Search

An electrical tree discharge model of multilayer insulation paper was prepared, and a voltage of 20 kV was used for electrical tree cultivation and initiation tests. Based on the microscopic image information and partial discharge (PD) information during the aging of the electrical tree, the development of electrical tree discharges between layers of paper comprising epoxy resin-impregnated paper insulation was studied. The results show that, by analysing PD information such as the discharge volume phase spectrum and the discharge repetition rate phase spectrum, the development of the electrical tree branch progresses in four stages: initial, growth, stagnation, and bursting. During the growth and stagnation stages, the main discharge paths of the electrical tree are mainly formed, and there are many filamentous fibres on the path edge. During the burst stage, more branches will be formed on the electrical tree, which will cause the greatest damage to the insulation. With the extension of the electrical tree path, the discharge magnitude and discharge times also increase. There are specific discharge patterns in different growth stages of the electrical tree, and the number of discharge events in each positive half-cycle is significantly greater than that in a negative half-cycle. Combining the microscopic image information and PD information during the aging of such an electrical tree, a theoretical basis for evaluating insulation state by PD monitoring is realised. The long-chain molecules of cellulose and epoxy resin break bonds and oxidise, which decompose into a large number of free radicals, monosaccharides, and other low-molecular-weight products.

The industry of disposables has undergone a huge revolution in this century owing to the busy lifestyles and technological advancements in its production and manufacturing process. Paper cups are one of the widely used products in disposable industry. It has multi utility options that is it can be used to drink water as well as beverages, soups, liquids etc. This paper entirely focuses on increasing the quality factor of production and manufacturing process of these paper cups by adding additional circuitry to the existing machinery to reduce waste of raw materials as well as the per unit cost involved in wastage of electricity. This research work is based on using proximity sensors to sense the materials and molded paper cups infront of machinery and reduce the electric wastage through a relay Mechanism assembly. This is a PLC based live project example of effectively increasing the overall efficiency of the manufacturing plant

This paper describes approaches to the use of wearables and related monitoring and diagnostic tools to glean and present data to patients and their caregivers in the form of Personal Health Dashboard. Raw data from devices such as fitness watches, blood glucose and blood pressure monitors can be analyzed by machine learning algorithms ensembles over the cloud or at the edge, and the resulting patterns can be presented to allow for actionable responses. The advent of low-cost computational, sensing, monitoring and diagnostic tools allow for cost-effective solutions that can have wide adaptability. The paper draws from prior and ongoing research conducted by the team to present these positions in the advancement of healthcare.

The economy of the paper industry largely depends on the quality of the paper manufactured and the quality depends on the precise operation of Headbox, which is the key element of the paper machine and is highly responsible for the quality of the paper manufactured. Being a nonlinear multivariable system, a headbox needs to be controlled efficiently to have the desired response which in turn reflects in the quality of the paper. The headbox is subjected to various disturbances and thus it is required not only to suppress the effect of disturbances but also to ensure the smooth start of the headbox and fast response to the set-point changes. A control technique is proposed in this paper for a paper machine headbox based on the determination of ultimate gain and frequency using the fractional-order integrator (FOI). The PID tuning technique proposed has been applied on paper machine headbox and the responses are compared with the existing techniques.

Using a new opinion dynamics using the polarity analysis of measured data of Twitter about "toilet paper" and "COVID-19", we analyzed the chain of fear that people feel for the rumor of lack of toilet paper and COVID-19 itself. We use opinion dynamics for the analysis of the fears, and we obtain the opinion distribution of the fear calculated using the opinion dynamics and the observed distribution. By comparing the two distribution, we found that the opinion distribution for the fear is consisted with the mixture of trust and distrust.

With the deepening of cultural and artistic exchanges in various countries, many local arts actively or passively absorb the nutrients of foreign art, but the folk paper-cut art of northern Shaanxi and Mexico completely preserve the regional cultural characteristics of the nation. This paper studies the difference and connection between northern Shaanxi paper-cut and Mexican paper-cut by means of semantic analysis and contrastive demonstration. This paper analyzes the theme expression and art types of paper-cut and Mexican paper-cut in northern shaanxi, and collates the rich connotation culture contained in paper-cut patterns and the paper-cut culture of the sustainable development of northern shaanxi and Mexico bearing the message of ancient tu Teng worship, showing a unique artistic connotation. The precipitation of experienced also reflects the application and inheritance in today’s society.

Chinese folk paper-cutting has a long history of development, and it is a major folk art form created by the working people of all ages in our country in order to meet the needs of material and spiritual life, and Return lived in it. It has become a design art rooted in the folk, and it is entrusted with the beautiful expectation of the broad working group from life. Plane composition is a very important part of modern design foundation. Points, lines and surfaces are not only the basic elements of plane composition, but also create a colorful environment atmosphere through the artistic treatment of points, lines and surfaces in different indoor environment designs. Many artistic inspirations of modern design come from folk paper-cutting, and we get creative inspiration and enlightenment from the structure and composition of paper-cutting. By studying the comparison between folk paper-cut art and modern graphic design, this paper tries to provide an innovative way for modern graphic design.

The fabrication and characterization of a paper and pencil based resistive touch sensor is carried out in the present work. The sensor detects the effective change in the resistance, when the finger is placed on it. An ash less, low cost, easy to access, bio-degradable, flexible, light weight, easy to fabricate and ultra-thin sensor is developed by drawing interdigitated graphite electrodes on the Whatman filter paper of grade 42. Change in the resistance is due to the path created for flow of electrons, when the finger is placed. Current versus time and $\Delta$ R/Ro versus time characterization of fabricated device is done using Keithley 2450 source meter. Response of the device has made noticeable changes for the finger contact. The measured resistance of the non-touch and touch is found to be 80.154 M $\Omega$ and 4.748 M $\Omega$ respectively. This huge change in resistance is sufficient to detect the touch. The performance and sensitivity of the proposed sensor are evaluated using the test circuit and smart switch is developed on paper substrate.

This paper presents the main disadvantages of receipts printed on thermal paper, underlining the impact that BPA (component of thermal paper) has on the environment and human health. The conceptual solution proposes to use the near-field communication (NFC) protocol available in smartphones, integrating a virtual receipt printing device (called e-receipt) at the end of the contactless payment chain.

Prologue: This paper is written after numerous focus-group meetings with several types of people/experts of many genders. Statements given under are not meant to be insulting any gender, but these are focus-group observations. If you do not like any such statements, we are sorry in that you have missed the points we are trying to convey. This paper addresses various perceptions on genders that concerns abstract entities such as various disciplines of studies. This paper defines genders for disciplines through historical biases and perceptions – e.g., birth, religion, language, region, brought up, to say a few; these were obtained thru’ several focus-group discussions. However, technologies, such as computers, the World Wide Web (WWW), Moodle, sensor networks, Internet of Things (IoT), Virtualization and Immersion technologies are constantly changing the nature of education and learning. As a consequence, and through a series of arguments, we establish that the genders of many popular disciplines are becoming feminine in nature. We also define two terms, namely, Gender Capital and Gender Capitalization, through which respectively one could possibly define and analyze ways and means by which the changing nature of genders of disciplines can be profitably exploited for the global goodness.

With the rapid growth of scientific publications, research paper recommendation which suggests relevant research papers to users can bring great benefits to researchers. In this paper, we focus on the problem of recommending conference papers to the conference attendees. While most of the related existing methods depend on the content-based filtering, we propose a unified conference paper recommendation method named $CPRec$ , which exploits both the contents and the authorship information of the papers. In particular, besides the contents, we exploit the relationships between a user and the authors of a paper for recommendation. In our method, we extract several features for a user-paper pair from the citation network, the coauthor network, and the contents, respectively. In addition, we derive a user’s pairwise preference towards the conference papers from the user’s bookmarked papers in each conference. Furthermore, we employ a pairwise learning to rank model which exploits the pairwise user preference to learn a function that predicts a user’s preference towards a paper based on the extracted features. We conduct a recommendation performance evaluation using real-world data and the experimental results demonstrate the effectiveness of our proposed method.

The industry of disposables has undergone an astronomically immense revolution in this century owing to the diligent lifestyles and technological advancements in its engenderment and manufacturing process. Paper cups are one of the widely used products in disposable industry. It has multi utility options that is it can be acclimated to imbibe water as well as beverages, soups, liquids etc. This paper entirely fixates on incrementing the quality factor of engenderment and manufacturing process of these paper cups by integrating adscititious circuitry to the subsisting machinery to truncate waste of raw materials as well as the per unit cost involved in wastage of electricity. There is a necessity to improvise the quality of overall production parameters using automation techniques. Replacing the whole machinery is a very high costing implementation hence economic feasibility of automation can be achieved by adding an additional circuitry and improving the overall perfoemance. This research work is predicated on utilizing proximity sensors to sense the materials and molded paper cups in front of machinery and minimize the electric wastage through a relay Mechanism assembly. This is a PLC predicated live project example of efficaciously incrementing the overall efficiency of the manufacturing plant

We often point to the relative increase in the amount and sophistication of evaluations of visualization systems versus the earliest days of the field as evidence that we are maturing as a field. I am not so convinced. In particular, I feel that evaluations of visualizations, as they are ordinarily performed in the field or asked for by reviewers, fail to tell us very much that is useful or transferable about visualization systems, regardless of the statistical rigor or ecological validity of the evaluation. Through a series of thought experiments, I show how our current conceptions of visualization evaluations can be incomplete, capricious, or useless for the goal of furthering the field, more in line with the “heroic age” of medical science than the rigorous evidence-based field we might aspire to be. I conclude by suggesting that our models for designing evaluations, and our priorities as a field, should be revisited.

Our understanding of COVID-19 pandemic epidemiology has many gaps, with many challenges arising on a global scale. This paper looks at the problem at a smaller geographical scale, the extent of the campus of a large organization. Equipped with an asymptomatic testing program and rough location data from the campus wireless network, we make the case that epidemiological models may be informed from this new source of data, which offers fidelity at the temporal resolution of seconds and spatial resolution of a Wi-Fi cell size, in particular for the tasks of pinpointing clusters of cases and contexts of infection transmission. We sketch the design of a system that fuses the two foregoing information streams and explain how the result can be incorporated into standard epidemiological models of communicable disease, both for better parameter estimation in elementary models, as well as for providing spatial inputs into more sophisticated models. We conclude with logistical and privacy considerations we have encountered in an associated ongoing study, to inform similar efforts at other organizations.

The pervasive use of software systems and current threat environment demand that software systems not only survive cyberattacks, but also bounce back better, stronger, and faster. However, what constitutes a modern software system? Where should the security and resilience mechanisms be-in the application software or in the cloud environment where it runs? In this concept paper, we set up a context to pose these questions and present a roadmap to answer them. We describe challenges to achieving resilience and beyond, and outline potential research directions to stimulate discussion in the workshop.

Our proposed method focuses on offline friends who are acquainted with a target user in the real world. We use Density-Based Spatial Clustering of Applications with Noise (DBSCAN) to distinguish between online friends of a target user who are also offline friends and online friends who are acquainted with the target user only in cyberspace. By utilizing the probability of friendship as a function of the geographical distance between users’ home locations, our proposed method achieves an estimation accuracy 1.7 percentage point better than that of a conventional method. We have also been able to verify the effectiveness of an optimization method that narrows down candidate areas for a target user’s home location.

Academic papers is an important means to test students’ mastery of basic knowledge and professional ability. The quality of academic papers, on the one hand, is relected by the innovation and prefessionalism of content. On the other hand, the normalization of documents is an important index. In order to solve the problem of low efficiency that the paper standardization inspection is basically completed by manual work. This paper proposes an automatic detection framework based on document rule tree (DRT) and can solve the problem well. The practical application results show that good results have been achieved in terms of accuracy and query efficiency.

Critical flaws continue to exist at the level of domain, requirement, and/or design specification, and specification verification (i.e. to check whether a specification has desirable properties) is still one of the most important challenges in software/system engineering. CafeOBJ is an executable algebraic specification language system and domain/requirement/design engineers can write proof scores in CafeOBJ for improving quality of specifications by the specification verification. This paper describes advances of the proof scores for the specification verification in CafeOBJ from the author’s point of view.

Massive Open Online Courses (MOOCs) have recently gained a lot of attention as a new e-learning paradigm. Despite its widespread use, the high percentage of students who do not use it raises concerns among institutions in developed countries who have spent considerable time and money developing it. As a result, it is critical to comprehend the variables that affect students' decisions to take MOOCs. This paper proposes a conceptual framework for assessing MOOC acceptance among students in Nigerian higher education institution, and it expands on the technology acceptance model (TAM). Five constructs and two moderators are identified and hypothesized and synthesis of related prior literature: perceived usefulness, perceived ease of use, reputation, subjective norm, facilitating condition, and technology awareness. The suggested conceptual framework in this research enriches existing literature on student’s intention to use MOOCs.

In modern academic social network, it is very difficult for scholars to find academic papers consistent with their research direction. Time is a critical factor in paper recommendation. As time goes on, the impact of an academic paper would gradually fade. Likewise, the research interests of users may also change. Therefore, we propose a temporal perceptual neural collaborative filtering model that integrates the multi-dimensional features of papers. We conducted our experiments on the dataset from CiteULike, comparing the recommended results by using four time-decay functions and evaluating our model with multiple evaluation indicators. The satisfactory results show that our model is effective in filtering out the expired papers by considering the characteristics of papers and the changes of scholars' interests.

In the existing generation the creation of cutting-edge technological devices has captured the attention of worldwide populace. The dependency of humans on those technological devices and offerings supplied through. This has reached at such stage that, without those, they can’t suppose a step ahead with inside the route in their growth. The point of dependency is key to dependency of the tech-gadgets and offerings. Teenagers are the maximum number of populaces to be hooked on technology. The look at changed into designed to look at using tech-gadgets through teenagers i.e. the time spent with the devices, the functions at the back of use, and its influences on intellectual fitness and existence fashion. Using based questionnaire, unstructured interviews and statement through the researcher, number one records have been accumulated from a hundred and fifty respondents of Klang Valley. Findings of the look at confirmed that maximum of the teenager respondents spend a huge quantity in their time with their tech-devices and offerings supplied through them. The functions of use in maximum instances are delight pushed as opposed to necessity pushed. Again, it is famous that dependency to tech-gadgets has many bad influences at the components referring to intellectual fitness of the respondents and has end up a causal component with inside the alternate of existence fashion of younger participants. The effects are interpreted primarily based totally at the present day theories and implications for destiny are pointed out.

Examination plays a vital role in all over the world. To test the knowledge and ability of a student, examination is the elementary method. For examination, a teacher has to create sets of question paper as per the institutions or university. It is challenging for the teacher to prepares the question paper, and it takes lots of time for educator. Due to huge efforts, sometimes it leads to human fault. The proposed of this project is easy to prepare the question paper process using the bloom's taxonomy and random package. To create the high quality of question paper, it covers six hierarchical levels of bloom's taxonomy. Question will separate in the database based on section wise and user can easily add the question in the database. After clicking generate button the question paper will automatically generate in PDF format and send to the teacher.

Much of the literature on the link between reliability and safety—especially that written by Ron Moore, whose work is referenced throughout this paper—shows that the more reliable a plant or facility is, the safer it is. This presentation will present the unique connection between reliability and safety from a professional reliability engineering perspective. When asked, “who is responsible for safety?”, most organizations have done a great job of having the consensus answer be “everyone.” This paper serves as reinforcement of the linkage between safety and reliability, that organizations of the future might encourage their members to answer to question “who is responsible for reliability” in the same way: everyone.

The Occupational Safety and Health Administration (OSHA) uses the term “employee in charge” 12 times in their regulations. The National Fire Protection Association (NFPA) Standard for Electrical Safety in the Workplace, 70E® uses the terms “employee” or “person in charge” 28 times. The National Electrical Safety Code (NESC) uses the term seven times. The term is important in all three documents, yet none of them define it. This paper offers an analysis of the use of the term in these documents, and details why that role is critical to safe work practices on or near electrical conductors and circuit parts, with particular focus on its function in high voltage work.

The electrical industry has greatly evolved over the past several decades. Originally, there was no such thing as a “safety culture”. Now, hundreds of the industry's leading minds show up annually for a full week to learn, listen, and exchange ideas for stopping electrical incidents and injuries in the workplace. Under normal operations, most companies have adopted the “Safety First” mantra. In 2020, the world was faced with something it had never seen before; a modern-day pandemic. This completely changed the way that we here in the United States were able to conduct business. When circumstances change so rapidly even on a day to day basis and people's businesses and the ability to support their families are put on the line, is safety still first? In this paper, we will discuss the struggles of operating a business and keeping employees as safe as possible during the 2020 SARS-CoV-2 (severe acute respiratory syndrome coronavirus 2) (COVID-19) Pandemic. We linked with other professionals and centers of excellence from around the world in the electrical sector to advance our mission of a Safety-First culture. The innovations required involved human performance best practices to overcome these substantial barriers to everyday work tasks. The US Department of Homeland Security deemed the Energy Sector as critically essential. They stated, “The U.S. energy infrastructure fuels the economy of the 21st century. Without a stable energy supply, health and welfare are threatened, and the U.S. economy cannot function [1].” The electrical industry could not shut down in this crisis. Our industry needed to adapt, in real-time, to the environments they were in. Engineers, technicians, and electricians dealt daily with this new hazard that they could not see, interestingly not unlike electricity. The ongoing respect for electricity that our employees have always had, along with the ability to adapt quickly in innovative ways made it possible to still provide this essential work to keep the country moving.

Examination performance is the only measure of competence in the existing education system of India. Question paper is the primary tool used in an examination, the quality of question paper plays an important role in a student’s future. Hence, any individual should take utmost care while framing the question paper. However, setting up a good question paper for assessment is not a straightforward task, particularly when students come from different backgrounds and intellect. So parameters which need to pay attention are fairness, consistency, novelty and elimination of bias while selecting questions in the question paper. This paper explores the possibility of using knowledge graph technology and deep learning. Knowledge graph in particular, addressing syllabus fairness and deep learning for novelty check. The objective is to propose a feasible framework, taking into consideration several aspects. These aspects are: to meet at least three levels of bloom taxonomy, support of course outcomes (CO) and Program Outcomes (PO) attainment. They are achieved by judging syllabus fairness, support for judging more spontaneous answering potential with novelty checks. The prototype implemented using this framework showed promising results motivating for further research.

Every environment and tool in our lives has been increasingly digitized: watches, cameras, books, magazines, and other stationery goods. Most basic necessities are integrated into a smartphone. The digitization of our live has greatly contributed to the increased convenience. Yet, there are also lost attractions due to digitalization. For instance, people choose analog records for the pursuit of the sound quality and its design, rather than convenience. There are still so many unwelcoming the digitization of living environments and tools. A typical example is "books". While in recent years e-books are rapidly becoming widespread, many people choose "paper books" to enjoy reading. Part of the reason is assumed that reading books is not just about absorbing the information written in them, but it is about enjoying a sense of touch when turning the pages. In this research, we focus on "a sense of physical touch", the feeling of actually turning the pages of a paper book. We also design software and devices that provide users with a "sense of physical touch", often lost when reading an e-book on a smartphone.

Research articles especially those in science and technology fields are verbal presentation of scientific and technological innovations. Their publication can help promote the application of science and technology. Highly cited research papers are regarded as the best and the most representative ones of the concerned research field. CGA model is quite mature in theory but not widely used at the moment. To explain and demystify the ways and reasons of the construction of research papers, a three-space model involving textual space, socio-pragmatic space and socio-cultural space operating at the four levels of discourse realization was proposed by Bhatia. It can be used to analyze professional academic research papers. In this paper, a critical genre analysis of 28 highly cited research papers on authentication schemes reveals problem-solution structure is adopted in these papers. The art tradition of cryptography forms the foundation of the way schemes are designed. Practicality and application requirement in daily life are the reasons that researchers advertise the superiority of their proposed schemes.

The modern HPC scientific software ecosystem is instrumental to the practice of science. However, software can only fulfill that role if it is readily usable. In this position paper, we discuss usability in the context of scientific software development, how usability engineering can be incorporated into current practice, and how software engineering research can help satisfy that objective.

Atomic Bonded Cross-chain Debt (ABCD) is the first non-custodial smart-contract-independent cross-chain atomic bond. Theoretical aspects of ABCD have been presented in the International Conference on Blockchain Technology and Applications (ICBTA) and won the best presentation award. It is the first time a demo of Atomic Bonded Cross-chain Debt is presented.

Blockchains (BCs) received significant attentions from FinTeh in recent years. Many proof-of-concepts (POCs) projects and experiments have been carried out to explore the strengths and weaknesses of constructing financial market infrastructures upon BCs. The experiments showed that considerable improvements are still necessary to meet financial requirements such as safety, efficiency, reliability, scalability, security and transparency. The Principles for Financial Market Infrastructure (PFMI), issued by the Committee on Payment and Settlement System (CPSS) and International Organization of Securities Commissions (IOSCO), is a key standard for designing Financial Market Infrastructures (FMIs) so that global financial markets could be more robust and stable, especially, could withstand financial shocks. It is thus necessary to design BC-based FMIs according to PFMI. This position paper analyzes financial system requirements and the challenges, and discusses the design issues of BCs in meeting PFMI.

Electrical workers are fatally injured from multiple causes and electrical work is a subset of all occupational electrical fatalities. This work is a state by state comparison of 2011-2018 US Bureau of Labor Statistics (BLS) fatal occupational injury statistics for workers classified as “electricians.” The top state 2011–2018 BLS fatal occupational injury statistics illustrate that the BLS fatal injury data for electricians generally reflects the state fatal occupational injury data for all workers. State licensing requirements for electricians demonstrate that the eleven states which require a formal apprenticeship or education are among those states with lower fatal injury rates for electricians. Correlations and implications are also explored between “electrician” fatal injuries and: 1) state licensing and continuing education requirements for electricians and electrical contractors; 2) OSHA-approved state plans; and 3) state political ideology. Fatal electrical accident records from 2011-2018 OSHA accident reports which involved electrical work are discussed for the states which did not record any electrician work fatalities. How to reach electricians in higher risk states and how to reach non-qualified workers who do electrical work are addressed.

The study related to pharmaceutical packaging has come to attention for its importance to the quality of drugs and compliance achievement. The aims of this study is to provide a conceptual view of producing a new model of pharmaceutical drug packaging design to overcome existing problems. The proposed methods for this research is to use the process mining techniques to support the construction of a new model for pharmaceutical packaging design process improvement. A case study method was selected for the methodology of the research resulted the flow of packaging design process in pharmaceutical company. The study lengthens the knowledge of drug packaging design process and concludes the importance of drug packaging design process to be investigated for compliance fulfilment purposes. This study is significant to the strong implication of drug quality and safety outcomes for the patients.

One of the rising stresses of human life is over prosperity and wellbeing. Undeniably, prosperity and sustenance are one of the huge pieces of life. As such, mechanical progressions to help overhaul and even development prosperity care is key. In this Paper, We will look at changed framework dependent on a couple past assessment work done by significant scientists. By the strategies for that, we can orchestrate the right food as demonstrated by our lifestyle.

In this article we are presenting a state of the art in the Artificial Intelligence (AI) and Robotics fields, so as to address the problem of autonomy and integration of autonomous heterogeneous systems for decision making autonomy. This state of the art is followed by the presentation of some avenues addressing the issue in order to lead the autonomy of heterogeneous robotic systems in the naval defence environment possible.

The Plenary Session begins with welcome remarks and introduction from the Conference Chair, Kevin Zhang, followed by the Technical Program Chair, Makoto Ikeda, providing an overview of ISSCC 2021. The Plenary Sessions (1A and 1B) will feature four distinguished keynote speakers. In line with the Conference theme “Integrated Intelligence is the Future of Systems,” the plenary presentations will address important innovation trends that are paving the path forward in this emerging era of Integrated Intelligence. This year, with the virtual format, an Awards Ceremony video will be posted that recognizes major technical and professional accomplishments presented by the IEEE, Solid-State-Circuits Society (SSCS), and ISSCC.

An important branch in quantum computing involves accurate resource estimation to assess the cost of running a quantum algorithm on future quantum hardware. A comprehensive and self-contained workflow with the quantum program in its center allows programmers to build comprehensible and reproducible resource estimation projects. We show how to systematically create such workflows using the quantum programming language Q#. Our approach uses simulators for verification, debugging, and resource estimation, as well as rewrite steps for optimization.

The assignment of reviewers to papers is one of the most important and challenging tasks in organizing scientific conferences. Its accuracy has a direct impact on the quality and the fairness of the review process. The accuracy of the automatic assignment depends on both the assignment algorithm and the way similarity factors between papers and reviewers are calculated. This paper proposes an architecture and a working model of a software tool for accuracy evaluation of the calculated similarity factors between papers and reviewers. It has been used over a hundred times and proved to be very useful for evaluation and comparative analysis of existing methods of describing papers and reviewers' competences.

According to the Canadian Science Publishing, there are approximately 2.5 million scientific papers published each year. The huge volume of publications can be contributed to a substantial increase in the total number of academic journals, including the increasing number of predatory or fake scientific journals, which yield high volumes of poor-quality research work. The effect of this scenario is that there is an obsolete jungle of journals to flip through in searching for high-quality and relevant references for researchers, ranging from the ones who simply look for citations to cite or latest development and knowledge in a specific scientific area of study. In solving this problem, we propose a unique, elegant research paper recommender. Besides considering the topics and contents of related publications, our recommender also examines the peer reviews, authority, and popularity of each publication to ensure its quality. Conducted empirical study shows that our recommender outperforms existing research paper recommenders and contributes to the design of searching relevant publications.

This conceptual paper argues that perceived usefulness, perceived ease of use, and attitude are insufficient in explaining online health information seeking patterns among women. Building on the technology acceptance model, this paper presents socio-economic status/income as a direct influence on the attitude that web users have towards searching for health-related information on the internet. This newly added socio-demographic construct offers an understanding of how social factors can determine attitude towards online health information-seeking behavior. The paper conceptualizes socioeconomic status as another factor that has a direct influence attitude, thus influencing women's decision to use or not to use online health-related content. This study highlights the implications of the positive attitude of women towards online health-related content which sometimes does not translate into the actual use of online health-related information. Thus, by introducing income as a limiting or motivating factor, it helps to explain how the affordability of access to the internet might explain why women have a positive attitude towards the internet through their perceptions of its usefulness and ease of use and yet decide not to utilize it.

Which are the segmentation algorithms proposed during 2018-2019 in CVPR that have CNN architecture?’ Answering this question involves identifying and analyzing the deep learning architecture diagrams from several research papers. Retrieving such information poses significant challenge as most of the existing academic search engines are primarily based on only the text content. In this paper, we introduce Diag2Graph, an end-to-end framework for parsing deep learning diagram-figures, that enables powerful search and retrieval of architectural details in research papers. Our proposed approach automatically localizes figures from research papers, classifies them, and analyses the content of the diagram-figures. The key steps in analyzing the Figure content is the extraction of the different components data and finding their structural relation. Finally, the extracted components and their relations are represented in the form of a deep knowledge graph. A thorough evaluation on a real-word annotated dataset has been done to demonstrate the efficacy of our approach.

According to the Canadian Science Publishing, there are approximately 2.5 million scientific papers published each year. The huge volume of publications can be contributed to a substantial increase in the total number of academic journals, including the increasing number of predatory or fake scientific journals, which yield high volumes of poor-quality research work. The effect of this scenario is that there is an obsolete jungle of journals to flip through in searching for high-quality and relevant references for researchers, ranging from the ones who simply look for citations to cite or latest development and knowledge in a specific scientific area of study. Querying existing web search engines and research paper archived websites is not the solution to the problem, since they are m-equipped to suggest high quality publications to meet the users’ information needs. In solving this problem, we propose an elegant research paper recommender, which is unique compared with existing ones, since besides considering the topics and contents of related publications, it also examines the authority and popularity of each publication to ensure its quality. Conducted empirical study shows that our recommender outperforms existing research paper recommenders and contributes to the design of searching relevant publications.

Plastic bags have been introduced in the middle of 19th decade and it's received a huge popularity amongst the consumers and retailers. Around the world, numerous plastic plants are manufacturing tons of plastic bags which are very commonly used by the society because of its comfort, cheapness and handiness. But the adverse impact of plastic is certainly not highlighted or not openly debated in a serious tone. The negative impact of the plastic in the environment made many counties to ban it due to public concern. Specifically, in Agri dominant countries, such as Bangladesh, India, Pakistan, South Africa, etc., the government has taking stringent efforts towards the prevention of single ended plastic. Since, plastic bags are not bio-degradable, the only way to get rid of them is to burn up which discharges the toxic fumes into atmosphere. Dumping of plastics at the soil will also results in degradation of soil quality and makes it as an unfit to the agriculture. The domestic animals will take the plastic papers as food which will lead to their death. An ultimate solution to the above said problem is the replacement of paper bags, in the place of plastic bags. The cost, ease, availability and load carrying capacity are the main factors restricting the use of paper bags among the public. Only Few manufactures are available in the field and due to the cost of machineries, complexity of production, availability of raw materials, man power and electricity demand results in higher cost which becomes as a barrier among the common man in the adoption of paper bags. In this paper, a cost effective, portable, solar powered paper-bag making machine is proposed to produce paper-bags. The proposed design will minimize the usage of plastic bags and assist in the motto of a clean and safe society. The machine is capable of handling different sizes and textures of the paper. It also has the provision to control the speed of production and monitor the quality of the output. The bags are tested for standard conditions and were found to have enough strength to replace 20-micron plastic bags.

In many fields, a mass of algorithms with completely different hyperparameters have been developed to address the same type of problems. Choosing the algorithm and hyperparameter setting correctly can promote the overall performance greatly, but users often fail to do so due to the absence of knowledge. How to help users to effectively and quickly select the suitable algorithm and hyperparameter settings for the given task instance is an important research topic nowadays, which is known as the CASH problem. In this paper, we design the Auto-Model approach, which makes full use of known information in the related research paper and introduces hyperparameter optimization techniques, to solve the CASH problem effectively. Auto-Model tremendously reduces the cost of algorithm implementations and hyperparameter configuration space, and thus capable of dealing with the CASH problem efficiently and easily. To demonstrate the benefit of Auto-Model, we compare it with classical Auto-Weka approach. The experimental results show that our proposed approach can provide superior results and achieves better performance in a short time., 12 pages, 3 figures

With the mutual integration of computer technology and education, promoting the reform of education and teaching network, online examination mode has gradually become an important means of new education measurement. The online examination system has basically realized the examinee answer, check and system group, and other functions, but there is a set of performance is not high, the examination such as the imperfection of the auxiliary function, in view of the above problem, this paper analyzes the group's related theory, using genetic algorithm as a smart group volume is determined, and genetic operation process of the group to carry on the design and improvement; At the same time, the system function and framework technology are deeply analyzed, the system function framework is established, and the intelligent test system is finally realized.

Extreme environmental conditions can alter the surface properties of insulator surfaces, causing a temporary or permanent loss of hydrophobicity. Biological contamination such as algae, fungi, and lichen decrease the flashover performance of the insulator and this creates a potential threat to safe operation of the power systems. This biological contamination, which poses a major challenge in the operation of electrical power systems, decreases the flashover performance of the insulator and could result in complete failure thereof. The bio-films also possess the ability to retain water on the insulator surface, which results in increased leakage current levels under wet conditions. These leakage currents, caused by the biological contamination, are also considered to be one of the most severe problems regarding insulators in service, thus causing the formation of dry band arcing which could result in a flashover that could cause a power outage. This paper presents a consideration of some of the factors of climate parameters such as humidity, pollution, high temperature, ultraviolet exposition, sunlight, atmospheric pressure and biological degradation, which cause microorganisms in the air and microbial growth on insulator material surfaces.

On internet, there are plenty of social networking sites on which people express their perception regarding a topic every day which can be helpful for sentiment analysis. In this paper, we have discussed the general procedures in sentiment analysis and how we are going to use python and its libraries for performing sentiment analysis on data retrieved from twitter’s website so we can get the view of what public thinks of last ten government decisions like Demonetization, Goods and Service Tax (GST), Bharat Interface for Money (BHIM), Citizen Amendment Act (CAA).

Speech imitation, that is, the method of converting a source speaker’s utterance in a manner such that it sounds as though it were uttered by the target has been an active and volatile area of research in current times. The paper focuses on the techniques of modifying sounds emitted by the original speaker (also called the source). Speech Imitation involves metamorphosing the source speaker’s speech to present it in a way as though it were produced by the selected speaker (also called the target). Most systems specializing in speech imitation compulsorily necessitate the usage of parallel data to construct natural or unprocessed sounding speech. Examples of such systems would include RBM [1]. However, there are various obstacles associated with parallel data such as it being an arduous task to gather in real-time and the requirement for the vocabulary to be an exact match which perhaps might not be available to train the model. To remove such dependency on parallel data, a recently innovated model, GANs [3] are being explored.

In education field, the importance of education system is the part of the most significant aspect of our social orders at all levels. Thus, a student's performance can only be tested by providing them with an examination or assessment. Examinations are very crucial as it is an activity which is performed to evaluate the performances of students. Besides students performances, the quality of the examination questions prepared would also determine the quality of the students but the most important yet challenging task is the creation of the examination questions paper which is known to be very tedious, time consuming and expensive therefore it should be prepared with full focus, right formatting and with the right selection of questions.