Search

In the world a number of researches are intensively being conducted on the preparation of new paper compositions based on natural polymers, expanding the application scope of products with unique and rare properties using not only plant fibers but also non-traditional fibers, the development of traditional papers for priority areas in this field and manufacturing paper products from mineral fibers with the help of existing devices. Systematic, regular studies of the use of inorganic binders in the preparation of sheet (sheet) materials based on mineral fibers have not yet been carried out by the method of paper technology. Paper products were obtained from cellulose-containing plants. Several quality indicators of paper products were studied. These are: Tearing length, tearing resistance, bending resistance, number of bendings in both directions.

An extreme occurrence within the earth’s system that causes human fatalities, injuries, and property destruction is referred to as a “disaster” from a social perspective. Disaster management is one of the most critical topics around the world. Many countries are getting affected because of its high magnitude impact on economy and loss of life. The Karnataka government must always be on guard and ready to meet problems due to the frequent natural disasters like landslides, floods, droughts, and human-induced dangers. In order to lessen the effect of disasters on the community, the Government of Karnataka has built enhanced institutional structures for disaster risk reduction. The main aim of the review paper of this, is to create awareness about the situations occurring due to any form of disasters and to develop preparedness in younger generation to face disaster situations.

A huge amount of newspaper waste is generated in an average Indian household on a daily basis. The ideology behind this study is to amalgamate this paper waste into construction materials. This manuscript is a preliminary initiative for the same motive and explores the feasibility of mixing waste paper pulp into cement mortar for further adopting the practice on construction sites. Different ratios of cement, standard sand and crushed paper pulp (soaked for 72 hours) were administered to cast cement mortar cubes and the same were tested for compressive strength in a compression testing machine. The several trial mixes, partially replacing sand in mortar making were attempted to study the behavior of cement mortar while infused with waste paper pulp. The strength of these cubes were compared to standard cement mortar cubes cast using one part cement and 3 parts of standard sand. The trial ratios of cement, sand and paper pulp were 1:0.5:0.5; 1:0.75:0.25 and 1:0.25:0.75 respectively. Both 7 days as well as 28 days strength was determined. It was found that one part cement, half part standard sand and half a part of waste paper pulp was the most optimum combination yielding satisfactory strength of cement mortar cubes. The compressive strength of standard cube was 7.2 MPa and the same for 1:0.5:0.5 was 6.6 MPa. Thus waste paper pulp infused cement mortar may be used for brickwork and other trivial lean cement members in construction. The purpose of the study is to address two major underlying challenges in modern day construction projects, first being the dearth of river sand availability and secondly the disposal of waste paper which ultimately ends up in landfills subsequently polluting the environment.

The use of paper directly proportional to the growth in the number of people. The impact is in the form of environmental problems where there is logging of forest trees, and deforestation so that it affects the ecosystem and the natural environment. Trees are cut down and made into paper for human needs, including to make books as learning media. In the current technological era, the use of books as a medium of learning has an impact on students’ declining motivation to learn. To solve the problem, we proposes the application of Augmented Reality (AR) as a learning medium. This research uses Game Engine Unity and Vuforia which can display 3-dimensional objects, and uses Android as the basis of the system. In this paper, we introduce four equipments of athletic sports. The aim of this research is to reduce the use of paper as a learning medium and increase learning motivation. The result of the research is an Augmented Reality-based athletics introduction application that has been tested for its performance using blackbox testing using various conditions of its marker.

Bioethanol is one of the best alternative form of energy source in place of fossil fuels. In this study, bioethanol was produced from waste paper following a pre-treatment. The isolates used were isolated from fresh palm wine and characterized via standard microbiological methods. The pre-treatment was done using 5%, 10% and 50% concentrations of sulphuric acid and sodium hydroxide respectively. Results obtained showed that the concentration of glucose from the substrates ranged between 0.2-0.8 ppm with 10% sulphuric acid giving the highest glucose yield. The fermentation of the sugar was carried out using Saccharomyces cerevisiae for the production of bioethanol, which was recovered by fractional distillation. From this study, the production of bioethanol from waste paper is a veritable means of shoring up energy deficit especially in the developing countries.

Fomites have been known to harbor significant amount of microbial load and its handling by food vendors poses a significant risk to consumers. In this study, swab samples were collected from vendors handling paper currency; their food contaminated hands, and selected foods-Akara, Suya and Bole. These fomites were evaluated for organisms that may pose a risk of food infection/contamination. The organisms isolated were identified based on their macroscopic, mi-croscopic and biochemical characteristics and comparison with standard reference organisms. From the results obtained, the paper currency had the highest numbers of bacterial and fungal load (too numerous to count – TNTC), food contaminated hands ranged between 12 x 105- 15 x105 cfu/g and the selected foods- Akara, Suya and Bole had 7x105- 12 x105 cfu/g. The bacteria members’ species recorded include Pseudomonas, Streptococcus pyogenes, Shigella, Proteus vulgaris, Escherichia coli, klebsiella pneumonia, Salmonella typhi, Enterobacter sp, Aeromonas hydrophila, Micrococcus luteus. Others include Clostridium sp, Staphylococcus aureus, Staphylococcus epidermidis and Bacillus cereus. The fungal species reported include Aspergillus, Yeast, Penicillium sp. and Saccharomyces spp. Mucor sp. and Rhizopus sp. Members of Staphylococcus aureus and Escherichia coli were noted to occur on all the samples surveyed. From this study, it can be deduced that handling of paper currencies by food vendors could serve as a direct and indirect pathway for man-microbe interface.

Buildings are the main sector in energy consumption and CO2 emissions. Retrofitting of existing building has been identified as one of the significant strategies for reducing the impacts of buildings on energy and environment. However, recent studies have shown that low energy buildings mostly do not perform as expected. These differences are related to different factors including the interaction between occupants and building technologies. Thus, most renovation initiatives have not considered occupant behavior equally to the energy efficiency process. Many of the existing studies have been focused on technological improvements rather than behavioral-related parameters. Hence, this study aims to review the literature on the occupants’ energy perceptions and their behavioral interventions in energy efficient retrofitted residential buildings. The results of the literature review reveal that household’s energy consumption significantly differs according to the various factors including social-economic, cultural, household composition as well as individual attitudes, habits, experiences, and occupant practices. Moreover, the energy consumption in the residential sector is highly dependent on demographic parameters. The demographics factors are classified according to type of family, level of income, age of the occupants, and individuals’ educational status. The findings shows that energy perception gap formulates the energy behavior and it is related to the lack of personal interest, accurate information and individuals’ awareness about how to consume efficiently. Therefore, it is suggested that the level of occupant’s perception on energy, control, or comfort have to be considered during energy efficiency retrofits. The study contributes to understanding of occupants’ behaviors which cause energy performance gap and enlighten approaches to encourage more energy efficient behavior.

Eucalyptus is one of the major species used for pulp and paper industry. As industries develop, the need for Eucalyptus supply increases. However, there are challenges plantation companies must specifically determining eucalyptus market price potential risks in eucalyptus plantation and how eucalyptus plantation impacts the surrounding environment.. Stakeholders on eucalyptus supply chain have risks which have to be mitigated. The eucalyptus seedling and developer and the supplier hold crucial role in providing good quality eucalyptus raw material for pulp and paper production plants. This research is conducted to explore on ways to mitigate each stakeholders risk, challenges plantation companies face in fulfilling eucalyptus raw material for pulp and paper production plants. There are four stakeholders in eucalyptus supply chain: eucalyptus seedling developer and seller, supplier, distribution centre and pulp and paper production plants. Some of the major risk stakeholders are facing in eucalyptus supply chain are: early cut of eucalyptus trees, farmers’ lack of understanding on growing eucalyptus properly, small stem size, fluctuating eucalyptus wood price and low stock quantity. Some of the minor risk stakeholders are facing: earthquake, over fertilization, overwatering, cold climate, and plant setting. There are four methods used to determine eucalyptus pricing: cost-based pricing, customer-based pricing, competition-based pricing, and statutory pricing. Eucalyptus consume high amount of water which can cause dry areas around eucalyptus plantation area and low groundwater reservoir.

Nowadays, demand of the pulp and paper production increases quickly. That increasing demand has led to demanding of eucalyptus plantation. That is why eucalyptus plantation has rapidly expanded and became the most planted tree species across the world over the last century. Not only because its unique characteristics, increasing of eucalyptus plantation also happened because its growing gives a socio-economic benefits, industrial benefits, and environmental impacts. However, increasing demand of eucalyptus certainly make availability of eucalyptus being determined, known as limited supply chain. Due to the increasing demand and limited supply chain, the eucalyptus wood supply should managed, by integrated the supply chain well. In this research study, the supply chain of eucalyptus wood for pulp and paper industry was diagnosed and divided into three degree, there are direct supply chain, extended supply chain, and ultimate supply chain. Four main stakeholders in this chain identified consisted of the eucalyptus seedling developers and sellers, the suppliers, the distribution centers, and the pulp and paper production plants.

With the support of new technology, recyclable paper is capable of being both waterproof and fireproof, and it has been used in architectural design to some extent. However, there are limited studies on the use of paper materials in landscape architecture. The purpose of this study is to investigate the potential of paper materials practice in landscape architecture design from both functional and aesthetic perspectives. The method includes two parts: 1. a systematic review to investigate paper’s properties and capabilities to demonstrate it is qualified as a landscape construction material; 2. Provide a prototype to illustrate how to use paper materials in a practical landscape design. This paper found that the application of paper materials in landscape architecture has the following benefits: low-cost material, easy assemble and removal, build fast, easy transport, recyclable, unique material aesthetic feeling, low technical requirement, educational. Through a systematic review and case studies, this study explored the practical application value of paper materials in landscape architecture, and provided a feasible idea and direction for the landscape architecture industry to practice the concept of sustainable development.

The main idea of this research is to design a rechargeable paper battery from local cheap and available materials. The practical part is represented by adding Polyvinyl alcohol (PVA) to conductive polymer (PSS PEDOT) with adding different mineral salts for then study the quantum of electrical conductivity and heat influence on electrical conductivity and acidity factors of the Electrolyte solution.The next step was to produce a rechargeable, flexible battery manufactured from regular cellulose paper, sulfone, and ionic solution.The measurements were made using modern laboratory devices to study the electrical properties, conductivity, resistance (Hall Effect), and voltage quantum of the ionic solution. Through the results we obtained, we noticed an increase in the conductivity of the ionic solution when adding mineral salts. The voltage quantum of one battery ranged between 0.3-0.3 volts, also several batteries were connected in series, and the result was 1.8 volts. Manufactured paper batteries can be recharged with a direct current source and recover their efficiency marked up 98-99%.

Pakcoy is agricultural products and perisable after being harvested. One of methods to inhibit the rate of deterioration is by using packaging. The study aimed to examine the use of conventional and paper on quality changes. Pakcoy is packaged using PP plastic, PE plastic, paper and wrapping plastic. The experiment was designed by using a completely randomized design (CRD. Pakcoy was observed for the 7th days. The variable observed pakcoy were weight loss, color changes (L*, a*, and b* value), TPC content , Pb and Hg content. The results showed that the weight loss observations of PE. Observation of the color variable showed no difference in the various types of packaging but TPC and Pb content were significantly different.

The ability of activated carbon as an adsorber is depended on activating agent used for the activation process. An industrial application of the ethylene adsorption process as well as the design of the necessary equipment requires an accurate model to determine the effect of various factors on the efficiency of the process. The model is needed to predict the efficient activating agent to be applied in carbon activation. One ml of gas containing 200 ppm ethylene was injected into gas-tight jars, to which 4 sheets of nanopore activated carbon paper were placed. The ethylene concentration was measured every 5 minutes until 90 minutes using gas chromatography. The concentration of ethylene absorbed by the nanopore activated carbon paper, then calculated to construct a kinetics model of absorption. Data were analyzed using 4 kinetics models: nonlinear pseudo-first-order, nonlinear pseudo-second-order, Elovich, and Avrami kinetic models. The best adsorption kinetics model that described ethylene adsorption kinetics by nanopore activated carbon paper was the nonlinear pseudo-first-order, with equation model: qt = 1.35734 (1-exp0.15312 t). The compiled model has a match with R2 = 0.9981. The adsorption mechanisms and kinetics aspects was important on the use of adsorbents to remove ethylene in packaging and storage.

In recent years, plastic pollution has become one of the environmental issues of concern. This article explores the hazards of plastic straws and analyzes whether the decision to replace plastic straws with paper straws in the context of plastic restriction is entirely environmentally friendly. The results show that plastic films used in agricultural production remain in the soil after weathering and degradation, affecting soil structure, water and nutrient transfer processes, secondary salinization, and hindering plant growth. Microplastics in terrestrial and marine ecosystems are taken up by and accumulate in organisms and enter the human food web, affecting the human central nervous system and reproductive system. This article concludes that paper straws contain harmful additives, are challenging to recycle and degrade, are costly to build, are not environmentally friendly, and have a low promotional rate by studying their life cycle, content, recycling rate, degradation rate, usage problems, and applying. The paper also introduces the advantages of some new green straws, such as bamboo straws, wheat straws, PLA straws, and stainless-steel straws, which are environmentally friendly, durable, biodegradable, recyclable, and reusable. This essay aims to find better alternatives to address the potential environmental problems associated with plastic straws and mitigate the environmental hazards associated with the use of plastic products.

Paper consumption in Indonesia in 2003 reached 5.31 million tons, in 2004 the need for paper consumption reached 5.40 million tons. Meanwhile, in 2005, paper consumption reached 5.61 million tons and in 2009 it reached 7.50 million tons, and this figure continues to increase by 3% - 4% every year. The increase in consumption and the paper industry in Indonesia will be accompanied by an increase in the need for the main raw material for pulp and paper, namely wood so that environmental damage will occur. Alternative materials other than wood which contain cellulose and can be used for pulp and paper manufacture are Empty Palm Fruit Bunches (EFB) and coconut fiber. Mixed fiber paper or often called composite paper, is paper made from a mixture of two or more kinds of paper pulp with other materials. Composite paper can be made using the pulp of EFB mixed with coconut fiber using a banana peel binder. This study aims to determine the mixture of EFB pulp, coconut coir pulp, and banana peel binder so that it can be obtained mixed fiber paper with tear resistance and tensile strength which is most suitable to be applied as an alternative to packaging paper. Based on the pulp produced from research that has been carried out, the cellulose content ranged from 46,4316% until 48,4993%, and hemicellulose ranged between 18,2699% until 20,7593%. With a high cellulose content, samples of EFB raw materials and coconut fiber can be used as raw materials for making paper.

Art paper is a handicraft product made from fibers derived from plants. Plants that are used as the basic material for making art paper are plants that contain cellulose. One of plants that can be used as the basis for art paper are reeds. Reeds is one type of grass plant that can grow on land that has moist or dry characteristics. The aim of this research is making best-quality art paper from reed waste in order to tackle the environmental problem aftermath production process in reed drink industry. The laboratory activity of this research was carried out in August 2021 in laboratory of Universitas Brawijaya. For analysis, Design Expert 10 software with Response Surface method was used to get the optimum treatment in the process of delignification of reeds. There were two factors used in the Response Surface method, namely the raw material of reeds is the concentration of acetic acid with 85%, 90%, and 95% and cooking time of 30 minutes, 60 minutes, and 90 minutes. The optimum point of reeds delignification was the treatment with a 92.50% of acetic acid concentration and cooking time of 65.87 minutes which obtained cellulose and lignin of 77.501% and 7.352% respectively.

Pulp and paper industries are critical to a country’s economic growth. The type of raw material used and the pulping process determine the quality and quantity of wastewater generated. However, the generated wastewater with a dark colour comprises a high concentration of suspended solids, organic content, chemical oxygen demand (COD), volatile organic compounds, and a variety of other impurities. Therefore, in this study, a bench scale activated sludge treatment system was set up using a reactor consisting of an aeration tank with 5000 mg/L initial biomass and a clarifier chamber for the biomass to settle. The reactor was run few weeks with real domestic wastewater as the influent for 3 weeks to acclimatize the sludge inside the reactor. The reactor was then fed with the influent mixture of 20% industrial pulp wastewater and 80% domestic wastewater. Organic and nutrient parameter concentrations are tested from the influent and effluent sample throughout the study duration and recorded for data analysis. The removal of COD and TSS are at 83% and 90% respectively while the averaged BOD value of the treated wastewater is at 74.6%. The conclusion of this project is that the bench scale EAAS is able to treat BOD and TSS according to standard. However, a modification may be required to increase the efficiency of removing COD to meet the requirement standards. This modification could be either by using a biocarrier or an activated carbon to further enhance the treatment efficiency even at higher wastewater concentration.

The article is devoted to the study of the use of waste from the pulp and paper industry as soil, which can be used in technical and biological recultivation of disturbed lands, industrial waste dumps and other applications in accordance with its purpose. Studies of soil obtained from frozen sediments of sludge-lignin of JSC “Baikal Pulp and Paper Mill (BPPM)” with the addition of waste activated sludge of sewage treatment facilities were carried out. They were aimed at the research of its chemical and agrochemical composition, as well as toxicological properties. The tests carried out showed that the obtained soil is capable of intensifying the recultivation succession of disturbed lands, and also contributes to an increase in the growth and biomass of plants and increases their ability to reproduce. Thus, the developed technology for processing sediments of storage cards of JSC “BPPM” is based on the creation of effective conditions for such natural processes as freezing, drainage, self-overgrowth and allows not only to reduce the technical and economic costs of waste disposal, but also to increase the social and environmental security of the region.

The accumulation of paper waste encourages the utilization of HVS paper waste with Collage and Paper Quilling Techniques as a 2-dimensional medium for hair styling learning. The purpose of this study was to understand the process of utilizing HVS paper waste with collage and paper quilling techniques as a 2-dimensional medium for hair styling learning; to explore the design and shape produced in the utilization of HVS paper waste with collage and paper quilling techniques as a 2-dimensional medium for hair styling learning; to learn the validity of 2-Dimensional media for Hair Styling Learning by utilizing HVS Paper Waste using Collage and Paper Quilling Techniques. Development research with qualitative descriptive data analysis was carried out, the process of utilizing HVS paper waste with collage and paper quilling techniques using loose scrolls and multi strips scrolls was explored. Design and shape of hair styling for 5 face shapes. Validity by 5 experts with an average of 89.33% and, the results of final product assessment by 60 students obtained an average of 92.70% based on indicators of aspects of regulation, balance, color, conformity, attractiveness. Utilization of HVS paper waste with Collage and Paper Quilling Techniques as a 2-dimensional medium for hair styling learning is declared very feasible.

The recycling paper industry has a good potential market. The industry used recycled paper such as Old Corrugated Containers (OCC), Old Newspaper (ONP), mixed waste paper, and Sorted White Ledger (SWL) as raw material. In Indonesia, commonly, the industry got the raw material of about 50% by importing. The government provides regulation to ensure the sustainability of the industrial activity, that is the process of importing recycled paper and internal regulation to increase local raw materials. The objectives of the research were to study the chosen raw material for the recycling paper industry and to analyze the positioning strategy of consumption raw material for the recycling paper industry in Indonesia. This research used a qualitative description method by the Analytical Hierarchy Process (AHP) and Strength Weakness Opportunities Threat (SWOT) analysis. The data were obtained from a questionnaire distributed to the paper industry, paper researcher, and relevant agencies. Based on AHP, the strength criteria to choose raw material is the regulation and availability of raw material with values 0.323 and 0.243; and the alternative chosen is recycled paper raw material import. The result of SWOT analysis, the recycling paper industry in Indonesia, has an Internal Factor Analysis Strategy (IFAS) 0.05, and an External Factor Analysis Strategy (EFAS) - 0.03. That showed from SWOT quadrant matrix, the position coordinate point of IFAS and EFAS in quadrant II. That means the positioning strategy is diversification. The government, recycling paper industry, and relevant agencies to corporate to increase the collecting rate of recycled paper.

The purpose of this research is to design a Whatman paper based sensor for quantitative measurement of iodide anion by its quenching effect on the fluorescence intensity of the nitrogen doped carbon quantum dots (N-doped CQDs) using a smart phone as a detection system. In this project, N-doped CQDs were synthesized by a hydrothermal method using citric acid as a source of carbon and hexamethylenediamine as a source of nitrogen. In order to characterize of the synthesized N-doped CQDs, Fourier transform infrared spectrophotometry (FT-IR), Energy-dispersive X-ray spectroscopy (EDX) and dynamic light scattering (DLS) was used. After designing of the paper based sensor, an aliquot of the mixture of the N-doped CQDs:Glue (glue roles as the stabilizing agent) was injected on the hydrophilic zone of the paper and then by injection of different concentrations of iodide anion, the reduction of the fluorescence intensity was measured using the smart phone camera. By optimizing the critical parameters affecting the quenching efficiency of the N-doped CQDs including the size of the hydrophilic zone, the volume ratio of the N-doped CQDs:Glue, type of the Whtaman filter paper and the pH of sample solution, the proposed method was used for determination of iodide ion. The results show that two calibration curves in the ranges of 1-10 and 15-200 mmol L-1 iodide were obtained for determination of iodide anion. Also, the detection limit (LOD) of 3 mmol L-1 and the relative standard deviation (RSD) in the range of 2.6-2.9 % were obtained for the iodide anion in the range of 50-150 mmol L-1. The main advantages of the propsed method are rapidity, inexpensively, simplicity, availability and no need of expert for operation.

Perishable food really needs proper handling. Therefore, various industries and researchers continue to innovate, especially in the development of packaging. The development of active packaging is a new innovation in the field of packaging technology. This packaging innovation was designed to maintain the quality of packaged food. This study aimed to obtain the best concentration of antimicrobial garlic ingredients with a mixture of paper as an active packaging material. The concentration of garlic extract used in this study was 0%, 5%, 10%, and 15%. Based on the result obtained, it could be concluded that the active paper with the addition of garlic extract concentration of 15% had the best effectiveness then followed by concentrations of 10%, 5%, and 0%. The effectiveness could be seen from the diameter of inhibition zone formation resulted.

Adsorption treatment process is one of the techniques that has been employed to treat discharge or effluent from domestic wastewater (DWW), raw water and also landfill leachate. The potential of waste paper sludge (WPS) and activated carbon (AC) as an absorbent has been investigated to obtain the optimum mixing ratio in removing two working parameters such as ammonia nitrogen (NH3-N) and COD. Both WPS and AC were mixed together in different ratio. The absorption batch study is regarding the preparation of 5g composite adsorbent, 200 mL of raw leachate sample at pH 8.64, with a rotational agitation speed of 200 rpm for 300 minutes at room temperature. The result shows, the optimum ratio obtained for composite mixture absorbent is (1:3) and the concentration capacity achieved for the ratio was 870 mg/L and 496 mg/L for NH3-N and COD, respectively. The Langmuir and Freundlich isotherm studies for NH3-N and COD presented the adsorption mechanism that occurs on the composite adsorbent is physical and chemical reaction by obtaining the R2 in both model (< 1) respectively during the experiment.

Malaysia has high rates of accelerating faster on depleting activities compared any other tropical countries in the world. This problem also affects the economic losses of some countries that face deforestation. To overcome this, Napier grass from non-wood was chosen between new methods by xylanase enzyme treatment for pulp production. This study going through the morphological characterization, pulpability at kappa number and the characteristic for biochemical pulping process. These conclude that biochemical had a high percentage of pulp yields; with a low screening rejects; good Kappa number by TAPPI method. Thus, xylanase enzyme has a potential to be sub-treatment for Malaysia’s pulp and papermaking industry to produce a good waste-wealth product in future.

There are quite a lot of paper mill rejects (PMR) as a by-product of paper mills and have not been utilized, currently. The purpose of this study is to evaluate the characteristics of paper mill reject (PMR) to coal and natural biomass and estimate the greenhouse (GHG) emissions of PMR and coal. Coal and PMR taken from five paper mills were analyzed for the content of moisture, proximate parameter (ash, volatile matter, fixed carbon), sulfur (S), gross calorific value (GCV), ash mineral and ash fusion temperature (AFT). The slagging factors of materials were calculated and evaluated. The resulting greenhouse gasses (GHG) emissions was also estimated. The results show that with the high calorific value, low ash and sulfur content of PMR, it has the potential to be used as a coal mixture for boiler fuel. It is very beneficial for the environment due to the low SO2 emissions. PMR has the characteristics of a low slagging index (SI), high fouling index (FI) and Slag Viscosity Index (SVI) which is almost similar with biomass, empty fruit bunches (EFB) and rice husk. The use of PMR as a coal mixture in paper mills in the amount of 10,285 ton/year can reduce greenhouse gases of 63.5 tons CO2-equivalent/year.

Paper made from natural fiber of ampel bamboo (Bambusa vulgaris) and nano-activated carbon from sawdust had been tested as food packaging and showed its ability to maintain freshness and nutritive value of foodstuffs. However, as a packaging material, natural degradability of this alternative natural-fiber paper is required to be tested. This study aims to determine the effect of nano-activated carbon on paper’s biodegradation properties. The results showed that paper treated with nano-activated carbon degraded faster in the soil compared to paper made of bamboo fiber only (control) after 8 weeks of observation. The microorganism population density analysis showed that the paper with nano-activated carbon had a lower microorganism density than the control which accompanied by a decrease in paper weight after 12 weeks of observation. This finding demonstrates the potential utilization of nano-activated carbon as an additive to be inserted into paper to accelerate the biodegradation rate of paper in the soil. The ability of paper to be degraded naturally is very important to support environmental sustainability.

Wood-based forestry industries are one of the strategic sectors in the development for providing a good impact in ecological and socio-economic in a country. Such an industry should have high productivity in order to ensure sustainable resources and an efficient manufacturing process. Based on this fact, tree breeding program is one of the good practices which could be done through the hybridization method to increase the uses from forest genetic resources. This paper presents a review on the basis of the utilization of inter-specific Acacia hybrids resulted from hybridization between two species of Acacia mangium and Acacia auriculiformis for supporting the pulp/paper industry and increasing the forest biodiversity in Indonesia. Improving some traits relevant to the industrial requirements is the main target in the development of Acacia hybrid. This involves fast growth, good wood properties, and tolerance to pests and diseases. The Acacia hybrids could provide some advantages in overcoming the current problems of the forest plantation and industry in which some of them could not be resolved by planting the pure species. In addition, the varies of the Acacia hybrid progenies could be used to increase forest biodiversity, which is important as a genetic base for further breeding purposes and challenges.

The main object of the study is to research Double A’s water treatment programs to give good suggestion to other factory that face the pollution problem and analyzed the development trend of waste-water treatment. To do an integrated analysis of the environmental problems caused by printing paper production is essential for improving the understanding of effective management of the environment in Thailand. Therefore, the overall objective of this paper is to analyze the environmental pressure of the printing paper industry in Thailand, and to identify options to reduce this pressure and evaluate their cost-effectiveness.

The aim of this study was to assess the possibility of using wastes from pulp and paper industry as metal corrosion inhibitors. We studied protective properties of various systems, including the primers with rust modifiers developed on the basis of sulfite spent liquors and an upper coating layer of PF-115 enamel applied to a rusty surface. Using the gravimetric method and the method of polarization curves, we found that sulfite spent liquors inhibit steel corrosion in an acidic environment. We found that the P-2 rust modifier with an addition of lye + piperidine is the most effective inhibitor of steel rusting.

Geometrical plan lacks on existing streets would prompt an expected mishap, for example, a mishap occurs at the sharp bends, layered asphalt conditions, and dangerous asphalt surface. Street auto collision has been expanding in the Southern Region of Tigray, of which this region was appeared to have disturbing rates. As indicated by the Southern Tigray Regional Police, the more rate of street car crashes were recorded in Garhi, Brimah pull and jekhani regions. This examination study zeroed in on the investigation of auto collisions identified with mathematical plan boundaries of the current black top street. While the information for the investigation covered course information, auto collision report from the police headquarters containing a few wounds, crashes, and destroyed the properties, just as meetings and poll studies to individuals who are straightforwardly engaged with street voyages, are thought of. The essential information has basically covered the math of the street which was estimated during the site study, street security review utilizing the agenda, meeting, and poll study. Then again, the auxiliary information gathered from the traffic the executive’s office in the area workplaces. On this, the outcomes introduced as line diagrams, pie outlines, figures for street car crash and sketch for the proposed improvement in the street plan issue. In view of the aftereffects of the investigation in the year 2015 to year 2019, it discovered that there were 1866 Road Traffic Accidents have been happening nearby the overview street areas. It uncovered that the essential driver of street car crashes in the investigation region exuded from the street plan components because of some mathematical lacks at the auto collision inclined regions uncovered that the essential driver of street car crashes in the examination region radiated from the street plan components because of some mathematical insufficiencies at the car crash inclined regions. Hence, this investigation reasoned that the recurrence of event of street auto collisions and the figure of setbacks is altogetherexpanding. This street mishap would endure if the concerned offices don’t satisfactorily address the disease.

This study aims to estimate the shelf life of Bolu Cukke packaged in parchment paper using the Accelerated Shelf Life Testing (ASLT) method. The critical water content parameters in Bolu Cukke are its aroma and its texture. The equilibrium moisture content was obtained from six types of saturated salt solution in the humidity chamber with 7-84% RH. Isothermal sorption curves are obtained by plotting Aw with equilibrium moisture content (Me) which would be tested using five isothermal sorption equation designs to obtain the Mean Relative Deviation (MRD) value. The lowest MRD value is 9.2 obtained from Hasley’s Isothermal equation design. All variables were then collected using the Labuza equation. The results of this study indicated that the estimation of shelf life of Bolu Cukke products in the parchment paper packaging at 30°C with 78% RH is approximately 7 days.

One of the ways to diversify squid products into ready to eat food that has the potential to be developed is paper squid. The main stages in paper squid processing are drying under the sun, pressing, and drying in oven. This research aims to determine the proximate and the amino acid profile contained in paper squid (Loligo edulis, Hoyle). The proximate analysis results showed that paper squid contains 8.25% of moisture content, 3.65% of ash content, 72.28% of protein content, and 11.96% of carbohydrates content. Amino acids detected in paper squid are 15 types of amino acids consisting of 9 essential amino acids and 6 non-essential amino acids. The highest essential amino acid in paper squid is arginine containing 6.24% and the lowest is histidine which is 1.43%. The highest non-essential amino acid in paper squid is glutamic acid which is 12.13% and the lowest is tyrosine which is 2.49%.

Currency is one of the most frequently passed items in the world. It used every day and every way, and it could act as an important vehicle for cross-contamination. This research was aimed to determine how long pathogenic bacteria can survive on currency paper, four pathogenic bacteria including E. coli, Staphylococcus aureus, Pseudomonas aeruginosa, Bacillus subtilis were provided according to laboratory standard methods. Sterile pieces of currency paper were inoculated with the pathogenic bacteria and the survival of bacteria was tested over seven days. The results showed that all tested bacteria differed in time of survival and this survives according to environmental conditions, the type of bacteria and the mode of its resistance, but they were stable and still cultivable after seven days. The second part of this research was to design a simple experimental model to check the efficacy of germicidal and attempted to use ultraviolet light radiation to evaluate the inhibitory effect of most pathogenic microorganisms on currency as a disinfectant. The results revealed that UV is an effective tool, so we recommend using it as a disinfectant for currency.

Pulp and paper sludge contains cellulose which has a possitive potential as compost material. This study aims to examine responses of jabon (Anthocephalus cadamba) seedlings planted in Ultisol and peat media with addition of pulp and paper sludge compost. Before composting, the sludge was air drained to reduce water content from 80.92% to around 60-70%. Bio decomposers consist of a combination of P. citrinum and P. oxalicum with a density of 107 ml/spores were inoculated to the sludge and incubated for six months. Compost of sludge was added to grow media (ultisol and peat) with doses equal with 2, 4, 6, 8, 10, 12, 14 and 16 (ton/ha). Control treatment consists of fertile soil as a negative control, and Ultisol and peat soil with chicken manure compost addition as a positive control. Seedlings height and diameter measurement were held for six months. Both in ultisol and peat media, the addition of chicken manure compost was better in raising seedlings height and diameter. However, the sludge compost addition in peat media was better in raising the seedlings biomass than those added with the chicken manure compost.

Placing indicators on the packaging is a solution that can be used to monitor the quality of food packaged. The application of indicators to packaging technology is known as smart packaging. Filter paper is one paper that can be used as an intelligent packaging element that functions as an indicator because it can absorb pH indicator solutions that are applied to monitor the freshness of meat. The research objective was to make smart packaging indicators that have high sensitivity to amine compounds such as ammonia, indole, and cadaverine; thus, it can monitor the quality of meat stored at cold temperatures. The filter paper used was Whatman number 1 filter paper which soaked with pH indicators namely Phenol Red (PR); Phenol Red (PR) + Bromothymol Blue (BTB), and Bromothymol Blue (BTB). Smart packaging was applied to packaged fresh meat and stored in cold temperatures. During the storage, the results of the microbial and enzymatic decomposition of proteins and amino acids in fresh meat such as ammonia, indole and cadaverine compound accumulated in smart packaging indicators and cause color changes in the paper indicator. The results obtained indicated that the utilization of filter paper with PR + BTB immersion had a significant sensitivity of color change that can be used to observe changes in the quality of fresh meat stored in cold temperatures.

As a new protein feedstuff, paper mulberry has the characteristics abundant nutrition, high protein content and good palatability, and has great development potential. In this paper, the feeding value of mulberry, the feeding method and the application in animal feeding are reviewed, which provides reference for the wide application of mulberry in animals breeding.

This paper introduces a new type of moisturizing paper, which makes the material have a stronger moisturizing effect than ordinary transfer paper through the water-based double-layer coating process. At the same time, the paper has a stronger degradation capacity than plastic film paper, more in line with environmental protection requirements. Through the paper printing machine adaptability verification, the paper has easier processing and stronger printing performance. The development and application of this moistening material is a major innovation in the field of moistening packaging materials research.

Now, the need for porang seedlings is very urgent, so it is necessary to provide seedlings in a short amount of time. Among the sources for propagation of porang, the use of seeds as planting material promises to supply large quantities of seedlings. The initial step of preparing the seedlings is germination. The success of germination determines the next step. The purpose of this study was to examine the effectiveness of using trays and jars in reducing infection rates and to determine the rate of germination of porang seeds. This study used a complete random design with 3 replications. Each replication consisted of 50 seeds. While data analysis used unpaired t-test. And the germination method used the top-on-paper method (TPM). The observed-parameters included germination rate at 7 days after planting (dap), 17 dap, and 30 dap; percentage of seed contamination at 7 dap and 11 dap; the percentage of the number of sprouts rooted at 28 dap and 42 dap. The results showed that the percentage of germination using trays and jars at 7 dap, 17 dap, or 30 dap were not significantly different. Seed contamination at 7 dap and rooted-sprouts at 28 dap were not significantly different between tray and jar. However, for seed contamination at 11 dap, the tray produced higher contamination than the jar and the results were significantly different. As for the rooted sprouts at 42 dap, the trays produced lower rooted sprouts than the jar, 44.67% and 89.33% respectively and significantly different. The conclusion of this research was that germination on top-paper method using a jar was better than a tray

Peppermint oil was one of the essential oils with an antibacterial bioactive component and the potential to be used as an antibacterial label. The purposes of this research were preparing the antibacterial label and evaluate their activity in prolonging the storage of shrimp. Antibacterial label was created by loading the peppermint oil onto the recycled paper as a matrix. Peppermint oil was characterized with Gas Chromatography-Mass Spectrometry (GC-MS) to identified suspected antibacterial activity compounds. The results showed that peppermint oil contains 39.79% of menthol and 35.69% of menthone as the main component. Peppermint oil and antibacterial labels have been screened for Gram-positive bacteria Staphylococcus aureus NBRC 100910 and Gram-negative bacteria Escherichia coli NBRC 100910 using the paper disk diffusion method. Peppermint oil has antibacterial activity in both bacteria, and the label only have antibacterial activity in E. coli NBRC 100910. The antibacterial labels research on prolonging the storage of shrimp shown that the Total Volatile Basic Nitrogen (TVBN) value was lower than without using the label. The results on this study showed recycled paper filled with peppermint oil can be used as an antibacterial label for an active packaging system.

In order to improve the permeability of low permeability coal seam, improve the gas drainage efficiency of + 450m bedding boreholes in Gaohe mine, and ensure the safe and rapid excavation of + 450m level north wing air inlet roadway, ZGF-100 (a) type ultra-high pressure hydraulic slotting device suitable for the characteristics of 3 coal seam in Gaohe mine is developed. The feasibility and implementation scheme of high pressure water drilling and slotting integration technology are studied, and the slotting effect is preliminarily analyzed investigate. The research shows that the technology of using ultra-high pressure water to cut coal seam to cause cracks and increase permeability can effectively conduct the original cracks in the coal body, increase the gas drainage effect of boreholes along the seam, increase the drainage pure quantity by 1.8 ∼ 3.6 times, increase the effective drainage radius from 1.3m to 2.4m, and reduce the drilling engineering quantity by more than 50%. Hydraulic cutting technology can effectively improve the gas drainage efficiency of low permeability coal seam, which is worthy of promotion.

Paper waste derived from the campus environment is paper waste which is generally a waste of tasks. Through knowledge, creativity, and paper waste skills can be utilized into something useful, having high artistic value. The purpose of this research is to increase the aesthetic value of paper waste with the process of reuse as a learning medium for wig making. Through the utilization of paper waste with the reuse process is expected to make something useful and valuable art. Qualitative descriptive development research was conducted to increase the aesthetic value of paper waste as a medium of learning wig making in hairpiece courses that have art value with the reuse process. validity results by 5 experts with an average of 97% and final product assessment results by 50 students obtained an average of 87.2% based on indicators of usability, design, flexibility, beauty, and creativity expressed to increase the aesthetic value of paper waste with the process of recycling as a learning medium of wig making is very feasible.

Paper pulper machines a capacity of 83 litres/process must have a low-cost material, robust and safe to operate. Paper pulper machine components analysed are tubes, frames, helical screw shaft and the shaft holder. The method uses a static structural analysis to obtain von mises stress and displacement. Static structural analysis uses finite element analysis with the help of CATIA® Software. The safe component size and lowest cost (safety factor more than 2.5) were selected in this study. Calculation of costs by multiplying the size of the material needs by material prices. Tube components use SUS 304 with thickness variations of 0.5, 0.6, 0.8, 1, 1.5, and 2mm. Frame and shaft holder using L shape ASTM A36 size 40x40mm and 50 x50 mm with thickness variations of 3, 4, and 5 mm respectively. Variations in material size are determined based on standard material sizes available on the market. The simulation result of each component shows the thicker the material, the lower the von mises stress, the lower the displacement and the higher safety factor. Tubes with a thickness of 0.5mm have a von mises stress of 4.43 MPa, a displacement of 4.7 x 104 mm with SF 56.4 is safe and were chosen because of the lowest material costs (IDR 360,009). The frame size was chosen 40x40x3 mm based on the SF frame value (26) with the lowest material cost (IDR 197,800). The shaft holder is also chosen for the size of 40x40x3mm where the SF value (3834) and the lowest material cost (IDR 14,400). Helical screw shaft size is chosen at 0.5mm thickness where SF is 304 and material costs IDR 100,968. The overall results of the static structural analysis on various sizes of the paper pulper machine components showed ovon under Oyield, small displacement, and SF is safe.

Paper honeycomb sandwich plate is often used as transport packaging for the good cushioning and vibration isolation properties. However, the change of relative humidity has a great influence on the vibration performance of paper honeycomb sandwich plate because of its strong water vapor absorbing characteristics. In order to avoid the system resonance and reduce the product vibration damage, the main resonance frequencies for the paper honeycomb packaging system were evaluated by the sinusoidal vibration tests, further the effects of relative humidity, static compression stress, and the geometric parameters of honeycomb core on the main resonance frequencies were investigated. The results show that the main resonance frequency decreases with the increase of relative humidity, static compression stress, honeycomb cell length, and plate thickness.

Fish ladders are structures that are designed and constructed at water barriers, such as dams, to assist fish to migrate and complete their life cycle between different habitats without interruption or delay. The design of the fish ladders is considered a complicated process. It depends on two essential aspects; the biological and environmental nature of the fish. Consequently, hydraulic parameters such as velocity, turbulent kinetic energy, and flow patterns have to be designed to suit the fish’s capabilities without affecting it. This study is dedicated to performing an overview of the design of one of the most common fish ladders, the vertical slot fish ladder. A brief on an empirical and numerical design method is presented first. Then, a review of the recent literature on the vertical slot fish ladder design is explored. From reviewing several works on the design of the vertical slot fish ladder, it was found that important design parameters, such as the velocity of the flow, the turbulence, the slope of the fish ladder channel, have already been investigated in previous studies. However, it was observed that other important parameters, such as the slot angle, have not been investigated or explored in the literature. It is predicted that this parameter has a vital influence on the velocity of the flow inside the fish ladder which controls all other design parameters.

Paper mulberry (Broussonetia papyrifera L.) is a type of emerging feed and very popular with its high nutrition and low-cost value. Purpose of the experiment was to evaluate the nutrient contents, amino acids content and in vitro ruminal dry matter digestibility of paper mulberry cut at four different heights (60, 90, 120, and 150 cm). Paper mulberry harvested at 60 and 90 cm increased the content of crude protein water-soluble carbohydrate, calcium and total amino acids (P0.05), but the lowest content of condensed tannin was measured at 150 cm (Pin vitro ruminal dry matter digestibility, the sample cut at 150 cm was the lowest in all samples (P

The quality assessment of activated sludge of biological treatment facilities of pulp and paper mill depending on the type of load is given. Considered three cases of the load on the activated sludge and given their characteristics in the sedimentary and hydrological indicators under conditions of variable load. Depending on the type of load, there is a satisfactory operation of activated sludge, or its swelling caused by the bacteria Zooglea ramigera or filamentous forms of microorganisms.

The peculiarities of the radial growth of pine in the conditions of air pollution in the Arctic zone are considered. The results of measurements of the width of annual rings of pine growing at different distances from the emission source are presented. The variability of annual radial growth of pine trees varies in a wide range: from moderate to very high. Age changes in the width of annual rings of pine are corresponding to the regularities of the curve of the "large growth". The average annual radial growth begins to decrease in plants older than 70 years. The dependence of the average annual radial growth of pine on age is approximated by an exponential equation. The accuracy of the approximation (coefficient of determination) is very high. Comparative analysis of the width of the annual rings and the value of gross emissions of the APPM in the year of formation of the annual layer did not show a clear synchronicity or asynchrony in the dynamics of these indicators for all plots. In most cases, the relationship between the total annual emissions of the APPM into the atmosphere and the width of the annual rings of pine was insignificant. The analysis of dendrochronology did not reveal a significant influence of atmospheric emissions of the Arkhangelsk pulp and paper mill on the growth of pine. The correlation coefficients between total annual atmospheric emissions and radial annual increments did not show a relationship between them, both when comparing these parameters year-on-year and with a delay of one year. For the period from 2001 to 2018 significant direct or delayed negative effect of emissions from Arkhangelsk pulp and paper mill in the atmosphere in the investigated areas of pine forests have not been identified.

The leachate wastewater from pulp and paper industry is known containing various types of heavy metals, the contamination of heavy metals contained in industrial wastewater which is released to water body will accumulate and eventually pollute the environment. The improper wastewater disposal by industries does not only greatly reduce marine vegetation and animal life but also contributes to the destruction of aquatic ecosystem. It is necessary to do the wastewater treatment to eliminate or at least to reduce the heavy metal content to the legal standard quality. One of the most commonly method used for wastewater treatment is adsorption, this study uses the adsorbent made from the mixture of clay and activated carbon formed into ceramic balls with the size of ± 0.5 cm in diameter. The ratios of clay and activated carbon are 6:1, 6:2, 6:3, 6:4 and 6:5. The pulp and paper wastewater treatment method is conducted by contacting wastewater containing Pb with the adsorbent in a column made of glass of 2 inches diameter and 50 cm length, contact time variations are 30, 45, 60, 75, 90, 105, 120, 135, 150, 165, 180, 195, 210, and 240 min. The most favorable result is 92.45%, the adsorbent is able to reduce the Pb concentration from 0.53 mg/L to 0.04 mg/L respectively at 180 minutes contact time with adsorbent ratio of 6:5.

The review outlines the achievements in the field of research and identification of the kurunga and koumiss microflora. These are mixed fermentation sour milk products with similar healing properties. The paper represents information on the structure of spontaneously formed natural communities of the drink microflora and the probiotic properties of the cultures isolated. It has been found that the cultures isolated are bile- and acid-tolerant, exhibit high exopolysaccharide synthesizing activity, as well as cholesterol-degrading and antibiotic activity. The koumiss’ ability to inhibit angiotensin-converting enzyme is shown.