Search

WOS:000967659000009 The utilization of plant extraction products from Oeneanthe pimpinelloides (Apiaceae family) seeds were investigated in terms of their use as an insecticide control of packaging materials. The aim was to investigate their insecticidal effects against the flour beetle Tribolium castaneum. The Oeneanthe pimpinelloides seeds were extracted with methanol. By using the liquid-liquid extraction method, the hexane extract (II) was separated from the methanol extract (I) and hexane and methanol were evaporated. Then, the chemical composition of each sample was determined via gas chromatography–mass spectrometry. The methanol extract predominantly contained tetrahydrofuran, 1-methoxy-2-propanol, 1-methoxy, 2-butoxyethanol, 1-phenylethanone, cyclohexene carboxylate derivative, (3-phenyl-2-propynylidene) cyclopropane, diphenyldiazene, and dihydroxypropyl ester components, while the hexane fraction contained nonane, 1-octanol, decane, undecane, tridecane, alkyl benzene, benzene sulfonic acid, benzoxazine, and hexadecanoic acid components, as well as some derivatives of them. Each fraction was dissolved in DMSO for impregnation on filter paper. The insecticide effects of the paper samples were determined against Tribolium castneum. According to the results, the mortality started after 3 d for each fraction. After 4 d, the hexane fraction indicated total mortality in comparison with the methanol fraction, which showed partial mortality (3/5).

From the end of the nineteenth century and one hundred years onward, home sewing was an important part of many women’s duties, but it was also a pleasure, something that existed parallel with the emerging mass-produced ready-to-wear industry. The paper patterns used for home dressmaking were often sold and distributed through women’s magazines. These pattern sections were both a kind of reader service and a conscious strategy to capture the female target group. This article, based on an analysis of three Swedish magazines, is the first in-depth survey of patterns for home sewing of women’s clothes in Sweden. The study shows how the magazines adapted to changes in society with increasingly easier patterns and ready-cut fabric for their readers. By highlighting women making their clothes in the home, this article contributes to an often-neglected area of women’s memory and fashion history.

Cellulose-based materials represent a renewable, biodegradable, and environmentally friendly alternative to plastic from fossil resources. Nanopaper is a strong and lightweight material formed from cellulose nanofibrils (CNFs). Paper and nanopaper have been considered as excellent alternatives to plastics for use in agriculture and for packaging applications. However, common for both paper and nanopaper is their hydrophilic character, and consequently, poor water-resistance properties. ORMOCER®s are a class of inorganic–organic polymers with excellent barrier and protective properties used for a range of coating applications. Here we present ORMOCER®-coated paper and nanopaper. The coated papers and nanopapers are characterized, both in terms of their morphology, hydrophobicity, and mechanical properties. We demonstrate that the pressure used during the pressing and drying of paper and nanopaper influence their tear and tensile—properties, and that the morphology of the coated nanopaper differs significantly from that of the coated paper. While the ORMOCER® was impregnated within the porous network of the paper, a well-defined two-layered morphology was obtained with the coated nanopaper. Further, the biodegradability of the nanopaper with and without coating was assessed. The degradation study demonstrated that both the pressure used during the pressing and drying of the nanopaper, and the composition of the ORMOCER®, influenced the rate of degradation. Taken together, ORMOCER®-coated paper and nanopaper are promising for the preparation of materials that are both water-resistant, renewable, and biodegradable.

We propose a unique form of dye-sensitized solar cells (DSSCs), paper DSSCs based on carbon-nanotube (CNT) composite papers, and the use of a gel electrolyte for the paper DSSC. In our previous study, we succeeded in developing the paper DSSC. However, its performance and lifetime were not sufficient. We considered that the problem was the use of liquid-type electrolyte. To improve the performance of the paper DSSC, a gel electrolyte was introduced to increase safety and durability. Here, a polymer gel electrolyte was synthesized using a copolymer of polyethylene glycol (PEG) and polyvinylidene fluoride (PVDF) as a matrix, mixed with iodine and potassium iodide. The resulting paper DSSC had a fill factor (FF, a performance indicator) of 0.248 and a conversion efficiency of 2.43 × 10−5% with an extended working time (lifetime) of more than 110 min. Further modifications were made to the metallic CNT composite paper and the gel electrolyte, resulting in an increased conversion efficiency of 2.02 × 10−3%. This study suggests the potential of gel electrolytes in enhancing the performance of paper DSSCs, providing new insights for their future applications.

The aim of this study is to propose a test method for the determination of the quality of transformer paper insulation. For this purpose, the oil/cellulose insulation systems were exposed to various accelerated aging tests. The results of the aging experiments of normal Kraft and thermally upgraded papers, two different types of transformer oil (mineral and natural ester), and copper are shown. Aging was carried out in various experiments at 150 °C, 160 °C, 170 °C, and 180 °C with dry (initial values ≤ 0.5%) and moistened cellulose insulation (initial values 3–3.5%). Following insulating oil and paper, degradation markers were measured: the degree of polymerization, tensile strength, furan derivates, methanol/ethanol, acidity, interfacial tension, and dissipation factor. It was found that the aging of cellulose insulation in cycles was 1.5–1.6 times faster in comparison to continuous aging, due to the more pronounced effect of hydrolytic mechanism in cyclic aging owing to the produced and absorbed water. Furthermore, it was observed that the high initial water content in cellulose increases the aging rate two to three times more than in the dry experimental setup. The proposed aging test in cycles can be used to achieve faster aging and to compare the quality of different insulating papers.

Currently, tissue product producers try to meet consumers’ requirements to retain their loyalty. In perforated products, such as toilet paper, these requirements involve the paper being portioned along the perforation line and not outside of it. Thus, it becomes necessary to enhance the behavior of the perforation line in perforated tissue papers. The current study aimed to verify if the perforation line for 0° (the solution found in commercial perforated products) is the best solution to maximize the perforation efficiency. A finite element (FE) simulation was used to validate the experimental data, where the deviations from the experiments were 5.2% for the case with a 4 mm perforation length and 8.8% for a perforation of 2 mm, and optimize the perforation efficiency using the genetic algorithm while considering two different cases. In the first case, the blank distance and the perforation line angle were varied, with the best configuration being achieved with a blank distance of 0.1 mm and an inclination angle of 0.56°. For the second case, the blank distance was fixed to 1.0 mm and the only variable to be optimized was the inclination angle of the perforation line. It was found that the best angle inclination was 0.67°. In both cases, it was verified that a slight inclination in the perforation line will favor partitioning and therefore the perforation efficiency.

Developing a convenient detection method for dopamine holds a significant incentive due to its high clinical significance. Herein, we synthesize crystalline MnOOH nanowires (MNWs) via a simple solvothermal treatment of KMnO4 and demonstrate that they possess excellent oxidase-like activity owing to the presence of pure Mn3+ sites on the MNWs. Particularly, MNWs catalyze the rapid oxidation of dopamine into aminochromes, which show a vivid brown color. The dopamine oxidase-like activity of MNWs follows the typical Michaelis–Mentenkinetics with excellent storage stability. Based on the affirmative catalytic features, a paper dipstick incorporating MNWs in the detection zone is constructed for the one-step colorimetric detection of target dopamine. By immersing the dipstick into the sample solution for 30 min, the sample spontaneously moves to the detection zone due to capillary force, yielding a brown color proportional to the amount of dopamine, which is quantified from an image acquired using a smartphone. With the MNW-containing solution-based assay and MNW-incorporated paper dipstick, dopamine is successfully determined with high selectivity, sensitivity, and detection precision when using spiked human serum and pharmaceutical dopamine injection samples, respectively. Successful analytical values such as the dynamic linear ranges of 3–60 μM and 0.05–7 mM are achieved with the solution-based assay and paper dipstick, respectively, along with excellent detection accuracy (95–99%) and precision (1.0–3.1%). Hence, we developed a simple and efficient nanozyme-based paper dipstick biosensor for dopamine that can be used in point-of-care testing environments.

Oil-impregnated paper condenser transformer bushings are an important part of transformer equipment, and partial discharge (PD) occurred when defects exist on the condenser aluminum foil layers. Firstly, to study the PD process of the oil-paper insulated capacitance graded bushing with the defect of broken aluminum foil, a defective oil-paper bushing discharge sample is constructed to study the PD parameters and capacitance, and to discharge carbonization traces at different voltage levels. Then, in order to verify the process of condenser aluminum foil layer discharge and the space charge variation in the oil-paper insulation system of a sample model, the surface flashovers of a needle-plane discharge model based on the bipolar charge transport model and the hydrodynamic model was built. The simulation, by Transport of Diluted Species physics of COMSOL Multiphysics software, points out the discharge process of aluminum foil electrode caused by space charge action and electric field distortion under an electric field at different voltages. The results of simulation and sample bushing experiments showed that the PD process of the defective condenser foil layer is mainly divided into three stages: tip corona discharge, streamer in oil, and surface flashovers. The voltage amplitude is larger the more electrical branches are discharged and the shorter the discharge time is. The findings of the article have important implications for the discharge of the foil layer inside the oil-paper bushing.

Transformers play a crucial role in power systems. In this respect, fault diagnosis and aging state assessment have garnered significant attention from researchers. Herein, accelerated thermal aging and Raman scattering experiments are conducted on oil–paper insulation samples to accurately detect aging states. The samples are categorized into different aging stages based on the polymerization degree of the insulating paper. Principal component analysis (PCA), multi-dimensional scale change method (MDS), and isometric mapping algorithm (Isomap) are employed to extract features from the Raman spectra. Subsequently, the XGBoost strong classifier, optimized through Bayesian hyperparameter optimization (BO-XGBoost), is utilized to distinguish between four and ten states among 175 groups of samples after feature extraction. The subsequent classification results of the three feature-extraction methods are compared. The results indicate that Isoamp, which pertains to the manifold dimension transformation, achieves the highest average discriminative accuracy after feature extraction. The discriminative accuracies for aging states four and ten are 97.0% and 95.1% respectively, demonstrating that Raman spectroscopy manifold dimension transformation enhances the distinctiveness between samples of different aging states in the feature-extraction process. The diagnostic model constructed with Isomap and BO-XGBoost enables accurate discrimination of the aging states of oil–paper insulation.

With the growing concern for environmental protection and personal health, utilizing bio-based impregnated resin has become a sustainable approach for producing aldehyde-free decorative paper and in-house decorations. Our current work focuses on the preparation of an aldehyde-free resin (AFR) by formulating quaternized cellulose nanofibrils (QCNFs, Ave. width 10 ± 3 nm, Ave. length of and >500 nm) with aqueous acrylate emulsion. We analyzed the synthesized QCNFs, acrylate emulsion, and AFR by using various methods, including FTIR, XPS, XRD, TGA/DTG, and rheometer, to evaluate their applicability for impregnated paper processing. At a low coating weight of 4.0 g/m2, a 30.8% increase and 4.9-times increase in tensile strength and contact angle were detected, respectively. Meanwhile, the free aldehyde emission from the AFR-coated paper was found to be 0.1 mg/L even at a high coating weight of 18.8 g/m2, which is far below the E0 level requirement in the JAS 234:2003 criteria. Therefore, the surface coating of the decorative base paper was found to be competitive in covering the porous structure of the paper, reinforcing its mechanical strength, and providing high water resistance. Moreover, the lower free aldehyde emission from the AFR-coated paper ensures its safety and potential application in house decoration products.

To extend the application of cost-effective high-yield pulps in packaging, strength and barrier properties are improved by advanced-strength additives or by hot-pressing. The aim of this study is to assess the synergic effects between the two approaches by using nanocellulose as a bulk additive, and by hot-pressing technology. Due to the synergic effect, dry strength increases by 118% while individual improvements are 31% by nanocellulose and 92% by hot-pressing. This effect is higher for mechanical fibrillated cellulose. After hot-pressing, all papers retain more than 22% of their dry strength. Hot-pressing greatly increases the paper’s ability to withstand compressive forces applied in short periods of time by 84%, with a further 30% increase due to the synergic effect of the fibrillated nanocellulose. Hot-pressing and the fibrillated cellulose greatly decrease air permeability (80% and 68%, respectively) for refining pretreated samples, due to the increased fiber flexibility, which increase up to 90% using the combined effect. The tear index increases with the addition of nanocellulose, but this effect is lost after hot-pressing. In general, fibrillation degree has a small effect which means that low- cost nanocellulose could be used in hot-pressed papers, providing products with a good strength and barrier capacity.

Internationally, teachers use oral reading fluency (ORF) measurements to monitor learning progress in reading and adapt instruction to the individual needs of students. In ORF measures, the child reads aloud single syllables, words, or short passages, and the teacher rates in parallel at which items the child makes a mistake. Since administering paper-based ORF requires increased effort on the part of teachers, computer-based test administration is available. However, there are still concerns about the comparability of paper-based and computer-based test modes. In our study, we examine mode effects between paper-based and computer-based test scores for both reading speed and reading accuracy using a German-language ORF assessment for progress monitoring. 2nd- and 3rd-year-students (N = 359) with and without special education needs participated in the study. Results show comparable and high reliability (r > 0.76) and no differential item functioning for both test modes. Furthermore, students showed significantly higher reading speed on the paper-based test, while no differences were found in reading accuracy. In the absence of differential item functioning, we discuss how mean differences can be accounted for, how teachers can be trained to use the different test modes, and how computer-based tests can be safeguarded in practice.

Paper-based friction material is a typical paper-based composite that is usually cured via hot-pressing. This curing method does not account for the effect of pressure on the matrix resin, resulting in uneven distribution of resin in the material and reducing the mechanical properties of friction materials. To overcome the above shortcomings, a pre-curing method was introduced before hot-pressing, and the effects of different pre-curing degrees on the surface morphology and mechanical properties of paper-based friction materials were studied. The pre-curing degree significantly affected the resin distribution and interfacial bonding strength of the paper-based friction material. When the material was cured at 160 °C for 10 min, the pre-curing degree reached 60%. At this point, most of the resin was in a gel state, which could retain abundant pore structures on the material surface without causing mechanical damage to the fiber and resin matrix during hot-pressing. Ultimately, the paper-based friction material exhibited improved static mechanical properties, decreased permanent deformation, and reasonable dynamic mechanical properties.

Paper has gained popularity as a packaging material due to its reduced environmental impact compared with non-degradable alternatives. However, its flammability poses safety risks, prompting research on enhancing its flame retardancy. This work introduces a diffusion-driven self-assembly strategy (DDSAS) to create a functional graphene oxide (GO) coating on various packaging papers. DDSAS involves infiltrating the paper’s cellulose microfiber network with branched polyethyleneimine (b-PEI), which binds firmly to cellulose microfibers. Electrostatic interactions between GO and b-PEI then drive GO assembly into a densely stacked, layered structure on the paper surface. This GO structure provides a physical barrier against flames and generates incombustible gases (CO2, H2O, NO2, and NO) when heated, diluting the surrounding oxygen concentration and acting as a heat insulation layer. These factors increase the flame retardancy of treated papers ten-fold. Additionally, the gradual reduction of GO upon heating forms reduced graphene oxide (rGO) on the paper, significantly increasing its electrical conductivity. As a result, the flame-retardant papers not only prevent the fire from spreading but can also act as fire sensors by triggering an alarm signal at the early stages of contact with fire. In summary, this work offers a rational strategy for designing and manufacturing flame-retardant paper packaging materials.

This article presents results on the use of a new material as a solidifying agent and/or color-fixing agent. A special polysaccharide material extracted from the prickly pear cactus (Opuntia ficus indica) was tested on historical materials and modern papers. An old book from the 18th century was chosen as historical material. From the mentioned book 42 pages were taken, on which a conservation and restoration pretreatment was performed before applying the polysaccharide material: sampling, fiber analysis, dry cleaning, ink solubility, pH test, thickness measurement and wet cleaning. The paper sheets provided for the test were divided into 4 groups, 3 of which were treated with gel and one left untreated as a reference. The division into groups is not only due to the different method of application, but also due to the process of gel extraction. The effect of the treatment was analyzed using FTIR-ATR. To test the mucilage as color-fixing agent 2 samples were prepared using watercolor papers colored with 6 different watercolors applied to 2.5 cm2 samples for each color in two rows of different intensity. One of the 2 samples was treated with gel, but both were immersed for 3 times in a water-ethanol solution for approximately 20 min as is standard practice in conservation and restoration. After washing, both specimens were subjected to colorimetric analysis to assess their differences. The results provided satisfactory evidence for the protection of paints sensitive to aqueous treatments and suggest the use of mucilage as a new material in cleaning method for water-soluble media.

Lead (Pb) pollution from local mines and industrial use increases risks for human, animal, and plant health. Pectin is an effective chelator of Pb, and it has been shown that a unicellular green alga, Penium margaritaceum, synthesizes pectin in the cell wall. In this study, the ability of P. margaritaceum to remove Pb from an aqueous solution was investigated. Energy dispersive X-ray spectroscopy revealed that two strains of P. margaritaceum accumulated Pb on the cell surface. Hence, P. margaritaceum cells were immobilized on cellulose filter paper. The immobilized algal cells were soaked in 1.0 mg/L Pb solution with gentle shaking for 8 h, and Pb in the solution and on the filter paper was measured by flame atomic absorption spectrometry. The immobilized algal cells continuously decreased the Pb concentration to less than 0.5 mg/L and recovered 31.8–32.7% of added Pb. The specific decrease in Pb and increase in Ca were observed in the presence of 1.0 mg/L each of Ca, Mg, Na, and K. Fourier transform infrared spectra suggested that the carboxylic acid group would be responsible for the adsorption of Pb. This study is the first to demonstrate the effectiveness of the immobilized P. margaritaceum cell in removing Pb from aqueous solutions with simple solid–liquid separation.

Carbon fiber paper (CFP) is one of the most important units of gas diffusion layer (GDL) in proton exchange membrane fuel cells (PEMFCs). The binder used in the wet-laid technique has a significant effect on the properties of CFP. In this work, the polyvinyl butyral/phenol-formaldehyde resin (PVB/PF) composite fibers firstly prepared by a dry spinning method were applied for CFP fabrication to replace traditional binders during the papermaking process and remove the PF impregnation process. In the composite fibers with a mass ratio of 5:5, PF phase with a size of about 2~3 μm evenly distributed in PVB matrix. PVB and PF were miscible to some degree, which was beneficial for their binding effect during hot-press. These composite fibers can successfully bind carbon fibers (CFs) during the papermaking process, and their residual carbon efficiently welded the CFs after heat treatment. The content and length of composite fibers in the mat affected the binding structure among CFs, which influenced the properties of CFP, increased the composite fibers’ content and reduced their length, significantly improving the strength of CFP. Therefore, the application of this solid fiber binder could enhance the comprehensive properties of CFP by adjusting the fibers’ parameters in the mat and also make the fabrication of CFP more environmentally friendly and low-cost.

This work presents the most important elements that affect the writing of scientific articles, but also those that determine the success for their acceptance and publication in impact journals. It also deals with aspects such as how to respond to peer review evaluations and how to disseminate the article once it has been published. The intended audience is trainee researchers and especially doctoral students who have chosen to carry out a thesis by compendium of publications. However, any researcher, junior or senior, will surely find several elements of interest in this work. It is also appropriate to add that the main academic background is that of social sciences in general and communication studies. This work is part of the development of methodologies within the project "Parameters and strategies to increase the relevance of media and digital communication in society: curation, visualization and visibility (CUVICOM)". PID2021-123579OB-I00 (MICINN), Ministry of Science and Innovation (Spain). Activity financed by the European Union- NextGenerationEU , Ministry of Universities and Recovery, Transformation and Resilience Plan, through a call from Pompeu Fabra University (Barcelona).

Microfibrillated cellulose (MFC) was prepared from post-consumer old corrugated container (OCC) material, which was first disintegrated in water, cleaned to remove impurities, and then fibrillated by grinding. Those processed MFCs were treated with in-situ formation of calcium carbonate by adding calcium oxide and injecting carbon dioxide into the mixture up to the ratio of 1:40 (MFC : calcium carbonate) by weight. The MFCs had a dark brown color initially but turned into high brightness materials similar to commercial ground calcium carbonate (GCC) after the in-situ formation process. The MFCs that had calcium carbonate attached on their surfaces, which were lengthy and flexible, were called flexible calcium carbonate from OCC (FCCO). Paper containing FCCO gave higher bulk, higher stiffness, and higher tensile index without lowering smoothness when compared to the paper containing commercial GCC. However, brightness was slightly lowered because of initial low brightness of the OCC. This study also demonstrated the feasibility to substitute wood fibers up to 5% with FCCO without lowering essential properties for printing paper. Benefits of the waste paper are savings of both wood resources and production cost.

Paper, which is in fact a very complex cellulose-based product derived from different lignocellulosic resources, is usually regarded as a simple omnipresent commodity in our lives. Wood fibers derived from trees are the most employed sources for papermaking purposes. From an environmental protection perspective, and for their essential role in our life (they give us the life itself through their foliar system supporting the photosynthesis process), trees should not be extensively cut down and they should be used less and less for papermaking. Thus, employment of non-woody alternative sources for papermaking could be exploited more as an attractive and feasible option.

Spatially resolved fluid-flow modulation and its corresponding integration becomes a crucial aspect to consider when designing high-performing paper-based analytical devices. As such, high demand exists for cost-effective techniques able to selectively control flow in patternable regions of the device. In this regard, a solution composed of potassium alum and animal glue; sizing materials used in the fabrication of calligraphy Xuan paper, is successfully adapted for the first time in a revolutionary approach to efficiently modulate the capillary flow in paper microfluidic channels. Flow delays are achieved by coating the substrate systematically through the variation of parameters such as the ratio of alum to glue, the concentration of alum-glue in the solution, and the number of subsequent coating layers of alum-glue. Moreover, digitized patterning with alum-glue is developed to achieve programmable wicking profiles of accelerating, decelerating, and quasi-linear flow displacement by alternating coated and uncoated zones in the channel. Additionally, the influence of alum-glue when performing biometric assays is investigated by performing a horseradish peroxidase activity colorimetric assay and found to have negligible effects on reading, where a negligible difference of 5.2% was observed in an assay performed in a coated paper substrate, compared to an uncoated one.

We develop a vision system for batch inspection by oven white paper model color by manufacturing a machine vision system for the oven manufacturing automation process. In the vision system, white paper object detection (spring), color clustering, and histogram extraction are performed. In addition, for the automated process of home appliances, we intend to develop an automatic mold combination detection algorithm that inspects the label position and direction (angle/coordinate) using deep learning.

Ning Gao,1,* Meng Li,2,* Weiming Wang,1 Lei Wang,3 Zhen Liu,4 Yufeng Guo1 1Department of Acupuncture and Moxibustion, Guang’anmen Hospital, China Academy of Chinese Medical Sciences, Beijing, 100053, People’s Republic of China; 2Department of Gastroenterology, Guang’anmen Hospital, China Academy of Chinese Medical Sciences, Beijing, 100053, People’s Republic of China; 3Department of Dermatology, China-Japan Friendship Hospital, Beijing, 100020, People’s Republic of China; 4Department of Gastroenterology, Xiyuan Hospital, China Academy of Chinese Medical Sciences, Beijing, 100091, People’s Republic of China*These authors contributed equally to this workCorrespondence: Zhen Liu, Department of Gastroenterology, Xiyuan Hospital, China Academy of Chinese Medical Sciences, No. 1 Xiyuan Playground, Haidian District, Beijing, People’s Republic of China, Email doctorliuzhen@126.com Yufeng Guo, Department of Acupuncture and Moxibustion, Guang’ an Men Hospital, China Academy of Chinese Medical Sciences, No. 5 Beixiange St., Xicheng District, Beijing, People’s Republic of China, Email gamgyf@139.comBackground: In recent years, the incidence of herpes zoster has risen steeply, the exact pathogenesis of the acute pain and the transformation into postherpetic neuralgia are still obscure, and the absence of effective management remains a major therapeutic challenge. The purpose of this study was to perform a qualitative and quantitative bibliometric analysis of the 100 most cited papers on herpes zoster.Materials and methods: Related literature were retrieved from the Web of Science Core Collection. Excel and VOSviewer software were applied to quantitatively analyze, and construct the bibliometric network charts.Results: The Top 100 most-cited papers published between 2000 and 2018 showed a fluctuating downward trend. The most studies were published in the year of 2000 (n = 12). The article entitled “A vaccine to prevent herpes zoster and postherpetic neuralgia in older adults” from Oxman MN, was the most-cited publication. The United States was the most contributing country, followed by the United Kingdom, and Italy. Finland occupied the highest citations per publication (CPP). The University of Colorado topped the list of institutions with the most publications with 18 articles and also had the most citations (average citations: 281.78 per article). Myron J Levin from the University of Colorado School of Medicine is the most published and most cited researcher overall, whereas Duke University’s John W Gnann tops the list in terms of average CPP.Conclusion: In terms of the quantity of T100 articles, researchers, and organizations, the US is the predominant country. The most T100 papers were published in the special journal Clinical Infectious Diseases. The most academic focus remain the remedies for postherpetic neuralgia and vaccine development for individualized groups.Keywords: herpes zoster, bibliometric study, top-cited, citation, VOSviewer

A surface profilometry technique was used to characterize the surfaces of paper products. A stylus-contact type profilometer capable of simultaneously generating both surface roughness- and friction-profiles was used. As a stylus for the profilometer, a conical shape whose tip was rounded to have a 0.5 mm curvature radius was designed and successfully employed in both printing & writing (P&W) papers and hygiene papers such as bathroom tissues and kitchen towel. From the profiles, the mean absolute deviation (MAD) from the averages, i.e., R-MAD from the roughness average and F-MAD from the average coefficient of friction, were suggested as the new surface characterization parameters. To elucidate the surface roughness profiles by fractal dimension analysis, the variogram method was applied to get the fractal dimensions of the paper products. Generally, the value of the fractal dimension increased as the surface roughness increased. The surface profilometry technique with the fractal dimension analysis with the variogram method looks promising to gain additional insight on the surface characteristics of paper products.

Introduction: Summative assessments play a major role in shaping the student’s learning. There is little literature available on validity of summative assessment question papers in Forensic Medicine & Toxicology. This study analyses 30 question papers from 6 reputed universities for content validity. Methods: A retrospective cross-sectional record-based observational study was conducted where 30 university summative question papers in Forensic Medicine & Toxicology from 6 universities across India were evaluated for content validity. The learning domain assessed, the type of questions asked, and sampling of the content was compared and presented in the results. Results: From the results of the study, it was noted that 80% weightage was allotted to recall in most papers and only one paper tested for application. 70 to 80% of the marks were allotted to Forensic Pathology leading to disproportionate sampling. Core areas in Toxicology and Medical Jurisprudence were sparsely assessed. Conclusion: The content validity of the summative question papers in Forensic Medicine and Toxicology was unsatisfactory, emphasising the need for evaluation of the clarity and efficacy of the blueprints being used by the universities. Faculty training to motivate and influence a change in the mindset is necessary to bring about a course correction.

Demand for green environments has stimulated research on the migration from conventional to renewable energy sources. In the case of combustible energy for domestic applications, briquettes produced from biomass have proven to be a good replacement for wood fuel. In this study, investigation on the performance analysis and optimization of mix ratio of briquettes produced from sugarcane bagasse using composite binders (waste paper and clay) was carried out. Box-Behnken Design feature of the Design Expert software was employed for the optimization of the briquettes mix ratio. Briquettes were produced from sugarcane bagasse based on the optimum conditions of 9.12% clay, 12.57% waste paper, 78.31% proportion of sugarcane bagasse and 5 KN compaction pressure. The produced briquette was found to have a compressive strength of 6.4715 MPa and 0.857 g/min burning rate. The results of the study shows that the experimental values were close to the predicted values with a percentage error of 3.11% for compressive strength and1.79% for burning rate which confirms the validity and adequacy of the predicted models.

This paper investigates the behaviour of partial discharge (PD) in transformer insulation paper based on the Finite Element Method (FEM). The three-dimensional (3D) FEM model consists of conductor and insulation paper, representing part of a transformer’s high voltage winding. The conductor’s width, height, and length used in this study were 2.4 mm, 11.5 mm, and 16 mm. An insulation paper thickness of 1 mm was modelled around the conductor. An internal cavity with a diameter of 0.5 mm cavity was introduced within the insulation paper. This study introduced two locations of the spherical cavities at the centre and left corner of the insulation paper: Location 1 (L1) and Location 2 (L2). An AC voltage of 33 kV, 50 Hz, was applied to the conductor while the bottom of the insulation paper was grounded. The model was used to study the electric field distribution within the insulation paper and its effect on PD current and charge magnitude. The influence of cavity location on the charge magnitude was also examined. It is found that the electric field distribution is influenced by the conductor configuration as well as the location of the cavity. The electric field in the cavity is the highest at L1 compared to L2. The first PD occurs faster for the cavity with a high electric field. Due to the PD occurrence at the same inception field, the real PD current and charge magnitude is similar at different locations. The apparent PD current and charge magnitude induced at the ground electrode is slightly higher at L1 than at L2.

Background: Development of computer-based software, termed electronic glucose management system (eGMS), offers an alternative strategy to manage diabetic ketoacidosis (DKA) compared with institution-specific paper protocols by integrating glucose and insulin titration into the electronic medical record. Objective: To evaluate the safety and efficacy of eGMS versus a paper-based DKA protocol in an urban academic medical center. Methods: Single-center, retrospective analysis of patients admitted for DKA. The primary objective of this study was the time to transition from intravenous to subcutaneous insulin after resolution of DKA pre- and post-eGMS implementation. Secondary outcomes included incidence of hypoglycemia while on an insulin infusion, intensive care unit (ICU) length of stay, and total hospital length of stay. Results: Time to DKA resolution was similar in both groups with a median time of 8.6 versus 8.8 hours in the paper-based (n = 133) and eGMS groups (n = 84), respectively ( P = 0.43). Hypoglycemia occurred more frequently in the paper-based group compared with eGMS during insulin infusion (14 vs 3 patients, P = 0.06). The median ICU (36.5 vs 41.4 hours; P = 0.05) and hospital length of stay (67.9 vs 77.8 hours; P = 0.05) were shorter in the paper-based group compared with the eGMS group. Conclusion and Relevance: Similar rates of DKA resolution were seen for patients managed with a paper-based protocol compared with eGMS. Patients in the paper-based protocol had a shorter ICU and hospital length of stay; however, eGMS had improved clinically relevant safety outcomes.

Cognitive bias, especially confirmation bias and motivated reasoning, poses a significant challenge to argumentative writing genres, including the persuasive essay. To address this challenge, I introduce the complexity paper. Rather than attempting to convince the reader of a particular position on an issue as with a persuasive essay, the goal of a complexity paper is to convince the reader that the issue under discussion is difficult to resolve. This altered motivational structure encourages the writer to engage in perspective taking, thereby addressing confirmation bias and motivated reasoning. I outline a three-part structure of the complexity paper using the example of physician-assisted suicide with the goal to help university instructors implement this genre into their courses. I recommend incorporating a complexity paper into a writing scaffold structure that precedes an argumentative paper.

This work examines the physical and electrical breakdown characteristics of kenaf paper coated with Polyvinyl Alcohol (PVA) for application in power transformers. The paper was made from kenaf bast fibers using the soda pulping method, whereby the pulps were subjected to 12,000 beating revolutions. PVA with weight percentage concentration up to 6% was introduced to the beaten kenaf through a spin coating approach. The structure of the kenaf paper was examined through Scanning Electron Microscopy (SEM). The physical properties examined were apparent density, Tensile Index (TI), Burst Index (BI), and Tear Index (TeI), while AC breakdown voltage and strength were analyzed for the electrical property. It is found that the beating and external PVA improve the kenaf paper’s apparent density, TI, BI, and AC breakdown strength while the TeI decreases.

Background: The incidence of colorectal cancer (CRC) in Asia has kept increasing in the last decade. The morbidity and mortality for CRC can be reduced with early detection; however, mass CRC screening with imaging modalities such as colonoscopy, CT scan, or MRI is unfeasible in developing countries such as Indonesia. Asia Pacific Colorectal Screening (APCS) is utilized to stratify individual CRC risk. Online screening via mobile application is an alternative method to ensure the continuity of community screening without risking COVID-19 transmission. Objective: We conducted a descriptive study to evaluate CRC risk using APCS in two different villages. Methods: This is a cross-sectional study involving 925 and 207 subjects in 2019 and 2020, respectively. The APCS survey in 2019 was done before the COVID-19 pandemic with paper-based questionnaires and direct assessment by door-to-door approach. Meanwhile, the APCS survey in 2020 was done during the COVID-19 pandemic using websites and mobile apps available for Android and iOS. We gathered participants’ characteristics and the APCS score in both groups and tabulated them. Results: In 2019, out of 925 subjects; 472 (51%) have been classified an average risk of CRC, 370 (40%) have been classified as having a moderate risk of CRC, and 83 (9%) have been classified as in high risk of CRC. In 2020, out of 207 subjects; 106 (51.2%) have been classified as the average risk of CRC, 86 (41.5%) have been classified as the moderate risk of CRC, and 15 (7.3%) have been classified as high risk of CRC. Conclusion: Although there was a decrease in the participation of the screening program with mobile applications in the pandemic era compared with paper-based questionnaires before the pandemic era, online screening using APCS in mobile applications is a preferred alternative for an effective screening method in this pandemic and possibly in the future in Indonesia.

Background: The Integrated Palliative Care Outcome Scale (IPOS) validly and reliably measures symptoms and concerns of those receiving palliative care. Aim: To determine the equivalence of the paper version with an electronic version of the IPOS (eIPOS). Design: Multicentre randomised crossover trial (NCT03879668) with a within-subject comparison of the two modes (washout period 30 min). Setting/Participants: Convenience sample of specialist inpatient and palliative home care patients aged over 18 years with cancer and non-cancer conditions was recruited. Scores were compared using intraclass correlation coefficients (ICC), Bland-Altman plots and via a mixed-effects analysis of variance. Results: Fifty patients were randomised to complete paper-electronic ( n = 24) and electronic-paper ( n = 26) IPOS with median age 69 years (range 24–95), 56% male, 16% non-cancer. The ICCs showed very high concordance for the total score (ICC 0.99, 95% CI 0.98–1.00), lowest ICCs being observed for symptoms ‘Appetite loss’ and ‘Drowsiness’ (ICC 0.95, 95% CI 0.92–0.97). Nine of seventeen items had ICCs above 0.98, as did all subscales. No statistically significant mode, order, age, and interaction effects were observed for IPOS total score and subscales, except for ‘Communication’ ( Fmode = 5.9, p = 0.019). Fifty-eight percent preferred the electronic version. In the group 75+ years, 53% preferred the paper version. Only three entries in the free-text main problems differed between the versions. Conclusion: The very high equivalence in scores and free text between the IPOS and the eIPOS demonstrates that eIPOS is feasible and reliable in an older palliative population.

Medical postgraduates are the new force of scientific research groups in China. However, the limitation of their English language ability restricts their publication of high-level Science Citation Index (SCI) papers to a large extent. Measures to improve students’ SCI language ability from macro, intermediate and micro aspects were discussed through flipped classroom teaching mode, such as students’ reading papers before class, students’ practicing paper writing after class, and teacher’s making comments in class. The feedback from the questionnaire showed that 96.65% of the students were satisfied with the teaching mode and 93.57% of them had improved their confidence in SCI writing. For the problems mentioned in the feedback, it was suggested that colleges and universities should formulate policies to encourage teachers to engage in medical English teaching, meanwhile teachers should constantly improve their professional quality, so as to help students improve their SCI language ability rapidly.

This work was developed within the scope of project i3N (LA/P/0037/2020. I.P. N. F. Santos thanks i3N for the BPD Grant BPD/UI96/5177/2020. S. O. Pereira thanks i3N for the BPD Grant BPD/UI96/5808/2017. The authors also thank Jonas Deuermeier for the XPS measurements. Publisher Copyright: © 2022 Elsevier Ltd Laser-induced graphene from paper (paper-LIG) was applied in non-enzymatic electrochemical sensing of uric acid (UA) in human urine. Paper-LIG was formed by CO2 laser modification of paper into a 3D graphene arrangement. Kinetic analysis of paper-LIG electrodes returned effective heterogeneous electron transfer standard rate constants of 1.4 × 10−3 cm s−1 and 7.8 × 10−4 cm s−1 for [Ru(NH3)6]2+/3+ and [Fe(CN)6]4−/3− redox probes, respectively. These electrodes were able to detect and quantify uric acid in PBS within the 10–300 μM range at pH between 5.6 and 7.4. At pH 7.4, a linear response (R2 = 0.999) from 10 to 250 μM was achieved, with a limit of detection of 3.97 μM and a sensitivity of 0.363 μA cm−2 μM−1. Paper-LIG electrodes denoted adequate selectivity in synthetic urine as well as in ascorbic acid (AA) and dopamine (DA)-containing electrolytes. Determination of urinary UA content in human samples returned a concentration of c.a. 1.8–1.9 mM, within the range for healthy individuals. Recoveries of samples spiked with 50 and 100 μM UA were 100.6% and 95.4%, respectively, with satisfactory reproducibility and stability. These cheap, lightweight, flexible, and eco-friendly paper-LIG biosensors for non-enzymatic quantification of UA in human urine pave the way to widespread application in the detection of other important biomarkers. publishersversion published

In the European Union (EU), Regulation (EC) 1935/2004 provides a harmonized legal EU framework and sets out the general principles for safety and inertness for all Food Contact Materials (FCMs) and Food Contact Articles. From a food safety point of view, however, specific EU legislation for paper and cardboard FCMs is lacking, while at Member State level, national legislation differs among countries. More than 11,000 chemicals have been identified in all types of FCMs, most of them without any information on toxicity or migration potential from FCM to food. The present review shows a wide variability of protocols, approaches, and conditions used in scientific studies, which are difficult to compare. In this regard, procedures and conditions laid down in EU legislation for plastics and European Standards (EN protocols) may serve as a good basis for the future sample preparation procedures in the framework of paper and cardboard FCMs safety assessment. Challenges on sample preparation procedures are presented involving the interlinked steps of sample preparation, conditions used and their impact in chemical analysis and in vitro bioassay testing. Currently, there is no general consensus on the criteria for structuring, evaluating, and tuning sample preparation procedures for paper and cardboard FCMs. For this purpose, a set of modified criteria and a decision tree are proposed based on the literature. Along this, mass transfer processes occurring in paper and cardboard FCMs and parameters affecting chemical migration need to be accounted for prior to reaching general consensus on criteria for sample preparation procedures.

With the overarching aim for the development of sustainable, nontoxic wet strength agents for paper, a novel polymer gel system based on oxidized hydroxypropyl cellulose (keto-HPC) cross-linked with polyamines was investigated in detail to gain a deeper insight into the wet strength mechanism. When applied to paper, this wet strength system significantly increases the relative wet strength by using only low amounts of polymer, and it is therefore comparable with established wet strength agents based on fossil resources, such as polyamidoamine epichlorohydrin resins. With the help of ultrasonic treatment, keto-HPC was degraded with respect to its molecular weight and further cross-linked in paper using polymeric amine-reactive counterparts. The resulting polymer-cross-linked paper mechanical properties were analyzed with respect to the dry and wet tensile strength, respectively. In addition, we analyzed the polymer distribution using fluorescence confocal laser scanning microscopy (CLSM). If high-molecular-weight samples are being used for cross-linking, we do find accumulation of the polymer mainly on the surface of the fibers and at fiber crossing points, accompanied with enhancing strong effects on paper’s wet tensile strength. In contrast, if low-molecular-weight (i.e., degraded) keto-HPC is being applied, the macromolecules are capable of entering the inner porous structure of the paper fibers, and almost no accumulation at the fiber crossing points is observed, which also results in a lowered wet paper tensile strength, respectively. This insight into wet strength mechanisms of the keto-HPC/polyamine system can thus lead to new opportunities for the development of alternative biobased wet strength agents where molecular weight dependence of the wet tensile properties allows for a fine tuning of mechanical properties in the wet state.

We consider a principal who periodically offers a fixed and costly nonmonetary reward to agents to incentivize them to invest effort over the long run. An agent’s output, as a function of his effort, is a priori uncertain and is worth a fixed per-unit value to the principal. The principal’s goal is to design an attractive reward policy that specifies how the rewards are to be given to an agent over time based on that agent’s past performance. This problem, which we denote by [Formula: see text], is motivated by practical examples from both academia (e.g., a reduced teaching load) and industry (e.g., “Supplier of the Year” awards). The following “limited-term” (LT) reward policy structure has been quite popular in practice. The principal evaluates each agent periodically; if an agent’s performance over a certain (limited) number of periods in the immediate past exceeds a predefined threshold, then the principal rewards him for a certain (limited) number of periods in the immediate future. When agents’ outputs are deterministic in their efforts, we show that there always exists an optimal policy that is an LT policy and also, obtain such a policy. When agents’ outputs are stochastic, we show that the class of LT policies may not contain any optimal policy of problem [Formula: see text] but is guaranteed to contain policies that are arbitrarily near optimal. Given any [Formula: see text], we show how to obtain an LT policy whose performance is within ϵ of that of an optimal policy. This guarantee depends crucially on the use of sufficiently long histories of the agents’ outputs. We also analyze LT policies with short histories and derive structural insights on the role played by (i) the length of the available history and (ii) the variability in the random variable governing an agent’s output. We show that the average performance of these policies is within 5% of the optimum, justifying their popularity in practice. We then introduce and analyze the class of “score-based” reward policies; we show that this class is guaranteed to contain an optimal policy and also, obtain such a policy. Finally, we analyze a generalization in which the principal has a limited number for rewards in any given period and show that the class of score-based policies, with modifications to accommodate the limited availability of the rewards, continues to contain an optimal solution for the principal. This paper was accepted by Jeannette Song, operations management. Supplemental Material: The online appendix is available at https://doi.org/10.1287/mnsc.2022.4482 .

In this work, the issue of applying water or a homogeneous aqueous suspension with a uniform size of (nano)particles (e.g., ink) to the surface of SBSK (southern bleached softwood kraft) paper with randomly arranged local hydrophobic treatment is investigated and then simulated. Based on the two investigated models, various simulation approaches were compared, an own simulation model was created, and its validity was subsequently demonstrated on the experiments performed.

The applicability of paper mulberry fiber (PM-FB), which is bast fiber, for manufacturing cellulose nanocrystals (CNCs) with high-yield was investigated. The PM-FB and hardwood bleached kraft pulp (Hw-BKP) were hydrolyzed under different sulfuric acid concentrations, reaction times, and reaction temperatures. The dependence of the CNC yield on the hydrolysis conditions and crystallinity of the raw materials was analyzed. The functional groups of the CNCs and their zeta potentials were determined. The fiber length and width of the individual CNCs were determined by transmission electron microscopy image analysis. The PM-FB showed a higher crystallinity of 86.8% compared to that of Hw-BKP and exhibited a high CNC yield of 55% under strong hydrolysis conditions. The sulfate group was introduced into the CNCs, which increased their negative charge. The fiber width of PM-FB-based CNCs (PM-CNCs) was larger than that of Hw-BKP-based CNCs (Hw-CNCs), and the aspect ratio ranged from 29.0 to 12.2 depending on the hydrolysis conditions. The yield of PM-CNCs was higher than that of Hw-CNCs under the same hydrolysis conditions. In addition, both CNCs exhibited similar quality. Therefore, PM-FB is a promising raw material for efficient CNC manufacturing.

Host immune activation is common under a pathogen invasion. This physiological response can promote changes in the body surface compounds, thus providing chemical cues related to health that might be useful to conspecifics. By recognizing the current immunological status of social partners, individuals can modulate their behavior to minimize the risk of infection. Tegument wounding, an immune elicitor, is a required step for many parasites to become established in a host. By using the neotropical eusocial paper wasp Mischocyttarus metathoracicus as a model organism, we first performed a lure presentation experiment in the field to test if wasps discriminate conspecific immunological status (experimentally manipulated by wounding) during on nest social interactions. Then, we performed gas chromatography–mass spectrometry analyses to test if immunostimulation by wounding alters the wasps’ cuticular hydrocarbon profile. We found that wasps reduce the duration of aggressive physical contact when interacting with wounded lures, despite displaying a similar frequency of inspective and aggressive behaviors toward both the wounded and the control lures. Besides, we found a subtle increase in a single cuticular hydrocarbon in the wounded wasps. Thus, wasps recognize conspecific immunological status, likely by chemical cues, and modulate their behavior in order to defend the colony against intruders while minimizing the personal risk of infection.

I trace the bibliometric evolution of “New Public Management Is Dead” by Dunleavy et al. to investigate how the seminal paper influenced the administrative reform debate. They suggested Digital-Era Governance as the main post-NPM idea. My bibliometric analysis discovers public value, administrative reform trajectories, and digital government as influential themes. Unlike Dunleavy et al., the literature found the managerial reform wave is not linear, reform ideas are supplementary, and NPM remains a major toolkit. Future research should focus on reintegration and need-based holism, linking digital government to administrative reform, and the negative impact of digital government on democracy.

In this work, we propose a new design for paper based analytical devices (PADs) that eliminate the need to use a micropipette for sample introduction. With this design, a PAD is equipped with a distance-based detection channel that is connected to a storage channel that indicates the volume of a sample introduced into the PAD. The analyte in the sample solution reacts with a colorimetric reagent deposited into the distance-based detection channel as the sample solution flows into the storage channel where the volume is measured. The ratio of the lengths of the detection channel and that of the storage channel (D/S ratio) are constant for a sample containing a certain concentration, which is independent of the introduced volume. Therefore, the PADs permit volume-independent quantification using a dropper instead of a micropipette because the length of the storage channel plays the role of a volume gauge to estimate the introduced sample volume. In this study, the D/S ratios obtained with a dropper were comparable to those obtained with a micropipette, which confirmed that precise volume control is unnecessary for this PAD system. The proposed PADs were applied to the determinations of iron and bovine serum albumin using bathophenanthroline and tetrabromophenol blue as colorimetric reagents, respectively. The calibration curves showed good linear relationships with coefficients of 0.989 for iron and 0.994 for bovine serum albumin, respectively.

A series of new coloring materials in nanoscale based on 5-(2-aminothiazol-5-yl) thiazol-2-amine and 5-(4-aminophenyl) thiazol-2-amine were synthesized. The nanoscale pigments were prepared using a grinding high˗energy ball-milling technique. X-ray diffraction and transmission electron microscopy were employed to determine the particle size of the nanoscale pigments (40–80 nm). The synthesized pigments in normal and nanoscale were applied in the printing of polyester fabrics. The fastness and colorimetric properties of the printed samples were carefully studied. Additionally, the synthesized pigments were applied as water-based flexographic ink for paper and carton. The hue of the color pigments L*, a*, b*, glossiness, and fastness to light were measured. The comparison of the new heterocyclic benzidine analogs in normal and nanoscale with commercial benzidine pigments demonstrated better results, particularly for the nanoscale pigments.

SummaryInhibitors of the cyclin-dependent kinases 4/6 (CDK4/6i) have been practice-changing and are now considered the standard of care in combination with endocrine therapy for the first- or second-line treatment in advanced hormone-receptor-positive, human epidermal growth factor receptor 2‑negative breast cancer. Recently, CDK4/6i have also emerged as an appealing targeted cancer therapy in early breast cancer, however results of large clinical trials are controversial. This position paper summarizes the evidence, and provides guidance for clinical practice.

Crohn disease (CD) is often complicated by bowel strictures that can lead to obstructive symptoms, resistant inflammation, and penetrating complications. Endoscopic balloon dilatation of CD strictures has emerged as a safe and effective technique for relieving these strictures, which may obviate the need for surgical intervention in the short and medium term. This technique appears to be underutilized in pediatric CD. This position paper of the Endoscopy Special Interest Group of European Society for Pediatric Gastroenterology, Hepatology and Nutrition describes the potential applications, appropriate evaluation, practical technique, and management of complications of this important procedure. The aim being to better integrate this therapeutic strategy in pediatric CD management.

Patients with multimorbidity increasingly impact healthcare systems, both in primary care and in hospitals. This is particularly true in Internal Medicine. This population associates with higher mortality rates, polypharmacy, hospital readmissions, post-discharge syndrome, anxiety, depression, accelerated age-related functional decline, and development of geriatric syndromes, amongst others. Internists and Hospitalists, in one of their roles as Generalists, are increasingly asked to attend to these patients, both in their own Departments as well as in surgical areas. The management of polypathology and multimorbidity, however, is often complex, and requires specific clinical skills and corresponding experience. In addition, patients' needs, health-care environment, and routines have changed, so emerging and re-emerging specific competences and approaches are required to offer the best coordinated, continuous, and comprehensive integrated care to these populations, to achieve optimal health outcomes and satisfaction of patients, their relatives, and staff. This position paper proposes a set of emerging and re-emerging competences for internal medicine specialists, which are needed to optimally address multimorbidity now and in the future.

Literature review papers are highly influential in directing academic discourse, not only because they map the state of the art in a subject area, but also because they show future research prospects by identifying weaknesses, limitations, and gaps in the extant body of knowledge on a particular subject [...]