Search

It is well-known that soil and water conservation actions (e.g., installing water diversion structures) are necessary to restore skid trails after logging operations. However, there are some points that have yet to be determined concerning the efficacy of rehabilitation on sediment yield and nutrient export to the aquatic environment. The objectives of this study were to determine the optimal distance among the water diversion structures (WDSs) to suppress runoff, sediment yield, and measure nitrate and phosphate concentrations on the skid trails of a mountainous ecosystem. The study was conducted on a total of 18 bounded runoff plots, each with a width of 4 m and a length of 120 m, divided into six treatment compartments done in triplicate. Beech logs were placed at a distance of 5, 10, 20, 30, and 40 meters. An untreated area (U) was set up during the recording period from 18 September 2015 to 17 September 2016. In all the WDS treatments and untreated trails (U), the observed peaks of runoff, sediment yield, as well as nitrate and phosphate concentrations was found to be significantly correlated with the amount of rainfall events. Results show that there was a decrease in surface runoff and runoff coefficient, sediment yield, and nitrate and phosphate concentrations by installing of WDS at different distances. The runoff and runoff coefficients (2.67 mm and 0.101, respectively) were at the lowest level in the WDS20 (WDS at a distance of 20 m). The sediment yield was significantly higher on the U, 13.52 g m-2 followed by WDS40, whereas the lowest values were detected at the WDS10. Significantly higher values of nitrate were found in the U (3.63 mg l-1), while the lowest amounts of nitrate were determined at WDS5 followed by the WDS20 treatment. The highest values of phosphate were found on the U treatment (0.278 mg l-1) followed by the WDS40 treatment, whereas the lowest phosphate values were measured in the WDS20 treated area. Therefore, it can be deduced that the

Aim of study: The main aims of this study were to determine of damage level to residual stand and soil disturbance from mechanized selection logging. Area of study: Mixed beech stands in Caspian forests, northern Iran.Material and methods: Point-transect and systematic plot sampling were used for assessing damages to soil and trees, respectively.Main results: 89% of forest soil area was undisturbed or shallow disturbed, and 5.2% was deep disturbed. Soil bulk density of top 10 cm in the winching corridors, ruts and skid trails were increased 10.7%, 20.6% and 32.1% respectively than controlled area. Frequency of damages to regeneration and trees were 12% and 11.2%. The frequency of damages to regeneration was increased with increasing of their heights, but frequency of damages to trees was decreased with increasing of their diameter. The most type of damages was bole wounds in sizes of 100 to 200 cm2 within 1 m from the ground level, and deep wounds. The frequency of damages was different in tree species (p = 0.001). The mean size of bole wounds was 174 cm2, and the mean height of bole wounds was 70 cm from ground level. The intensity of wounds on trees bole were decreased with increasing of their heights from ground level (p = 0.02), while their sizes were increased (p = 0.001).Research highlights: Winching of logs was the main cause of damages to soil and residual stand. The detailed planning strategy will reduce damage to level which is acceptable and predictable.

Aim of study: The main aims of this study were to determine of damage level to residual stand and soil disturbance from mechanized selection logging. Area of study: Mixed beech stands in Caspian forests, northern Iran.Material and methods: Point-transect and systematic plot sampling were used for assessing damages to soil and trees, respectively.Main results: 89% of forest soil area was undisturbed or shallow disturbed, and 5.2% was deep disturbed. Soil bulk density of top 10 cm in the winching corridors, ruts and skid trails were increased 10.7%, 20.6% and 32.1% respectively than controlled area. Frequency of damages to regeneration and trees were 12% and 11.2%. The frequency of damages to regeneration was increased with increasing of their heights, but frequency of damages to trees was decreased with increasing of their diameter. The most type of damages was bole wounds in sizes of 100 to 200 cm2 within 1 m from the ground level, and deep wounds. The frequency of damages was different in tree species (p = 0.001). The mean size of bole wounds was 174 cm2, and the mean height of bole wounds was 70 cm from ground level. The intensity of wounds on trees bole were decreased with increasing of their heights from ground level (p = 0.02), while their sizes were increased (p = 0.001).Research highlights: Winching of logs was the main cause of damages to soil and residual stand. The detailed planning strategy will reduce damage to level which is acceptable and predictable.