Search

The current status and the progress of R&D activities for a Fusion DEMO reactor in the QST Rokkasho Fusion Institute is reported. In order to advance the JA DEMO activity, not only Japanese domestic activity but also international collaborations of Broader Approach Activity and ITER related activities are conducted in the QST Rokkasho Fusion Institute. Activities for DEMO design and relevant R&D, design of a fusion neutron source and development of an accelerator, ITER-TBS, tritium handling technology and information technology infrastructures including a supercomputer system and a remote experimentation system are carried out for a Fusion DEMO reactor.

Solid tritium breeding materials are expected to be used in high-temperature conditions for a long time in a fusion DEMO reactor. Thus, it is important to understand how bred tritium releases from the long-term heated material under the environment as close to a DEMO condition as possible to establish a tritium fuel cycle and keep it safe. In this work, the tritium release behavior from the irradiated Li2TiO3 pebbles that was preheated for 720 h at most was observed by heating at 1000 °C under 1000 Pa H2/Ar gas flow. The release peaks of HTO and HT were observed around 300 °C due to the desorption of the chemisorbed water. Also, the broad HTO peak was observed in a higher temperature region despite purging H2/Ar gas. This result suggests that this tritium was released without exchanging with H2 but with combining with oxygen in the pebbles. Moreover, the released tritium amount decreased as the pre-heating time. Finally, the amount of tritium that could not be released by the heating experiment was quantified by dissolving samples with an acid solution. Besides, the total tritium release ratio was discussed.

Tritium breeding ceramic materials are placed at high temperatures for a long period in a fusion DEMO reactor. Therefore, the understanding of Li mass loss phenomena and its influence on tritium behavior are important. In this study, the pebbles of Li2TiO3 with excess Li were heated at 900 °C for 30 days in a 1000 Pa H2/Ar flow and tritium sorption and recovery experiments were carried out. Li mass loss by the heating was evaluated to be 0.7 wt%. The value of Li mass loss was almost same as that for 3 days heating at the same condition. Tritium sorption capacity for the heated pebbles at 600 °C and 900 °C were almost same as that for the pebbles as received. Tritium sorbed in the pebbles could not be recovered effectively by the 1000 Pa H2/Ar purge at room temperature and 300 °C but it could be recovered at 600 °C and 900 °C. The influence of the long-time heating on the behavior of tritium sorbed in the pebbles was not large.