Search

Anode surface plays important role for extracellular electron transfer (EET) of exoelectrogenic microbes in microbial fuel cell (MFC). In this report, the electrochemical performance of a TiO2nanorod array modified carbon paper electrode (TiO2NRs/CP) is greatly improved by controlled chemical etching process. The etching process keeps the array morphology but yields obvious hollows on tops of TiO2nanorods. The etched electrode (TiO2NRs-HOT/CP) exhibits better hydrophilicity than carbon paper (CP) and TiO2NRs/CP electrode as seen from smaller contact angle (CA) and more attached microbes S.loihica PV-4. Meanwhile, the hollows allow higher local concentration of microbial self-secreted flavins that can act as electron mediators for interfacial electron transfer of PV-4 through in-direct pathway. Accordingly, PV-4 produces larger current density at TiO2NRs-HOT/CP electrode with maximum current density of 0.038 mA cm–2, which was much higher than that at CP electrode, and almost five times higher than that at un-etched TiO2NRs/CP electrode.

In this study, 12 commercially available paper towels were collected from the local market. Their tensile properties were investigated by Kawabata Evaluation System for Fabric (KES-F). Four tensile properties namely: (i) extensibility (EMT), (ii) tensile energy (WT), (iii) tensile resilience (RT) and (iv) linearity of WT (LT) were evaluated. Experimental results revealed that the tensile properties varied within the products. EMT was used as the key property for discussing the tensile properties of paper towels. However, when the different tensile properties were correlated, it was found that WT/RT, WT/EMT and RT/EMT had strong Pearson correlation. In addition, there was no significant statistically relationship between weight and thickness to EMT. Based on this study, it can provide some information about the tensile properties of paper towels in local market which may help the industry for further improving the product quality.

In this study, we chose 12 commonly available paper towels from the local market. The compression properties of the paper towels were examined by Kawabata Evaluation System for Fabric (KES-F). Three compression properties namely: (i) compressional linearity (LC), (ii) compression energy (WC) and (iii) compressional resilience (RC) were examined. The experimental results revealed that the compression properties varied within the different paper towels. RC vlaue was used as the key property for discussing the compression properties of paper towels. When different compression properties were correlated and analysed, it was found that no relationship was noted within different compression properties. On the other hand, there was not significant statistically relationship between weight and thickness to RC. It is hope that the results from this study can help the indurstry to improve the compression properties of paper towels for local market.

In this paper, we collected 12 commercially available paper towels from the local market and their shearing properties were evaluated by Kawabata Evaluation System for Fabric (KES-F). Three properties namely: (i) shear rigidity (G), (ii) shear stress at 0.5º (2HG) and (iii) shear stress at 5º (2HG5) were studied. Experimental results revealed that the shearing properties varied within the products. G was used as the key property for discussing the shearing properties of paper towels. However, in correlating different shearing properties, it was found that 2HG and 2HG5 had strong Pearson correlation. However, no significant statistically relationship between weight and thickness to G was found. This study may provide data for the industry for the improvement of shearing properties of paper towels for local market.

12 commercially available paper towels were collected from the local market and studied in this paper. Kawabata Evaluation System for Fabric (KES-F) was used for evaluating their bending properties. Two bending properties namely: (i) bending rigidity (B) and (ii) bending moment (2HB) were evaluated. Experimental results indciated that the bending properties varied within the products. B was used as the key property for discussing the bending properties of paper towels. When the correlations of different bending properties were investigated, it was found that no significant was found between B and 2HB. However, there was significant statistically relationship between weight and B but no relationship between thickness and B. With the use of the results, the product developer could improve the bending properties of the paper towels.

In this study, 12 commercially available paper towels were collected from the market. Their shearing properties were evaluated by Kawabata Evaluation System for Fabric (KES-F). Three properties namely: (i) coefficient of friction (MIU), (ii) deviation of MIU (MMD) and (iii) geometric roughness (SMD). Experimental results revealed that the surface properties varied within the products. When different properties were correlated, it was found that there was not significantly relationship between MIU, MMD and SMD. However, weight and thickness had well statistically relationship to SMD.

As a kind of environmentally friendly material, microfibrillated cellulose (MFC) has the following advantages: renewable raw materials, easy recycling, biodegradable, safety and so on. It can be combined with antibacterial agents to prepare the antibacterial packing materials for food. In this paper, the nano-ZnO was modified by titanate coupling agent TM-38s at first,determines the best dosage of TM-38 is 3% in the modification process,the dosage of the isopropyl alcohol for 40ml,improving its dispersibility. And then added in the MFC suspension to formulate the antibacterial coating for antibacterial coated paper preparation. The changes of antibacterial properties of the paper before and after coating were investigated in this study. The results showed that the paper had a significant antibacterial activity to e. coli and staphylococcus aureus (the antibacterial circle was bigger than 15 mm).When the nano-ZnO dosage was 2.5wt%, the antibacterial properties of the coated paper could reach the best situation. Application of the antibacterial caoated paper to the food packaging could restrain and kill the microorganisms on the food surface effectively, prolong the shelf life of food, and improve the food safety.

As an important document for the description and communication of transport policies, transport white papers have drawn special attention in western countries. This paper studies European transport white papers with the aim to explore their merits for reference. Firstly, the paper reviews the chronological development of European transport white papers to give a holistic view. Then, three European transport white papers that have critical historical meanings are analyzed in details, inspecting their issue background and policy objectives. Moreover, the features of European transport white papers are summarized, which include the concentration on chief problem, thorough action plan and flexible content system. These features deserve learning for other authorities when developing transport white papers.

Noise is one of the problems that often occur in urban areas due to the traffic condition. Noise in a building design depends on the choice of materials as sound absorbers. The type of sound dampening material that already exists is a porous material, a resonator, and a panel. The material often used as an absorber is porous materials, because it is relatively cheaper and lighter, especially to reduce the noise in the narrow spaces such as housing and offices. Various substitutes are made from cheap materials, such as the use of recycled materials of egg tray paper with the size of 40 x 40 centimeters. This is a quantitative research that will measure the place of egg tray paper in reducing noise, using a Sound Level Meter. The use of the egg tray paper is able to show an adequate acoustic quality as noise absorbers, with the average value of NR 22-26 dB.

This paper defines the efficiency similarity of different motor driving devices. Based on the efficiency function characteristics which can be approximately considered a concave, non-negative function through the origin, we present a kind of optimal control method for a felt driven by three different motors in paper machine. It gives the minimum total power consumption. The optimal control method is to keep the same torque rate for each motor driving device. This method is independent of the linearity or nonlinearity of the system and has no need for the system’s state equation or transfer function. Since the shapes of efficiency functions in nature are similar, the conclusion can also be applied to the energy optimization of other general devices.

This paper mainly discuss the effect of beating on OCC pulp fiber morphology and paper physical Strength. After the treatment with PFI, the beating degree were ranged from 25 ° SR rises from 56 °SR, the fiber morphologies were greatly changed, and appeared splitting and brooming. Physical results showed that beating can improve strength properties of OCC pulp in the proper degree, 46°SR was the best result in this study.

Noise pollution is a workplace hazard which causes loss of hearing, depending on the sound pressure level and duration of exposure. Because duration of exposure is usually uncontrollable, sound absorbers are used to reduce the value of sound pressure level. A common method to reduce noise is to use porous sound absorbers made out of mineral wools or glass fibres. However, these materials pose health risks and are non-recyclable. This project aimed to fabricate a sound absorber using recycled paper which is in the form of egg cartons as an alternative to the abovementioned fibres. Paper fibres posses high fibre porosity and can be manufactured in a manner which the properties can be easily controlled, making them ideal to be made into sound absorbers. Furthermore, they are biodegradable, do not pose health risks and can be manufactured into different shapes easily. Recycled paper was first turned into pulp, blended and poured into moulds. Different amounts of pulp was compressed until the sample size was approximately 20 mm thick and then dried in a furnace dryer at 600C for 12 hours. The samples were tested using a two-microphone, transfer function impedance tubes according to the ISO 10534-2 standard. Its porosity was determined using a modified wash basin method. The results indicate that the optimum panel has an average noise reduction coefficient, (NRC) of 0.50, which qualifies it to be used as a sound absorbing material. It also encounters its maximum value of 0.98 which occurred at the 1575-1675 Hz range. When compared to other materials, recycled paper has similar properties as coir fibre and is quite comparable to other commercial sound absorbers at the same thickness.

The feasibility of pulp and paper mill wastewater sludge as substrates for biogas production was evaluated in labrotory scale. Also the influence of pre-acidification, feeding modes and sludge concentration on anaerobic digestion system were studied.

In order to study the corresponding relationship between the design and fashion of tea gift package, this paper will analyze and discuss the color design and packaging style of tea gift package. Besides, this paper will also do research on the cultural origin of tea and the value of package, and analyze the influence of package on consumers. Finally, based on the research, the author had design a tea gift package that is in accordance with the current trend. This study uses bright yellow and orange as predominant colors to present nobleness of tea of Alishan. The colors used on the packaging will render people associate with harvest in autumn.

The quality of product of manufacturing industries depends on dimension accurately and surface roughness quality. There are many types of surface defects and levels of surface roughness quality. Ironing process is one type of metal forming process, which aims to reduce the wall thickness of the cup-shaped or pipes products, thus increasing the height of the wall. Manually surface inspection procedures are very inadequate to ensure the surface in guaranteed quality. To ensure strict requirements of customers, the surface defect inspection based on image processing techniques has been found to be very effective and popular over the last two decades. The paper has been reviewed some papers based on image processing for defect detection. It has been tried to find some alternatives of useful methods for product surface defect detection of ironing process.

Paper defects mean that there are some defects in the paper such as hole, emboss, and fold during the paper production, which mainly results from the limitation of technological level. In the past time, artificial visual inspection and off-line checking were often used to detect the paper defects. However, its shortcoming was highlighted along with the improvement of industrial technology level and increasing demand for paper. In order to realize the online detection and markers for paper defects, the project designs the on-line detection system based on line-scan digital camera. Firstly, the principle and detection scheme of the system for the paper defects was presented. Then the overall structure of the system was designed. After that, the hardware circuit of the system was designed using TMS320F2812 as main control chip. It mainly consists of the function of each module and the working process of the system. Finally, the software of the image acquisition system was presented. With the experimental verification, the system has advantages of low cost, high efficiency and strong resistance to interference. The functions and indexes achieved the design requirements.

In paper dryer section of the paper machine, paper dehydration is small, but the steam consumption for the process of dehydration is very large, this steam consumption has a great influence to the total steam consumption of the whole papermaking process. A method optimization of the dryer section based on genetic algorithm is proposed to reduce the dryer section steam consumption, which can reduce the total steam consumption of the papermaking process. After analyzing steam consumption of the whole drying process, the result is that the temperature of dryer section air is the key factor that influences the steam consumption. The model of paper machine dryer section is build with supply air temperature as a variable and steam consumption as the objective function, then using the genetic algorithm to optimize the supply air temperature. Simulation results show that after optimizing air temperature by genetic algorithm steam consumption of papermaking process is further reduced.

In this paper a new method is proposed for intelligent sort of battery from waste paper based on Invariant Moments and Fractal Dimension (IMFD). In IMFD, a new distinctive feature that based on the edge contours is extracted to describe the target picture. At first invariant moments technique is used to extract Hus seven moments as the global descriptors from the target image. Then the fractal dimensions are extracted as local invariant descriptors by using Fractal Dimension. At last, a combing descriptor is built according the distinctive feature, which combines the global descriptor and the local descriptor together. The features are highly distinctive, and can be matched with high probability against a large database of features. The practical tests performed in this article show that the proposed method has a significant effect on increasing the stability, the accuracy of classification, and also can effectively against the huge-information during the image processing.

In order to research the relationship between ink permeability and dot gain of different paper, four kinds of coated paper and two kinds of printing paper were chosen. Ink marks method was used to measure ink permeability of four kinds of coated paper and two kinds of common printing paper. After the ink marks were printed on each of the six kinds of paper, the length of them were measured, then the reciprocal of the ink marks length was multiplied by 1000 to obtain the value of the ink permeability. Inkjet printer was also used to print yellow GATF step-wedge simulating offset printing on the six kinds of paper, then using an optical densitometer to measure the dot gain. Conclusion shows that non-coated paper is higher in permeability than coated paper, which results in high percentage of dot gain.

In order to realize precise control of the vertical inverting feeding of paper, the paper proposes the scheme to analyse the accuracy. Based on the geometric constraint relations of the feeding device, the position constraint equation of the device is established, together with the speed-acceleration formula; and the relationship between the paper inverting deviation angle and its drop height is obtained using the general equation of dynamics of the horizontal projectile motion as vertical inverting accuracy analysis of the device. The results of the study show that the precise control of the vertical inverting feeding of paper can be realized through the control of the angle.

This paper presents the performance investigations of the spatial domain image watermarking for camera-captured images on different types of printers and printable materials. We examine the effects of our previous watermarking method based on the modification of image pixels on three types of printers, i.e. inkjet, laser and photo printers, and four different types of printing papers, i.e. uncoated, matte, glossy and semi-glossy papers. In the experiments, the DSLR camera is used as tool to capture the printed watermarked images, while the image registration technique based on projective transformation is used to diminish the RST and perspective distortions in the captured image. The performances in terms of extracted watermark accuracy at equivalent watermarked image quality on different types of printers and printing papers are measured and compared.

In this paper, we presented an approach to control on the total hardness over the wastewater treatment recycling process for pulp and paper mill. The main problem, however, is the effects of Ca2+ concentration on the recycling treatment process. The experiments were conducted by using coagulation method with reagents of Ca(OH)2 addition alone and Ca(OH)2 +PAC addition respectively to control on total hardness. The samples were collected from the effluent and the influent of the biological treatment tank respectively of the wastewater treatment plant in a pulp and paper mill. The experimental results identified that the optimum reagent addition position was in the effluent of the biological treatment tank. When addition Ca(OH)2 alone, the optimum Ca(OH)2 addition amount was 2g/L, as a result, 70.1% of total hardness was removed ( from 1088.05mg/L down to 325.16mg/L), pH value was from 7.23 to 8.61, and sludge volume ratio was 9.9%. When addition PAC+ Ca(OH)2 , the optimum Ca(OH)2 addition amount was 1g/L, the optimum PAC addition amount was 300mg/L respectively, as a result, 71% of total hardness was removed( from 1088.05mg/L down to 315.25 mg/L), pH value was from 7.23 to 7.66, and sludge volume ratio was 6.5%. The effluent-quality can meet the National Industrial Wastewater Recycling Standard on the total hardness of 450 mg/L requirement. The reagents of Ca(OH)2 +PAC had many advantages over Ca(OH)2 alone , such as less sludge quantity, high density of sludge, small volume of sludge, and less addition of reagents and so on.

This paper describes simulation of combustion characteristics under high ambient and high injection of biodiesel combustion by using CFD simulation. Diesel engine performance and emissions is strongly couple with fuel atomization and spray processes, which in turn are strongly influenced by injector flow dynamics. The principal objective of this research is to seek the effect of temperature and pressure on the spray characteristics, as well as fuel-air mixing characteristics. Experiments were performed in a constant volume chamber at specified ambient gas temperature and pressure. This research was continued with injecting diesel fuel into the chamber using a Bosch common rail system. Direct photography technique with a digital camera was used to clarify the real images of spray pattern, liquid length and vapor penetration. The method of the simulation of real phenomenon of diesel combustion with optical access rapid compression machine is also reviewed and experimental results are presented. The liquid phase of the spray reaches a maximum penetration distance soon after the start of injection, while the vapor phase of the spray continues to penetrate downstream. The condition to which the fuel is affected was estimated by combining information on the block temperature, ambient temperature and photographs of the spray. The increases in ambient pressure inside the chamber resulting in gain of spray area and wider spray angle. Thus predominantly promotes for a better fuel-air mixing. All of the experiments will be conducted and run by using CFD. The simulation will show in the form of images.

Tea has been a popular beverage since ancient time and accumulated a great deal of culture. In modern society, tea packaging design attracts a lot of attention. How to reflect the integration of traditional culture and modern culture from the perspectives of shape, pattern and color and cater to consumers needs at home and abroad and make the tea packaging fun has become the key of tea packaging design. The important function of packaging is to attract consumers’ attention and trigger their desire to buy the product. Through the visual design of packaging, it is a vital way to reflect the quality of tea, as well as increase the value of goods. Highlighting the characteristics of tea is the fundamental purpose of packaging. The color, pattern and text attribution are essential element in packaging, meanwhile it conveys the product information. The application of color, pattern and text and other factors in the study make the tea more competitive. It exchanges information between tea and consumer. Good tea packaging can not only improve sales, but also enhance the brand image, and expand spread of traditional tea culture.

Contrasting《Discharge standard of water pollutants for pulp and paper industry》(GB3544-2008) to《Discharge standard of water pollutants for pulp and paper industry》(GB3544-2001), this article educes impact for pulp and paper industry by 《Discharge standard of water pollutants for pulp and paper industry》(GB3544-2008). This article discuss producing technics and dealing with waste water technics of pulp and paper industry, that satisfy GB3544-2008.

This paper describes the use of a printing circuit technology to generate hydrophilic channels in a filter paper. Pattern was first designed using Protel soft, and printed on a blank paper. Then, the pattern was transferred on a sheet copper using a thermal transfer printer. The sheet copper with pattern was dipped in a ferric trichloride solution to etch the whole pattern of the sheet copper. At last, the etched sheet copper was coated with paraffin, then with a filter paper and heated at the other side of the sheet copper with an electric iron. The melting paraffin penetrated full thickness of the filter paper and formed a hydrophobic “wall”. Colorimetric assays for the presence of protein and glucose were demonstrated in the paper-based device. The work is helpful for researching paper-based microfluidic devices for monitoring health and detecting disease.

Rich mineral paper (RMP) has the advantage of being energy efficient, clean and creating no pollution during its production processes, with low production costs, and enjoying naturally complete biodegradability, fully compatible with the emerging demands for energy efficient carbon reducing features and the trend for environmentally green solutions, so if this media can replace traditional paper uses to become a new print media, tremendous environmental efficacy can be expected. So this study aims to discuss the print quality performance characteristics of RMP applications in large print run offset printing operations. The study deploys True Experimental Study methodology, with use of the digital printing test target of Graphic Arts Technical Foundation (GATF), with flat offset printing on traditional coated paper and eco-friendly RMP, printing 800 sheets of each, with systematic random sampling of 35 samples for the study. Quality determinations rely on X-rite i1 Pro for elucidation of the printing quality characteristics for solid ink density, TVI, contrast, gray balance, and color gamut measurement. The results of this study indicate the KCMY solid ink density and contrast of the eco-friendly RMP were less than traditional coated paper; TVI value was higher than traditional coated paper; color gamut performance was less than the traditional coated paper. Optimal gray balance combination for RMP was determined as follows: 7% tone with C7M3Y4, 30% tone with C30M28Y26, 60% tone with C60M58Y5, and 80% tone with C80M76Y66. The study suggests that ink particularly suitable for RMP uses remains in need of development. Additionally, the study found that use of RMP in the paper machinery indicated transverse and longitudinal tensile strength is slightly inferior to the traditional coated paper, resulting in unsmooth surfaces post-printing, for which it is recommended that RMP makers should consider paper machinery structural aspects when pursuing future research on modifying solutions for greater printing efficacy with RMP.

The impact of coated paper printability for image quality on the high-fidelity digital printing was studied in this paper. Compared with the traditional printing technology, high-fidelity digital printing technology is more likely to expand the color gamut, maintain the original tone linear and produce vivid image. The performance of coated paper to a large extent determines the image quality. In order to get high-quality printed matters, the mechanism of the coated paper printability influencing on the performance on high-fidelity digital printing is need to be researched in-depth. The printability of coated paper was studied from several aspects in this paper, including the structural properties, roughness, optical properties, absorption etc, the relationships between these properties and printing color, dot reproduction performance were also studied. Based on the previous theoretical and practical studies, the printability evaluation system of coated paper on high-fidelity digital printing was established initially. On digital printing, accurate color management technology also affects the printing quality as the performance of coated paper, so the advanced color management technology was also used in the current study. The results showed that the pore structure and the absorbent of coated paper were the most important factors for affecting the printing quality, and the roughness and optical properties of coated paper also had a certain impact.

Biopolymers have the potential to serve as coating materials for paper to improve its performance properties. The objectives of this study were to determine the effect of kelp coating on the physical properties of coated papers. It was found that kelp coated paper showed significant difference on physical properties, compared with uncoated. Kelp coated papers greatly increased in tensile strength. Paper coated with kelp solution can be used to produce packages with the potential to be used to maintain agricultural produce quality for the food industry, and may have other applications.

After introducing the principle of ventilation and dehumidification for closed steam hood, the key and difficulty points of its control are analyzed. Aiming at the production line of coating white board with surface sizing and high steam consumption, DCS system of steam hood based on SIMATIC S7-300 PLC is designed. The hardware structure and control algorithms are illustrated in detail. The control system has been applied on the paper machine with nearly 10 board paper plants of the coating white board paper base in Fuyang, Zhejiang province, and the good energy-saving control effect has been obtained.

With the gradually maturing super-speed inkjet printing technology, people are pursuing steadier and higher speed as well as better quality presswork for the sake of increasing economic benefit. To provide an overview of the velocity fluctuation of the inkjet machine platform and the cyclical fluctuation of the incremental encoder, external clock and corresponding internal clock were applied separately to print the equally spaced lines under the same platform speed. Then a magnifier was used to measure distance between the lines, according to which the velocity fluctuation mentioned above can be obtained. Thus conclusion can be drawn from the fluctuation analysis that the velocity cycle of platform is 60mm, however, number of those produced by the incremental encoder is up to 3, including 60mm influenced by the platform, 300mm produced by the perimeter of encoders pressure wheel and 600mm produced by the circumference of dance roller. Furthermore, dance roller contributes more influence on narrow coated paper. Through this research, inkjet technician can do directional compensation for every factors to reduce the fluctuation.

The consumers’ green purchasing decision is the process of matching their own needs and the attributes of the products. Conjoint analysis was used to analyze how the attributes such as the brand, the price, the raw materials, the environmental certification and the fluorescent additives of the rolling paper affect its purchase on the basis of the data from a survey among the consumers in Changsha. The study measured the relative importance of each attribute to the consumers’ decisions and the utilities of the levels of the attributes to consumers. Results showed that the differences of the consumers’ preference can provide strong basis for product management of the corporation.

The combustion characteristics of the mixtures, which are made from different proportions of paper mill sludge and coal, were studied by the thermogravimetric analysis (TG-DTG) at different heating rates. The results showed that there were obviously three temperature zones in the paper mill sludge combustion curves, which is respectively corresponding to two devolatilization stages and a fixed carbon combustion stage. In these stages, the weight of sludge was lost promptly. When the proportions of sludge – coal blends were rather different, ignition point obviously shifted to the larger proportions, and DTG curve was more closed to the larger proportions. During the combustion process of the mixture, the paper mill sludge and the coal had basically maintained their own devolatilisation characteristics. And the comprehensive combustion characteristic index S of sludge-coal blend declined, demonstrating that higher volatility had better combustion characteristics. As the heating rate and the proportions of coal increasing, total weight loss rate increased, while burnout index Cbraised.

This paper aimed at the quality of the transparent paper package, developed a machine vision detection system and successfully applied it in production line. A variety of transparent paper defects are detected out. This system makes the transparent paper packing quality b improved and provides good reference for the application of the technology of machine vision detection.

There are too many waste that has the capability in undermine the environment, including paper waste. The unused paper waste collected from one office only could reach two tons a year. To decrease the possibility of paper waste in ruining the environment, it can be recycled to be any usable things. One example is recycle the paper waste into paper brick as building material. Before the brick can be used, it needs to be tested whether it can create a thermal comfort or not. So the objectives of the research are to find the ability of paper brick in create thermal comfort, and compare it with the red brick that is commonly used by people. The method used in this research is field measurement using model and hygrometer as a tool. The result of the research is that the paper brick can create a thermal comfort in some hours of a day. But it turns out that it is not better than the red brick in decreasing the outside temperature. The temperature inside the building with a red brick is lower that the temperature in the building with the paper brick.

Along with the widespread use of food wrap paper, it is very important to discuss the migration of lead in paper. The migration of lead from six kinds of food wrap papers under different temperatures (5 °C, 25°C, 35°C, 60°C and 85°C) were investigated by using water as an imitation in this paper. It was found that the initial migration rate was affected by the sizing degree of paper, but the final migration ratio was mainly decided by initial concentration of lead in paper, and the migration rate increased with the increasing of temperature.

By using printability tester for printing on ordinary white cardboard and light beam hologram paper, measuring spectral information and chrominance information of the two samples, and then perform spectral fitting by analyses their color characteristics, The aim of this research was to propose one method for color calculation of printing on light beam hologram papers, according to the color information of ordinary white cardboard.

Green and environmental protection has become a theme of contemporary furniture design. As a unique furniture material, paper has characteristics like wide source, easy processing, non-toxic and pollution-free. It has been used in the development and design of furniture. Paper furniture has broad application prospects.

In order to improve the printing quality, 10 kinds of different manufacturers, different gram weight offset paper are used in this title, measure the quantitative, thickness, gloss, K&N values, and roughness of those paper. Print papers through IGTAIC2-5, calculate the ink transfer rate and transfer parameters. Using SPSS to analysis relationship between the performance of paper and ink transfer rate, transfer parameter b, k, f ' by using mathematical methods. The research results show that the performance of the paper affect ink transfer rate and transfer parameter b, k, f '; The tightness, roughness ,glossiness and K&N value have notable effect on the ink transfer rate and transfer parameter k; transfer parameter b, f ' has no remarkable influence.

The experiment studied effects of paper on the height and glossiness of UV ink-jet 3D printing. The results showed that there all existed penetrations between the 1st ink layer and three kinds of paper, the bigger the roughness and bulk of paper were, the larger the penetration was, and penetration between the 1st ink and paper was obviously larger than that between two ink layers. Penetration between two ink layers was stable, almost not affected by paper. The bigger the roughness and bulk of paper were, the smaller the glossiness of ink layer was. There appeared directional ink strips on ink layer on three kinds of paper, beginning from the 3rd ink layer, there also appeared ink pits on ink layer on paper whose roughness and bulk were the biggest, which showed printer precision was also an important factor for the glossiness, apart from paper. Thus, the tight and smooth paper should be selected in UV ink-jet 3D printing. Before printing, pretreatment should be done to exclude the influence of the 1st ink layer and the ink strips.

Most paper-based 3D color printers are plagued by the problem of slow printing speed, which is caused by the double-sided coloration for A4 office paper during the printing process. In order to resolve this issue, we propose a new fast and reliable coloration algorithm using geometric information in STL file, given the existing slicing methods. During the entire process, the colored surface is determined by D value that represents the positive or negative slope of layer in the 3D model after slicing. Colored inks with corresponding permeability are used to print single-sided or double-sided to accelerate the printing speed. For the given 3D models, the efficiency of the speedup is discussed and qualitatively analyzed. The results show that the proposed algorithm can increase the printing speed of paper-based 3D color printers, based on the existing materials and apparatus, at a lower cost than the common approaches.

For the modern pulp and paper industry with high technical requirement, huge energy consumption and large pollution output, the computer integrated process system (CIPS) of the flow industry which could effectively integrate corporate management concept, information technology and automatic control technology is necessary. Based on the analysis of the characteristics of various workshop sections of the pulp and paper industry, we put forward the CIPS three-layer system structure (ERP, MES and PCS) which could be applied in the pulp and paper industry, and a new CIPS optimized application project based on SIMATIC PCS7 software platform for the papermaking corporation is realized.

The difference of printing quality depends on the transfer of ink and paper performance.In this paper based on the theory of printing.Measuring the performance of all sorts of paper,with IGT-C1 type printability tester to simulate the printing principle.In the same printing pressure,printing speed and ink,under the conditions of constant temperature and humidity.Using different paper type experiment,obtained paper all kinds of performance and ink transfer data.Then processing, analysis,and obtained paper performance and ink transfer rate relation curves of in printing pressure and the printing speed with constant.For the printing quality control to provide certain basis in the different performance of paper.

The paper analyses the structural peculiarity and design methods of the adjustable heat pump, bring forward a new project which used adjustable heat pump system for paper machine dryers. The system can enhance the steam’s function, accelerate the speed and economize the energy.

Rapid economy development and upsurge of paper consumption cause the shortage of paper material. Waste paper recycling can solve this problem effectively. This paper analyses the status of waste paper recycling in China and abroad，also the technology development trend. According to the situation of our country, suggestions for strengthening recycling of waste paper are proposed.

This paper has a brief introduction to a algorithm that can automatically identify the defective cutting region when automatic paper cutter does quality analysis. The algorithm analyzed the characteristics of processed shear mark image,detected defects,found a critical point of defective part ,then a unique regional recognition algorithm was developed based on the basis of the general processing algorithm. The algorithms can pinpoint the region that cutting defects exist according to the coordinates of critical point accurately, improve the efficiency of quality analysis, and also has stated that image processing is available in the regional recognition of automatic paper cutter.

Peer review is a new phenomenon in the process of internationalization of academic journals, but also a worldwide problem. In this paper, the development and practical application of peer review system are sort out, which are based on objective data research of domestic and international academic journals; the problems of network online published papers in practice are analyzed and explored by modern advanced network technology as the application tool, and how scientific orientation are they to play an effective role. The purpose of paper is in order to ensure the impartiality of the academic council, spread rapidly and use information resources, and further promote to enhance the overall level of academic journals.

The paper currency image recognition method based on Gabor filter set is discussed in this paper. According to the paper currency image features, the suitable parameters of Gabor filter set are selected for the extraction of paper currency characteristics, the multi-scale and multi-directional texture characteristics of paper currency image are gotten; then the texture images are meshed, and the row and column projection sum of grid pixels' average grey are calculated, finally, the template match method based on grid projection characteristics is used for paper currency recognition. Experiments show that, this method has strong anti-interference ability, it can raise the recognition rate of old or dirty paper currency greatly, and it costs little time.

According to the features of paper currency CIS image, the fuzzy set theory is initial used to improve the contrast of banknote target and background, paper money’s edge pixels are obtained by scanning, and then the sub-pixel edges are fitted by least square method; in the fitting process, the error threshold method is applied for eliminating noisy edge points, then slope correction of paper money is carried out according to the angle of sub-pixel edge line and the note area is extracted, finally, fuzzy enhancement is used for the extracted image again. Experiments show that, this method has good versatility, high accuracy and strong anti-interference ability, it can even extract the paper currency area effectively in the edge deterioration and unfilled corner condition, and the enhanced image is in favor of subsequent paper currency recognition.

This paper focuses on scraps of paper splicing recovery issues. To deal with complex scraps restoration problem, first the image should be changed as pixel grey level binary image, generating binary matrix, and then classify the scraps using SOM neural network data and feature comparison method. Combining with the Euclidean distance discriminant method, we match the scraps of paper with same edges and obtain a complete stitching schematic finally.