Search

Climate change is recognized as one of the greatest challenges of 21st century. This study investigated climate and hydrological regimes of the high-altitude Indus basin for the historical period and extreme scenarios of future climate during 21st century. Improved datasets of precipitation and temperature were developed and forced to a fully-distributed physically-based energy-balance Variable Infiltration Capacity (VIC) hydrological model to simulate the water balance at regional and sub-basin scale. Relative to historical baseline, the results revealed highly contrasting signals of climate and hydrological regime changes. Against an increase of 0.6 °C during the last 40 years, the median annual air temperature is projected to increase further between 0.8 and 5.7 °C by the end of 21st century. Similarly, a decline of 11.9% in annual precipitation is recorded, but future projections are highly conflicting and spatially variable. The Karakoram region is anticipated to receive more precipitation, while SW-Hindukush and parts of W-Himalayan region may experience decline in precipitation. The Model for Interdisciplinary Research On Climate version-5 (MIROC5) generally shows increases, while Max Planck Institute Earth System Model at base resolution (MPI-ESM-LR) indicates decreases in precipitation and river inflows under three Representative Concentration Pathways (RCPs) of 2.6, 4.5 and 8.5. Indus-Tarbela inflows are more likely to increase compared to Kabul, Jhelum and Chenab river inflows. Substantial increase in the magnitudes of peak flows and one-month earlier attainment is projected for all river gauges. High flows are anticipated to increase under most scenarios, while low flows may decrease for MPI-ESM-LR in Jhelum, Chenab and Kabul river basins. Hence, hydrological extremes are likely to be intensified. Critical modifications in the strategies and action plans for hydropower generation, construction and operation of storage reservoirs, irrigation withdrawals

Climate change is recognized as one of the greatest challenges of 21st century. This study investigated climate and hydrological regimes of the high-altitude Indus basin for the historical period and extreme scenarios of future climate during 21st century. Improved datasets of precipitation and temperature were developed and forced to a fully-distributed physically-based energy-balance Variable Infiltration Capacity (VIC) hydrological model to simulate the water balance at regional and sub-basin scale. Relative to historical baseline, the results revealed highly contrasting signals of climate and hydrological regime changes. Against an increase of 0.6 °C during the last 40 years, the median annual air temperature is projected to increase further between 0.8 and 5.7 °C by the end of 21st century. Similarly, a decline of 11.9% in annual precipitation is recorded, but future projections are highly conflicting and spatially variable. The Karakoram region is anticipated to receive more precipitation, while SW-Hindukush and parts of W-Himalayan region may experience decline in precipitation. The Model for Interdisciplinary Research On Climate version-5 (MIROC5) generally shows increases, while Max Planck Institute Earth System Model at base resolution (MPI-ESM-LR) indicates decreases in precipitation and river inflows under three Representative Concentration Pathways (RCPs) of 2.6, 4.5 and 8.5. Indus-Tarbela inflows are more likely to increase compared to Kabul, Jhelum and Chenab river inflows. Substantial increase in the magnitudes of peak flows and one-month earlier attainment is projected for all river gauges. High flows are anticipated to increase under most scenarios, while low flows may decrease for MPI-ESM-LR in Jhelum, Chenab and Kabul river basins. Hence, hydrological extremes are likely to be intensified. Critical modifications in the strategies and action plans for hydropower generation, construction and operation of storage reservoirs, irrigation withdrawals

See PDF

See PDF

Broadband communications consists of the technologies and equipment required to deliver packet-based digital voice, video, and data services to end users. Broadband affords end users high-speed, always-on access to the Internet while affording service providers the ability to offer value-added services to increase revenues. Due to the growth of the Internet, there has been tremendous buildout of high-speed, inter-city communications links that connect population centers and Internet service providers (ISPs) points of presence (PoPs) around the world. This build out of the backbone infrastructure or core network has occurred primarily via optical transport technology. Broadband access technologies are being deployed to address the bandwidth bottleneck for the "last mile," the connection of homes and small businesses to this infrastructure. One important aspect of broadband access to the home is that it allows people to telecommute effectively by providing a similar environment as when they are physically present in their office: simultaneous telephone and computer access, high-speed Internet and intranet access for e-mail, file sharing, and access to corporate servers., Comment: 16 pages

Local multipoint distribution system (LMDS) uses cellular-like network architecture of microwave radios placed at the client's location and at the company's base station to deliver fixed services, mainly telephony, video and Internet access. The use of time-division multiple access (TDMA) and FDMA (frequency DMA) technology allows multiple customers within a 3-5 mile coverage radius to share the same radio channel. Customers can receive data rates between 64kbps to 155Mbps. LMDS was conceived as a broadband, fixed wireless, point-to-multipoint technology for utilization in the last mile. Throughput capacity and reliable distance of the link depends on common radio link constraints and the modulation method used - either phase-shift keying or amplitude modulation. In general deployment links of up to 5 miles (8 km) from the base station are possible, but distance is typically limited to about 1.5 miles due to rain fading attenuation constraints. Point-to-point systems are also capable of using the LMDS frequencies and can reach slightly farther distances due to increased antenna gain.LMDS uses a scalable architecture combined with industry standards to ensure service can be expanded as customer demand increases., Comment: 7 Pages

Software testing is a critical element of software quality assurance and represents the ultimate review of specification, design and coding. Software testing is the process of testing the functionality and correctness of software by running it. Software testing is usually performed for one of two reasons: defect detection, and reliability estimation. The problem of applying software testing to defect detection is that software can only suggest the presence of flaws, not their absence (unless the testing is exhaustive). The problem of applying software testing to reliability estimation is that the input distribution used for selecting test cases may be flawed. The key to software testing is trying to find the modes of failure - something that requires exhaustively testing the code on all possible inputs. Software Testing, depending on the testing method employed, can be implemented at any time in the development process., Comment: 10 Pages

The UML allows us to specify models in a precise, complete and unambiguous manner. In particular, the UML addresses the specification of all important decisions regarding analysis, design and implementation. Although UML is not a visual programming language, its models can be directly connected to a vast variety of programming languages. This enables a dual approach to software development: the developer has a choice as to the means of input. UML can be used directly, from which code can be generated; or on the other hand, that which is best expressed as text can be entered into the program as code. In an ideal world, the UML tool will be able to reverse-engineer any direct changes to code and the UML representations will be kept in sync with the code. However, without human intervention this is not always possible. There are certain elements of information that are lost when moving from models to code. Even then, there are certain aspects of programming language code do seem to preserve more of their semantics and therefore permits automatic reverse-engineering of code back to a subset of the UML models., Comment: 19 Pages

The Global Positioning System (GPS) is a U.S. space-based radionavigation system that provides reliable positioning, navigation, and timing services to civilian users on a continuous worldwide basis -- freely available to all. GPS provides specially coded satellite signals that can be processed in a GPS receiver, enabling the receiver to compute position, velocity and time. Basically GPS works by using four GPS satellite signals to compute positions in three dimensions (and the time offset) in the receiver clock. GPS provides accurate location and time information for an unlimited number of people in all weather, day and night, anywhere in the world. Anyone who needs to keep track of where he or she is, to find his or her way to a specified location, or know what direction and how fast he or she is going can utilize the benefits of the global positioning system. Everyday activities such as banking, mobile phone operations, and even the control of power grids, are facilitated by the accurate timing provided by GPS., Comment: 9 Pages