Search

The ability to synthesize a wide range of nanostructured materials, as well as integrate them into larger systems, is fundamental to the development of next-generation micro- and optoelectronic devices, sensors, and energy harvesting and storage technologies. Toward this goal, we have developed a versatile, plasma spray-like deposition technique, based on flow-through microhollow cathode discharges (MHCDs) at 10-100 Torr. These microplasma jet sources can deposit nanoparticles, dense layers, and structured thin films of crystalline materials on virtually any surface (e.g., conductors, insulators, polymers, fibers, and lithographic patterns). Supersonic microplasma jets are seeded with organometallic precursors under oxidizing conditions to create a directed flux of growth species (e.g., atoms, ions, clusters, and/or nanoparticles) that are subsequently ‘spray-deposited’ onto the surface of interest at room temperature. A diverse range of nanostructured transition metal oxide materials, e.g., CuO, MnO2, RuO2, NiO, Fe2O3, CoxOy, and spinels (NiCo2O4) can be realized with the technique. These films were then used for electrochemical energy storage applications and are discussed with emphasis on the fabrication of microscale energy storage devices. We also highlight detailed measurements of Trot, Tvib, Te, and ne on various jets made using trace gas optical emission spectroscopy (OES) and Langmuir probe studies.

The ability to synthesize a wide range of nanostructured materials, as well as integrate them into larger systems, is fundamental to the development of next-generation micro- and optoelectronic devices, sensors, and energy harvesting and storage technologies. Toward this goal, we have developed a versatile, plasma spray-like deposition technique, based on flow-through microhollow cathode discharges (MHCDs) at 10-100 Torr. These microplasma jet sources can deposit nanoparticles, dense layers, and structured thin films of crystalline materials on virtually any surface (e.g., conductors, insulators, polymers, fibers, and lithographic patterns). Supersonic microplasma jets are seeded with organometallic precursors under oxidizing conditions to create a directed flux of growth species (e.g., atoms, ions, clusters, and/or nanoparticles) that are subsequently ‘spray-deposited’ onto the surface of interest at room temperature. A diverse range of nanostructured transition metal oxide materials, e.g., CuO, MnO2, RuO2, NiO, Fe2O3, CoxOy, and spinels (NiCo2O4) can be realized with the technique. These films were then used for electrochemical energy storage applications and are discussed with emphasis on the fabrication of microscale energy storage devices. We also highlight detailed measurements of Trot, Tvib, Te, and ne on various jets made using trace gas optical emission spectroscopy (OES) and Langmuir probe studies.

A great deal of scientific research in recent decades has been focused on bringing newand more efficient forms of solar energy to market, as well as making existing solar energytechnology more viable. Two of the central issues in this research have been energy stor-age, to account for the discrepancy between hours peak production and hours of usage,and the efficiency of photovoltaic devices. Coming from an infrastructure built off ofburning chemical fuels, storing solar energy in chemical bonds to make so-called ’solarfuels’ has been one of the major area of research. This involves both photovoltaic andelectrocatalytic aspects, which can be incorporated into single devices or implementedseparately with a discrete photovoltaic driving an electrochemical reaction. We haveused in-operando Raman spectroscopy to to improve understanding of a popular anodematerial for the splitting of water, Manganese Oxide, as it undergoes structural changesduring operation; with implications for the production of more efficient anodes.Further, we have the sought to improve the functionality of existing materials bythe use of oscillations of electrons in metal nanostructures. The collective oscillations ofconduction electrons at the surface of metals, called surface plasmons, induce an electricfield in surrounding dielectric materials called the surface plasmon polariton. This can betuned by manipulation of the structure of the metal on the length scale of the mean freepath of electrons in the metal. By careful manipulation of noble metal nanostructures, we have been able to manipulate the properties of semiconductor electrodes - shiftingthe product distribution of CO2 reduction on Cu2 O. Additionally, we have been ableto use plasmonic nanoparticles to make pan-chromatic light aborbers for photovoltaicapplications.

A great deal of scientific research in recent decades has been focused on bringing newand more efficient forms of solar energy to market, as well as making existing solar energytechnology more viable. Two of the central issues in this research have been energy stor-age, to account for the discrepancy between hours peak production and hours of usage,and the efficiency of photovoltaic devices. Coming from an infrastructure built off ofburning chemical fuels, storing solar energy in chemical bonds to make so-called ’solarfuels’ has been one of the major area of research. This involves both photovoltaic andelectrocatalytic aspects, which can be incorporated into single devices or implementedseparately with a discrete photovoltaic driving an electrochemical reaction. We haveused in-operando Raman spectroscopy to to improve understanding of a popular anodematerial for the splitting of water, Manganese Oxide, as it undergoes structural changesduring operation; with implications for the production of more efficient anodes.Further, we have the sought to improve the functionality of existing materials bythe use of oscillations of electrons in metal nanostructures. The collective oscillations ofconduction electrons at the surface of metals, called surface plasmons, induce an electricfield in surrounding dielectric materials called the surface plasmon polariton. This can betuned by manipulation of the structure of the metal on the length scale of the mean freepath of electrons in the metal. By careful manipulation of noble metal nanostructures, we have been able to manipulate the properties of semiconductor electrodes - shiftingthe product distribution of CO2 reduction on Cu2 O. Additionally, we have been ableto use plasmonic nanoparticles to make pan-chromatic light aborbers for photovoltaicapplications.

Short-chain polyphosphate (polyP) is released from platelets upon platelet activation, but it is not clear if it contributes to thrombosis. PolyP has increased propensity to clot blood with increased polymer length and when localized onto particles, but it is unknown whether spatial localization of short-chain polyP can accelerate clotting of flowing blood. Here, numerical simulations predicted the effect of localization of polyP on clotting under flow, and this was tested in vitro using microfluidics. Synthetic polyP was more effective at triggering clotting of flowing blood plasma when localized on a surface than when solubilized in solution or when localized as nanoparticles, accelerating clotting at 10-200 fold lower concentrations, particularly at low to sub-physiological shear rates typical of where thrombosis occurs in large veins or valves. Thus, sub-micromolar concentrations of short-chain polyP can accelerate clotting of flowing blood plasma under flow at low to sub-physiological shear rates. However, a physiological mechanism for the localization of polyP to platelet or vascular surfaces remains unknown.

When illuminated with visible light, nanostructured noble metals exhibit a strongplasmon resonance at wavelength, p, that has been shown to be sensitive to its size,structure, the dielectric properties of the surrounding medium, and charge density. Thetunability of the plasmon resonance has allowed metal nanosystems to be fabricated withresonances matching the solar spectrum for us in plasmon promoted catalysis, plasmonicphotovoltaics, and surface-enhanced raman spectroscopy. Here we use UV-Visible spectroscopyto track the shifts of the plasmon resonances from an array of gold nanoparticlesburied under metal oxide layers of varying thickness when in contact with one of two bulkmetals: aluminum or silver. By assuming the array of gold nanoparticles and metal-oxidelayers to be an optically homogenous lm of core-shell particles on a substrate, we developeda Maxwell-Garnett effective medium approximation to extract reliable opticalparameters for the gold nanoparticles, yielding their charge state before and after contactwith the bulk metal.Based on the optical parameters extracted from our model, we nd the magnitude ofcharge transfer from the bulk metal to the gold nanoparticle is independent of the workfunction of the bulk metal. Furthermore, when gold is used as the bulk layer in contactwith the gold nanoparticles, we measured an appreciable amount of charge transfer to thegold nanoparticles, failing to support the well-established model for electrostatic contactelectrication. Instead, we attribute the charge transfer to the so called plasmoelectriceffect, an optically induced charge transfer mechanism, in which the gold nanoparticlemodifes its charge density to allow its resonant wavelength to match that of the incidentlight. We show, however, that in our devices the Schottky barriers between the metalsand the metal oxide layers create a rectication effect that favors electron transfer fromthe bulk metal to the nanoparticles over the reverse effect.

When illuminated with visible light, nanostructured noble metals exhibit a strongplasmon resonance at wavelength, p, that has been shown to be sensitive to its size,structure, the dielectric properties of the surrounding medium, and charge density. Thetunability of the plasmon resonance has allowed metal nanosystems to be fabricated withresonances matching the solar spectrum for us in plasmon promoted catalysis, plasmonicphotovoltaics, and surface-enhanced raman spectroscopy. Here we use UV-Visible spectroscopyto track the shifts of the plasmon resonances from an array of gold nanoparticlesburied under metal oxide layers of varying thickness when in contact with one of two bulkmetals: aluminum or silver. By assuming the array of gold nanoparticles and metal-oxidelayers to be an optically homogenous lm of core-shell particles on a substrate, we developeda Maxwell-Garnett effective medium approximation to extract reliable opticalparameters for the gold nanoparticles, yielding their charge state before and after contactwith the bulk metal.Based on the optical parameters extracted from our model, we nd the magnitude ofcharge transfer from the bulk metal to the gold nanoparticle is independent of the workfunction of the bulk metal. Furthermore, when gold is used as the bulk layer in contactwith the gold nanoparticles, we measured an appreciable amount of charge transfer to thegold nanoparticles, failing to support the well-established model for electrostatic contactelectrication. Instead, we attribute the charge transfer to the so called plasmoelectriceffect, an optically induced charge transfer mechanism, in which the gold nanoparticlemodifes its charge density to allow its resonant wavelength to match that of the incidentlight. We show, however, that in our devices the Schottky barriers between the metalsand the metal oxide layers create a rectication effect that favors electron transfer fromthe bulk metal to the nanoparticles over the reverse effect.

Short-chain polyphosphate (polyP) is released from platelets upon platelet activation, but it is not clear if it contributes to thrombosis. PolyP has increased propensity to clot blood with increased polymer length and when localized onto particles, but it is unknown whether spatial localization of short-chain polyP can accelerate clotting of flowing blood. Here, numerical simulations predicted the effect of localization of polyP on clotting under flow, and this was tested in vitro using microfluidics. Synthetic polyP was more effective at triggering clotting of flowing blood plasma when localized on a surface than when solubilized in solution or when localized as nanoparticles, accelerating clotting at 10-200 fold lower concentrations, particularly at low to sub-physiological shear rates typical of where thrombosis occurs in large veins or valves. Thus, sub-micromolar concentrations of short-chain polyP can accelerate clotting of flowing blood plasma under flow at low to sub-physiological shear rates. However, a physiological mechanism for the localization of polyP to platelet or vascular surfaces remains unknown.

Plasmonic metal/semiconductor heterostructures show promise for visible-light-driven photocatalysis. Gold nanorods (AuNRs) semi-coated with TiO2 are expected to be ideally structured systems for hydrogen evolution. Synthesizing such structures by wet-chemistry methods, however, has proved challenging. Here we report the bottom-up synthesis of AuNR/TiO2 nanodumbbells (NDs) with spatially separated Au/TiO2 regions, whose structures are governed by the NRs' diameter, and the higher curvature and lower density of CnTAB surfactant at the NRs' tips than on their lateral surfaces, as well as the morphology's dependence on concentration, and alkyl chain length of CnTAB. The NDs show plasmon-enhanced H2 evolution under visible and near-infrared light.

Developing electrode materials with high-energy densities is important for the development of lithium-ion batteries. Here, we demonstrate a mesoporous molybdenum dioxide material with abnormal lithium-storage sites, which exhibits a discharge capacity of 1,814 mAh g(-1) for the first cycle, more than twice its theoretical value, and maintains its initial capacity after 50 cycles. Contrary to previous reports, we find that a mechanism for the high and reversible lithium-storage capacity of the mesoporous molybdenum dioxide electrode is not based on a conversion reaction. Insight into the electrochemical results, obtained by in situ X-ray absorption, scanning transmission electron microscopy analysis combined with electron energy loss spectroscopy and computational modelling indicates that the nanoscale pore engineering of this transition metal oxide enables an unexpected electrochemical mass storage reaction mechanism, and may provide a strategy for the design of cation storage materials for battery systems.

Plasmonic metal/semiconductor heterostructures show promise for visible-light-driven photocatalysis. Gold nanorods (AuNRs) semi-coated with TiO2 are expected to be ideally structured systems for hydrogen evolution. Synthesizing such structures by wet-chemistry methods, however, has proved challenging. Here we report the bottom-up synthesis of AuNR/TiO2 nanodumbbells (NDs) with spatially separated Au/TiO2 regions, whose structures are governed by the NRs' diameter, and the higher curvature and lower density of CnTAB surfactant at the NRs' tips than on their lateral surfaces, as well as the morphology's dependence on concentration, and alkyl chain length of CnTAB. The NDs show plasmon-enhanced H2 evolution under visible and near-infrared light.

Developing electrode materials with high-energy densities is important for the development of lithium-ion batteries. Here, we demonstrate a mesoporous molybdenum dioxide material with abnormal lithium-storage sites, which exhibits a discharge capacity of 1,814 mAh g(-1) for the first cycle, more than twice its theoretical value, and maintains its initial capacity after 50 cycles. Contrary to previous reports, we find that a mechanism for the high and reversible lithium-storage capacity of the mesoporous molybdenum dioxide electrode is not based on a conversion reaction. Insight into the electrochemical results, obtained by in situ X-ray absorption, scanning transmission electron microscopy analysis combined with electron energy loss spectroscopy and computational modelling indicates that the nanoscale pore engineering of this transition metal oxide enables an unexpected electrochemical mass storage reaction mechanism, and may provide a strategy for the design of cation storage materials for battery systems.

Constructing nanoparticles into well-defined structures at mesoscale and larger to create novel functional materials remains a challenge. Inspired by atomic epitaxial growth, we propose an "epitaxial assembly" method to form two-dimensional nanoparticle arrays (2D NAs) directly onto desired materials. As an illustration, we employ a series of surfactant-capped nanoparticles as the "artificial atoms" and layered hybrid perovskite (LHP) materials as the substrates and obtain 2D NAs in a large area with few defects. This method is universal for nanoparticles with different shapes, sizes, and compositions and for LHP substrates with different metallic cores. Raman spectroscopic and X-ray diffraction data support our hypothesis of epitaxial assembly. The novel method offers new insights into the controllable assembly of complex functional materials and may push the development of materials science at the mesoscale.

We report a new electrochemical capacitor with an aqueous KI-KOH electrolyte that exhibits a higher specific energy and power than the state-of-the-art nonaqueous electrochemical capacitors. In addition to electrical double layer capacitance, redox reactions in this device contribute to charge storage at both positive and negative electrodes via a catholyte of IOx-/I- couple and a redox couple of H2O/Had, respectively. Here, we, for the first time, report utilizing IOx-/I- redox couple for the positive electrode, which pins the positive electrode potential to be 0.4-0.5 V vs Ag/AgCl. With the positive electrode potential pinned, we can polarize the cell to 1.6 V without breaking down the aqueous electrolyte so that the negative electrode potential could reach -1.1 V vs Ag/AgCl in the basic electrolyte, greatly enhancing energy storage. Both mass spectroscopy and Raman spectrometry confirm the formation of IO3- ions (+5) from I- (-1) after charging. Based on the total mass of electrodes and electrolyte in a practically relevant cell configuration, the device exhibits a maximum specific energy of 7.1 Wh/kg, operates between -20 and 50 °C, provides a maximum specific power of 6222 W/kg, and has a stable cycling life with 93% retention of the peak specific energy after 14,000 cycles.

Zeolites are crystalline inorganic solids with microporous structures, having widespread applications in the fields of catalysis, separation, adsorption, microelectronics, and medical diagnosis. A major drawback of zeolites is the mass transfer limitation due to the small size of the micropores (less than 1 nm). Numerous efforts have been dedicated to integrating mesopores with the microporous zeolite structures by using templating and/or destructive approaches. Here we provide a new strategy for hierarchical pore size zeolite synthesis, without using supramolecular or hard templates. The branching epitaxial growth behavior, as a result of aluminum-zoning, contributes to the formation of the hierarchical porous zeolite structures.

We have developed a facile procedure that can create asymmetrical building blocks by uniformly deforming nanospheres into C(∞v) symmetry at low cost and high quality. Concave polystyrene@carbon (PS@C) core-shell nanospheres were produced by a very simple microwave-assisted alcohol thermal treatment of spherical PS@C nanoparticles. The dimensions and ratio of the concave part can be precisely controlled by temperature and solvents. The concavity is created by varying the alcohol-thermal treatment to tune the swelling properties that lead to the mechanical deformation of the PS@C core-shell structure. The driving force is attributed to the significant volume increase that occurs upon polystyrene core swelling with the incorporation of solvent. We propose a mechanism adapted from published models for the depression of soft capsules. An extrapolation from this model predicts that the rigid shell is used to generate a cavity in the unbuckled shell, which is experimentally confirmed. This swelling and deformation route is flexible and should be applicable to other polymeric nanoparticles to produce asymmetrical nanoparticles.

We present a silica nanoparticle (SNP) functionalized with polyphosphate (polyP) that accelerates the natural clotting process of the body. SNPs initiate the contact pathway of the blood-clotting system; short-chain polyP accelerates the common pathway by the rapid formation of thrombin, which enhances the overall blood-clotting system, both by accelerating fibrin generation and by facilitating the regulatory anticoagulation mechanisms essential for hemostasis. Analysis of the clotting properties of bare SNPs, bare polyP, and polyP-functionalized SNPs in plasma demonstrated that the attachment of polyP to SNPs to form polyP-SNPs creates a substantially enhanced synergistic effect that lowers clotting time and increases thrombin production at low concentrations. PolyP-SNP even retains its clotting function at ambient temperature. The polyP-SNP system has the potential to significantly improve trauma-treatment protocols and outcomes in hospital and prehospital settings.

Electrochemical double-layer capacitors exhibit high power and long cycle life but have low specific energy compared with batteries, limiting applications. Redox-enhanced capacitors increase specific energy by using redox-active electrolytes that are oxidized at the positive electrode and reduced at the negative electrode during charging. Here we report characteristics of several redox electrolytes to illustrate operational/self-discharge mechanisms and the design rules for high performance. We discover a methyl viologen (MV)/bromide electrolyte that delivers a high specific energy of ∼14 Wh kg(-1) based on the mass of electrodes and electrolyte, without the use of an ion-selective membrane separator. Substituting heptyl viologen for MV increases stability, with no degradation over 20,000 cycles. Self-discharge is low, due to adsorption of the redox couples in the charged state to the activated carbon, and comparable to cells with inert electrolyte. An electrochemical model reproduces experiments and predicts that 30-50 Wh kg(-1) is possible with optimization.

The optical resonances of plasmonic nanostructures depend critically on the geometrical details of the absorber. We show that this unique property of plasmons can potentially be used to create panchromatic absorbers covering most of the useful solar spectrum, by measuring the light-to-hydrogen conversion capabilities of a series multielectrode photocatalytic devices, based on functionalized gold nanorods of appropriately chosen aspect ratios. Judiciously combining nanorods of various aspect ratios almost doubles the H2 production of the device over what is optimally possible with a device using gold nanorods of a single aspect ratio (all other key parameters being equal). The estimated quantum efficiency (absorbed photons-to-hydrogen) averaged over the entire solar spectrum of the best performing plasmonic multielectrode array was approximately 0.1%, and the measured H2 production rate for all of the devices was found to be approximately proportional to the hot electron generation. The device was monitored continuously for over 200 hr of operation without measurable diminution in the rate.

Zeolites are crystalline inorganic solids with microporous structures, having widespread applications in the fields of catalysis, separation, adsorption, microelectronics, and medical diagnosis. A major drawback of zeolites is the mass transfer limitation due to the small size of the micropores (less than 1 nm). Numerous efforts have been dedicated to integrating mesopores with the microporous zeolite structures by using templating and/or destructive approaches. Here we provide a new strategy for hierarchical pore size zeolite synthesis, without using supramolecular or hard templates. The branching epitaxial growth behavior, as a result of aluminum-zoning, contributes to the formation of the hierarchical porous zeolite structures.

Zeolites are crystalline inorganic solids with microporous structures, having widespread applications in the fields of catalysis, separation, adsorption, microelectronics, and medical diagnosis. A major drawback of zeolites is the mass transfer limitation due to the small size of the micropores (less than 1 nm). Numerous efforts have been dedicated to integrating mesopores with the microporous zeolite structures by using templating and/or destructive approaches. Here we provide a new strategy for hierarchical pore size zeolite synthesis, without using supramolecular or hard templates. The branching epitaxial growth behavior, as a result of aluminum-zoning, contributes to the formation of the hierarchical porous zeolite structures.

We have developed a facile procedure that can create asymmetrical building blocks by uniformly deforming nanospheres into C(∞v) symmetry at low cost and high quality. Concave polystyrene@carbon (PS@C) core-shell nanospheres were produced by a very simple microwave-assisted alcohol thermal treatment of spherical PS@C nanoparticles. The dimensions and ratio of the concave part can be precisely controlled by temperature and solvents. The concavity is created by varying the alcohol-thermal treatment to tune the swelling properties that lead to the mechanical deformation of the PS@C core-shell structure. The driving force is attributed to the significant volume increase that occurs upon polystyrene core swelling with the incorporation of solvent. We propose a mechanism adapted from published models for the depression of soft capsules. An extrapolation from this model predicts that the rigid shell is used to generate a cavity in the unbuckled shell, which is experimentally confirmed. This swelling and deformation route is flexible and should be applicable to other polymeric nanoparticles to produce asymmetrical nanoparticles.

The optical resonances of plasmonic nanostructures depend critically on the geometrical details of the absorber. We show that this unique property of plasmons can potentially be used to create panchromatic absorbers covering most of the useful solar spectrum, by measuring the light-to-hydrogen conversion capabilities of a series multielectrode photocatalytic devices, based on functionalized gold nanorods of appropriately chosen aspect ratios. Judiciously combining nanorods of various aspect ratios almost doubles the H2 production of the device over what is optimally possible with a device using gold nanorods of a single aspect ratio (all other key parameters being equal). The estimated quantum efficiency (absorbed photons-to-hydrogen) averaged over the entire solar spectrum of the best performing plasmonic multielectrode array was approximately 0.1%, and the measured H2 production rate for all of the devices was found to be approximately proportional to the hot electron generation. The device was monitored continuously for over 200 hr of operation without measurable diminution in the rate.

We report a new electrochemical capacitor with an aqueous KI-KOH electrolyte that exhibits a higher specific energy and power than the state-of-the-art nonaqueous electrochemical capacitors. In addition to electrical double layer capacitance, redox reactions in this device contribute to charge storage at both positive and negative electrodes via a catholyte of IOx-/I- couple and a redox couple of H2O/Had, respectively. Here, we, for the first time, report utilizing IOx-/I- redox couple for the positive electrode, which pins the positive electrode potential to be 0.4-0.5 V vs Ag/AgCl. With the positive electrode potential pinned, we can polarize the cell to 1.6 V without breaking down the aqueous electrolyte so that the negative electrode potential could reach -1.1 V vs Ag/AgCl in the basic electrolyte, greatly enhancing energy storage. Both mass spectroscopy and Raman spectrometry confirm the formation of IO3- ions (+5) from I- (-1) after charging. Based on the total mass of electrodes and electrolyte in a practically relevant cell configuration, the device exhibits a maximum specific energy of 7.1 Wh/kg, operates between -20 and 50 °C, provides a maximum specific power of 6222 W/kg, and has a stable cycling life with 93% retention of the peak specific energy after 14,000 cycles.

Zeolites are crystalline inorganic solids with microporous structures, having widespread applications in the fields of catalysis, separation, adsorption, microelectronics, and medical diagnosis. A major drawback of zeolites is the mass transfer limitation due to the small size of the micropores (less than 1 nm). Numerous efforts have been dedicated to integrating mesopores with the microporous zeolite structures by using templating and/or destructive approaches. Here we provide a new strategy for hierarchical pore size zeolite synthesis, without using supramolecular or hard templates. The branching epitaxial growth behavior, as a result of aluminum-zoning, contributes to the formation of the hierarchical porous zeolite structures.

We present a silica nanoparticle (SNP) functionalized with polyphosphate (polyP) that accelerates the natural clotting process of the body. SNPs initiate the contact pathway of the blood-clotting system; short-chain polyP accelerates the common pathway by the rapid formation of thrombin, which enhances the overall blood-clotting system, both by accelerating fibrin generation and by facilitating the regulatory anticoagulation mechanisms essential for hemostasis. Analysis of the clotting properties of bare SNPs, bare polyP, and polyP-functionalized SNPs in plasma demonstrated that the attachment of polyP to SNPs to form polyP-SNPs creates a substantially enhanced synergistic effect that lowers clotting time and increases thrombin production at low concentrations. PolyP-SNP even retains its clotting function at ambient temperature. The polyP-SNP system has the potential to significantly improve trauma-treatment protocols and outcomes in hospital and prehospital settings.

Constructing nanoparticles into well-defined structures at mesoscale and larger to create novel functional materials remains a challenge. Inspired by atomic epitaxial growth, we propose an "epitaxial assembly" method to form two-dimensional nanoparticle arrays (2D NAs) directly onto desired materials. As an illustration, we employ a series of surfactant-capped nanoparticles as the "artificial atoms" and layered hybrid perovskite (LHP) materials as the substrates and obtain 2D NAs in a large area with few defects. This method is universal for nanoparticles with different shapes, sizes, and compositions and for LHP substrates with different metallic cores. Raman spectroscopic and X-ray diffraction data support our hypothesis of epitaxial assembly. The novel method offers new insights into the controllable assembly of complex functional materials and may push the development of materials science at the mesoscale.

Electrochemical double-layer capacitors exhibit high power and long cycle life but have low specific energy compared with batteries, limiting applications. Redox-enhanced capacitors increase specific energy by using redox-active electrolytes that are oxidized at the positive electrode and reduced at the negative electrode during charging. Here we report characteristics of several redox electrolytes to illustrate operational/self-discharge mechanisms and the design rules for high performance. We discover a methyl viologen (MV)/bromide electrolyte that delivers a high specific energy of ∼14 Wh kg(-1) based on the mass of electrodes and electrolyte, without the use of an ion-selective membrane separator. Substituting heptyl viologen for MV increases stability, with no degradation over 20,000 cycles. Self-discharge is low, due to adsorption of the redox couples in the charged state to the activated carbon, and comparable to cells with inert electrolyte. An electrochemical model reproduces experiments and predicts that 30-50 Wh kg(-1) is possible with optimization.

We describe a general approach for the synthesis of micro-/nanostructured metal chalcogenides from elemental precursors. The excellent solubility of sulfur, selenium, and tellurium in phosphonium ionic liquids promotes fast reactions between chalcogens and various metal powders upon microwave heating, giving crystalline products. This approach is green, universal, and scalable.

The Li-S system offers a tantalizing battery for electric vehicles and renewable energy storage due to its high theoretical capacity of 1675 mAh g(-1) and its employment of abundant and available materials. One major challenge in this system stems from the formation of soluble polysulfides during the reduction of S8, the active cathode material, during discharge. The ability to deploy this system hinges on the ability to control the behavior of these polysulfides by containing them in the cathode and allowing for further redox. Here, we exploit the high surface areas and good electrical conductivity of mesoporous carbons (MC) to achieve high sulfur utilization while functionalizing the MC with sulfur (S-MC) in order to modify the surface chemistry and attract polysulfides to the carbon material. S-MC materials show enhanced capacity and cyclability trending as a function of sulfur functionality, specifically a 50% enhancement in discharge capacity is observed at high cycles (60-100 cycles). Impedance spectroscopy suggests that the S-MC materials exhibit a lower charge-transfer resistance compared with MC materials which allows for more efficient electrochemistry with species in solution at the cathode. Isothermal titration calorimetry shows that the change in surface chemistry from unfunctionalized to S-functionalized carbons results in an increased affinity of the polysulfide intermediates for the S-MC materials, which is the likely cause for enhanced cyclability.

We present a rapid microwave-assisted solid-state approach to prepare complex platinum-group metal oxides with the formula La2BaMO5 (M = Pd, Pt). While conventional furnace-based preparations of these compounds take several days and often require oxidizing conditions, the microwave-assisted pathway enables the target compounds to be obtained with high phase purity in about 20 min of reaction time in air without the multiple regrindings that are required of conventional solid-state synthesis. These complex oxides are stable in various atmospheres up to 1000 °C unlike the simple noble metal oxides, which are reduced even at room temperature. Density functional theory-based calculations have been employed to establish the stability of these complex oxides and to understand the electronic structure origins of the stability, most notably the influence of electropositive cations. It is shown that the presence of electropositive ions in the oxide crystal structure "softens" the oxygen anion and results in more covalent (Pd/Pt)-O interactions.

An approach based on a solution-based synthesis that produces a thermally stable Ag/oxide/S₂ Te₃ -Te metal-semiconductor heterostructure is described. With this approach, a figure of merit of zT = 1.0 at 460 K is achieved, a record for a heterostructured material made using wet chemistry. Combining experiments and theory shows that the large increase in the material's Seebeck coefficient results from hot carrier filtering.

For the first time, we demonstrate that orthorhombic V2O5 can exhibit superior electrochemical performance in sodium ion batteries when uniformly coated inside nanoporous carbon. The encapsulated V2O5 shows a specific capacity as high as 276 mAh/g, while the whole nanocomposite exhibits a capacity of 170 mAh/g. The V2O5/C composite was fabricated by a novel ambient hydrolysis deposition that features sequential water vapor adsorption in nanoporous carbon, followed by a hydrolysis reaction, exclusively inside the nanopores. The unique structure of the nanocomposite significantly enhances the capacity as well as the rate performance of orthorhombic V2O5 where the composite retains a capacity of over 90 mAh/g at a current rate of 640 mA/g. Furthermore, by calculating, we also revealed that a large portion of the sodium-ion storage, particularly at high current rates, is due to the V2O5 pseudocapacitance.

[EN] We describe a general approach for the synthesis of micro-/nanostructured metal chalcogenides from elemental precursors. The excellent solubility of sulfur, selenium, and tellurium in phosphonium ionic liquids promotes fast reactions between chalcogens and various metal powders upon microwave heating, giving crystalline products. This approach is green, universal, and scalable.

[EN] We describe a general approach for the synthesis of micro-/nanostructured metal chalcogenides from elemental precursors. The excellent solubility of sulfur, selenium, and tellurium in phosphonium ionic liquids promotes fast reactions between chalcogens and various metal powders upon microwave heating, giving crystalline products. This approach is green, universal, and scalable.

An approach based on a solution-based synthesis that produces a thermally stable Ag/oxide/S₂ Te₃ -Te metal-semiconductor heterostructure is described. With this approach, a figure of merit of zT = 1.0 at 460 K is achieved, a record for a heterostructured material made using wet chemistry. Combining experiments and theory shows that the large increase in the material's Seebeck coefficient results from hot carrier filtering.

We describe a general approach for the synthesis of micro-/nanostructured metal chalcogenides from elemental precursors. The excellent solubility of sulfur, selenium, and tellurium in phosphonium ionic liquids promotes fast reactions between chalcogens and various metal powders upon microwave heating, giving crystalline products. This approach is green, universal, and scalable.

The Li-S system offers a tantalizing battery for electric vehicles and renewable energy storage due to its high theoretical capacity of 1675 mAh g(-1) and its employment of abundant and available materials. One major challenge in this system stems from the formation of soluble polysulfides during the reduction of S8, the active cathode material, during discharge. The ability to deploy this system hinges on the ability to control the behavior of these polysulfides by containing them in the cathode and allowing for further redox. Here, we exploit the high surface areas and good electrical conductivity of mesoporous carbons (MC) to achieve high sulfur utilization while functionalizing the MC with sulfur (S-MC) in order to modify the surface chemistry and attract polysulfides to the carbon material. S-MC materials show enhanced capacity and cyclability trending as a function of sulfur functionality, specifically a 50% enhancement in discharge capacity is observed at high cycles (60-100 cycles). Impedance spectroscopy suggests that the S-MC materials exhibit a lower charge-transfer resistance compared with MC materials which allows for more efficient electrochemistry with species in solution at the cathode. Isothermal titration calorimetry shows that the change in surface chemistry from unfunctionalized to S-functionalized carbons results in an increased affinity of the polysulfide intermediates for the S-MC materials, which is the likely cause for enhanced cyclability.

For the first time, we demonstrate that orthorhombic V2O5 can exhibit superior electrochemical performance in sodium ion batteries when uniformly coated inside nanoporous carbon. The encapsulated V2O5 shows a specific capacity as high as 276 mAh/g, while the whole nanocomposite exhibits a capacity of 170 mAh/g. The V2O5/C composite was fabricated by a novel ambient hydrolysis deposition that features sequential water vapor adsorption in nanoporous carbon, followed by a hydrolysis reaction, exclusively inside the nanopores. The unique structure of the nanocomposite significantly enhances the capacity as well as the rate performance of orthorhombic V2O5 where the composite retains a capacity of over 90 mAh/g at a current rate of 640 mA/g. Furthermore, by calculating, we also revealed that a large portion of the sodium-ion storage, particularly at high current rates, is due to the V2O5 pseudocapacitance.

We present a rapid microwave-assisted solid-state approach to prepare complex platinum-group metal oxides with the formula La2BaMO5 (M = Pd, Pt). While conventional furnace-based preparations of these compounds take several days and often require oxidizing conditions, the microwave-assisted pathway enables the target compounds to be obtained with high phase purity in about 20 min of reaction time in air without the multiple regrindings that are required of conventional solid-state synthesis. These complex oxides are stable in various atmospheres up to 1000 °C unlike the simple noble metal oxides, which are reduced even at room temperature. Density functional theory-based calculations have been employed to establish the stability of these complex oxides and to understand the electronic structure origins of the stability, most notably the influence of electropositive cations. It is shown that the presence of electropositive ions in the oxide crystal structure "softens" the oxygen anion and results in more covalent (Pd/Pt)-O interactions.