Search

Scintillators are used extensively in X-ray imaging technologies from medical diagnostics to security inspections. Scintillation materials convert high-energy radiation to optical light through a highly non-linear multi-stage process. The last stage of the process is light emission via spontaneous emission, which usually governs and limits the scintillator emission rate and light yield. For decades, the desire for faster emission rate and greater light yield motivated the frontier of scintillators research to focus on developing better materials and dopants. Here, we experimentally demonstrate a fundamentally different, recently proposed concept for enhancing the scintillation rate and yield: the Purcell effect. The Purcell effect is the universal enhancement of spontaneous emission by engineering the optical environment. In the case of scintillators, such an enhancement arises from engineering the nanoscale geometry within the scintillation bulk, which thus applies universally to any scintillating material and dopant. We design and fabricate a thin multilayer nanophotonic scintillator, demonstrating Purcell-enhanced scintillation, achieving a 50% enhancement in emission rate and an 80% enhancement in light yield. We also demonstrate the potential of our device for realizing these enhancements in real-life settings for X-ray imaging applications. First, we show that these enhancements are robust to fabrication inaccuracies due to the robustness of the nanophotonic design. Second, we demonstrate a 3-fold resolution enhancement in X-ray imaging. Our results show the bright prospects of bridging nanophotonics and scintillators science: toward reduced radiation dosage and increased resolution in medical X-ray imaging, nuclear medicine, and other technologies relying on detection of high-energy particles.

The rapid development of solar cells based on lead halide perovskites (LHPs) has prompted very active research activities in other closely-related fields. Colloidal nanostructures of such materials display superior optoelectronic properties. Especially, one-dimensional (1D) LHPs nanowires show anisotropic optical properties when they are highly oriented. However, the ionic nature makes them very sensitive to external environment, limiting their large scale practical applications. Here, we introduce an amphiphilic block copolymer, polystyrene-block-poly(4-vinylpyridine) (PS-P4VP), to chemically modify the surface of colloidal CsPbBr3 nanowires. The resulting core-shell nanowires show enhanced photoluminescent emission and good colloidal stability against water. Taking advantage of the stability enhancement, we further applied a modified Langmuir-Blodgett technique to assemble monolayers of highly aligned nanowires, and studied their anisotropic optical properties. [Figure not available: see fulltext.].

One-dimensional (1D) nanomaterials with highly anisotropic optoelectronic properties are key components in energy harvesting, flexible electronics, and biomedical imaging devices. 3D patterning methods that precisely assemble nanowires with locally controlled composition and orientation would enable new optoelectronic device designs. As an exemplar, we have created and 3D-printed nanocomposite inks composed of brightly emitting colloidal cesium lead halide perovskite (CsPbX3, X = Cl, Br, and I) nanowires suspended in a polystyrene-polyisoprene-polystyrene block copolymer matrix. The nanowire alignment is defined by the programmed print path, resulting in optical nanocomposites that exhibit highly polarized absorption and emission properties. Several devices have been produced to highlight the versatility of this method, including optical storage, encryption, sensing, and full-color displays.

© 2019 American Chemical Society. Lead toxicity has sparked interest into alternative halide nanomaterials with properties similar to CsPbX 3 perovskites. A promising alternative suggested from bulk studies is the family of double perovskites of the form Cs 2 AgMX 6 . Here, we report the synthesis of colloidal Cs 2 AgInCl 6 and Cs 2 AgSbCl 6 nanocrystals via injection of acyl halides into a metal acetate solution under atmospheric conditions and relatively mild temperatures. We demonstrate the synthesis of single-crystalline cubic nanocrystals of ca. 10 nm side length and their morphological similarities to other double perovskite nanostructures in terms of their [200] facet termination and decoration with Ag (0) smaller nanocrystallites. To compare the stabilities of the synthesized materials, we develop a titration assay based on the degradation of nanocrystals with amines as a proxy for degradation by humidity, which provides a quantifiable stability metric. This measurement shows that Cs 2 AgSbCl 6 releases more than twice the decomposition energy compared to Cs 2 AgInCl 6 or CsPbCl 3 and degrades in the presence of approximately one molar equivalent of amine, whereas the other two materials require more than a 100-fold excess. Using facile chemical titration to quantitatively determine chemical stability provides an additional tool to aid in the basic understanding of what makes some of these materials more environmentally stable than others.

Treatment of InP colloidal quantum dots (QDs) with hydrofluoric acid (HF) has been an effective method to improve their photoluminescence quantum yield (PLQY) without growing a shell. Previous work has shown that this can occur through the dissolution of the fluorinated phosphorus and subsequent passivation of indium on the reconstructed surface by excess ligands. In this article, we demonstrate that very significant luminescence enhancements occur at lower HF exposure though a different mechanism. At lower exposure to HF, the main role of the fluoride ions is to directly passivate the surface indium dangling bonds in the form of atomic ligands. The PLQY enhancement in this case is accompanied by red shifts of the emission and absorption peaks rather than blue shifts caused by etching as seen at higher exposures. Density functional theory shows that the surface fluorination is thermodynamically preferred and that the observed spectral characteristics might be due to greater exciton delocalization over the outermost surface layer of the InP QDs as well as alteration of the optical oscillator strength by the highly electronegative fluoride layer. Passivation of surface indium with fluorides can be applied to other indium-based QDs. PLQY of InAs QDs could also be increased by an order of magnitude via fluorination. We fabricated fluorinated InAs QD-based electrical devices exhibiting improved switching and higher mobility than those of 1,2-ethanedithiol cross-linked QD devices. The effective surface passivation eliminates persistent photoconductivity usually found in InAs QD-based solid films.

Lead halide perovskite nanocrystals (NCs) have emerged as attractive nanomaterials owing to their excellent optical and optoelectronic properties. Their intrinsic instability and soft nature enable a post-synthetic controlled chemical transformation. We studied a ligand mediated transformation of presynthesized CsPbBr3 NCs to a new type of lead-halide depleted perovskite derivative nanocrystal, namely Cs4PbBr6. The transformation is initiated by amine addition, and the use of alkyl-thiol ligands greatly improves the size uniformity and chemical stability of the derived NCs. The thermodynamically driven transformation is governed by a two-step dissolution-recrystallization mechanism, which is monitored optically. Our results not only shed light on a decomposition pathway of CsPbBr3 NCs but also present a method to synthesize uniform colloidal Cs4PbBr6 NCs, which may actually be a common product of perovskite NCs degradation.

Ion-exchange transformations allow access to nanocrystalline materials with compositions that are inaccessible via direct synthetic routes. However, additional mechanistic insight into the processes that govern these reactions is needed. We present evidence for the presence of two distinct mechanisms of exchange during anion exchange in CsPbX3 nanocrystals (NCs), ranging in size from 6.5 to 11.5 nm, for transformations from CsPbBr3 to CsPbCl3 or CsPbI3. These NCs exhibit bright luminescence throughout the exchange, allowing their optical properties to be observed in real time, in situ. The iodine exchange presents surface-reaction-limited exchanges allowing all anionic sites within the NC to appear chemically identical, whereas the chlorine exchange presents diffusion-limited exchanges proceeding through a more complicated exchange mechanism. Our results represent the first steps toward developing a microkinetic description of the anion exchange, with implications not only for understanding the lead halide perovskites but also for nanoscale ion exchange in general.