Search

Background: Intelligent food packaging that can monitor food quality and safety is essential in modern commercial trade. Research on the fabrication of environmentally friendly colorimetric labels that can indicate the freshness of food through color changes are needed. Methods: In this study, paper-based colorimetric labels were prepared using filter paper dipped into a solution of Roselle flower extract, and their performance in monitoring shrimp spoilage was investigated. Results: The labels’ response to ammonia vapor shows a distinct color variation from red to greenish-grey, corresponding to a sharp increase in the total color difference (ΔE = 32). The labels are relatively stable during storage at 4°C for up to 20 days. In shrimp freshness monitoring, the color changes from red to purple, which corresponds to increasing levels of total volatile basic nitrogen (TVB-N), and can be observed easily with the naked eye. Conclusion: This suggests that our paper-based colorimetric labels impregnated with Roselle extract show superior performance in detecting shrimp spoilage.

WOS:000967659000009 The utilization of plant extraction products from Oeneanthe pimpinelloides (Apiaceae family) seeds were investigated in terms of their use as an insecticide control of packaging materials. The aim was to investigate their insecticidal effects against the flour beetle Tribolium castaneum. The Oeneanthe pimpinelloides seeds were extracted with methanol. By using the liquid-liquid extraction method, the hexane extract (II) was separated from the methanol extract (I) and hexane and methanol were evaporated. Then, the chemical composition of each sample was determined via gas chromatography–mass spectrometry. The methanol extract predominantly contained tetrahydrofuran, 1-methoxy-2-propanol, 1-methoxy, 2-butoxyethanol, 1-phenylethanone, cyclohexene carboxylate derivative, (3-phenyl-2-propynylidene) cyclopropane, diphenyldiazene, and dihydroxypropyl ester components, while the hexane fraction contained nonane, 1-octanol, decane, undecane, tridecane, alkyl benzene, benzene sulfonic acid, benzoxazine, and hexadecanoic acid components, as well as some derivatives of them. Each fraction was dissolved in DMSO for impregnation on filter paper. The insecticide effects of the paper samples were determined against Tribolium castneum. According to the results, the mortality started after 3 d for each fraction. After 4 d, the hexane fraction indicated total mortality in comparison with the methanol fraction, which showed partial mortality (3/5).

From the end of the nineteenth century and one hundred years onward, home sewing was an important part of many women’s duties, but it was also a pleasure, something that existed parallel with the emerging mass-produced ready-to-wear industry. The paper patterns used for home dressmaking were often sold and distributed through women’s magazines. These pattern sections were both a kind of reader service and a conscious strategy to capture the female target group. This article, based on an analysis of three Swedish magazines, is the first in-depth survey of patterns for home sewing of women’s clothes in Sweden. The study shows how the magazines adapted to changes in society with increasingly easier patterns and ready-cut fabric for their readers. By highlighting women making their clothes in the home, this article contributes to an often-neglected area of women’s memory and fashion history.

Foam-assisted web forming and chemical application technologies have great potential to improve manufacturing efficiency and product quality in the paper and nonwovens industries. In this study, the benefits of foam forming and foam-assisted application of chemicals were demonstrated in a pilot machine trial. Uniform high-bulk webs of unrefined bleached softwood kraft pulp (BSKP) and viscose fibers were manufactured by foam forming. It was shown that foam formed low-grammage and high-bulk viscose fiber webs can be strengthened by foam-assisted application of latex onto the wet web. Correspondingly, foam-assisted application of carboxymethyl cellulose (CMC) and anionic polyacrylamide (A-PAM) improved the strength of the foam formed low-grammage and high-bulk BSKP web. Overall, the pilot machine results indicated that material cost savings could be achieved and a high-performance product could be manufactured with foam-based technologies.

This study looked at how using small or large pieces of Rice Husk Ash and Waste Paper Sludge Ash can affect how strong and how much the concrete shrinks when it dries. When Rice Husk Ash (RHA) and Waste Paper Sludge Ash (WPSA) were added to concrete, more water was needed. However, the mechanical properties of the concrete were similar or better than the concrete made with just Ordinary Portland Cement (OPC). Finer RHA and WPSA gave the best improvements. Rice husk and waste paper ash made things shrink a lot because of tiny particles that cause it to happen. This research looked at using waste paper sludge ash instead of some of the cement in a kind of concrete called M20 mix. They tested different amounts of the ash (0%, 5%, 10%, 15%, 20%, and 25%) to see how strong it made the concrete. They tested the strength of the concrete up to 28 days after it was made and compared it to normal concrete. Waste paper sludge can be used as fuel because it has a lot of heat energy. Afterwards, the remaining ash can be used to replace some of the cement.

Purpose: The aim of this research work is to analyze and compare profitability performance of selected paper companies in India. Approach/Methodology/Design: An analytical study method is employed in this research work by relying on secondary data. In this research work 12 paper companies are selected as a sample based on their higher net sales and the study period are last10 financial years from 2012-13 to 2021-22. Ratio Analysis is used as an accounting tool in which six profitability ratios are employed. One-way ANOVA technique of parametric test is used as a statistical tool to identify the difference among sample means. Findings: The major finding of the research work indicates that in all the selected paper companies the profitability performance of shows fluctuating trend during the study period of 10 years. The overall performance was good and satisfactory in Satia Industries Ltd., JK paper Ltd., Seshasayee Paper and Board Ltd. and NR Agarwal Industries Ltd. and it was low and dissatisfactory in Orient Paper & Industries Ltd. and Astron Paper & Board Mill Ltd. for all the selected profitability ratio during the study period. The results of statistical test revealed that in gross profit ratio, operating profit ratio and return on assets ratio formulated null hypotheses are rejected and in net profit ratio, return on net worth ratio and return on capital employed ratio formulated null hypotheses are accepted. Originality/value: In this research work profitability analysis is carried out which is helpful to know the profitability performance of selected paper companies. The result would help investors to make right choice of investment in selected companies. It would also identify that how efficiently a business can generates profit and value for its shareholders from its sales or operations, shareholders' fund or balance sheet’s assets.

Currently, tissue product producers try to meet consumers’ requirements to retain their loyalty. In perforated products, such as toilet paper, these requirements involve the paper being portioned along the perforation line and not outside of it. Thus, it becomes necessary to enhance the behavior of the perforation line in perforated tissue papers. The current study aimed to verify if the perforation line for 0° (the solution found in commercial perforated products) is the best solution to maximize the perforation efficiency. A finite element (FE) simulation was used to validate the experimental data, where the deviations from the experiments were 5.2% for the case with a 4 mm perforation length and 8.8% for a perforation of 2 mm, and optimize the perforation efficiency using the genetic algorithm while considering two different cases. In the first case, the blank distance and the perforation line angle were varied, with the best configuration being achieved with a blank distance of 0.1 mm and an inclination angle of 0.56°. For the second case, the blank distance was fixed to 1.0 mm and the only variable to be optimized was the inclination angle of the perforation line. It was found that the best angle inclination was 0.67°. In both cases, it was verified that a slight inclination in the perforation line will favor partitioning and therefore the perforation efficiency.

In the research of the review of this creative and innovation area that can benefit community and nation. The review that had been picked in this research was the paper. The aim of this review is to explain about the advantages or the benefits of paper and also the used of the paper, also the improvement of the nation by the helps of the paper production and innovation. The methods that we going to describe in this review was the involvement of the paper production in many fields, such as for individuals, schools, medical centre and so on. There are a lot of information and new knowledges that we going to present and cite in this review. The conclusion of this article review was to be making sure that everyone knows the important and the properties of the paper in our country.

The aim of this white paper is to draw attention to the roles and responsibilities of higher education and research organisations in addressing gender-based violence. These roles and responsibilities may not be recognised or are downplayed, and this results in institutions failing to take appropriate action to ensure safe environments for students and staff. Secondly, the white paper aims to explicate the essential features and elements of effective policies and actions and lastly, to highlight the critical role of institutional leadership in making the policy frameworks and actions work. This white paper is primarily intended for: institutional leaders and top management; staff responsible for the design, adoption and implementation of institutional policies; staff appointed to support victims and survivors; and any other member of the academic community committed to ending gender-based violence. It builds on the results of the UniSAFE research, including the prevalence study (Lipinsky et al. 2022, Humbert et al. 2022), the institutional policy analysis (Huck et al. 2022), case studies (Ranea-Triviño et al. 2022), interviews (Blazyte and Pilinkaite 2022), and stakeholder and expert workshops (Yellow Window 2023a, 2023b), the purpose of which have been to gain insight into and test emerging policy solutions.