1. Optimizing capacitance performance: Solar pyrolysis of lignocellulosic biomass for homogeneous porosity in carbon production
- Author
-
Universidad Nacional Autónoma de México, Consejo Nacional de Humanidades, Ciencias y Tecnologías (México), Amazon, Lobato Peralta, Diego Ramón [0000-0003-4534-5195], Arreola Ramos, Carlos E. [0000-0003-4770-8340], Ayala Cortés, Alejandro [0000-0003-3933-5820], Pacheco-Catalán, D. [0000-0003-3412-7459], Muñiz Soria, Jesús [0000-0002-7165-0268], Okoye, Patrick U. [0000-0003-2974-0582], Villafán, Heidi Isabel [0000-0002-0798-1361], Arancibia Bulnes, Camilo A. [0000-0001-6782-0116], Cuentas Gallegos, A. K. [0000-0003-4516-8889], Cuentas Gallegos, A. K. [akcg@ens.cnyn.unam.mx], Lobato Peralta, Diego Ramón, Arreola Ramos, Carlos E., Ayala Cortés, Alejandro, Pacheco-Catalán, D., Robles, Miguel, Guillén López, Alfredo, Muñiz Soria, Jesús, Okoye, Patrick U., Villafán, Heidi Isabel, Arancibia Bulnes, Camilo A., Cuentas Gallegos, A. K., Universidad Nacional Autónoma de México, Consejo Nacional de Humanidades, Ciencias y Tecnologías (México), Amazon, Lobato Peralta, Diego Ramón [0000-0003-4534-5195], Arreola Ramos, Carlos E. [0000-0003-4770-8340], Ayala Cortés, Alejandro [0000-0003-3933-5820], Pacheco-Catalán, D. [0000-0003-3412-7459], Muñiz Soria, Jesús [0000-0002-7165-0268], Okoye, Patrick U. [0000-0003-2974-0582], Villafán, Heidi Isabel [0000-0002-0798-1361], Arancibia Bulnes, Camilo A. [0000-0001-6782-0116], Cuentas Gallegos, A. K. [0000-0003-4516-8889], Cuentas Gallegos, A. K. [akcg@ens.cnyn.unam.mx], Lobato Peralta, Diego Ramón, Arreola Ramos, Carlos E., Ayala Cortés, Alejandro, Pacheco-Catalán, D., Robles, Miguel, Guillén López, Alfredo, Muñiz Soria, Jesús, Okoye, Patrick U., Villafán, Heidi Isabel, Arancibia Bulnes, Camilo A., and Cuentas Gallegos, A. K.
- Abstract
This work compares the effect of using a solar reactor against a conventional electrical furnace to obtain carbon materials by pyrolysis of a lignocellulosic precursor. The solar reactor is directly irradiated and includes modifications to improve the control of the process and the reproducibility of solar experiments. A bagasse of agave creole was selected as the lignocellulosic precursor or biomass to obtain carbon materials at temperatures of 700 °C. Comparing carbons produced by conventional and solar pyrolysis, higher crystallinity and lower hydrophilicity are evident in the former. Moreover, conventional pyrolysis tends to promote a more homogeneous porous structure in comparison to solar pyrolysis. However, within the spectrum of solar carbons produced, the morphology of biomass plays a crucial role in influencing the chemical composition and porosity properties. Specifically, the use of fibers instead of powders to produce carbons through solar pyrolysis results in a more homogeneous porosity, attributed to an enhanced volumetric absorption of solar radiation. This modification leads to a significant improvement in capacitance, increasing from 125 F/g to 175 F/g at 5 mV/s in aqueous electrolytes. The carbons from the solar furnace are reproducible, underlying the potential of the proposed process towards a sustainable alternative. To achieve a theoretical reference, the pyrolysis process was mimic trough Reactive Molecular Dynamics calculations modeling the initial structural conditions of agave biomass with its corresponding lignocellulosic components and considering analogous thermal conditions. The resulting carbon structures at the end of the simulations showed structural properties that are consistent with those observed in the pair distribution functions obtained from XRD and the pore size distribution from physisorption analyses. This combined experimental–theoretical approach offers the potential to elucidate porous carbon structures derived from pyr
- Published
- 2024