Search

Contains fulltext : 296656.pdf (Publisher’s version ) (Closed access), BACKGROUND: In a previous study, we found that the highly conserved hsa-miR-181a-5p is downregulated in palatal fibroblasts of non-syndromic cleft palate-only infants. OBJECTIVES: To analyze the spatiotemporal expression pattern of mmu-miR-181a-5p during palatogenesis and identify possible mRNA targets and their involved molecular pathways. MATERIAL AND METHODS: The expression of mmu-miR-181a-5p was analyzed in the developing palates of mouse embryos from E11 to E18 using qPCR and ISH. Mouse embryonic palatal mesenchyme cells from E13 were used to analyze mmu-miR-181a-5p expression during osteogenic differentiation. Differential mRNA expression and target identification were analyzed using whole transcriptome RNA sequencing after transfection with a mmu-miR-181a-5p mimic. Differentially expressed genes were linked with underlying pathways using gene set enrichment analysis. RESULTS: The expression of mmm-miR-181a-5p in the palatal shelves increased from E15 and overlapped with palatal osteogenesis. During early osteogenic differentiation, mmu-miR-181a-5p was upregulated. Transient overexpression resulted in 49 upregulated mRNAs and 108 downregulated mRNAs (adjusted P-value < 0.05 and fold change > ± 1.2). Ossification (Stc1, Mmp13) and cell-cycle-related GO terms were significantly enriched for upregulated mRNAs. Analysis of possible mRNA targets indicated significant enrichment of Hippo signaling (Ywhag, Amot, Frmd6 and Serpine1) and GO terms related to cell migration and angiogenesis. LIMITATIONS: Transient overexpression of mmu-miR-181a-5p in mouse embryonic palatal mesenchyme cells limited its analysis to early osteogenesis. CONCLUSION: Mmu-miR-181-5p expression is increased in the developing palatal shelves in areas of bone formation and targets regulators of the Hippo signaling pathway.

The importance of accurate genomic prediction of phenotypes in plant breeding is undeniable, as higher prediction accuracy can increase selection responses. In this regard, epistasis models have shown to be capable of increasing the prediction accuracy while their high computational load is challenging. In this study, we investigated the predictive ability obtained in additive and epistasis models when utilizing haplotype blocks versus pruned sets of SNPs by including phenotypic information from the last growing season. This was done by considering a single biological trait in two growing seasons (2017 and 2018) as separate traits in a multi-trait model. Thus, bivariate variants of the Genomic Best Linear Unbiased Prediction (GBLUP) as an additive model, Epistatic Random Regression BLUP (ERRBLUP) and selective Epistatic Random Regression BLUP (sERRBLUP) as epistasis models were compared with respect to their prediction accuracies for the second year. The prediction accuracies of bivariate GBLUP, ERRBLUP and sERRBLUP were assessed with eight phenotypic traits for 471/402 doubled haploid lines in the European maize landrace Kemater Landmais Gelb/Petkuser Ferdinand Rot. The results indicate that the obtained prediction accuracies are similar when utilizing a pruned set of SNPs or haplotype blocks, while utilizing haplotype blocks reduces the computational load significantly compared to the pruned sets of SNPs. The number of interactions considered in the model was reduced from 323.5/456.4 million for the pruned SNP panel to 4.4/5.5 million in the haplotype block dataset for Kemater and Petkuser landraces, respectively. Since the computational load scales linearly with the number of parameters in the model, this leads to a reduction in computational time of 98.9% from 13.5 hours for the pruned set of markers to 9 minutes for the haplotype block dataset. We further investigated the impact of genomic correlation, phenotypic correlation and trait heritability as factors af

The socio-economic impact of Fusarium odoratissimum, which is colloquially called tropical race 4 (TR4), is escalating as this fungal pathogen spreads to new banana-growing areas. Hence, the development of simple, reliable and rapid detection technologies is indispensable for implementing quarantine measures. Here, a versatile loop-mediated isothermal amplification (LAMP) assay has been developed that is applicable under field and laboratory conditions. DNA markers unique to TR4 isolates were obtained by diversity arrays technology sequencing (DArTseq), a genotyping by sequencing technology that was conducted on 27 genotypes, comprising 24 previously reported vegetative compatibility groups (VCGs) and three TR4 isolates. The developed LAMP TR4 assay was successfully tested using 22 TR4 isolates and 45 non-target fungal and bacterial isolates, as well as on infected plants under greenhouse and field conditions. The detection limit was 1 pg µL−1 pure TR4 DNA or 102 copies plasmid-localized TR4 unique sequence (SeqA) per reaction, which was not affected by background DNA in complex samples. The LAMP TR4 assay offers a powerful tool for the routine and unambiguous identification of banana plants infected with TR4, contributing to advanced diagnosis in field situations and monitoring of fusarium wilt.

Item does not contain fulltext

Item does not contain fulltext

Contains fulltext : 174775.pdf (publisher's version ) (Open Access)

Contains fulltext : 174775.pdf (publisher's version ) (Open Access)

Contains fulltext : 174775.pdf (publisher's version ) (Open Access)

A rapid LAMP (loop-mediated isothermal amplification) detection method was developed on the basis of the ITS sequence of P. viticola, the major causal agent of grape downy mildew. Among the 38 fungal and oomycete species tested, DNA isolated exclusively from P. viticola resulted in a specific product after LAMP amplification. This assay had high sensitivity and was able to detect the presence of less than 33 fg of genomic DNA per 25-μL reaction within 30 min. The infected leaves may produce sporangia that serve as a secondary inoculum. The developed LAMP assay is efficient for estimating the latent infection of grape leaves by P. viticola. When combined with the rapid and simple DNA extraction method, this assay’s total detection time is shortened to approximately one hour; therefore it is suitable for on-site detection of latent infection in the field. The sporangia levels in the air are strongly associated with disease severity. The LAMP method was also demonstrated to be able to estimate the level of sporangia released in the air in a certain period. This assay should make disease forecasting more accurate and rapid and should be helpful in decision-making regarding the control of grape downy mildew.

Een teler heeft een virus in de kas, maar hij weet niet welk virus precies? Hij heeft last van een aaltje en wil uitzoeken welk aaltje het is? Zijn de vlekjes veroorzaakt door Botrytis of door meeldauw? Binnenkort zorgen telers zelf voor antwoorden op deze vragen. Snel en goedkoop, in de kas.

Item does not contain fulltext

Item does not contain fulltext

Item does not contain fulltext

Wetenschappers hebben een methode ontwikkeld waarmee ook telers eenvoudig ter plekke kunnen vaststellen of een bepaalde ziekteverwekker in verdachte monsters aanwezig is. De methode werkt snel. Zo kan een teler binnen vijftien minuten de aanwezigheid van een ziekteverwekker in zijn kas vaststellen. Voor de identificatie hoeft hij geen specifieke kennis te hebben.

Binnen dit project is een diagnostische methode ontwikkeld die toe te passen is in planta, en die ook de meest recent beschreven (quarantaine-) soorten. Ook worden meerdere Phytophthora-soorten tegelijkertijd gedetecteerd.

Many species of fungi can cause disease in plants, animals and humans. Accurate and robust detection and quantification of fungi is essential for diagnosis, modeling and surveillance. Also direct detection of fungi enables a deeper understanding of natural microbial communities, particularly as a great many fungi are difficult or impossible to cultivate. In the last decade, effective amplification platforms, probe development and various quantitative PCR technologies have revolutionized research on fungal detection and identification. Examples of the latest technology in fungal detection and differentiation are discussed here

Binnen dit project is een diagnostische methode ontwikkeld die toe te passen is in planta, en die ook de meest recent beschreven (quarantaine-) soorten. Ook worden meerdere Phytophthora-soorten tegelijkertijd gedetecteerd.

PCR-based detection assays are prone to inhibition by substances present in environmental samples, thereby potentially leading to inaccurate target quantification or false-negative results. Internal amplification controls (IACs) have been developed to help alleviate this problem but are generally applied in a single concentration, thereby yielding less-than-optimal results across the wide range of microbial gene target concentrations possible in environmental samples (J. Hoorfar, B. Malorny, A. Abdulmawjood, N. Cook, M. Wagner, and P. Fach, J. Clin. Microbiol. 42:1863-1868, 2004). Increasing the number of IACs for each quantitative PCR (qPCR) sample individually, however, typically reduces sensitivity and, more importantly, the reliability of quantification. Fortunately, current advances in high-throughput qPCR platforms offer the possibility of multiple reactions for a single sample simultaneously, thereby allowing the implementation of more than one IAC concentration per sample. Here, we describe the development of a novel IAC approach that is specifically designed for the state-of-the-art Biotrove OpenArray platform. Different IAC targets were applied at a range of concentrations, yielding a calibration IAC curve for each individual DNA sample. The developed IACs were optimized, tested, and validated by using more than 5,000 unique qPCR amplifications, allowing accurate quantification of microorganisms when applied to soil DNA extracts containing various levels of PCR-inhibiting compounds. To our knowledge, this is the first study using a suite of IACs at different target concentrations to monitor PCR inhibition across a wide target range, thereby allowing reliable and accurate quantification of microorganisms in PCR-inhibiting DNA extracts. The developed IAC is ideally suited for high-throughput screenings of, for example, ecological and agricultural samples on next-generation qPCR platforms., PCR-based detection assays are prone to inhibition by substances present in environmental samples, thereby potentially leading to inaccurate target quantification or false-negative results. Internal amplification controls (IACs) have been developed to help alleviate this problem but are generally applied in a single concentration, thereby yielding less-than-optimal results across the wide range of microbial gene target concentrations possible in environmental samples (J. Hoorfar, B. Malorny, A. Abdulmawjood, N. Cook, M. Wagner, and P. Fach, J. Clin. Microbiol. 42:1863-1868, 2004). Increasing the number of IACs for each quantitative PCR (qPCR) sample individually, however, typically reduces sensitivity and, more importantly, the reliability of quantification. Fortunately, current advances in high-throughput qPCR platforms offer the possibility of multiple reactions for a single sample simultaneously, thereby allowing the implementation of more than one IAC concentration per sample. Here, we describe the development of a novel IAC approach that is specifically designed for the state-of-the-art Biotrove OpenArray platform. Different IAC targets were applied at a range of concentrations, yielding a calibration IAC curve for each individual DNA sample. The developed IACs were optimized, tested, and validated by using more than 5,000 unique qPCR amplifications, allowing accurate quantification of microorganisms when applied to soil DNA extracts containing various levels of PCR-inhibiting compounds. To our knowledge, this is the first study using a suite of IACs at different target concentrations to monitor PCR inhibition across a wide target range, thereby allowing reliable and accurate quantification of microorganisms in PCR-inhibiting DNA extracts. The developed IAC is ideally suited for high-throughput screenings of, for example, ecological and agricultural samples on next-generation qPCR platforms.

PCR-based detection assays are prone to inhibition by substances present in environmental samples, thereby potentially leading to inaccurate target quantification or false-negative results. Internal amplification controls (IACs) have been developed to help alleviate this problem but are generally applied in a single concentration, thereby yielding less-than-optimal results across the wide range of microbial gene target concentrations possible in environmental samples (J. Hoorfar, B. Malorny, A. Abdulmawjood, N. Cook, M. Wagner, and P. Fach, J. Clin. Microbiol. 42:1863-1868, 2004). Increasing the number of IACs for each quantitative PCR (qPCR) sample individually, however, typically reduces sensitivity and, more importantly, the reliability of quantification. Fortunately, current advances in high-throughput qPCR platforms offer the possibility of multiple reactions for a single sample simultaneously, thereby allowing the implementation of more than one IAC concentration per sample. Here, we describe the development of a novel IAC approach that is specifically designed for the state-of-the-art Biotrove OpenArray platform. Different IAC targets were applied at a range of concentrations, yielding a calibration IAC curve for each individual DNA sample. The developed IACs were optimized, tested, and validated by using more than 5,000 unique qPCR amplifications, allowing accurate quantification of microorganisms when applied to soil DNA extracts containing various levels of PCR-inhibiting compounds. To our knowledge, this is the first study using a suite of IACs at different target concentrations to monitor PCR inhibition across a wide target range, thereby allowing reliable and accurate quantification of microorganisms in PCR-inhibiting DNA extracts. The developed IAC is ideally suited for high-throughput screenings of, for example, ecological and agricultural samples on next-generation qPCR platforms., PCR-based detection assays are prone to inhibition by substances present in environmental samples, thereby potentially leading to inaccurate target quantification or false-negative results. Internal amplification controls (IACs) have been developed to help alleviate this problem but are generally applied in a single concentration, thereby yielding less-than-optimal results across the wide range of microbial gene target concentrations possible in environmental samples (J. Hoorfar, B. Malorny, A. Abdulmawjood, N. Cook, M. Wagner, and P. Fach, J. Clin. Microbiol. 42:1863-1868, 2004). Increasing the number of IACs for each quantitative PCR (qPCR) sample individually, however, typically reduces sensitivity and, more importantly, the reliability of quantification. Fortunately, current advances in high-throughput qPCR platforms offer the possibility of multiple reactions for a single sample simultaneously, thereby allowing the implementation of more than one IAC concentration per sample. Here, we describe the development of a novel IAC approach that is specifically designed for the state-of-the-art Biotrove OpenArray platform. Different IAC targets were applied at a range of concentrations, yielding a calibration IAC curve for each individual DNA sample. The developed IACs were optimized, tested, and validated by using more than 5,000 unique qPCR amplifications, allowing accurate quantification of microorganisms when applied to soil DNA extracts containing various levels of PCR-inhibiting compounds. To our knowledge, this is the first study using a suite of IACs at different target concentrations to monitor PCR inhibition across a wide target range, thereby allowing reliable and accurate quantification of microorganisms in PCR-inhibiting DNA extracts. The developed IAC is ideally suited for high-throughput screenings of, for example, ecological and agricultural samples on next-generation qPCR platforms.

Simultaneous detection and identification of multiple pathogenic microorganisms in complex environmental samples are required in numerous diagnostic fields. Here, we describe the development of a novel, background-free ligation detection (LD) system using a single compound detector probe per target. The detector probes used, referred to as padlock probes (PLPs), are long oligonucleotides containing asymmetric target complementary regions at both their 5' and 3' ends which confer extremely specific target detection. Probes also incorporate a desthiobiotin moiety and an internal endonuclease IV cleavage site. DNA samples are PCR amplified, and the resulting products serve as potential targets for PLP ligation. Upon perfect target hybridization, the PLPs are circularized via enzymatic ligation, captured, and cleaved, allowing only the originally ligated PLPs to be visualized on a universal microarray. Unlike previous procedures, the probes themselves are not amplified, thereby ! allowing a simple PLP cleavage to yield a background-free assay. We designed and tested nine PLPs targeting several oomycetes and fungi. All of the probes specifically detected their corresponding targets and provided perfect discrimination against closely related nontarget organisms, yielding an assay sensitivity of 1 pg genomic DNA and a dynamic detection range of 10(4). A practical demonstration with samples collected from horticultural water circulation systems was performed to test the robustness of the newly developed multiplex assay. This novel LD system enables highly specific detection and identification of multiple pathogens over a wide range of target concentrations and should be easily adaptable to a variety of applications in environmental microbiology., Simultaneous detection and identification of multiple pathogenic microorganisms in complex environmental samples are required in numerous diagnostic fields. Here, we describe the development of a novel, background-free ligation detection (LD) system using a single compound detector probe per target. The detector probes used, referred to as padlock probes (PLPs), are long oligonucleotides containing asymmetric target complementary regions at both their 5' and 3' ends which confer extremely specific target detection. Probes also incorporate a desthiobiotin moiety and an internal endonuclease IV cleavage site. DNA samples are PCR amplified, and the resulting products serve as potential targets for PLP ligation. Upon perfect target hybridization, the PLPs are circularized via enzymatic ligation, captured, and cleaved, allowing only the originally ligated PLPs to be visualized on a universal microarray. Unlike previous procedures, the probes themselves are not amplified, thereby ! allowing a simple PLP cleavage to yield a background-free assay. We designed and tested nine PLPs targeting several oomycetes and fungi. All of the probes specifically detected their corresponding targets and provided perfect discrimination against closely related nontarget organisms, yielding an assay sensitivity of 1 pg genomic DNA and a dynamic detection range of 10(4). A practical demonstration with samples collected from horticultural water circulation systems was performed to test the robustness of the newly developed multiplex assay. This novel LD system enables highly specific detection and identification of multiple pathogens over a wide range of target concentrations and should be easily adaptable to a variety of applications in environmental microbiology.

Simultaneous detection and identification of multiple pathogenic microorganisms in complex environmental samples are required in numerous diagnostic fields. Here, we describe the development of a novel, background-free ligation detection (LD) system using a single compound detector probe per target. The detector probes used, referred to as padlock probes (PLPs), are long oligonucleotides containing asymmetric target complementary regions at both their 5' and 3' ends which confer extremely specific target detection. Probes also incorporate a desthiobiotin moiety and an internal endonuclease IV cleavage site. DNA samples are PCR amplified, and the resulting products serve as potential targets for PLP ligation. Upon perfect target hybridization, the PLPs are circularized via enzymatic ligation, captured, and cleaved, allowing only the originally ligated PLPs to be visualized on a universal microarray. Unlike previous procedures, the probes themselves are not amplified, thereby allowing a simple PLP cleavage to yield a background-free assay. We designed and tested nine PLPs targeting several oomycetes and fungi. All of the probes specifically detected their corresponding targets and provided perfect discrimination against closely related nontarget organisms, yielding an assay sensitivity of 1 pg genomic DNA and a dynamic detection range of 10(4). A practical demonstration with samples collected from horticultural water circulation systems was performed to test the robustness of the newly developed multiplex assay. This novel LD system enables highly specific detection and identification of multiple pathogens over a wide range of target concentrations and should be easily adaptable to a variety of applications in environmental microbiology.

PCR-based detection assays are prone to inhibition by substances present in environmental samples, thereby potentially leading to inaccurate target quantification or false-negative results. Internal amplification controls (IACs) have been developed to help alleviate this problem but are generally applied in a single concentration, thereby yielding less-than-optimal results across the wide range of microbial gene target concentrations possible in environmental samples (J. Hoorfar, B. Malorny, A. Abdulmawjood, N. Cook, M. Wagner, and P. Fach, J. Clin. Microbiol. 42: 1863-1868, 2004). Increasing the number of IACs for each quantitative PCR (qPCR) sample individually, however, typically reduces sensitivity and, more importantly, the reliability of quantification. Fortunately, current advances in high-throughput qPCR platforms offer the possibility of multiple reactions for a single sample simultaneously, thereby allowing the implementation of more than one IAC concentration per sample. Here, we describe the development of a novel IAC approach that is specifically designed for the state-of-the-art Biotrove OpenArray platform. Different IAC targets were applied at a range of concentrations, yielding a calibration IAC curve for each individual DNA sample. The developed IACs were optimized, tested, and validated by using more than 5,000 unique qPCR amplifications, allowing accurate quantification of microorganisms when applied to soil DNA extracts containing various levels of PCR-inhibiting compounds. To our knowledge, this is the first study using a suite of IACs at different target concentrations to monitor PCR inhibition across a wide target range, thereby allowing reliable and accurate quantification of microorganisms in PCR-inhibiting DNA extracts. The developed IAC is ideally suited for high-throughput screenings of, for example, ecological and agricultural samples on next-generation qPCR platforms.

Background To maintain EU GMO regulations, producers of new GM crop varieties need to supply an event-specific method for the new variety. As a result methods are nowadays available for EU-authorised genetically modified organisms (GMOs), but only to a limited extent for EU-non-authorised GMOs (NAGs). In the last decade the diversity of genetically modified (GM) ingredients in food and feed has increased significantly. As a result of this increase GMO laboratories currently need to apply many different methods to establish to potential presence of NAGs in raw materials and complex derived products. Results In this paper we present an innovative method for detecting (approved) GMOs as well as the potential presence of NAGs in complex DNA samples containing different crop species. An optimised protocol has been developed for padlock probe ligation in combination with microarray detection (PPLMD) that can easily be scaled up. Linear padlock probes targeted against GMO-events, -elements and -species have been developed that can hybridise to their genomic target DNA and are visualised using microarray hybridisation. In a tenplex PPLMD experiment, different genomic targets in Roundup-Ready soya, MON1445 cotton and Bt176 maize were detected down to at least 1%. In single experiments, the targets were detected down to 0.1%, i.e. comparable to standard qPCR. Conclusion Compared to currently available methods this is a significant step forward towards multiplex detection in complex raw materials and derived products. It is shown that the PPLMD approach is suitable for large-scale detection of GMOs in real-life samples and provides the possibility to detect and/or identify NAGs that would otherwise remain undetected

Background: Diagnostics and disease-management strategies require technologies to enable the simultaneous detection and quantification of a wide range of pathogenic microorganisms. Most multiplex, quantitative detection methods available suffer from compromises between the level of multiplexing, throughput and accuracy of quantification. Here, we demonstrate the efficacy of a novel, high-throughput, ligation-based assay for simultaneous quantitative detection of multiple plant pathogens. The ligation probes, designated Plant Research International-lock probes (PRI-lock probes), are long oligonucleotides with target complementary regions at their 5′ and 3′ ends. Upon perfect target hybridization, the PRI-lock probes are circularized via enzymatic ligation, subsequently serving as template for individual, standardized amplification via unique probe-specific primers. Adaptation to OpenArrays™, which can accommodate up to 3072 33 nl PCR amplifications, allowed high-throughput real-time quantification. The assay combines the multiplex capabilities and specificity of ligation reactions with high-throughput real-time PCR in the OpenArray™, resulting in a flexible, quantitative multiplex diagnostic system. Results: The performance of the PRI-lock detection system was demonstrated using 13 probes targeting several significant plant pathogens at different taxonomic levels. All probes specifically detected their corresponding targets and provided perfect discrimination against non-target organisms with very similar ligation target sites. The nucleic acid targets could be reliably quantified over 5 orders of magnitude with a dynamic detection range of more than 104. Pathogen quantification was equally robust in single target versus mixed target assays. Conclusion: This novel assay enables very specific, high-throughput, quantitative detection of multiple pathogens over a wide range of target concentrations and should be easily adaptable for versatile diagnostic purposes. © 2007

Background Diagnostics and disease-management strategies require technologies to enable the simultaneous detection and quantification of a wide range of pathogenic microorganisms. Most multiplex, quantitative detection methods available suffer from compromises between the level of multiplexing, throughput and accuracy of quantification. Here, we demonstrate the efficacy of a novel, high-throughput, ligation-based assay for simultaneous quantitative detection of multiple plant pathogens. The ligation probes Results The performance of the PRI-lock detection system was demonstrated using 13 probes targeting several significant plant pathogens at different taxonomic levels. All probes specifically detected their corresponding targets and provided perfect discrimination against non-target organisms with very similar ligation target sites. The nucleic acid targets could be reliably quantified over 5 orders of magnitude with a dynamic detection range of more than 104. Pathogen quantification was equally robust i Conclusion This novel assay enables very specific, high-throughput, quantitative detection of multiple pathogens over a wide range of target concentrations and should be easily adaptable for versatile diagnostic purposes., Background Diagnostics and disease-management strategies require technologies to enable the simultaneous detection and quantification of a wide range of pathogenic microorganisms. Most multiplex, quantitative detection methods available suffer from compromises between the level of multiplexing, throughput and accuracy of quantification. Here, we demonstrate the efficacy of a novel, high-throughput, ligation-based assay for simultaneous quantitative detection of multiple plant pathogens. The ligation probes Results The performance of the PRI-lock detection system was demonstrated using 13 probes targeting several significant plant pathogens at different taxonomic levels. All probes specifically detected their corresponding targets and provided perfect discrimination against non-target organisms with very similar ligation target sites. The nucleic acid targets could be reliably quantified over 5 orders of magnitude with a dynamic detection range of more than 104. Pathogen quantification was equally robust i Conclusion This novel assay enables very specific, high-throughput, quantitative detection of multiple pathogens over a wide range of target concentrations and should be easily adaptable for versatile diagnostic purposes.

Background Diagnostics and disease-management strategies require technologies to enable the simultaneous detection and quantification of a wide range of pathogenic microorganisms. Most multiplex, quantitative detection methods available suffer from compromises between the level of multiplexing, throughput and accuracy of quantification. Here, we demonstrate the efficacy of a novel, high-throughput, ligation-based assay for simultaneous quantitative detection of multiple plant pathogens. The ligation probes Results The performance of the PRI-lock detection system was demonstrated using 13 probes targeting several significant plant pathogens at different taxonomic levels. All probes specifically detected their corresponding targets and provided perfect discrimination against non-target organisms with very similar ligation target sites. The nucleic acid targets could be reliably quantified over 5 orders of magnitude with a dynamic detection range of more than 104. Pathogen quantification was equally robust i Conclusion This novel assay enables very specific, high-throughput, quantitative detection of multiple pathogens over a wide range of target concentrations and should be easily adaptable for versatile diagnostic purposes., Background Diagnostics and disease-management strategies require technologies to enable the simultaneous detection and quantification of a wide range of pathogenic microorganisms. Most multiplex, quantitative detection methods available suffer from compromises between the level of multiplexing, throughput and accuracy of quantification. Here, we demonstrate the efficacy of a novel, high-throughput, ligation-based assay for simultaneous quantitative detection of multiple plant pathogens. The ligation probes Results The performance of the PRI-lock detection system was demonstrated using 13 probes targeting several significant plant pathogens at different taxonomic levels. All probes specifically detected their corresponding targets and provided perfect discrimination against non-target organisms with very similar ligation target sites. The nucleic acid targets could be reliably quantified over 5 orders of magnitude with a dynamic detection range of more than 104. Pathogen quantification was equally robust i Conclusion This novel assay enables very specific, high-throughput, quantitative detection of multiple pathogens over a wide range of target concentrations and should be easily adaptable for versatile diagnostic purposes.

The present invention relates to a novel multiplex detection of nucleic acid targets in a sample. This is accomplished by using novel padlock probes which contain a unique cleavage site for linearization and a first member of a binding pair for isolation of the padlock probe from the sample. Three different designs of the padlock probes are described and examples are shown for ligation, amplification and qualitative and quantitative detection. The combination of these features gives a fast, accurate and specific multiplex detection assay

Background: Diagnostics and disease-management strategies require technologies to enable the simultaneous detection and quantification of a wide range of pathogenic microorganisms. Most multiplex, quantitative detection methods available suffer from compromises between the level of multiplexing, throughput and accuracy of quantification. Here, we demonstrate the efficacy of a novel, high-throughput, ligation-based assay for simultaneous quantitative detection of multiple plant pathogens. The ligation probes, designated Plant Research International-lock probes (PRI-lock probes), are long oligonucleotides with target complementary regions at their 5′ and 3′ ends. Upon perfect target hybridization, the PRI-lock probes are circularized via enzymatic ligation, subsequently serving as template for individual, standardized amplification via unique probe-specific primers. Adaptation to OpenArrays™, which can accommodate up to 3072 33 nl PCR amplifications, allowed high-throughput real-time quantification. The assay combines the multiplex capabilities and specificity of ligation reactions with high-throughput real-time PCR in the OpenArray™, resulting in a flexible, quantitative multiplex diagnostic system. Results: The performance of the PRI-lock detection system was demonstrated using 13 probes targeting several significant plant pathogens at different taxonomic levels. All probes specifically detected their corresponding targets and provided perfect discrimination against non-target organisms with very similar ligation target sites. The nucleic acid targets could be reliably quantified over 5 orders of magnitude with a dynamic detection range of more than 104. Pathogen quantification was equally robust in single target versus mixed target assays. Conclusion: This novel assay enables very specific, high-throughput, quantitative detection of multiple pathogens over a wide range of target concentrations and should be easily adaptable for versatile diagnostic purposes. © 2007

Background - Diagnostics and disease-management strategies require technologies to enable the simultaneous detection and quantification of a wide range of pathogenic microorganisms. Most multiplex, quantitative detection methods available suffer from compromises between the level of multiplexing, throughput and accuracy of quantification. Here, we demonstrate the efficacy of a novel, high-throughput, ligation-based assay for simultaneous quantitative detection of multiple plant pathogens. The ligation probes, designated Plant Research International-lock probes (PRI-lock probes), are long oligonucleotides with target complementary regions at their 5' and 3' ends. Upon perfect target hybridization, the PRI-lock probes are circularized via enzymatic ligation, subsequently serving as template for individual, standardized amplification via unique probe-specific primers. Adaptation to OpenArrays¿, which can accommodate up to 3072 33 nl PCR amplifications, allowed high-throughput real-time quantification. The assay combines the multiplex capabilities and specificity of ligation reactions with high-throughput real-time PCR in the OpenArray¿, resulting in a flexible, quantitative multiplex diagnostic system. Results - The performance of the PRI-lock detection system was demonstrated using 13 probes targeting several significant plant pathogens at different taxonomic levels. All probes specifically detected their corresponding targets and provided perfect discrimination against non-target organisms with very similar ligation target sites. The nucleic acid targets could be reliably quantified over 5 orders of magnitude with a dynamic detection range of more than 104. Pathogen quantification was equally robust in single target versus mixed target assays. Conclusion - This novel assay enables very specific, high-throughput, quantitative detection of multiple pathogens over a wide range of target concentrations and should be easily adaptable for versatile diagnostic purposes.

Met de nieuwe pUMA techniek (padlock based Universal Multiplex detection Array techniek) kunnen zes pathogenen in een monster simultaan worden gedetecteerd.

Padlock probes (PLPs) are long oligonucleotides, whose ends are complementary to adjacent target sequences. Upon hybridization to the target, the two ends are brought into contact, allowing PLP circularization by ligation. PLPs provide extremely specific target recognition, which is followed by universal amplification and microarray detection. Since target recognition is separated from downstream processing, PLPs enable the development of flexible and extendable diagnostic systems, targeting diverse organisms. To adapt padlock technology for diagnostic purposes, we optimized PLP design to ensure high specificity and eliminating ligation on non-target sequences under real-world assay conditions. We designed and tested 11 PLPs to target various plant pathogens at the genus, species and subspecies levels, and developed a prototype PLP-based plant health chip. Excellent specificity was demonstrated toward the target organisms. Assay background was determined for each hybridization using a no-target reference sample, which provided reliable and sensitive identification of positive samples. A sensitivity of 5 pg genomic DNA and a dynamic range of detection of 100 were observed. The developed multiplex diagnostic system was validated using genomic DNAs of characterized isolates and artificial mixtures thereof. The demonstrated system is adaptable to a wide variety of applications ranging from pest management to environmental microbiology

Molecular beacon probes can be employed in a NASBA amplicon detection system to generate a specific fluorescent signal concomitantly with amplification. A molecular beacon, designed to hybridize within the target sequence, was introduced into NASBA reactions that amplify the genomic RNA of potato leafroll virus (PLRV). During amplification, the probe anneals to the antisense RNA amplicon generated by NASBA, producing a specific fluorescent signal that can be monitored in real-time. The assay is rapid, sensitive and specific. As RNA amplification and detection can be carried out in unopened vessels, it minimizes the risk of carry-over contaminations. Robustness has been verified on real-world samples. This homogeneous assay, called AmpliDet RNA, is a significant improvement over current detection methods for NASBA amplicons and is suitable for one-tube applications ranging from high-throughput diagnostics to in vivo studies of biological activities.