement do not improve considerably, the exits from the labour force will begin to outnumber labour market entrants, imposing heavy costs of adjustment on employers.

This paper investigates whether South African households and small businesses can take advantage of the country’s substantial wind resources to produce their own power from small-scale wind turbines in a viable way. The viability of small-scale wind turbines is assessed by means of a financial analysis based on the internal rate of return method. The recently announced wind feed-in tariff will not affect the viability of consumer-based small-scale wind turbines considered in this paper since such turbines are used to displace electricity consumption from the grid rather than supplying electricity to the grid. Thus the benefits of such wind turbines’ output is valued at the grid power tariff which is saved rather than at the wind feed-in tariff rate as electricity arbitrage opportunities are non-existent because of the smallness of the turbines. The analysis found the turbines to be viable in only a few of the windiest locations in South Africa. As the competiveness of the turbines is seriously challenged by the relatively low coal-based electricity tariffs in South Africa the financial analysis also considers alternative scenarios where the turbines are supported by financial mechanisms, namely: a tariff subsidy; a capital subsidy and revenue from carbon credits. The analysis reveals that a tariff subsidy of about R1.45/kWh or capital subsidy of about R30,000/kW will be more effective in boosting the viability of consumer-based small-scale wind turbines in areas with winds of at least 5m/s. Thus, if the government’s goal is renewable energy expansion in the country, there is a need for subsidizing all producers of renewable energy including those who produce it for their own consumption as they equally contribute to that goal. A tariff subsidy is however likely to be met with both political and public resistance if it means that consumers have to cross-subsidize the tariff. Also, the significant funds required for capital subsidies might not be freely available. An alternative solution would be granting soft loans to potential wind turbine buyers. Ultimately, the removal of distortionary support to coal-based electricity generation will go a long way in enhancing the viability of small-scale wind turbines.

Purpose: MRI guided radiotherapy is a rapidly growing field; however current linacs are not designed to operate in MRI fringe fields. As such, current MRI- Linac systems require magnetic shielding, impairing MR image quality and system flexibility. Here, we present a bespoke electron accelerator concept with robust operation in in-line magnetic fields. Methods: For in-line MRI-Linac systems, electron gun performance is the major constraint on accelerator performance. To overcome this, we propose placing a cathode directly within the first accelerating cavity. Such a configuration is used extensively in high energy particle physics, but not previously for radiotherapy. Benchmarked computational modelling (CST, Darmstadt, Germany) was employed to design and assess a 5.5 cell side coupled accelerator with a temperature limited thermionic cathode in the first accelerating cell. This simulation was coupled to magnetic fields from a 1T MRI model to assess robustness in magnetic fields for Source to Isocenter Distance between 1 and 2 meters. Performance was compared to a conventional electron gun based system in the same magnetic field. Results: A temperature limited cathode (work function 1.8eV, temperature 1245K, emission constant 60A/K/cm2) will emit a mean current density of 24mA/mm2 (Richardson’s Law). We modeled a circular cathode with radius 2mm and mean current 300mA. Capture efficiency of the device was 43%, resulting in target current of 130 mA. The electron beam had a FWHM of 0.2mm, and mean energy of 5.9MeV (interquartile spread of 0.1MeV). Such an electron beam is suitable for radiotherapy, comparing favourably to conventional systems. This model was robust to operation the MRI fringe field, with a maximum current loss of 6% compared to 85% for the conventional system. Conclusion: The bespoke electron accelerator is robust to operation in in-line magnetic fields. This will enable MRI-Linacs with no accelerator magnetic shielding, and minimise painstaking optimisation of the MRI fringe field. This work was supported by US (NIH) and Australian (NHMRC & Cancer Institute NSW) government research funding. In addition, I would like to thank cancer institute NSW and the Ingham Institute for scholarship support.

Purpose: In this work, the authors present a novel magnetic resonance imaging reconstruction method to improve the quality of MR images in the presence of respiratory motion for real-time thoracic image-guided radiotherapy. Methods: This new reconstruction method is called dynamic keyhole and utilizes a library of previously acquired, peripheral k-space datasets from the same (or similar) respiratory state in conjunction with central k-space datasets acquired in real-time. Internal or external respiratory signals are utilized to sort, match, and combine the two separate peripheral and central k-space datasets with respect to respiratory displacement, thereby reducing acquisition time and improving image quality without respiratory-related artifacts. In this study, the dynamic keyhole, conventional keyhole, and zero-filling methods were compared to full k-space acquisition (ground truth) for 60 coronal datasets acquired from 15 healthy human subjects. Results: For the same image-quality difference from the ground-truth image, the dynamic keyhole method reused 79% of the prior peripheral phase-encoding lines, while the conventional keyhole reused 73% and zero-filling 63% (p-value < 0.0001), corresponding to faster acquisition speed of dynamic keyhole for real-time imaging applications. Conclusions: This study demonstrates that the dynamic keyhole method is a promising technique for clinical applications such as image-guided radiotherapy requiring real-time MR monitoring of the thoracic region. Based on the results from this study, the dynamic keyhole method could increase the temporal resolution by a factor of five compared with full k-space methods. © 2014 American Association of Physicists in Medicine .[ http://dx.doi.org/10.1118/1.4883882]

Purpose: To test the hypothesis that the novel Dynamic Keyhole MRI reconstruction technique can accelerate image acquisition whilst maintaining high image quality for lung cancer patients. Methods: 18 MRI datasets from 5 lung cancer patients were acquired using a 3T MRI scanner. These datasets were retrospectively reconstructed using (A) The novel Dynamic Keyhole technique, (B) The conventional keyhole technique and (C) the conventional zero filling technique. The dynamic keyhole technique in MRI refers to techniques in which previously acquired k-space data is used to supplement under sampled data obtained in real time. The novel Dynamic Keyhole technique utilizes a previously acquired a library of kspace datasets in conjunction with central k-space datasets acquired in realtime. A simultaneously acquired respiratory signal is utilized to sort, match and combine the two k-space streams with respect to respiratory displacement. Reconstruction performance was quantified by (1) comparing the keyhole size (which corresponds to imaging speed) required to achieve the same image quality, and (2) maintaining a constant keyhole size across the three reconstruction methods to compare the resulting image quality to the ground truth image. Results: (1) The dynamic keyhole method required a mean keyhole size which was 48% smaller than the conventional keyhole technique and 60% smaller than the zero filling technique to achieve the same image quality. This directly corresponds to faster imaging. (2) When a constant keyhole size was utilized, the Dynamic Keyhole technique resulted in the smallest difference of the tumor region compared to the ground truth. Conclusion: The dynamic keyhole is a simple and adaptable technique for clinical applications requiring real-time imaging and tumor monitoring such as MRI guided radiotherapy. Based on the results from this study, the dynamic keyhole method could increase the imaging frequency by a factor of five compared with full k-space methods.

Purpose: To develop a flexible and standalone framework for batch calculation of radiobiological dose metrics from Dicom-RT. Methods: Software has been developed which allows (1) The calculation of DVH data from DICOM dose and structure files (DVHgenerator), (2) Calculation of a wide range of radiobiological metrics from this data (CompPlanGui). Both these tools are run via graphical user interface (GUI), making them fast and simple. Part 1 is a new tool which has not previously been published, whilst part 2 is a GUI overlay for the previously published software ‘Comp-Plan’ (Holloway et. al., Medical Dosimetry, 2012), previously reliant on command line interface. The time taken for an experienced user to evaluate a test case of 6 plans with and without CompPlanGUI was quantified. Results: The DVH-generator has been found to be faster, more robust and require far less physical memory then using alternative software solutions for the same purpose. The Comp Plan GUI significantly reduces the amount of time required to set up a base directory, eliminates code crashes arising from typographical errors, and renders the code far more accessible to non-expert users. It took an experienced user of the code around 3 minutes to set up a base directorymore » of 6 plans compared around 8 minutes without, indicating that using CompPlanGUI reduced setup time by over 50%. Conclusion: A standalone GUI based framework has developed which allows for the batch calculation of radiobiological dose metrics directly from Dicom-RT files. As with the original code, this work will be made freely available on request, as well as via matlab file exchange.« less

Given the costly economic impacts of the recent electricity supply shocks in South Africa, the significant inflation in energy prices and the growing recognition at household, business and government level of the need to address the carbon intensity of electricity consumption in South Africa there may be a window of opportunity for microgeneration renewable energy technologies to offer a solution to these challenges. This paper contemplates whether households, business and the agriculture sector can take advantage of the country’s substantial wind resources to produce supplementary power from small-scale wind turbines in a viable way. The viability of small-scale wind turbines is assessed by means of a financial analysis based on the IRR method. The analysis found the turbines to be viable at a number of locations in South Africa. As the competitiveness of the turbines is seriously challenged by the relatively low electricity tariffs in South Africa the financial analysis also considers alternative scenarios where the turbines are supported by financial mechanisms, namely: a tariff subsidy; a capital subsidy and revenue from sale of carbon credits. The analysis reveals that a tariff or capital subsidy will be more effective in boosting the viability of a smallscale wind turbines than the sale of carbon credits. A tariff subsidy is however likely to be met with both political and public resistance if it means that consumers have to cross-subsidize the tariff, while the significant funds required for capital subsidies might not be freely available in the public sector. Climate Change: Global Risks, Challenges and Decisions IOP Publishing IOP Conf. Series: Earth and Environmental Science 6 (2009) 192021 doi:10.1088/1755-1307/6/9/192021

Employing data from a recent national the survey of people 65 and over residing in Republic of Ireland, questioning the assumption that living alone constitutes a problem, this paper uses multiple regression analysis to explore variation in recency of contact with (1) children, (2) siblings and (3) access to aid during illness. While theoretically coherent variables explain a substantial amount of variation in recency of contact with children and to a lesser degree with siblings, only a modest amount of the variation in aid during illness is explained.

A method is described for the synthesis of a series of 2'-aryl-3-azabi- cyclospiro-4'(5')-imidazolines via the reaction of azabicyclic 1,2-di- amines with aryl imidate salts. Competing reactions in the synthesis of the diamines such as the reduction of amino nitriles with LiAlH 4 lead to some anomalous products. In the Pinner synthesis, unstable pyridine- type imidates were stabilized as their N-oxide derivatives

This paper attempts to explain why among Irish people 65 and over residing with children some head the household and [others] do not. Employing a national sample of Irish elderly people it was hypothesized that household headship would be positively associated with age sex and location of respondent as well as employment status and income. All of these hypotheses were confirmed. Moreover the results of a regression procedure yielded an explained variance of 31 percent for household headship with all of the above independent [variables] contributing significantly to it. (EXCERPT)