Search

Renewable generation of fuels using solar energy is a promising technology whose deployment hinges on the discovery of materials with a combination of durability and solar-to-chemical conversion efficiency that has yet to be demonstrated. Stable operation of photoanodes has been demonstrated with wide-gap semiconductors, as well as protected visible gap semiconductors. Visible photoresponse from electrochemically stable materials is quite rare. In this paper, we report the high-throughput discovery of an amorphous Ni-Sb (1:1) oxide photoanode that meets the requirements of operational stability, visible photoresponse, and appreciable photovoltage. X-ray absorption characterization of Ni and Sb establishes a structural connection to rutile NiSb2O6, guiding electronic structure characterization via X-ray photoelectron experiments and density functional theory. This amorphous photoanode opens avenues for photoelectrode development due to the lack of crystal anisotropy combined with its operational stability, which mitigates the formation of an interphase that disrupts the semiconductor-electrolyte junction.

Guided by computational Pourbaix screening and high-throughput experiments aimed at the development of precious-metal-free fuel cells, we investigate rutile CoSb2O6 as an electrocatalyst for oxygen reduction in 1 M sulfuric acid. Following 4 h of catalyst conditioning at 0.7 V vs RHE, operation at this potential for 20 h yielded an average current density of −0.17 mA cm-2 with corrosion at a rate of 0.04 nm hour-1 that is stoichiometric with catalyst composition. Surface Pourbaix analysis of the (111) surface identified partial H coverage under operating conditions. The Sb active site has an HO* binding free energy of 0.49 eV, which is near the peak of the kinetic 4e- ORR volcano for transition-metal oxides in acidic conditions. The experimental demonstration of operational stability and computational identification of a reaction pathway with favorable energetics place rutile CoSb2O6 among the most promising precious-metal-free electrocatalysts for oxygen reduction in acidic media.

Hard X-ray spectroscopy is an element specific probe of electronic state, but signals are weak and require intense light to study low concentration samples. Free electron laser facilities offer the highest intensity X-rays of any available light source. The light produced at such facilities is stochastic, with spikey, broadband spectra that change drastically from shot to shot. Here, using aqueous ferrocyanide, we show that the resonant X-ray emission (RXES) spectrum can be inferred by correlating for each shot the fluorescence intensity from the sample with spectra of the fluctuating, self-amplified spontaneous emission (SASE) source. We obtain resolved narrow and chemically rich information in core-to-valence transitions of the pre-edge region at the Fe K-edge. Our approach avoids monochromatization, provides higher photon flux to the sample, and allows non-resonant signals like elastic scattering to be simultaneously recorded. The spectra obtained match well with spectra measured using a monochromator. We also show that inaccurate measurements of the stochastic light spectra reduce the measurement efficiency of our approach.

X-ray absorption spectroscopy (XAS) produces a wealth of information about the local structure of materials, but interpretation of spectra often relies on easily accessible trends and prior assumptions about the structure. Recently, researchers have demonstrated that machine learning models can automate this process to predict the coordinating environments of absorbing atoms from their XAS spectra. However, machine learning models are often difficult to interpret, making it challenging to determine when they are valid and whether they are consistent with physical theories. In this work, we present three main advances to the data-driven analysis of XAS spectra: we demonstrate the efficacy of random forests in solving two new property determination tasks (predicting Bader charge and mean nearest neighbor distance), we address how choices in data representation affect model interpretability and accuracy, and we show that multiscale featurization can elucidate the regions and trends in spectra that encode various local properties. The multiscale featurization transforms the spectrum into a vector of polynomial-fit features, and is contrasted with the commonly-used “pointwise” featurization that directly uses the entire spectrum as input. We find that across thousands of transition metal oxide spectra, the relative importance of features describing the curvature of the spectrum can be localized to individual energy ranges, and we can separate the importance of constant, linear, quadratic, and cubic trends, as well as the white line energy. This work has the potential to assist rigorous theoretical interpretations, expedite experimental data collection, and automate analysis of XAS spectra, thus accelerating the discovery of new functional materials.

X-ray absorption spectroscopy (XAS) produces a wealth of information about the local structure of materials, but interpretation of spectra often relies on easily accessible trends and prior assumptions about the structure. Recently, researchers have demonstrated that machine learning models can automate this process to predict the coordinating environments of absorbing atoms from their XAS spectra. However, machine learning models are often difficult to interpret, making it challenging to determine when they are valid and whether they are consistent with physical theories. In this work, we present three main advances to the data-driven analysis of XAS spectra: we demonstrate the efficacy of random forests in solving two new property determination tasks (predicting Bader charge and mean nearest neighbor distance), we address how choices in data representation affect model interpretability and accuracy, and we show that multiscale featurization can elucidate the regions and trends in spectra that encode various local properties. The multiscale featurization transforms the spectrum into a vector of polynomial-fit features, and is contrasted with the commonly-used “pointwise” featurization that directly uses the entire spectrum as input. We find that across thousands of transition metal oxide spectra, the relative importance of features describing the curvature of the spectrum can be localized to individual energy ranges, and we can separate the importance of constant, linear, quadratic, and cubic trends, as well as the white line energy. This work has the potential to assist rigorous theoretical interpretations, expedite experimental data collection, and automate analysis of XAS spectra, thus accelerating the discovery of new functional materials.

Photosystem II (PSII) catalyzes the light driven oxidation of water into dioxygen, protons and electrons. This reaction takes place at the oxygen evolving complex (OEC) a Mn4CaO5 cluster, through five intermediate S-states (S0 to S4), S1 being the dark-stable state and S3 the highest oxidized semi-stable state before O-O bond formation and O2 evolution. We have been using fs X-ray pulses from an X-ray free electron laser (XFEL) to study the geometric and electronic structure of the OEC over the reaction cycle and recently reported high-resolution (around 2 Å) structures of PSII at room temperature for the four stable states in the S-state cycle as well as for two time points in the S2-S3 transition. Our results reveal important structural changes including the binding of one additional ‘water’, Ox, during the S2→S3 state transition. The binding of the additional oxygen Ox in the S3 state between Ca and Mn1 suggests O-O bond formation mechanisms involving O5 as one substrate, where Ox is either the other substrate oxygen or is perfectly positioned to refill the O5 position during O2 release. We also explored the extended network of H-bonds between amino acid residues and waters connecting the OEC to the bulk solvent. We observed several significant changes in this network during the S-state cycle. Based on these data we will discuss the dynamics of the catalytic site and its environment over the reaction cycle.

X-ray-based techniques are extremely versatile and can provide information regarding the atomic arrangement of atoms in a molecule and are often the method of choice for exploring the structures of proteins and their ligands. The photosynthetic splitting of water and evolution of molecular oxygen by plants and cyanobacteria is one of the key reactions in nature, which is catalysed by a metal site in a membrane-bound photosynthetic protein complex. In this article, we will describe how X-ray pulse lasers can simultaneously probe the overall atomic structure of the photosynthetic system and the electronic structure of a catalytic metal site under physiological conditions in real time.

X-ray-based techniques are extremely versatile and can provide information regarding the atomic arrangement of atoms in a molecule and are often the method of choice for exploring the structures of proteins and their ligands. The photosynthetic splitting of water and evolution of molecular oxygen by plants and cyanobacteria is one of the key reactions in nature, which is catalysed by a metal site in a membrane-bound photosynthetic protein complex. In this article, we will describe how X-ray pulse lasers can simultaneously probe the overall atomic structure of the photosynthetic system and the electronic structure of a catalytic metal site under physiological conditions in real time.

In natural photosynthesis, the water oxidation reaction takes place in the oxygen evolving complex (OEC) in Photosystem II (PSII), that cycles through a series of five intermediate S-states. Mechanistic studies of this catalytic reaction have been carried out with various spectroscopic methods, structural analysis, and theoretical studies. Among them, the structural information of the metal cluster has been obtained largely from the X-ray techniques that include X-ray crystallography and X-ray spectroscopy. This chapter describes the recent studies of the OEC in PSII with X-ray spectroscopy and crystallography.

In natural photosynthesis, the water oxidation reaction takes place in the oxygen evolving complex (OEC) in Photosystem II (PSII), that cycles through a series of five intermediate S-states. Mechanistic studies of this catalytic reaction have been carried out with various spectroscopic methods, structural analysis, and theoretical studies. Among them, the structural information of the metal cluster has been obtained largely from the X-ray techniques that include X-ray crystallography and X-ray spectroscopy. This chapter describes the recent studies of the OEC in PSII with X-ray spectroscopy and crystallography.

Achieving a molecular-level understanding of interfacial (photo)electrochemical processes is essential in order to tailor novel and highly-performing catalytic systems. The corresponding recent development of in situ and operando tools has posed new challenges on experimental architectures. In this study, we use ambient pressure X-ray photoelectron spectroscopy (AP-XPS) to probe the solid/liquid electrified interface of a polycrystalline Pt sample in contact with an alkaline electrolyte during hydrogen and oxygen evolution reactions. Using the “dip-and-pull” technique to probe the interface through a thin liquid layer generated on the sample surface, we observe that the electrolyte meniscus becomes unstable under sustained driving of an electrolyte-consuming reaction (such as water oxidation). The addition of an electrochemically inert supporting electrolyte mitigates this issue, maintaining a stable meniscus layer for prolonged reaction times. In contrast, for processes in which the electrolyte is replenished in the reaction pathway (i.e. water reduction in alkaline conditions), we find that the solid/liquid interface remains stable without addition of a secondary supporting electrolyte. The approach described in this work allows the extension of operando AP-XPS capabilities using the “dip-and-pull” method to a broader class of reactions consuming ionic species during complex interfacial faradaic processes.

Electrocatalysis of the oxygen evolution reaction is central to several energy technologies including electrolyzers, solar fuel generators, and air-breathing batteries. Strong acid electrolytes are desirable for many implementations of these technologies, although the deployment of such device designs is often hampered by the lack of non-precious-metal oxygen evolution electrocatalysts, with Ir-based oxides comprising the only known catalysts that exhibit stable activity at low overpotential. During our exploration of the Mn-Sb-O system for precious-metal-free electrocatalysts, we discovered that Mn can be incorporated into the rutile oxide structure at much higher concentrations than previously known, and that these Mn-rich rutile alloys exhibit great catalytic activity with current densities exceeding 50 mA cm-2 at 0.58 V overpotential and catalysis onset at 0.3 V overpotential. While this activity does not surpass that of IrO2, Pourbaix analysis reveals that the Mn-Sb rutile oxide alloys have the same or better thermodynamic stability under operational conditions. By combining combinatorial composition, structure, and activity mapping with synchrotron X-ray absorption measurements and first-principles materials chemistry calculations, we provide a comprehensive understanding of these oxide alloys and identify the critical role of Sb in stabilizing the trivalent Mn octahedra that have been shown to be effective oxygen evolution reaction (OER) catalysts.

Electrocatalysis of the oxygen evolution reaction is central to several energy technologies including electrolyzers, solar fuel generators, and air-breathing batteries. Strong acid electrolytes are desirable for many implementations of these technologies, although the deployment of such device designs is often hampered by the lack of non-precious-metal oxygen evolution electrocatalysts, with Ir-based oxides comprising the only known catalysts that exhibit stable activity at low overpotential. During our exploration of the Mn-Sb-O system for precious-metal-free electrocatalysts, we discovered that Mn can be incorporated into the rutile oxide structure at much higher concentrations than previously known, and that these Mn-rich rutile alloys exhibit great catalytic activity with current densities exceeding 50 mA cm-2 at 0.58 V overpotential and catalysis onset at 0.3 V overpotential. While this activity does not surpass that of IrO2, Pourbaix analysis reveals that the Mn-Sb rutile oxide alloys have the same or better thermodynamic stability under operational conditions. By combining combinatorial composition, structure, and activity mapping with synchrotron X-ray absorption measurements and first-principles materials chemistry calculations, we provide a comprehensive understanding of these oxide alloys and identify the critical role of Sb in stabilizing the trivalent Mn octahedra that have been shown to be effective oxygen evolution reaction (OER) catalysts.

Achieving a molecular-level understanding of interfacial (photo)electrochemical processes is essential in order to tailor novel and highly-performing catalytic systems. The corresponding recent development of in situ and operando tools has posed new challenges on experimental architectures. In this study, we use ambient pressure X-ray photoelectron spectroscopy (AP-XPS) to probe the solid/liquid electrified interface of a polycrystalline Pt sample in contact with an alkaline electrolyte during hydrogen and oxygen evolution reactions. Using the “dip-and-pull” technique to probe the interface through a thin liquid layer generated on the sample surface, we observe that the electrolyte meniscus becomes unstable under sustained driving of an electrolyte-consuming reaction (such as water oxidation). The addition of an electrochemically inert supporting electrolyte mitigates this issue, maintaining a stable meniscus layer for prolonged reaction times. In contrast, for processes in which the electrolyte is replenished in the reaction pathway (i.e. water reduction in alkaline conditions), we find that the solid/liquid interface remains stable without addition of a secondary supporting electrolyte. The approach described in this work allows the extension of operando AP-XPS capabilities using the “dip-and-pull” method to a broader class of reactions consuming ionic species during complex interfacial faradaic processes.

Oxygen, that supports all aerobic life, is abundant in the atmosphere because of its constant regeneration by photosynthetic water oxidation, which is catalyzed by a Mn4CaO5 cluster in photosystem II (PS II), a multi subunit membrane protein complex. X-ray and other spectroscopy studies of the electronic and geometric structure of the Mn4CaO5 cluster as it advances through the intermediate states have been important for understanding the mechanism of water oxidation. The results and interpretations, especially from X-ray spectroscopy studies, regarding the geometric and electronic structure and the changes as the system proceeds through the catalytic cycle will be summarized in this review. This review will also include newer methodologies in time-resolved X-ray diffraction and spectroscopy that have become available since the commissioning of the X-ray free electron laser (XFEL) and are being applied to study the oxygen-evolving complex (OEC). The femtosecond X-ray pulses of the XFEL allows us to outrun X-ray damage at room temperature, and the time-evolution of the photo-induced reaction can be probed using a visible laser-pump followed by the X-ray-probe pulse. XFELs can be used to simultaneously determine the light-induced protein dynamics using crystallography and the local chemistry that occurs at the catalytic center using X-ray spectroscopy under functional conditions. Membrane inlet mass spectrometry has been important for providing direct information about the exchange of substrate water molecules, which has a direct bearing on the mechanism of water oxidation. Moreover, it has been indispensable for the time-resolved X-ray diffraction and spectroscopy studies and will be briefly reviewed in this chapter. Given the role of PS II in maintaining life in the biosphere and the future vision of a renewable energy economy, understanding the structure and mechanism of the photosynthetic water oxidation catalyst is an important goal for the future.

Oxygen, that supports all aerobic life, is abundant in the atmosphere because of its constant regeneration by photosynthetic water oxidation, which is catalyzed by a Mn4CaO5 cluster in photosystem II (PS II), a multi subunit membrane protein complex. X-ray and other spectroscopy studies of the electronic and geometric structure of the Mn4CaO5 cluster as it advances through the intermediate states have been important for understanding the mechanism of water oxidation. The results and interpretations, especially from X-ray spectroscopy studies, regarding the geometric and electronic structure and the changes as the system proceeds through the catalytic cycle will be summarized in this review. This review will also include newer methodologies in time-resolved X-ray diffraction and spectroscopy that have become available since the commissioning of the X-ray free electron laser (XFEL) and are being applied to study the oxygen-evolving complex (OEC). The femtosecond X-ray pulses of the XFEL allows us to outrun X-ray damage at room temperature, and the time-evolution of the photo-induced reaction can be probed using a visible laser-pump followed by the X-ray-probe pulse. XFELs can be used to simultaneously determine the light-induced protein dynamics using crystallography and the local chemistry that occurs at the catalytic center using X-ray spectroscopy under functional conditions. Membrane inlet mass spectrometry has been important for providing direct information about the exchange of substrate water molecules, which has a direct bearing on the mechanism of water oxidation. Moreover, it has been indispensable for the time-resolved X-ray diffraction and spectroscopy studies and will be briefly reviewed in this chapter. Given the role of PS II in maintaining life in the biosphere and the future vision of a renewable energy economy, understanding the structure and mechanism of the photosynthetic water oxidation catalyst is an important goal for the future.

Understanding the interplay between surface chemistry, electronic structure, and reaction mechanism of the catalyst at the electrified solid/liquid interface will enable the design of more efficient materials systems for sustainable energy production. The substantial progress in operando characterization, particularly using synchrotron based X-ray spectroscopies, provides the unprecedented opportunity to uncover surface chemical and structural transformations under various (electro)chemical reaction environments. In this work, we study a polycrystalline platinum surface under oxygen evolution conditions in an alkaline electrolyte by means of ambient pressure X-ray photoelectron spectroscopy performed at the electrified solid/liquid interface. We elucidate previously inaccessible aspects of the surface chemistry and structure as a function of the applied potential, allowing us to propose a reaction mechanism for oxygen evolution on a platinum electrode in alkaline solutions.

We combine high-energy resolution fluorescence detection (HERFD) X-ray absorption spectroscopy (XAS) measurements with first-principles density functional theory (DFT) calculations to provide a molecular-scale understanding of local structure, and its role in defining optoelectronic properties, in CH3NH3Pb(I1-xBrx)3 perovskites. The spectra probe a ligand field splitting in the unoccupied d states of the material, which lie well above the conduction band minimum and display high sensitivity to halide identity, Pb-halide bond length, and Pb-halide octahedral tilting, especially for apical halide sites. The spectra are also sensitive to the organic cation. We find that the halides in these mixed compositions are randomly distributed, rather than having preferred octahedral sites, and that thermal tilting motions dominate over any preferred structural distortions as a function of halide composition. These findings demonstrate the utility of the combined HERFD XAS and DFT approach for determining structural details in these materials and connecting them to optoelectronic properties observed by other characterization methods.

Establishing catalytic structure-function relationships introduces the ability to optimize the catalyst structure for enhanced activity, selectivity, and durability against reaction conditions and prolonged catalysis. Here we present experimental and computational data elucidating the mechanism for the O2 reduction reaction with a conductive nickel-based metal-organic framework (MOF). Elucidation of the O2 reduction electrokinetics, understanding the role of the extended MOF structure in providing catalytic activity, observation of how the redox activity and pKa of the organic ligand influences catalysis, and identification of the catalyst active site yield a detailed O2 reduction mechanism where the ligand, rather than the metal, plays a central role. More generally, familiarization with how the structural and electronic properties of the MOF influence reactivity may provide deeper insight into the mechanisms by which less structurally defined nonplatinum group metal electrocatalysts reduce O2.

The oxygen evolution reaction (OER) is a critical component of industrial processes such as electrowinning of metals and the chlor-alkali process. It also plays a central role in the development of a renewable energy field for generation a solar fuels by providing both the protons and electrons needed to generate fuels such as H2 or reduced hydrocarbons from CO2. To improve these processes, it is necessary to expand the fundamental understanding of catalytically active species at low overpotential, which will further the development of electrocatalysts with high activity and durability. In this context, performing experimental investigations of the electrocatalysts under realistic working regimes (i.e., under operando conditions) is of crucial importance. Here, we study a highly active quinary transition-metal-oxide-based OER electrocatalyst by means of operando ambient-pressure X-ray photoelectron spectroscopy and X-ray absorption spectroscopy performed at the solid/liquid interface. We observe that the catalyst undergoes a clear chemical-structural evolution as a function of the applied potential with Ni, Fe, and Co oxyhydroxides comprising the active catalytic species. While CeO2 is redox inactive under catalytic conditions, its influence on the redox processes of the transition metals boosts the catalytic activity at low overpotentials, introducing an important design principle for the optimization of electrocatalysts and tailoring of high-performance materials. (Chemical Equation Presented).

Understanding the interplay between surface chemistry, electronic structure, and reaction mechanism of the catalyst at the electrified solid/liquid interface will enable the design of more efficient materials systems for sustainable energy production. The substantial progress in operando characterization, particularly using synchrotron based X-ray spectroscopies, provides the unprecedented opportunity to uncover surface chemical and structural transformations under various (electro)chemical reaction environments. In this work, we study a polycrystalline platinum surface under oxygen evolution conditions in an alkaline electrolyte by means of ambient pressure X-ray photoelectron spectroscopy performed at the electrified solid/liquid interface. We elucidate previously inaccessible aspects of the surface chemistry and structure as a function of the applied potential, allowing us to propose a reaction mechanism for oxygen evolution on a platinum electrode in alkaline solutions.

We combine high-energy resolution fluorescence detection (HERFD) X-ray absorption spectroscopy (XAS) measurements with first-principles density functional theory (DFT) calculations to provide a molecular-scale understanding of local structure, and its role in defining optoelectronic properties, in CH3NH3Pb(I1-xBrx)3 perovskites. The spectra probe a ligand field splitting in the unoccupied d states of the material, which lie well above the conduction band minimum and display high sensitivity to halide identity, Pb-halide bond length, and Pb-halide octahedral tilting, especially for apical halide sites. The spectra are also sensitive to the organic cation. We find that the halides in these mixed compositions are randomly distributed, rather than having preferred octahedral sites, and that thermal tilting motions dominate over any preferred structural distortions as a function of halide composition. These findings demonstrate the utility of the combined HERFD XAS and DFT approach for determining structural details in these materials and connecting them to optoelectronic properties observed by other characterization methods.

The oxygen evolution reaction (OER) is a critical component of industrial processes such as electrowinning of metals and the chlor-alkali process. It also plays a central role in the development of a renewable energy field for generation a solar fuels by providing both the protons and electrons needed to generate fuels such as H2 or reduced hydrocarbons from CO2. To improve these processes, it is necessary to expand the fundamental understanding of catalytically active species at low overpotential, which will further the development of electrocatalysts with high activity and durability. In this context, performing experimental investigations of the electrocatalysts under realistic working regimes (i.e., under operando conditions) is of crucial importance. Here, we study a highly active quinary transition-metal-oxide-based OER electrocatalyst by means of operando ambient-pressure X-ray photoelectron spectroscopy and X-ray absorption spectroscopy performed at the solid/liquid interface. We observe that the catalyst undergoes a clear chemical-structural evolution as a function of the applied potential with Ni, Fe, and Co oxyhydroxides comprising the active catalytic species. While CeO2 is redox inactive under catalytic conditions, its influence on the redox processes of the transition metals boosts the catalytic activity at low overpotentials, introducing an important design principle for the optimization of electrocatalysts and tailoring of high-performance materials. (Chemical Equation Presented).

Establishing catalytic structure-function relationships introduces the ability to optimize the catalyst structure for enhanced activity, selectivity, and durability against reaction conditions and prolonged catalysis. Here we present experimental and computational data elucidating the mechanism for the O2 reduction reaction with a conductive nickel-based metal-organic framework (MOF). Elucidation of the O2 reduction electrokinetics, understanding the role of the extended MOF structure in providing catalytic activity, observation of how the redox activity and pKa of the organic ligand influences catalysis, and identification of the catalyst active site yield a detailed O2 reduction mechanism where the ligand, rather than the metal, plays a central role. More generally, familiarization with how the structural and electronic properties of the MOF influence reactivity may provide deeper insight into the mechanisms by which less structurally defined nonplatinum group metal electrocatalysts reduce O2.

The ultra-bright femtosecond X-ray pulses provided by X-ray Free Electron Lasers (XFELs) open capabilities for studying the structure and dynamics of a wide variety of biological and inorganic systems beyond what is possible at synchrotron sources. Although the structure and chemistry at the catalytic sites have been studied intensively in both biological and inorganic systems, a full understanding of the atomic-scale chemistry requires new approaches beyond the steady state X-ray crystallography and X-ray spectroscopy at cryogenic temperatures. Following the dynamic changes in the geometric and electronic structure at ambient conditions, while overcoming X-ray damage to the redox active catalytic center, is key for deriving reaction mechanisms. Such studies become possible by using the intense and ultra-short femtosecond X-ray pulses from an XFEL, where sample is probed before it is damaged. We have developed methodology for simultaneously collecting X-ray diffraction data and X-ray emission spectra, using an energy dispersive spectrometer, at ambient conditions, and used this approach to study the room temperature structure and intermediate states of the photosynthetic water oxidizing metallo-protein, photosystem II. Moreover, we have also used this setup to simultaneously collect the X-ray emission spectra from multiple metals to follow the ultrafast dynamics of light-induced charge transfer between multiple metal sites. A Mn-Ti containing system was studied at an XFEL to demonstrate the efficacy and potential of this method.

The ultra-bright femtosecond X-ray pulses provided by X-ray Free Electron Lasers (XFELs) open capabilities for studying the structure and dynamics of a wide variety of biological and inorganic systems beyond what is possible at synchrotron sources. Although the structure and chemistry at the catalytic sites have been studied intensively in both biological and inorganic systems, a full understanding of the atomic-scale chemistry requires new approaches beyond the steady state X-ray crystallography and X-ray spectroscopy at cryogenic temperatures. Following the dynamic changes in the geometric and electronic structure at ambient conditions, while overcoming X-ray damage to the redox active catalytic center, is key for deriving reaction mechanisms. Such studies become possible by using the intense and ultra-short femtosecond X-ray pulses from an XFEL, where sample is probed before it is damaged. We have developed methodology for simultaneously collecting X-ray diffraction data and X-ray emission spectra, using an energy dispersive spectrometer, at ambient conditions, and used this approach to study the room temperature structure and intermediate states of the photosynthetic water oxidizing metallo-protein, photosystem II. Moreover, we have also used this setup to simultaneously collect the X-ray emission spectra from multiple metals to follow the ultrafast dynamics of light-induced charge transfer between multiple metal sites. A Mn-Ti containing system was studied at an XFEL to demonstrate the efficacy and potential of this method.

The ultra-bright femtosecond X-ray pulses provided by X-ray Free Electron Lasers (XFELs) open capabilities for studying the structure and dynamics of a wide variety of biological and inorganic systems beyond what is possible at synchrotron sources. Although the structure and chemistry at the catalytic sites have been studied intensively in both biological and inorganic systems, a full understanding of the atomic-scale chemistry requires new approaches beyond the steady state X-ray crystallography and X-ray spectroscopy at cryogenic temperatures. Following the dynamic changes in the geometric and electronic structure at ambient conditions, while overcoming X-ray damage to the redox active catalytic center, is key for deriving reaction mechanisms. Such studies become possible by using the intense and ultra-short femtosecond X-ray pulses from an XFEL, where sample is probed before it is damaged. We have developed methodology for simultaneously collecting X-ray diffraction data and X-ray emission spectra, using an energy dispersive spectrometer, at ambient conditions, and used this approach to study the room temperature structure and intermediate states of the photosynthetic water oxidizing metallo-protein, photosystem II. Moreover, we have also used this setup to simultaneously collect the X-ray emission spectra from multiple metals to follow the ultrafast dynamics of light-induced charge transfer between multiple metal sites. A Mn-Ti containing system was studied at an XFEL to demonstrate the efficacy and potential of this method.

The co-existence of "axial" and "rhombic" coordination environments has been demonstrated in a "Type 1" copper site of Pseudoazurin. This observation opens up previously not considered interpretations for the relationship between geometry and electronic structure of the four coordinate copper site. The Met16 variants of pseudoazurin were considered as model systems for investigating the effect of weak interactions from the second coordination sphere. The correlation between geometric and electronic structures of "Type 1" copper site was evaluated by the multi-edge (Cu K-edge and S K-edge) X-ray absorption spectroscopy (XAS) of Met16 variants of pseudoazurin. The co-existing axial and rhombic sites in pseudoazurin were characterized by Culigand distances, effective nuclear charge, and Cu-S( Cys) covalency from XAS. The XAS results were correlated with DFT calculations for investigating the effect of protein environment from the inner-sphere and beyond around the Cu site. The combined experimental and theoretical results support the presence of a close correlation between outer sphere environment and inner sphere coordination environment. This is achieved in pseudoazurin by a previously undisclosed allosteric effect that involves a rearrangement of the protein tertiary structure.

The development of low-cost catalysts with oxygen reduction reaction (ORR) activity superior to that of Pt for fuel cells is highly desirable but remains challenging. Herein, we report a bimetal-organic framework (bi-MOF) self-adjusted synthesis of support-free porous Co-N-C nanopolyhedron electrocatalysts by pyrolysis of a Zn/Co bi-MOF without any post-treatments. The presence of initial Zn forms a spatial isolation of Co that suppresses its sintering during pyrolysis, and Zn evaporation also promotes the surface area of the resultant catalysts. The composition, morphology, and hence ORR activity of Co-N-C could be tuned by the Zn/Co ratio. The optimal Co-N-C exhibited remarkable ORR activity with a half-wave potential of 0.871 V versus the reversible hydrogen electrode (RHE) (30 mV more positive than that of commercial 20 wt % Pt/C) and a kinetic current density of 39.3 mA cm-2 at 0.80 V versus RHE (3.1 times that of Pt/C) in 0.1 M KOH, and excellent stability and methanol tolerance. It also demonstrated ORR activity comparable to and stability much higher than those of Pt/C in acidic and neutral electrolytes. Various characterization techniques, including X-ray absorption spectroscopy, revealed that the superior activity and strong stability of Co-N-C originated from the intense interaction between Co and N, the high content of ORR active pyridinic and pyrrolic N, and the large specific surface area.

The design of active, robust, and nonprecious electrocatalysts with both H2 and O2 evolution reaction (HER and OER) activities for overall water splitting is highly desirable but remains a grand challenge. Herein, we report a facile two-step method to synthesize porous Co-P/NC nanopolyhedrons composed of CoPx (a mixture of CoP and Co2P) nanoparticles embedded in N-doped carbon matrices as electrocatalysts for overall water splitting. The Co-P/NC catalysts were prepared by direct carbonization of Co-based zeolitic imidazolate framework (ZIF-67) followed by phosphidation. Benefiting from the large specific surface area, controllable pore texture, and high nitrogen content of ZIF (a subclass of metal-organic frameworks), the optimal Co-P/NC showed high specific surface area of 183 m2 g-1 and large mesopores, and exhibited remarkable catalytic performance for both HER and OER in 1.0 M KOH, affording a current density of 10 mA cm-2 at low overpotentials of -154 mV for HER and 319 mV for OER, respectively. Furthermore, a Co-P/NC-based alkaline electrolyzer approached 165 mA cm-2 at 2.0 V, superior to that of Pt/IrO2 couple, along with strong stability. Various characterization techniques including X-ray absorption spectroscopy (XAS) revealed that the superior activity and strong stability of Co-P/NC originated from its 3D interconnected mesoporosity with high specific surface area, high conductivity, and synergistic effect of CoPx encapsulated within N-doped carbon matrices.

Ce-rich mixed metal oxides comprise a recently discovered class of electrocatalysts for the oxygen evolution reaction (OER). In particular, at current densities below 10 mA cm-2, Ni0.3Fe0.07Co0.2Ce0.43Ox exhibits superior activity compared to the corresponding transition metal oxides, despite the relative inactivity of ceria. To elucidate the enhanced activity and underlying catalytic mechanism, detailed structural characterization of this quinary oxide electrocatalyst is reported. Transmission electron microscopy imaging of cross-section films as-prepared and after electrochemical testing reveals a stable two-phase nanostructure composed of 3-5 nm diameter crystallites of fluorite CeO2 intimately mixed with 3-5 nm crystallites of transition metal oxides alloyed in the rock salt NiO structure. Dosing experiments demonstrate that an electron flux greater than ≈1000 e Å-2 s-1 causes the inherently crystalline material to become amorphous. A very low dose rate of 130 e Å-2 s-1 is employed for atomic resolution imaging using inline holography techniques to reveal a nanostructure in which the transition metal oxide nanocrystals form atomically sharp boundaries with the ceria nanocrystals, and these results are corroborated with extensive synchrotron X-ray absorption spectroscopy measurements. Ceria is a well-studied cocatalyst for other heterogeneous and electrochemical reactions, and our discovery introduces biphasic cocatalysis as a design concept for improved OER electrocatalysts. The unique electrochemical behavior of the Ni0.3Fe0.07Co0.2Ce0.43Oxoxygen evolution electrocatalyst motivates detailed structural characterization to elucidate the underlying catalytic mechanism. Atomic resolution transmission electron microscopy imaging using inline holography techniques reveals a nanostructure in which transition metal oxide alloys form atomically sharp boundaries with ceria nanocrystals. Synchrotron X-ray absorption spectroscopy measurements confirm this unprecedented obs

Monoclinic scheelite bismuth vanadate (m-BiVO4) is a promising semiconductor photoanode for photoelectrochemical (PEC) water splitting. Despite considerable recent progress in achieving improved photocurrents and photovoltages, there remain open questions about the basic optoelectronic properties of this material. Indeed, there is disagreement about the nature of its fundamental bandgap, with theoretical predictions and some experimental observations pointing to an indirect bandgap and other experimental studies to a direct bandgap. Knowledge of this property is critical for understanding light absorption and photocarrier properties, as well as for establishing rational approaches to improved efficiency. Here, experimental spectroscopic techniques are used to resolve this issue and provide a fundamental portrait of the optical properties of the material. Resonant inelastic X-ray scattering proves conclusively that m-BiVO4 is an indirect bandgap semiconductor. These measurements are supported by UV-vis absorption spectroscopy and spectroscopic ellipsometry, which confirm this finding and also indicate the presence of a direct transition located at 200 meV above the indirect one. The spectral dependence of the optical constants is determined by development of a photophysical model for the ellipsometric data. Photogenerated carrier dynamics are probed by transient absorption spectroscopy, which reveals a relatively long lifetime compared to other commonly utilized metal oxide photoanodes and is attributed to the indirect nature of the fundamental gap. The combination of strong visible light absorption and relatively long excited state lifetime provides the basis for the high performance that has been achieved from BiVO4 photoanodes for water splitting.

The development of low-cost catalysts with oxygen reduction reaction (ORR) activity superior to that of Pt for fuel cells is highly desirable but remains challenging. Herein, we report a bimetal-organic framework (bi-MOF) self-adjusted synthesis of support-free porous Co-N-C nanopolyhedron electrocatalysts by pyrolysis of a Zn/Co bi-MOF without any post-treatments. The presence of initial Zn forms a spatial isolation of Co that suppresses its sintering during pyrolysis, and Zn evaporation also promotes the surface area of the resultant catalysts. The composition, morphology, and hence ORR activity of Co-N-C could be tuned by the Zn/Co ratio. The optimal Co-N-C exhibited remarkable ORR activity with a half-wave potential of 0.871 V versus the reversible hydrogen electrode (RHE) (30 mV more positive than that of commercial 20 wt % Pt/C) and a kinetic current density of 39.3 mA cm-2 at 0.80 V versus RHE (3.1 times that of Pt/C) in 0.1 M KOH, and excellent stability and methanol tolerance. It also demonstrated ORR activity comparable to and stability much higher than those of Pt/C in acidic and neutral electrolytes. Various characterization techniques, including X-ray absorption spectroscopy, revealed that the superior activity and strong stability of Co-N-C originated from the intense interaction between Co and N, the high content of ORR active pyridinic and pyrrolic N, and the large specific surface area.

Single-atom cobalt centers on various oxide surfaces (TiO2, MgO, SBA-15, AlPO, and Y-Zeolite) were prepared and evaluated as water oxidation catalysts by photochemical water oxidation experiments. Superior catalytic rates were observed for cobalt sites on basic supporting oxides (TiO2 and MgO) relative to those on acidic oxides (Y-Zeolite, AlPO, and SiO2). Per-atom turnover frequencies of ca. 0.04 s-1 were achieved, giving initial rates 100 times greater than that of a surface atom of a Co3O4 nanoparticle. Contrary to expectations based on theoretical work, no apparent correlation was observed between the catalytic rates and the oxygen atom affinities of the supporting oxides. (Graph Presented).

The development of low-cost catalysts with oxygen reduction reaction (ORR) activity superior to that of Pt for fuel cells is highly desirable but remains challenging. Herein, we report a bimetal-organic framework (bi-MOF) self-adjusted synthesis of support-free porous Co-N-C nanopolyhedron electrocatalysts by pyrolysis of a Zn/Co bi-MOF without any post-treatments. The presence of initial Zn forms a spatial isolation of Co that suppresses its sintering during pyrolysis, and Zn evaporation also promotes the surface area of the resultant catalysts. The composition, morphology, and hence ORR activity of Co-N-C could be tuned by the Zn/Co ratio. The optimal Co-N-C exhibited remarkable ORR activity with a half-wave potential of 0.871 V versus the reversible hydrogen electrode (RHE) (30 mV more positive than that of commercial 20 wt % Pt/C) and a kinetic current density of 39.3 mA cm-2 at 0.80 V versus RHE (3.1 times that of Pt/C) in 0.1 M KOH, and excellent stability and methanol tolerance. It also demonstrated ORR activity comparable to and stability much higher than those of Pt/C in acidic and neutral electrolytes. Various characterization techniques, including X-ray absorption spectroscopy, revealed that the superior activity and strong stability of Co-N-C originated from the intense interaction between Co and N, the high content of ORR active pyridinic and pyrrolic N, and the large specific surface area.

Single-atom cobalt centers on various oxide surfaces (TiO2, MgO, SBA-15, AlPO, and Y-Zeolite) were prepared and evaluated as water oxidation catalysts by photochemical water oxidation experiments. Superior catalytic rates were observed for cobalt sites on basic supporting oxides (TiO2 and MgO) relative to those on acidic oxides (Y-Zeolite, AlPO, and SiO2). Per-atom turnover frequencies of ca. 0.04 s-1 were achieved, giving initial rates 100 times greater than that of a surface atom of a Co3O4 nanoparticle. Contrary to expectations based on theoretical work, no apparent correlation was observed between the catalytic rates and the oxygen atom affinities of the supporting oxides. (Graph Presented).

The design of active, robust, and nonprecious electrocatalysts with both H2 and O2 evolution reaction (HER and OER) activities for overall water splitting is highly desirable but remains a grand challenge. Herein, we report a facile two-step method to synthesize porous Co-P/NC nanopolyhedrons composed of CoPx (a mixture of CoP and Co2P) nanoparticles embedded in N-doped carbon matrices as electrocatalysts for overall water splitting. The Co-P/NC catalysts were prepared by direct carbonization of Co-based zeolitic imidazolate framework (ZIF-67) followed by phosphidation. Benefiting from the large specific surface area, controllable pore texture, and high nitrogen content of ZIF (a subclass of metal-organic frameworks), the optimal Co-P/NC showed high specific surface area of 183 m2 g-1 and large mesopores, and exhibited remarkable catalytic performance for both HER and OER in 1.0 M KOH, affording a current density of 10 mA cm-2 at low overpotentials of -154 mV for HER and 319 mV for OER, respectively. Furthermore, a Co-P/NC-based alkaline electrolyzer approached 165 mA cm-2 at 2.0 V, superior to that of Pt/IrO2 couple, along with strong stability. Various characterization techniques including X-ray absorption spectroscopy (XAS) revealed that the superior activity and strong stability of Co-P/NC originated from its 3D interconnected mesoporosity with high specific surface area, high conductivity, and synergistic effect of CoPx encapsulated within N-doped carbon matrices.

Ce-rich mixed metal oxides comprise a recently discovered class of electrocatalysts for the oxygen evolution reaction (OER). In particular, at current densities below 10 mA cm-2, Ni0.3Fe0.07Co0.2Ce0.43Ox exhibits superior activity compared to the corresponding transition metal oxides, despite the relative inactivity of ceria. To elucidate the enhanced activity and underlying catalytic mechanism, detailed structural characterization of this quinary oxide electrocatalyst is reported. Transmission electron microscopy imaging of cross-section films as-prepared and after electrochemical testing reveals a stable two-phase nanostructure composed of 3-5 nm diameter crystallites of fluorite CeO2 intimately mixed with 3-5 nm crystallites of transition metal oxides alloyed in the rock salt NiO structure. Dosing experiments demonstrate that an electron flux greater than ≈1000 e Å-2 s-1 causes the inherently crystalline material to become amorphous. A very low dose rate of 130 e Å-2 s-1 is employed for atomic resolution imaging using inline holography techniques to reveal a nanostructure in which the transition metal oxide nanocrystals form atomically sharp boundaries with the ceria nanocrystals, and these results are corroborated with extensive synchrotron X-ray absorption spectroscopy measurements. Ceria is a well-studied cocatalyst for other heterogeneous and electrochemical reactions, and our discovery introduces biphasic cocatalysis as a design concept for improved OER electrocatalysts. The unique electrochemical behavior of the Ni0.3Fe0.07Co0.2Ce0.43Oxoxygen evolution electrocatalyst motivates detailed structural characterization to elucidate the underlying catalytic mechanism. Atomic resolution transmission electron microscopy imaging using inline holography techniques reveals a nanostructure in which transition metal oxide alloys form atomically sharp boundaries with ceria nanocrystals. Synchrotron X-ray absorption spectroscopy measurements confirm this unprecedented obs

Monoclinic scheelite bismuth vanadate (m-BiVO4) is a promising semiconductor photoanode for photoelectrochemical (PEC) water splitting. Despite considerable recent progress in achieving improved photocurrents and photovoltages, there remain open questions about the basic optoelectronic properties of this material. Indeed, there is disagreement about the nature of its fundamental bandgap, with theoretical predictions and some experimental observations pointing to an indirect bandgap and other experimental studies to a direct bandgap. Knowledge of this property is critical for understanding light absorption and photocarrier properties, as well as for establishing rational approaches to improved efficiency. Here, experimental spectroscopic techniques are used to resolve this issue and provide a fundamental portrait of the optical properties of the material. Resonant inelastic X-ray scattering proves conclusively that m-BiVO4 is an indirect bandgap semiconductor. These measurements are supported by UV-vis absorption spectroscopy and spectroscopic ellipsometry, which confirm this finding and also indicate the presence of a direct transition located at 200 meV above the indirect one. The spectral dependence of the optical constants is determined by development of a photophysical model for the ellipsometric data. Photogenerated carrier dynamics are probed by transient absorption spectroscopy, which reveals a relatively long lifetime compared to other commonly utilized metal oxide photoanodes and is attributed to the indirect nature of the fundamental gap. The combination of strong visible light absorption and relatively long excited state lifetime provides the basis for the high performance that has been achieved from BiVO4 photoanodes for water splitting.

The co-existence of "axial" and "rhombic" coordination environments has been demonstrated in a "Type 1" copper site of Pseudoazurin. This observation opens up previously not considered interpretations for the relationship between geometry and electronic structure of the four coordinate copper site. The Met16 variants of pseudoazurin were considered as model systems for investigating the effect of weak interactions from the second coordination sphere. The correlation between geometric and electronic structures of "Type 1" copper site was evaluated by the multi-edge (Cu K-edge and S K-edge) X-ray absorption spectroscopy (XAS) of Met16 variants of pseudoazurin. The co-existing axial and rhombic sites in pseudoazurin were characterized by Culigand distances, effective nuclear charge, and Cu-S( Cys) covalency from XAS. The XAS results were correlated with DFT calculations for investigating the effect of protein environment from the inner-sphere and beyond around the Cu site. The combined experimental and theoretical results support the presence of a close correlation between outer sphere environment and inner sphere coordination environment. This is achieved in pseudoazurin by a previously undisclosed allosteric effect that involves a rearrangement of the protein tertiary structure.