Search

The NIST selection process for standardizing Post-Quantum Cryptography Mechanisms is currently running. Many papers already studied their theoretical security, but the resistance in deployed device has not been much investigated so far. In particular, fault attack is a serious threat for algorithms implemented in embedded devices. One particularly powerful technique is to use safe-error attacks. Such attacks exploit the fact that a specific fault may or may not lead to a faulty output depending on a secret value. In this paper, we investigate the resistance of various Post-Quantum candidates algorithms against such attacks.

Most insulation in the power transformers consists of oil and cellulose (paper/pressboard). Mineral oil has been used as an insulating liquid for over a hundred years. However, mineral oil is a non-biodegradable oil and has a serious impact on the environment and the non- renewable energy resources. Therefore, it is important to replace this oil with another alternative insulating liquid, and PFAE was introduced in the year 2006 in Japan. In addition, the ability of an insulating system also depends on the thickness of the monomolecular cellulose fiber on the kraft paper. Hence, it is necessary to determine the appropriate thickness of kraft paper for use as an insulator on the power transformer for this type of oil. This project presents paper-oil (PFAE) charging and discharging current characteristics. The study was carried out through the implementation of experiments in the laboratory. Polarization and Depolarization Current (PDC) test has been carried out to test the conductivity and response function of the insulating materials. It was found that the thickness of kraft paper affecting the capacitance value and the PDC measurement of the tested model. In both dry and wet conditions, the sample of two layers of kraft insulation paper shows the best insulation status as it has the lowest conductivity compared to the other samples. It can be concluded that it is necessary to determine the ideal thickness of insulating paper to ensure that the power transformer has the best insulation.

Electromagnetic Fault Injection (EMFI) is a well known method of introducing faults for security analysis of digital devices. Such faults can be seen as analogous to the faults which are known to naturally occur in digital devices, a known problem with designing safety-critical systems.Numerous standards have been developed for safety-critical systems, including the development of standards for increasing the rate of naturally occurring faults using particle sources. In this work, we demonstrate that desktop EMFI tooling can be used to accomplish similar testing, but with more control, effectively speeding up the evaluation process.We demonstrate using EMFI tooling for safety evaluation to recreate a highly publicized safety issue present in an automotive ECU – one that could not easily be recreated with other techniques.

In this work, Schottky diodes based on amorphous indium-gallium-zinc-oxide (IGZO) were fabricated on cellulose microfiber paper substrate. Silver lines used as the Schottky barrier were printed, in parallel to thermally evaporated Cr/Au ohmic contact, using a dispense printer. The morphological and electrical characteristics of the devices are presented. The fabricated diodes exhibited rectification ratios ranging from 3.4 to 34.9 at ±1V with ON voltages that range from 1.1V to 1.4 V, for device lengths (Ag to Au distance) from 145 µm to 894 µm. The diodes were characterized in a temperature range between 25°C and 80°C. They showed a decrease of the ON current when increasing temperature, which is mainly attributed to the change of the cellulose microstructure. Indeed, an opposite of the ON current behavior was registered when the diode was realized on a polyimide substrate. The realized flexible paper-based diodes offer a potential promising choice for printed environmental-friendly electronics.

The industry of disposables has undergone a huge revolution in this century owing to the busy lifestyles and technological advancements in its production and manufacturing process. Paper cups are one of the widely used products in disposable industry. It has multi utility options that is it can be used to drink water as well as beverages, soups, liquids etc. This paper entirely focuses on increasing the quality factor of production and manufacturing process of these paper cups by adding additional circuitry to the existing machinery to reduce waste of raw materials as well as the per unit cost involved in wastage of electricity. This research work is based on using proximity sensors to sense the materials and molded paper cups infront of machinery and reduce the electric wastage through a relay Mechanism assembly. This is a PLC based live project example of effectively increasing the overall efficiency of the manufacturing plant

For the detection of product color uniformity and seam texture defects in the production process of test paper, detection methods are proposed respectively. For the detection of the color uniformity, a uniformity detection method based on dynamic light correction is proposed. The illumination correction image is used for color dynamic compensation of the test paper image to solve the influence of uneven illumination on the test paper. For the detection of texture defects such as seams, a texture defect detection method based on gray gradient aggregation intensity is proposed. This method uses one-way Gaussian convolution to strengthen features, and then calculates the gradient, divides the region and calculates the gradient extremum aggregation strength to judge texture defects, which can quickly and efficiently find seam defects. The experimental results show that the above methods have obvious effects on the color uniformity and seam detection of the test paper. The color uniformity accuracy rate is 96%, the seam detection accuracy rate is 97%. The total detection time of a single test paper is about 90ms. The algorithm is real-time and accurate, and can be used in actual production detection.

Life expectancy of power transformers is limited by the integrity of insulating cellulosic paper wound around transformer winding. The insulating paper is subjected to thermal, electrical and mechanical stresses. There are three main factors causing degradation in the paper, i.e. moisture, oxygen and temperature. In this work, the degradation rate due to temperature is only discussed. That means that transformer life could be shortened or extended by adjusting loads which results in higher or lower temperature conditions. The temperature, namely the hot-spot temperature is typically used to estimate the relative ageing rate and loss of insulation life. Being able to estimate the hot-spot temperature accurately given load and weather data helps operators to plan about transformer replacement properly. This could also reduce costs of early replacement due to a conservative estimation. In this work, thermal models have been developed using machine learning techniques to learn thermal behavior from historical data. The data are comprised of the hot-spot temperature estimated by winding temperature indicator (WTI), load profiles, ambient temperature, rainfall, wind speed and direction and solar radiation. The proposed method has been validated using data for five 400kV/275kV, four 400kV/132kV and two 275kV/66kV autotransformers and has been shown to work effectively.

Although testing software is paramount to safeguard our digitizing society, students are reluctant to consider a career in the field. A reason could be that dedicated courses on software testing are rare. However, even when such a course exists, students perceive testing as a boring, unrewarding and even dogmatic chore. For more than 10 years, we have been teaching a software testing course at the Vrije Universiteit in Amsterdam. Driven by our belief that an abundant exposure to software bugs makes good testers, we experimented with many ideas to engage students and make them love the topic. The most unorthodox, yet effective interventions we are proud of, were: (1) to scare students by analyzing past, software-related accidents, such as Therac-25 or Boeing 737-MAX; (2) to thrill them using bug-hunting gamification, enabled by the in-house developed VU-BugZoo; (3) to trust them an end-To-end testing of safety-critical software-intensive systems, such as model trains, automatic insulin pumps and even radiotherapy facilities, and (4) to inspire their career, by opening a dialog with test professionals from industry. The result is a mature course, read yearly by 50 computer science graduates, where almost 80% of the participants find the topic interesting and challenging, and 40% consider a future carrier in testing. These positive results make us confident that we found a formula that works. In this position paper, we would like to share our innovative ideas and lessons learned. Also in the future, we will stay committed to educate enthusiastic and responsible software testers.

The purpose of this short position paper is to stimulate a community wide discussion on how situation awareness (SA) technologies may best support the decisions made during pandemics. Currently much of SA is directed towards the critical information needed to make epidemiological and public health decisions; as important as this is, an epidemic also requires doctors and front line medical professional to make numerous decisions regarding individualized patient care. The question is how can SA contribute to both the rapid collection, analysis, and sharing of critical patient information among medical personnel, and then across all levels of decision-making from individual patients to public health policy?

The industry of disposables has undergone an astronomically immense revolution in this century owing to the diligent lifestyles and technological advancements in its engenderment and manufacturing process. Paper cups are one of the widely used products in disposable industry. It has multi utility options that is it can be acclimated to imbibe water as well as beverages, soups, liquids etc. This paper entirely fixates on incrementing the quality factor of engenderment and manufacturing process of these paper cups by integrating adscititious circuitry to the subsisting machinery to truncate waste of raw materials as well as the per unit cost involved in wastage of electricity. There is a necessity to improvise the quality of overall production parameters using automation techniques. Replacing the whole machinery is a very high costing implementation hence economic feasibility of automation can be achieved by adding an additional circuitry and improving the overall perfoemance. This research work is predicated on utilizing proximity sensors to sense the materials and molded paper cups in front of machinery and minimize the electric wastage through a relay Mechanism assembly. This is a PLC predicated live project example of efficaciously incrementing the overall efficiency of the manufacturing plant

Facebook, Twitter, Instagram, and LinkedIn are all popular online social media sites these days. Everyone uses different social media platforms, from children to adults. The use of these social media applications is increasing, which leads to a rise in social media crime. Here is where the word “fake profiles” comes into play; these fake profiles are responsible for distributing misleading details about a particular user or attempting fraudulent activities with bad intentions. Many researchers have been carried in response to the issue of fake profiles that exist in any social media application. There is research available in different directions to get a real problem solution. This paper summarizes all of the research on fake profile identification in social media platforms. This paper gives survey of work, indicating whether the user profile is fake or real.

In this paper we propose to implements blockchain technology for Internet of Things (IoT) networks that use Practical Byzantine Fault Tolerance (PBFT) consensus algorithm. To eliminate the reliance on a single leader and improve performance, we propose to allow multiple leaders to propose request batches independently and, possibly, concurrently, by using different overlay networks. Nodes participate in parallel consensus rounds without contention, and they only contend with others to reserve the next available spot for the atomic insertion of a new transaction batch or block into the replicated blockchain ledger. We develop an analytical model for the multiple leader PBFT ordering service by using a Discrete-time Markov chain. Our evaluations show that our model outperforms the original multiple entry point PBFT protocol in a wide range of parameter values, and that it scales well with the number of orderer nodes in the PBFT committee and block arrival rate.

Long-term evolution in unlicensed spectrum (LTE-U) can make use of centralized scheduling, interference coordination and other technologies to achieve better spectrum efficiency (SE). As the evolution of cloud computing, mobile edge computing (MEC) sinks the computing and storage capacity from the centralized data center to the edge of the network, which is the key technology to achieve low delay and high speed. However, the traditional centralized scheme in small cell networks (SCNs) structure will bring huge signal overheads. In order to adapt to the complex and changeable network system, this paper proposes a distributed resource and power allocation scheme under MEC environment, which enables small base stations (SBSs) to work autonomously. The SBSs need only little information exchange through the information cloud (IC) and finally obtain the global optimal SE. Simulation results confirm the correctness and effectiveness of the proposed scheme, and demonstrate the superiority of the distributed scheme over the centralized scheme.

The pervasive use of software systems and current threat environment demand that software systems not only survive cyberattacks, but also bounce back better, stronger, and faster. However, what constitutes a modern software system? Where should the security and resilience mechanisms be-in the application software or in the cloud environment where it runs? In this concept paper, we set up a context to pose these questions and present a roadmap to answer them. We describe challenges to achieving resilience and beyond, and outline potential research directions to stimulate discussion in the workshop.

Utilizing the in-situ reducing method, a reduced graphene oxide (rGO) paper for 13~14 um was obtained and exhibits great Terahertz (THz) absorbing capability. The absorption of rGO paper exceeds 43% in the whole frequency band from 0.3~1.2 THz and maximum absorption reaches 59.33% at 1.13 THz. This makes it possible to realize ultra-thin broadband THz absorbing materials.

In order to realize smart factory which is appeared in the concepts of Society 5.0 and Industry 4.0, wireless Internet of Things (IoT) becomes a key technology. Inside of the factory, there are heavy DATA traffics exist between moving/movable machine tools/robots/automated guided vehicle (AGV) with wireless access point (AP) and high speed moving/rotating objects/materials with wireless sensor node (SN). Currently, wireless systems used for wireless IoT are limited such as wireless-LAN/Bluetooth/RFID. Since these system’s frequency bands are limited and narrow, the interference between these systems becomes severe. In this paper, we propose a simplified beam forming wireless IoT communication using novel Wi-Fi backscatter system to notify the existence of SN who wants to send its DATA to AP. For Wi-Fi AP with beamforming function, knowing the numbers of existing SNs in each beam area will be a help for efficient beam control. This paper describes the Wi-Fi backscatter system in which the SNs backscatter the Wi-Fi signal transmitted from the AP then the AP detects the backscatter signals from SNs and know the existing SN’s number in its beam area. Since this backscatter system uses Wi-Fi modulated signal, the separation of SNs’ backscatter signals from AP’s transmitting Wi-Fi signal becomes complicated. This paper also describes the transceiver architecture of AP which reduces the complexity of signal processing and improves the dynamic range of reception.

Anstract- While wireless technologies are common solutions to the last mile problem for IoT systems, challenges exist with devices that are in remote locations, sparse deployments, have power and cost constraints, and low data applications as the cost of wireless and the supporting infrastructure presents barriers to entry. This work presents a last mile solution relying on smartphones to bridge the gap between the data generation device and the internet. A unique, low-power solution is presented based on QR codes and e-paper displays that allows a user's smartphone to carry the power and processing burden for data transmission. Utilizing the persistent nature of e-paper displays with low power requirements, QR codes can efficiently communicate data with minimal power impacts to a device's power budget and create large communication windows for user data pickup, leveraging the power of the smartphone without the need for extensive user training and costly infrastructure.