Search

The characteristic dose profile of accelerated ions has opened up new horizons in the context of cancer treatment. However, particle range uncertainties strongly constrain the potentialities of ion beam therapy. Despite of worldwide efforts, a detector system for range and dose delivery assessment in real-time is not yet available for clinical routine. Complementary to the active- and passively collimated prompt gamma ray imaging systems for range assessment, the prompt gamma ray timing method has been recently proposed and tested at a research accelerator. Based on the measurable transit time of ions through matter, the emission times of prompt gamma rays encode essential information about the depth-dose profile. In a collaboration between OncoRay, Helmholtz-Zentrum Dresden-Rossendorf and IBA, the prompt gamma ray timing method was tested for the first time at a clinical proton accelerator (Westdeutsches Protonentherapiezentrum Essen) with different phantoms. Several fast scintillation detectors were used to acquire prompt gamma ray timing distributions at various geometries and proton energies. From the resulting distributions, particle range differences of around 5 millimetres in heterogeneous phantoms were observed by simple qualitative inspection. In conclusion, our preliminary analysis points out that the prompt gamma ray timing method for range verification is feasible in a clinical radiation environment and realistic phantoms, which reassures this novel approach as a promising alternative in the field of prompt gamma based in vivo dosimetry.

In the context of ion beam therapy, particle range verification is a major challenge for the quality assurance of the treatment. One approach is the measurement of the prompt gamma rays resulting from the tissue irradiation. A Compton camera based on several position sensitive gamma ray detectors, together with an imaging algorithm, is expected to reconstruct the prompt gamma ray emission density map, which is correlated with the dose distribution. At OncoRay and Helmholtz-Zentrum Dresden-Rossendorf (HZDR), a Compton camera setup is being developed consisting of two scatter planes: two CdZnTe (CZT) cross strip detectors, and an absorber consisting of one Lu2SiO5 (LSO) block detector. The data acquisition is based on VME electronics and handled by software developed on the ROOT framework. The setup has been tested at the linear electron accelerator ELBE at HZDR, which is used in this experiment to produce bunched bremsstrahlung photons with up to 12.5 MeV energy and a repetition rate of 13 MHz. Their spectrum has similarities with the shape expected from prompt gamma rays in the clinical environment, and the flux is also bunched with the accelerator frequency. The charge sharing effect of the CZT detector is studied qualitatively for different energy ranges. The LSO detector pixel discrimination resolution is analyzed and it shows a trend to improve for high energy depositions. The time correlation between the pulsed prompt photons and the measured detector signals, to be used for background suppression, exhibits a time resolution of 3 ns FWHM for the CZT detector and of 2 ns for the LSO detector. A time walk correction and pixel-wise calibration is applied for the LSO detector, whose resolution improves up to 630 ps. In conclusion, the detector setup is suitable for time-resolved background suppression in pulsed clinical particle accelerators. Ongoing tasks are the quantitative comparison with simulations and the test of imaging algorithms. Experiments at proton accelerators have also been performed and are currently under analysis.