Search

In this paper, seismic bearing capacity factors for shallow strip foundations embedded in homogeneous c-ϕ soil slopes are presented. A numerical study is performed using finite-element limit analysis (FELA) with lower bound (LB), upper bound (UB), and 15-node (15N) mixed Gauss element formulations. The pseudostatic approach is used to consider the seismic action on both soil and foundation. The study explores the influence of different governing parameters, namely slope angle (β), angle of internal friction (ϕ), foundation embedment depth ratio (D/B, where D = depth of the footing from slope surface; and B = width), and horizontal seismic coefficient (αh), on the ultimate bearing capacity of the embedded strip foundation. The bearing capacity factors Ncs and Nγqs decrease rapidly with an increase in β and αh, and an increase with D. Compared with Ncs, the factor Nγqs is more sensitive to the changes in β,ϕ, D/B, and αh. Based on the results obtained from the study, a set of design charts and a simple spreadsheet-based tool (SBCSFES) are developed.

A novel unconventional pseudostatic analysis is proposed here to infer on the sensitivity of a landslide to earthquakes characterized by different physical properties. Several sine waves with different amplitudes, frequencies and phases were applied to the landslide mass assuming limit equilibrium conditions. The unconventional approach was used for the Diezma landslide case study. The landslide is located 25 km from the city of Granada (Spain). Although the slope had repeatedly suffered small-scale stability problems since the construction of the A-92 highway, a larger failure occurred on 18 March 2001 and damaged the highway between kilometers 272.6 and 272.8. The landslide had an estimated volume of 1.2 Mm3 and involved a disordered deposit of silt and clay with heterometric blocks within the Numidoide Formation, which outcrops along the contact between the Maláguide and Dorsal domains of the Betic Cordillera mountain range. Despite the 18 million Euros spent since 1999 on geotechnical investigations and stabilization solutions, the numerous reactivations that occurred through 2010 and 2013 demonstrate the persistent activity of the landslide. The geometry of the large slope failure corresponding to the first activation of the Diezma landslide was used to back-analyze the stability of the slope based on a high-resolution engineering-geological model. The model was developed from the analysis of numerous borehole logs as well as from geophysical investigations consisting of seismic noise measurements. The results demonstrate that the safety factor (SF) of the Diezma landslide varies significantly for frequencies less than 1 Hz; moreover, unstable conditions are reached at frequency values between 0.5 and 1 Hz for water pressure distributions corresponding to Bishop factors (ru) between 0 and 0.36. To estimate the co-seismic displacements, the geometrical and mechanical properties of the landslide mass were used to derive its characteristic periods for thickness (T

A novel unconventional pseudostatic analysis is proposed here to infer on the sensitivity of a landslide to earthquakes characterized by different physical properties. Several sine waves with different amplitudes, frequencies and phases were applied to the landslide mass assuming limit equilibrium conditions. The unconventional approach was used for the Diezma landslide case study. The landslide is located 25 km from the city of Granada (Spain). Although the slope had repeatedly suffered small-scale stability problems since the construction of the A-92 highway, a larger failure occurred on 18 March 2001 and damaged the highway between kilometers 272.6 and 272.8. The landslide had an estimated volume of 1.2 Mm3 and involved a disordered deposit of silt and clay with heterometric blocks within the Numidoide Formation, which outcrops along the contact between the Maláguide and Dorsal domains of the Betic Cordillera mountain range. Despite the 18 million Euros spent since 1999 on geotechnical investigations and stabilization solutions, the numerous reactivations that occurred through 2010 and 2013 demonstrate the persistent activity of the landslide. The geometry of the large slope failure corresponding to the first activation of the Diezma landslide was used to back-analyze the stability of the slope based on a high-resolution engineering-geological model. The model was developed from the analysis of numerous borehole logs as well as from geophysical investigations consisting of seismic noise measurements. The results demonstrate that the safety factor (SF) of the Diezma landslide varies significantly for frequencies less than 1 Hz; moreover, unstable conditions are reached at frequency values between 0.5 and 1 Hz for water pressure distributions corresponding to Bishop factors (ru) between 0 and 0.36. To estimate the co-seismic displacements, the geometrical and mechanical properties of the landslide mass were used to derive its characteristic periods for thickness (T