Search

In this work, electrodes based on laser-scribed reduced graphene oxide were fabricated using filter paper as the substrate. To fabricate the electrodes, a water suspension of graphene oxide was filtered to produce a continuous and uniform film of graphene oxide on the filter paper surface. Subsequently, a CO2 laser was used to "write" the working, counter and reference eelctroes by reducing graphene oxide in specific areas to define complete sensors. Referecnce electrodes were then coated with a commercial Ag/AgCl conductive paste to produce a quasi Ag/AgCl reference. As fabricated devices were employed as electrochemical sensors for detection of phosphate ions in water by employing the molybdenum blue method. This method exploits the reaction between molybdate and phosphate ions in acidic media leading to a Keggin-type complex (PMo12O3 40) which, being electrochemically active, enables the indiret detection of phosphate ions. Sensors exhibited high selectivity and sensitive detection of phosphate ions in a wide linear range, from 1 to 20 & mu;M; with a limit of detection of 0.4 & mu;M. To demonstrate that sensors could be utilized for in-situ phosphate ion detection, paper substrate was first pre-loaded with sul-phuric acid and molybdate ions. During analysis, these chemicals were then desorbed directly into the test sample eliminating the need for any kind of external manipulation or reagent addition. Thus, this paper presents the fabrication of a portable, easy-to-use, biodegradable and fast phosphate ions sensor for in situ and real-time monitoring of water quality.

Background Huntington’s disease is a complex neurodegenerative hereditary disease with symptoms in all domains of a person’s functioning. It begins after a healthy start in life and leads through the relentless progression over many years to complete care dependency and finally death. To date, the disease is incurable. The long progressive complex nature of the disease demands multiple disciplines for treatment and care of patient and family. These health care providers need inter- and multidisciplinary collaboration to persevere and be efficacious in this devastating disease trajectory. Discussion The position paper outlines current knowledge and experience alongside the experience and consensus of a recognised group of HD multidisciplinary experts. Additionally the patient’s voice is clear and calls for health care providers with a holistic view on patient and family. Building long-term trust is a cornerstone of the network around the patient. This paper describes a managed care network comprising all the needed professionals and services. In the health care system, the role of a central coordinator or case manager is of key importance but lacks an appropriate guideline. Other disciplines currently without guidelines are general practitioners, nurses, psychologists, and social workers. Guidelines for neurologists, psychiatrists, geneticists, occupational therapists, speech and language therapists, physiotherapists, dieticians, and dentists are being discussed. Apart from all these profession-specific guidelines, distinctive inter- and multidisciplinary collaboration requirements must be met. Conclusions and recommendations The complex nature of Huntington's disease demands multidisciplinary treatment and care endorsed by international regulations and the lay association. Available guidelines as reviewed in this paper should be used, made available by a central body, and updated every 3–5 years. Time needs to be invested in developing missing guidelines but the lack of this ‘proof’ should not prevent the ‘doing’ of good care.

In the paper by Inna Ganschow, the camp experience in the Soviet Union as a result of forced conscription will be treated, specifically in its artistic processing: secretly written diaries and letters by Luxembourg Wehrmacht soldiers. Contemporary historical research today calls them ego documents – private, handwritten texts of a personal nature. The range of texts to be examined in the lecture ranges from the smuggled out notes and letters that their released comrades took with them to Luxembourg, through diaries, speeches and self-made dictionaries to poems, short stories and drawings, some of which were in the camp and some immediately after the return from Tambov and other camps in the Soviet Union. The focus is on the question of dealing with the thesis of the Auschwitz concentration camp survivor Viktor Frankl, psychiatrist and neurologist from Vienna, that the meaning of camp life - logotherapy - can have a self-healing effect and increase the self-healing powers, which increases the chances of survival.

This is a proposal for publishing resource papers as registered reports in the Northern European Journal of Language Technology. The idea is that authors write a data collection plan with a full data statement, to the extent that it can be written before data collection starts. Once the proposal is approved, publication of the final resource paper is guaranteed, as long as the data collection plan is followed (modulo reasonable changes due to unforeseen circumstances). This proposal changes the reviewing process from an antagonistic to a collaborative enterprise, and hopefully encourages NLP resources to develop and publish more high-quality datasets. The key advantage of this proposal is that it helps to promote responsible resource development (through constructive peer review) and to avoid research waste.

Cellulose-based materials represent a renewable, biodegradable, and environmentally friendly alternative to plastic from fossil resources. Nanopaper is a strong and lightweight material formed from cellulose nanofibrils (CNFs). Paper and nanopaper have been considered as excellent alternatives to plastics for use in agriculture and for packaging applications. However, common for both paper and nanopaper is their hydrophilic character, and consequently, poor water-resistance properties. ORMOCER®s are a class of inorganic–organic polymers with excellent barrier and protective properties used for a range of coating applications. Here we present ORMOCER®-coated paper and nanopaper. The coated papers and nanopapers are characterized, both in terms of their morphology, hydrophobicity, and mechanical properties. We demonstrate that the pressure used during the pressing and drying of paper and nanopaper influence their tear and tensile—properties, and that the morphology of the coated nanopaper differs significantly from that of the coated paper. While the ORMOCER® was impregnated within the porous network of the paper, a well-defined two-layered morphology was obtained with the coated nanopaper. Further, the biodegradability of the nanopaper with and without coating was assessed. The degradation study demonstrated that both the pressure used during the pressing and drying of the nanopaper, and the composition of the ORMOCER®, influenced the rate of degradation. Taken together, ORMOCER®-coated paper and nanopaper are promising for the preparation of materials that are both water-resistant, renewable, and biodegradable.

We propose a unique form of dye-sensitized solar cells (DSSCs), paper DSSCs based on carbon-nanotube (CNT) composite papers, and the use of a gel electrolyte for the paper DSSC. In our previous study, we succeeded in developing the paper DSSC. However, its performance and lifetime were not sufficient. We considered that the problem was the use of liquid-type electrolyte. To improve the performance of the paper DSSC, a gel electrolyte was introduced to increase safety and durability. Here, a polymer gel electrolyte was synthesized using a copolymer of polyethylene glycol (PEG) and polyvinylidene fluoride (PVDF) as a matrix, mixed with iodine and potassium iodide. The resulting paper DSSC had a fill factor (FF, a performance indicator) of 0.248 and a conversion efficiency of 2.43 × 10−5% with an extended working time (lifetime) of more than 110 min. Further modifications were made to the metallic CNT composite paper and the gel electrolyte, resulting in an increased conversion efficiency of 2.02 × 10−3%. This study suggests the potential of gel electrolytes in enhancing the performance of paper DSSCs, providing new insights for their future applications.

The aim of this study is to propose a test method for the determination of the quality of transformer paper insulation. For this purpose, the oil/cellulose insulation systems were exposed to various accelerated aging tests. The results of the aging experiments of normal Kraft and thermally upgraded papers, two different types of transformer oil (mineral and natural ester), and copper are shown. Aging was carried out in various experiments at 150 °C, 160 °C, 170 °C, and 180 °C with dry (initial values ≤ 0.5%) and moistened cellulose insulation (initial values 3–3.5%). Following insulating oil and paper, degradation markers were measured: the degree of polymerization, tensile strength, furan derivates, methanol/ethanol, acidity, interfacial tension, and dissipation factor. It was found that the aging of cellulose insulation in cycles was 1.5–1.6 times faster in comparison to continuous aging, due to the more pronounced effect of hydrolytic mechanism in cyclic aging owing to the produced and absorbed water. Furthermore, it was observed that the high initial water content in cellulose increases the aging rate two to three times more than in the dry experimental setup. The proposed aging test in cycles can be used to achieve faster aging and to compare the quality of different insulating papers.

Bacterial nanocellulose (BNC), due to its inherent nanometric scale and strength properties, can be considered as a good candidate to be used in papermaking. This work explored the possibility of using it in the production of fine paper as a wet-end component and for the paper coating. Filler-containing handsheet production was performed with and without the presence of common additives typically used in the furnish of office papers. It was found that, under optimized conditions, BNC mechanically treated by high-pressure homogenization could improve all the evaluated paper properties (mechanical, optical and structural) without impairing the filler retention. However, paper strength was improved only to a small extent (increase in the tensile index of 8% for a filler content of ca. 27.5%). On the other hand, when used at the paper surface, remarkable improvements in the gamut area of >25% in comparison to the base paper and of >40% in comparison to only-starch coated papers were achieved for a formulation having 50% BNC and 50% of carboxymethylcellulose. Overall, the present results highlight the possibility of using BNC as a paper component, particularly when applied at the paper substrate as a coating agent aiming at improving printing quality., Fundacão para a Ciência e a Tecnologia (FCT), Portugal is acknowledged by SFRH/BDE/108095/2015 grant and Strategic Research Centre Project (UIDB/00102/2020). This work was also carried out under the Project Inpactus - innovative products and technologies from eucalyptus, Project N.º 21874 funded by Portugal 2020 through European Regional Development Fund (ERDF) in the frame of COMPETE 2020 nº246/AXIS II/2017, info:eu-repo/semantics/publishedVersion