Search

Ultrasonic metal welding machines are suitable for various complex applications (e.g., battery tabs) through unique mechanical design, special pressure application methods and high-precision welding. This work reports the weldability, forming quality and fractographic analysis of copper multilayered welded joints which were studied by SEM-EDS characterization, micro-hardness testing and tensile testing based on ultrasonic double roller welding (UDRW). Three groups of process parameters (A, B and C) were established to investigate the performance, production quality and welded joint surface interconnections. The tensile testing results of sample under parameter 3 in group A [S-P3(A)] indicate the maximum tensile strength of 69.859 N in T-peel test while the average tensile strength has increased by 58.525 N due to rise in welding time from 2 sec to 5 sec. The results analysis indicates that welding quality features in S-P3(A) joints under 4 bar, 100 mm/s, 45 % have been exploited. The over-welded zone was transformed into good-welded zone. The micro-cracks, fatigue stations and peeling texture in multilayers were reduced. It was found that when the welding energy was 10000 J then the tearing edges and interlayers cracks were minimized while keeping the other parameters constant. Moreover, when the amplitude increased up to 50 %, then numerous micro-cracks and micro-fissure stations were created, which leads to the occurrence of fracture in multi-layer welded joint. The EDS study investigated that the complex features are formed at the interface junction of sample 3 S3(A) in multilayer welds. The complex multilayer microstructures can induce and produce unique hardness properties for battery manufacturing. It leads to high quality and durable welds. Eventually, it is experimentally demonstrated that robust 40 layer welded joints can be obtained by the UDRW process. Data availability: The datasets used and/or analyzed during the current study are available from the cor

Ultrasonic metal welding machines are suitable for various complex applications (e.g., battery tabs) through unique mechanical design, special pressure application methods and high-precision welding. This work reports the weldability, forming quality and fractographic analysis of copper multilayered welded joints which were studied by SEM-EDS characterization, micro-hardness testing and tensile testing based on ultrasonic double roller welding (UDRW). Three groups of process parameters (A, B and C) were established to investigate the performance, production quality and welded joint surface interconnections. The tensile testing results of sample under parameter 3 in group A [S-P3(A)] indicate the maximum tensile strength of 69.859 N in T-peel test while the average tensile strength has increased by 58.525 N due to rise in welding time from 2 sec to 5 sec. The results analysis indicates that welding quality features in S-P3(A) joints under 4 bar, 100 mm/s, 45 % have been exploited. The over-welded zone was transformed into good-welded zone. The micro-cracks, fatigue stations and peeling texture in multilayers were reduced. It was found that when the welding energy was 10000 J then the tearing edges and interlayers cracks were minimized while keeping the other parameters constant. Moreover, when the amplitude increased up to 50 %, then numerous micro-cracks and micro-fissure stations were created, which leads to the occurrence of fracture in multi-layer welded joint. The EDS study investigated that the complex features are formed at the interface junction of sample 3 S3(A) in multilayer welds. The complex multilayer microstructures can induce and produce unique hardness properties for battery manufacturing. It leads to high quality and durable welds. Eventually, it is experimentally demonstrated that robust 40 layer welded joints can be obtained by the UDRW process. Data availability: The datasets used and/or analyzed during the current study are available from the cor

Ultrasonic metal welding machines are suitable for various complex applications (e.g., battery tabs) through unique mechanical design, special pressure application methods and high-precision welding. This work reports the weldability, forming quality and fractographic analysis of copper multilayered welded joints which were studied by SEM-EDS characterization, micro-hardness testing and tensile testing based on ultrasonic double roller welding (UDRW). Three groups of process parameters (A, B and C) were established to investigate the performance, production quality and welded joint surface interconnections. The tensile testing results of sample under parameter 3 in group A [S-P3(A)] indicate the maximum tensile strength of 69.859 N in T-peel test while the average tensile strength has increased by 58.525 N due to rise in welding time from 2 sec to 5 sec. The results analysis indicates that welding quality features in S-P3(A) joints under 4 bar, 100 mm/s, 45 % have been exploited. The over-welded zone was transformed into good-welded zone. The micro-cracks, fatigue stations and peeling texture in multilayers were reduced. It was found that when the welding energy was 10000 J then the tearing edges and interlayers cracks were minimized while keeping the other parameters constant. Moreover, when the amplitude increased up to 50 %, then numerous micro-cracks and micro-fissure stations were created, which leads to the occurrence of fracture in multi-layer welded joint. The EDS study investigated that the complex features are formed at the interface junction of sample 3 S3(A) in multilayer welds. The complex multilayer microstructures can induce and produce unique hardness properties for battery manufacturing. It leads to high quality and durable welds. Eventually, it is experimentally demonstrated that robust 40 layer welded joints can be obtained by the UDRW process. Data availability: The datasets used and/or analyzed during the current study are available from the cor

Ultrasonic metal welding machines are suitable for various complex applications (e.g., battery tabs) through unique mechanical design, special pressure application methods and high-precision welding. This work reports the weldability, forming quality and fractographic analysis of copper multilayered welded joints which were studied by SEM-EDS characterization, micro-hardness testing and tensile testing based on ultrasonic double roller welding (UDRW). Three groups of process parameters (A, B and C) were established to investigate the performance, production quality and welded joint surface interconnections. The tensile testing results of sample under parameter 3 in group A [S-P3(A)] indicate the maximum tensile strength of 69.859 N in T-peel test while the average tensile strength has increased by 58.525 N due to rise in welding time from 2 sec to 5 sec. The results analysis indicates that welding quality features in S-P3(A) joints under 4 bar, 100 mm/s, 45 % have been exploited. The over-welded zone was transformed into good-welded zone. The micro-cracks, fatigue stations and peeling texture in multilayers were reduced. It was found that when the welding energy was 10000 J then the tearing edges and interlayers cracks were minimized while keeping the other parameters constant. Moreover, when the amplitude increased up to 50 %, then numerous micro-cracks and micro-fissure stations were created, which leads to the occurrence of fracture in multi-layer welded joint. The EDS study investigated that the complex features are formed at the interface junction of sample 3 S3(A) in multilayer welds. The complex multilayer microstructures can induce and produce unique hardness properties for battery manufacturing. It leads to high quality and durable welds. Eventually, it is experimentally demonstrated that robust 40 layer welded joints can be obtained by the UDRW process. Data availability: The datasets used and/or analyzed during the current study are available from the cor

Ultrasonic metal welding machines are suitable for various complex applications (e.g., battery tabs) through unique mechanical design, special pressure application methods and high-precision welding. This work reports the weldability, forming quality and fractographic analysis of copper multilayered welded joints which were studied by SEM-EDS characterization, micro-hardness testing and tensile testing based on ultrasonic double roller welding (UDRW). Three groups of process parameters (A, B and C) were established to investigate the performance, production quality and welded joint surface interconnections. The tensile testing results of sample under parameter 3 in group A [S-P3(A)] indicate the maximum tensile strength of 69.859 N in T-peel test while the average tensile strength has increased by 58.525 N due to rise in welding time from 2 sec to 5 sec. The results analysis indicates that welding quality features in S-P3(A) joints under 4 bar, 100 mm/s, 45 % have been exploited. The over-welded zone was transformed into good-welded zone. The micro-cracks, fatigue stations and peeling texture in multilayers were reduced. It was found that when the welding energy was 10000 J then the tearing edges and interlayers cracks were minimized while keeping the other parameters constant. Moreover, when the amplitude increased up to 50 %, then numerous micro-cracks and micro-fissure stations were created, which leads to the occurrence of fracture in multi-layer welded joint. The EDS study investigated that the complex features are formed at the interface junction of sample 3 S3(A) in multilayer welds. The complex multilayer microstructures can induce and produce unique hardness properties for battery manufacturing. It leads to high quality and durable welds. Eventually, it is experimentally demonstrated that robust 40 layer welded joints can be obtained by the UDRW process. Data availability: The datasets used and/or analyzed during the current study are available from the cor

Ultrasonic metal welding machines are suitable for various complex applications (e.g., battery tabs) through unique mechanical design, special pressure application methods and high-precision welding. This work reports the weldability, forming quality and fractographic analysis of copper multilayered welded joints which were studied by SEM-EDS characterization, micro-hardness testing and tensile testing based on ultrasonic double roller welding (UDRW). Three groups of process parameters (A, B and C) were established to investigate the performance, production quality and welded joint surface interconnections. The tensile testing results of sample under parameter 3 in group A [S-P3(A)] indicate the maximum tensile strength of 69.859 N in T-peel test while the average tensile strength has increased by 58.525 N due to rise in welding time from 2 sec to 5 sec. The results analysis indicates that welding quality features in S-P3(A) joints under 4 bar, 100 mm/s, 45 % have been exploited. The over-welded zone was transformed into good-welded zone. The micro-cracks, fatigue stations and peeling texture in multilayers were reduced. It was found that when the welding energy was 10000 J then the tearing edges and interlayers cracks were minimized while keeping the other parameters constant. Moreover, when the amplitude increased up to 50 %, then numerous micro-cracks and micro-fissure stations were created, which leads to the occurrence of fracture in multi-layer welded joint. The EDS study investigated that the complex features are formed at the interface junction of sample 3 S3(A) in multilayer welds. The complex multilayer microstructures can induce and produce unique hardness properties for battery manufacturing. It leads to high quality and durable welds. Eventually, it is experimentally demonstrated that robust 40 layer welded joints can be obtained by the UDRW process. Data availability: The datasets used and/or analyzed during the current study are available from the cor

The ultrasonic metal welding technology is widely promoted as a new connection approach in the field of current energy vehicle wiring harness connection. In the present investigation, low-temperature mechanical properties of slotted and normal terminals were studied. The EVR 25 mm2 copper wires are selected for welding using ultrasonic wire harness welding with two different structures of T2 copper terminals. Then, a more stable joint structure under the same welding parameters is investigated through tensile tests at − 30 °C and 25 °C. The results showed that the ST joint has higher static mechanical properties than the NT joint at 25 °C and the peak load of the joint is increased. In addition, the results investigated that the performance and welded interface texture of ST joints is reliable than NT joints under 25 °C, the maximum joint load is increased by 12.93% under − 30 °C, the joint energy absorption is increased by 87.58%, and ST joint stability is better and safer in actual production applications. At the same welding parameters, the ST joints have less neck contraction at 25 °C and the ligamentous sockets are smaller and densely welded surfaces. The failures of ST joints and NT joints are investigated under the same welding parameters. The energy loss during the ST joint welding process is smaller and the welding effect is better and advantageous. The SEM findings showed that the failure of the ST joint and the NT joint is different and the tensile strength of the ST joint is greater under the same low-temperature conditions. © International Institute of Welding 2024.